Develop Bugs

PAC MAN 20.1 [PrimoC] Wifi Broken

http://forum.xda-developers.com/showthread.php?t=1948034&page=35
I can't post to the thread because I haven't posted enough on XDA to post in developer threads yet apparently. Needless to say the latest PAC MAN release, wifi is broken.
There is one person who asks "Why is wifi still broken?" but it seems to have been glanced over. I have fully wiped and installed, and Wifi is in a permanent state of starting, scanning, turning off, turning back on, scanning, turning off, turning back on, scanning, ... in an infinite loop. It did this when I upgraded from 20.0, and did it after I did a full wipe as well.
I'm trying to find a 4.2.x rom that has preferably all the hardware working (wifi, camera, and bluetooth being the most important short of the phone functionality) that doesn't suffer from the random lockscreen reboot. If someone has a suggestion on which PrimoC Rom fits that bill please let me know.
I apologize for not posting this in the appropriate place, but I'm not allowed to post it in an the appropriate place until I post more.

... It would be nice if someone could mention this to inyourface to let him know, since you know, I can't.

http://forum.xda-developers.com/showthread.php?t=2173524
it's 4.2 and camera (3MP) works but I'm not sure about bluetooth although I doubt it cuz I haven't even found a 4.1 rom that it works with I actually prefer Provision http://forum.xda-developers.com/showthread.php?t=2098618 though or even Pacman 19.3... be sure whatever rom you use to flash the boot.img that it says to flash and if you need a kernel that is a zip file flash that too (it will have the modules for wifi)

lilrob1213 said:
http://forum.xda-developers.com/showthread.php?t=2173524
it's 4.2 and camera (3MP) works but I'm not sure about bluetooth although I doubt it cuz I haven't even found a 4.1 rom that it works with I actually prefer Provision http://forum.xda-developers.com/showthread.php?t=2098618 though or even Pacman 19.3... be sure whatever rom you use to flash the boot.img that it says to flash and if you need a kernel that is a zip file flash that too (it will have the modules for wifi)
Click to expand...
Click to collapse
I thought all CDMA development was in the CDMA development forum, I didn't know PrimoC builds were in the "Original Android Development" that makes things a little more confusing.

superdug said:
I thought all CDMA development was in the CDMA development forum, I didn't know PrimoC builds were in the "Original Android Development" that makes things a little more confusing.
Click to expand...
Click to collapse
Sorry 'bout that. Bluetooth works to an extent. Audio from calls isn't being routed correctly so you don't hear anything through a Bluetooth headset when someone calls you and visa versa.
Sent from my One V using Tapatalk 2

superdug said:
... It would be nice if someone could mention this to inyourface to let him know, since you know, I can't.
Click to expand...
Click to collapse
superdug said:
http://forum.xda-developers.com/showthread.php?t=1948034&page=35
I can't post to the thread because I haven't posted enough on XDA to post in developer threads yet apparently. Needless to say the latest PAC MAN release, wifi is broken.
There is one person who asks "Why is wifi still broken?" but it seems to have been glanced over. I have fully wiped and installed, and Wifi is in a permanent state of starting, scanning, turning off, turning back on, scanning, turning off, turning back on, scanning, ... in an infinite loop. It did this when I upgraded from 20.0, and did it after I did a full wipe as well.
I'm trying to find a 4.2.x rom that has preferably all the hardware working (wifi, camera, and bluetooth being the most important short of the phone functionality) that doesn't suffer from the random lockscreen reboot. If someone has a suggestion on which PrimoC Rom fits that bill please let me know.
I apologize for not posting this in the appropriate place, but I'm not allowed to post it in an the appropriate place until I post more.
Click to expand...
Click to collapse
He knows, it's not working on either version of the ROM. PrimoU or PrimoC. He's working on other things too, just be patient guys! Try v19.3 in the meantime. It's fully stable, and my daily driver. I love it!
---------- Post added at 01:14 PM ---------- Previous post was at 01:10 PM ----------
lilrob1213 said:
http://forum.xda-developers.com/showthread.php?t=2173524
it's 4.2 and camera (3MP) works but I'm not sure about bluetooth although I doubt it cuz I haven't even found a 4.1 rom that it works with I actually prefer Provision http://forum.xda-developers.com/showthread.php?t=2098618 though or even Pacman 19.3... be sure whatever rom you use to flash the boot.img that it says to flash and if you need a kernel that is a zip file flash that too (it will have the modules for wifi)
Click to expand...
Click to collapse
Bluetooth works in 19.3. As for the kernel, it's the 'boot.img' thats in the zip file. It's usually in the .zip with the ROM

Same Problem...
I have the same problem... But I come from Cyanogen 10.1 and it was working fine. The thing is that it does conect to some free wifi connections like mcdonald's one but not to my home wifi... I will try to install back CM 10.1 and see what happens.
---------- Post added at 12:44 PM ---------- Previous post was at 11:54 AM ----------
Ok everything is ok with CM 10.1 restored... I'm going to try installing Pac rom without doing a format system before and see what happens...
PS: I'm on sony xperia SP c5303 if some cares...
---------- Post added at 12:58 PM ---------- Previous post was at 12:44 PM ----------
" I'm going to try installing Pac rom without doing a format system before and see what happens..."
This didn't work... Wifi isn't working so I think i'm just going to ask some PACrom staff some help...:crying:
If someone have a solution...

robbyus1111 said:
I have the same problem... But I come from Cyanogen 10.1 and it was working fine. The thing is that it does conect to some free wifi connections like mcdonald's one but not to my home wifi... I will try to install back CM 10.1 and see what happens.
---------- Post added at 12:44 PM ---------- Previous post was at 11:54 AM ----------
Ok everything is ok with CM 10.1 restored... I'm going to try installing Pac rom without doing a format system before and see what happens...
PS: I'm on sony xperia SP c5303 if some cares...
---------- Post added at 12:58 PM ---------- Previous post was at 12:44 PM ----------
" I'm going to try installing Pac rom without doing a format system before and see what happens..."
This didn't work... Wifi isn't working so I think i'm just going to ask some PACrom staff some help...:crying:
If someone have a solution...
Click to expand...
Click to collapse
Ooookkkaayyy.....
1. Please try to avoid reviving dead threads unless you truly have a reason
2. Please post problems in THAT devices forum as I imagine very few HTC One V users are aware of Sony Xperia SP development
3. Sometimes ROMs have bugs. Accept that.

Gloups! Sorry!
I thought I was in the xperia sp forum when I wrote that...
Sorry :-[
Sent from my C5303 using XDA Premium 4 mobile app

[Q] FreeGS3 - System Update

I have the following rom:
Team Sonic-FreeGS3 JB v3.0.0
Located Here
http://forum.xda-developers.com/showthread.php?t=1748818&highlight=freegs3
I have the following custom recovery loaded:
TWRP
The rom started to prompt me today to apply a system update. Is this safe to do since I have a custom recovery? I don't care/want the update to work, obviously, I just want it to quit annoying me
Thank you in advance for your time!

champs777 said:
I have the following rom:
Team Sonic-FreeGS3 JB v3.0.0
Located Here
http://forum.xda-developers.com/showthread.php?t=1748818&highlight=freegs3
I have the following custom recovery loaded:
TWRP
The rom started to prompt me today to apply a system update. Is this safe to do since I have a custom recovery? I don't care/want the update to work, obviously, I just want it to quit annoying me
Thank you in advance for your time!
Click to expand...
Click to collapse
Let it install and fail. Reboot and no more notification
Sent from my SPH-L710 using xda premium

The notification will come back. Naddict has a zip that changes your buikd prop so you won't have the notification anymore.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 04:58 PM ---------- Previous post was at 04:52 PM ----------
Here's the zip
http://forum.xda-developers.com/showthread.php?p=38564462
Sent from my SPH-L710 using Tapatalk 2

daniel4653 said:
The notification will come back. Naddict has a zip that changes your buikd prop so you won't have the notification anymore.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 04:58 PM ---------- Previous post was at 04:52 PM ----------
Here's the zip
http://forum.xda-developers.com/showthread.php?p=38564462
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
that didnt help me one bit. first thing that popped up after a reboot was a notice to install update. any other suggestions?

How did that not help ? That has worked on goodness/freezas/ and MOAR ROM. Did you wipe and fix permissions ?
Sent from my SPH-L710 using Tapatalk 2

daniel4653 said:
The notification will come back. Naddict has a zip that changes your buikd prop so you won't have the notification anymore.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 04:58 PM ---------- Previous post was at 04:52 PM ----------
Here's the zip
http://forum.xda-developers.com/showthread.php?p=38564462
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Thank you daniel4653. I will try it now and report back my results. I appreciate your time.

daniel4653 said:
The notification will come back. Naddict has a zip that changes your buikd prop so you won't have the notification anymore.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 04:58 PM ---------- Previous post was at 04:52 PM ----------
Here's the zip
http://forum.xda-developers.com/showthread.php?p=38564462
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Just to confirm daniel4653.
---
Here is a build prop flashable... Let me know how it goes... Ma6 entries changed to mb1...clear caches and fix permissions....
http://db.tt/e34tGlmV
----
1) Install Zip
2) Clear Cache
3) Fix Permissions
4) Reboot
5) Issue fixed
Is this the correct order?
Thanks.

champs777 said:
Just to confirm daniel4653.
---
Here is a build prop flashable... Let me know how it goes... Ma6 entries changed to mb1...clear caches and fix permissions....
http://db.tt/e34tGlmV
----
1) Install Zip
2) Clear Cache
3) Fix Permissions
4) Reboot
5) Issue fixed
Is this the correct order?
Thanks.
Click to expand...
Click to collapse
Sorry I forgot to reply to this thread. Yes that's the steps you should take.
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png

daniel4653 said:
Sorry I forgot to reply to this thread. Yes that's the steps you should take.
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png
Click to expand...
Click to collapse
Sweet! I think I am good to go. I followed the steps and when I booted the phone backup I still had the System Update. I click Install Now on the system update. It thought for a second and then came back and said your phone is up to date. I reboot the phone and now I no longer have the update request.
Thank you again Daniel!

Why is it every time there is an OTA suddenly there are 50 threads and another 100 posts on "what do I do?"
Rule 1 says please search before posting. Using google and adding xda into the search parameters will usually get you at least 1 of the way too many threads and posts on this.
Thanks
Friendly Neighborhood Moderator

kennyglass123 said:
Why is it every time there is an OTA suddenly there are 50 threads and another 100 posts on "what do I do?"
Rule 1 says please search before posting. Using google and adding xda into the search parameters will usually get you at least 1 of the way too many threads and posts on this.
Thanks
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
Also, when you create a thread (on the PC, that is), XDA automatically does the search for you and gives you suggestions of similar threads to read before posting. I've found a lot of my answers just by trying to create a post and finding the exact thing I was looking for.

kennyglass123 said:
Why is it every time there is an OTA suddenly there are 50 threads and another 100 posts on "what do I do?"
Rule 1 says please search before posting. Using google and adding xda into the search parameters will usually get you at least 1 of the way too many threads and posts on this.
Thanks
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
topherk said:
Also, when you create a thread (on the PC, that is), XDA automatically does the search for you and gives you suggestions of similar threads to read before posting. I've found a lot of my answers just by trying to create a post and finding the exact thing I was looking for.
Click to expand...
Click to collapse
In response to the 2 above comments...
Initially I started with the ROM Development Page
http://forum.xda-developers.com/showthread.php?t=1748818&highlight=freegs3
I used the "search this thread" to try and find what I was looking for. Towards the end, other people had the same issue and some recommended to just find another rom.
When I couldn't find anything useful on the developer thread I started just to search the development and Q&A sections. I was having a hard time locating anything because I wasn't sure if the suggestions I found would fix all/most roms or were they specific to just a particular rom. Again back to square 1.
I then decided that I would post a question on the developer thread for my rom. I figured this would be the best place since others were probably having the same issue. When I tried to do that, I very quickly realized that I haven't posted enough thread topics to post something in the development section. I decided my next best best would be to post something in the Q&A section. I was hoping the answer would help me and others that are having the same issue.
So just to recap......No......I didn't just come straight to the Q&A section and post a question without looking. Quit assuming the worst in people.

[Q] beanstalk 4.3 installation order

I was going to try beanstalk 4.3 and am unsure about the order to do the installation. Do I flash the hercules recovery zip, back up ROM, wipe phone, flash rom , flash gapps, in that order?

Did you read the OP in the Beanstalk thread?? Might help.
Sent from my cellular telephone

kj2112 said:
Did you read the OP in the Beanstalk thread?? Might help.
Sent from my cellular telephone
Click to expand...
Click to collapse
Yes I did and it say to do it in that order. I thought that seemed odd, so I would ask.

sloerthinmost said:
Yes I did and it say to do it in that order. I thought that seemed odd, so I would ask.
Click to expand...
Click to collapse
Always best to do what the OP says....in most cases....rather than have people who may not even know what they are doing tell you different.
Sent from my cellular telephone
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
Just make sure you understand what you're reading before you do anything...or things can go bad.
Sent from my cellular telephone

[Q] setup wizard has stopped.blame tylor

after rom installation,boot animation was normal but on welcome screen i'm facing forced stoppage of setup wizard
[OFFICIAL] [Nightlies] [Maguro] PAC-Man 4.3
what to do ..???

Do what it says and blame Tyler. lol
What gapps are you using?

gapps 4.3
there is a link given for gapps also along with rom file

Sheraz gehlan said:
there is a link given for gapps also along with rom file
Click to expand...
Click to collapse
Well I havent used that ROM and dont know what Gapps they supply you with. But maybe try these, if the ones you have are different:
http://goo.im/gapps
Download the 4.3 ones right at the top and wipe data, cache and dalvik and flash everything again.

used the same
jsgraphicart said:
Well I havent used that ROM and dont know what Gapps they supply you with. But maybe try these, if the ones you have are different:
Download the 4.3 ones right at the top and wipe data, cache and dalvik and flash everything again.[/QUOT
what else i can do ..??
Click to expand...
Click to collapse

Sheraz gehlan said:
what else i can do ..??
Click to expand...
Click to collapse
So it didnt work? Same thing happened? Something obviously isnt working right then. Have you tried any other ROMs? Maybe its an issue with the ROM. Again, I havent used that ROM so I dont know.
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
Also, are you using the right ROM for your phone. There are 3 different types. Verizon, Sprint and Unlocked GSM versions. I see you used Maguro. So I assume you arent on Sprint or Verizon.

its GSM samsung galaxy nexus ...i tried the right one
now i'm using paranoid 3+
But facing many bugs :/

Sheraz gehlan said:
its GSM samsung galaxy nexus ...i tried the right one
now i'm using paranoid 3+
But facing many bugs :/
Click to expand...
Click to collapse
If you are using all the right stuff, then you should have no issues as long as you are wiping everything before flashing. You say you are so I don't know what is causing your problem.
By the way. I just looked at your screenshot again. I would suggest plugging your phone in while doing all this. You dont want your phone to die in the middle of wiping/flashing. That will cause problems.
---------- Post added at 03:02 PM ---------- Previous post was at 02:05 PM ----------
Just had a thought. If you are not using the latest recovery, it could maybe be causing issues. Whether its TWRP or CWM, make sure you are using the latest.

Boot 2 roms...

I have read that it is possible to boot 2 roms at once? have searched around but the only thing i see if for the i9300 i believe and just curious if i can get it to work on my i747m so i can try another rom without having to get rid of mine and re-flash.... :S
Currently running Dirty Unicorns 8.1 and wanting to try slimkat and just figure it would be neat to be able to boot into either one without having to flash every time....
Any help would be appreciated!

I haven't tried it yet, but here's the thread: http://forum.xda-developers.com/showthread.php?t=2684052

Im running it right now. Just search XDA for TWRP multiboot, it will be version 2.8.3.0 I believe and flash it in recovery
---------- Post added at 12:08 AM ---------- Previous post was at 12:02 AM ----------
jason2678 said:
I haven't tried it yet, but here's the thread: http://forum.xda-developers.com/showthread.php?t=2684052
Click to expand...
Click to collapse
wow, don't know how I missed this, its exactly what I was referring to