Develop Bugs

[Q] bricked my huawei ascend mate plzz HELP!!!

Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!

hamzafoad said:
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
Click to expand...
Click to collapse
details pls. soft brick, hard brick? does it start or just blackscreen, etc

wulfy1000 said:
details pls. soft brick, hard brick? does it start or just blackscreen, etc
Click to expand...
Click to collapse
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.

hamzafoad said:
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
Click to expand...
Click to collapse
that is softbricked.update app on card and start phone with vol up+vol down

wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse

hamzafoad said:
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse

wulfy1000 said:
hamzafoad said:
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse

hamzafoad said:
wulfy1000 said:
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
i really need help plz culd someone help me
Click to expand...
Click to collapse

hamzafoad said:
hamzafoad said:
i really need help plz wi someone help me
Click to expand...
Click to collapse
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse

surdu_petru said:
hamzafoad said:
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse

hamzafoad said:
surdu_petru said:
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse

surdu_petru said:
hamzafoad said:
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
so how did u fix it.
Click to expand...
Click to collapse

I would redownload the update.app. the zip could be corrupted. Also make sure when you unrar it use 7zip or winrar. Once i used the windows archiver and it wouldn't work.
Sent from my P6-U06 using xda app-developers app

Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise

markteunis said:
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
Click to expand...
Click to collapse
'' it goes into boot look during '' ? Please explain.

ZuperStyler said:
'' it goes into boot look during '' ? Please explain.
Click to expand...
Click to collapse
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.

markteunis said:
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
Click to expand...
Click to collapse
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.

bokchoi2020 said:
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
Click to expand...
Click to collapse
Thanks I tried both with no succes
If I go in huawei recovery by pressing Power + volume up +volume down and do a full wipe HAM will reboot itself automatically after 10 secs still get stuck in Boot screen Huawei Ascend after reboot.
I formatted the SD and put the Update.app in dload folder. HAM is not connected to PC. Still it comes no further then checking system before it switches itself off agian.
I am getting desperate Thanks for the help so far:highfive:

Still have problem, nothing seems to work!
Anybody else that might be able to help?

BTW. Anyone tested if multiloader works on soft bricked phones:
http://forum.xda-developers.com/showthread.php?t=2618253

[Q] please help me guys...I am screwed

I have an International version of ascend p6 -06 with B107.
I was trying to install kitkat into it.Its rooted.
I downloaded the UPDATE.APP from one of the forums.I installed twrp and I thought I can use to flash the new ROM using it,but I couldnt find the option,I read somewhere only the zip files can be installed through TWRP. Whenever I press the volume+ + volume- + power button,the phone starts with the TWRP directly than doing any update .I have put the UPDATE.APP file in dload folder in my SD card,still it was not updating with that given shortcut.
I did a stupid thing just now,I wiped all datas using TWRP and now i have no OS installed ,and like that my phone is bricked.now if i switch on the phone it gets stuck at huawei ascend Logo.and if i press volume up and down buttons along with power button,then it goes to TWRP ..
pls pls pls help me ,and thanks a ton in advance.
I even tried downloading the the original rom from the huawei website and still not able to update using that UPDATE.APP file...

don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..

can u help me with starting adb.
blueIBI said:
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
Click to expand...
Click to collapse
I am sorry to trouble..I am not a PRO in all these like u guys.
how do i start a ADB?? and where to download the stock recovery image?

i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?

nope
blueIBI said:
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
Click to expand...
Click to collapse
no. I used a huawei P6 toolkit.

OK...then there should be the Option to install/flash a stock recovery..

here comes the next problem
I downloaded the abd driver installer 1.0,it identifies my phone.but once i press the button for installing the error pops up.,incompatible with win 8 (64 bit.)now what to do??

yes but
blueIBI said:
OK...then there should be the Option to install/flash a stock recovery..
Click to expand...
Click to collapse
The option of installing stock recovery is there,but now when i can connecting the phone its not recognising.it shows phone not connected.

hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc

ok let me
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I will try to find it and will update you

Thank youuuuuuuuuuu
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I have no words to thank you..finally its done..the adb drivers were not installed well,thats why it was not picked up by the tool.I updated the stock recovery image and it rebooted and installed well...thanks a ton again..and I appreciate your fast replies.I had spend 2 days only in this.its such a releif.:victory::victory:

you are welcome

Again problem
blueIBI said:
you are welcome
Click to expand...
Click to collapse
I am sorry to trouble you again.yesterday i updater to B508 kitkat,but gprs or 3g were not working.so today I downloaded the B512 version.in this version if iam putting the dload file in SD card,it doesnt read it.I have to put this in internal storage itself.This time my phone is stuck in the normal android recovery stage as I dont have TWRP installed (I guess,the same shorcut is not starting TWRP).
And to update to the older version the update.app file should be there in internal storage which i cannot assess at this point since mobile doesnt start..what do I do??
I tried installing TWRP connecting mobile in the present status,but its not installing

hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..

again got lucky
blueIBI said:
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
Click to expand...
Click to collapse
It worked.I fomatted the sd card and left only dload folder .and used the same version which was originally working (508).now its reverted back to normal ..half my tensions are over.but the i wanna change from this rom,in this my internet doesnt work..I wanted to install B510,but for that I have to install B132 first,which i am trying.but its not working.Any idea what should be done.?

try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..

blueIBI said:
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
Click to expand...
Click to collapse
You meant I shoould make a recovery for B132 using huawei update extractor.I have the P6 tool with me,if i update a recovery image for jellybean (currently its kitkat) will that be enough??

yes will be enough..

bigger problem
blueIBI said:
yes will be enough..
Click to expand...
Click to collapse
I made B132.zip file and using TWRP i installed it.It showed the istallation was successful,and i rebooted to the system and its stuck in huawei ascend logo and its not moving from there.I tried again using the vol- + vol+ + powerbotton,Its restarting to the sa,me logo.somehow recovery is not working.I think now I am really screwed.

you should not make a ZIP file..
now you are at then beginning again..

Can't update to B512

Hey guys. I was on Kitkat Beta CN with TWRP. I wanted to update to B512 so I reverted to the original recovery B506CN recovery (downloaded it from here http://forum.xda-developers.com/showthread.php?t=2709353)
Once I pressed local update the phone reboots but I get the following error message:
Huawei SD card update fail.....
The update is /dload/update.app
Why do I get this error message and how to fix it in order to update to B512

try one of these http://forum.xda-developers.com/ascend-p6/help/p6-u06-common-issues-fixes-t2843810#post54736765 or http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511

Tried many different combinations and nothing helped seems this problem is binded to my SD card. I tried different recovery versions and tried to update when I had 3 different roms. It seems I can't update with the stock recovery no matter what I do. I tried doing that in the internal storage but still the same mistake? Why should it access the SD card for an update in the internal storage?

When I enter recovery manually (without going at update section in settings) I see at first screen this message and I have to restart to enter at the recovery
ro.build.version.release = 4.4.2
ro.product.name = VEDGE
Current build version release is not 4.2 - don't need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is unlock state
Do you also see it or is this a clue?

Igano said:
When I enter recovery manually (without going at update section in settings) I see at first screen this message and I have to restart to enter at the recovery
ro.build.version.release = 4.4.2
ro.product.name = VEDGE
Current build version release is not 4.2 - don't need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is unlock state
Do you also see it or is this a clue?
Click to expand...
Click to collapse
You should unplug your device from usb and then reboot to recovery because u can read there "USB Update Enter" that means your device is pluged to a pc

Igano said:
Tried many different combinations and nothing helped seems this problem is binded to my SD card. I tried different recovery versions and tried to update when I had 3 different roms. It seems I can't update with the stock recovery no matter what I do. I tried doing that in the internal storage but still the same mistake? Why should it access the SD card for an update in the internal storage?
Click to expand...
Click to collapse
Have you tried using the file to downgrade back to Jelly bean from KitKat?
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Download the file, and place the dload folder onto your sd card, and do a local update as usual. When that is done, your phone will reboot normally. Just replace the dload folder with the one from B512, and try updating again. If it still doesn't work, I'd suggest doing a forced update using the 3-button method (power button & volume keys).

dl this first http://www.androidfilehost.com/?fid=23252070760973625
extract it's file in your adb dir
You also could try this > run cmd on your pc >use
adb reboot bootloader
fastboot flash recovery "full name of the file extracted from the downloaded file inc it's extension"
fastboot reboot
then you could try flashing again

astrit1 said:
You should unplug your device from usb and then reboot to recovery because u can read there "USB Update Enter" that means your device is pluged to a pc
Click to expand...
Click to collapse
Yes I tried and it's still the same fails.
miz_pimp said:
Have you tried using the file to downgrade back to Jelly bean from KitKat?
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Download the file, and place the dload folder onto your sd card, and do a local update as usual. When that is done, your phone will reboot normally. Just replace the dload folder with the one from B512, and try updating again. If it still doesn't work, I'd suggest doing a forced update using the 3-button method (power button & volume keys).
Click to expand...
Click to collapse
Did with your file and just any other rom I could find in the forum, still the same error
digijedi007 said:
dl this first http://www.androidfilehost.com/?fid=23252070760973625
extract it's file in your adb dir
You also could try this > run cmd on your pc >use
adb reboot bootloader
fastboot flash recovery "full name of the file extracted from the downloaded file inc it's extension"
fastboot reboot
then you could try flashing again
Click to expand...
Click to collapse
I tried and this recovery causes a constant vibrating when in recovery mode, apart from that I still get the same errors.
My only fast and easy solution would be if someone uploaded a B512 repack for TWRP. That would be awesome, right now I just use the B513 repack. I don't think I can find the fix to this any more.

Need B512 recovery

Can anyone share B512 stock recovery please

maticex said:
Can anyone share B512 stock recovery please
Click to expand...
Click to collapse
You have modified build.prop file and thats why it keeps failing.. Download B132 firmware and put it to your sdcard/dload folder. What i say 3days/3 topics ago.

ADHDDHDA said:
You have modified build.prop file and thats why it keeps failing.. Download B132 firmware and put it to your sdcard/dload folder. What i say 3days/3 topics ago.
Click to expand...
Click to collapse
I don't know how but there isn't that message anymore, there is only sd card update fail everytime

try another sdcard..
Gesendet von meinem P6-U06

here's B512 recovery
Hi there,
Here's the recovery (inside the .7z file).

Hotfingers said:
Hi there,
Here's the recovery (inside the .7z file).
Click to expand...
Click to collapse
Thank you
Anyone know how to come in fastboot mode with only stock recovery installed and no rom installed, because there is no devices showing in adb

maticex said:
Thank you
Anyone know how to come in fastboot mode with only stock recovery installed and no rom installed, because there is no devices showing in adb
Click to expand...
Click to collapse
OK, if you want to try getting adb and fastboot to work. Try these links...
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/showthread.php?t=2646453
If you want to flash a stock rom. Then on your EXTERNAL SDCard
* Create a folder called "dload"
* put the "UPDATE.APP" from the stock rom into the dload folder.
* power off your phone.
* hold volume up and volume down at the same time (keep them both pressed in).
* now use your third hand to press the power button.
* When the phone starts up keep holding the volume up and volume down buttons until the stock recovery starts up...
(this all doesn't work if your phone is plugged into the usb cable at the time, so you need at least 25% battery to do this).
good luck

htc desire 820 stucks at installing marshmallow update

i got marshmallow update for my desire 820n and after download it when installing a red rectangle with ¡ in mid of it appear and the mobil restart without installing any thing.......i reset it to factory reseting and try again but the same problem again.......i have tried again and again but the same problem happens.........any help.....thankyou

mohamedeliraqi said:
i got marshmallow update for my desire 820n and after download it when installing a red rectangle with ¡ in mid of it appear and the mobil restart without installing any thing.......i reset it to factory reseting and try again but the same problem again.......i have tried again and again but the same problem happens.........any help.....thankyou
Click to expand...
Click to collapse
Now the phone is loaded into the system? and what firmware version 5.0.2?

vuk1963 said:
Now the phone is loaded into the system? and what firmware version 5.0.2?
Click to expand...
Click to collapse
yes the phone is loaded into the system and working properly.....the firmware version is 5.02 ......thank you

mohamedeliraqi said:
yes the phone is loaded into the system and working properly.....the firmware version is 5.02 ......thank you
Click to expand...
Click to collapse
Strictly follow these instructions!
A method for producing a flow 5.0.2 5.0.2 with subsequent update to 6 mm 100% process working. install stock rekaveri , If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.
For Qualcomm Snapdragon MSM8939 -- Snapdragon 615 Qualcomm 8-ядерный 64-бит процессор ядра Cortex A53 4x1.5 ГГц и 4х1 ГГц Adreno 405 HTC Desire 820n 1-sim. for Europe Firmware https://yadi.sk/d/KYcWwUH4raUxm stock rekaveri 5.0.2 https://yadi.sk/d/Jv1cy3EqrTuba For locked bootloader https://yadi.sk/d/C5ZYzOL-k4dco

thank you for your reply.......but i have to put both files in my external sd or what? Can you give me more instruction to follow .......thank you

No, you only have to put the 0PFJIMG.zip to your external SD. Then it will give you an alert called: "Do you want to start update" or something others, you have to press the volume up button and then it's updating. But make sure you have stock recovery and locked bootloader, otherwise it will not work.
Sent from my SM-G930F using XDA-Developers mobile app

xEmre66 said:
No, you only have to put the 0PFJIMG.zip to your external SD. Then it will give you an alert called: "Do you want to start update" or something others, you have to press the volume up button and then it's updating. But make sure you have stock recovery and locked bootloader, otherwise it will not work.
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Ok but what i will do with stock recovery or where i put it or how i install it??....i have root my device or what???
thank you

mohamedeliraqi said:
Ok but what i will do with stock recovery or where i put it or how i install it??....i have root my device or what???
thank you
Click to expand...
Click to collapse
рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons. 1 file-0PFJIMG.zip

ok i did it and that is what i get:
Main Version is older !
Update Fail
Device halted due to Large Image update fail
Press <POWER> to reboot.
any ideas????.....thank you

mohamedeliraqi said:
ok i did it and that is what i get:
Main Version is older !
Update Fail
Device halted due to Large Image update fail
Press <POWER> to reboot.
any ideas????.....thank you
Click to expand...
Click to collapse
1.install stock rekaveri 2.If you have unlocked bootloader 3.рut it on your external sd card not decompress zip archives(0PFJIMG.zip)0PFJIMG.zip-Only so it is important !!! 4.boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons. PS You sure it's all done? You can do this: Format the SD memory card and place it on an SD memory card 1 file 0PFJIMG.zip

Place the 0PFJIMG.zip into the root of external sd not in a folder.
Sent from my SM-G930F using XDA-Developers mobile app

vuk1963 said:
1.install stock rekaveri 2.If you have unlocked bootloader 3.рut it on your external sd card not decompress zip archives(0PFJIMG.zip)0PFJIMG.zip-Only so it is important !!! 4.boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons. PS You sure it's all done? You can do this: Format the SD memory card and place it on an SD memory card 1 file 0PFJIMG.zip
Click to expand...
Click to collapse
I did exactly what you say but i did not install stock recovery because my decice:
1) NOT rooted
2) locked bootloader
3) S on
HOW can i install stock recovery without rooting???
thank you

xEmre66 said:
Place the 0PFJIMG.zip into the root of external sd not in a folder.
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
I did that but i did not install stock recovery because my device is not rooted......any ideas without rooting

Stock recovery can be installed without root i think. Try it
Sent from my SM-G930F using XDA-Developers mobile app
---------- Post added at 08:05 PM ---------- Previous post was at 07:58 PM ----------
I read your post above. You don't need to install stock recovery because your device has already stock recovery due to locked bootloader and S-ON. Just put the file in root of ext sd and boot to hboot. It will ask to update. So press volume up to update. If it doesn't work after all the posts in xda, then you can contact HTC to fix that problem. Maybe they can find a fix for it or it is an known bug.
Regards,
xEmre66
Sent from my SM-G930F using XDA-Developers mobile app