Develop Bugs

Question about desire after S-off revol.

Hello XDA'ers!,
[Already used search function btw].
There are a few things a need some answer for.
Some info:
After having the official gingerbread update from HTC I used Revolutionary
TO s-off and root (with some zip file) my phone. Now my phone has Cynanogenmod 7. If im correct the recovery i have is: Revolutionary CWM v4.0.1.4.
Now here are the questions:
1: I want to install MIUI, what do i have to do in recovery before installing this rom. Do I have to do something like clear cache or wipe data or something? + Where can i find the official MIUI roms? THere are different websites.
2: I have the Revolutionary Recovery and Rom Manager says i have to flash clockworkmod recovery before i can search for roms etc. Is it worth it to install it over the revo recov?

1) Before flashing ANY new rom it's always best to do a nandroid backup in case something goes wrong (you can restore to how it was when you made your backup).
Before you flash the rom you've chosen you should do the three wipes... In recovery "wipe data/factory reset", "wipe cache partition", "advanced/wipe dalvik cache".
Install your new rom... "install zip from sd card", "choose zip from sd card".
2) The (seemingly) most popular miui rom here is this one http://forum.xda-developers.com/showthread.php?t=957291.
Download the version you require and place onto your sd card. Then go to step 1 above.
3) Most people would recommend not using rom manager, but the choice is yours. Flashing the newest cwm recovery will make no difference really to when you wanna flash a rom.

Hey Zedmarcus,
thank you so much for your response!
Really helped a lot.

No problem. Helping and sharing is what it's about
If it helps, hit the thanks

Big problem with Cyanogen 7.1 and 7.2

Every morning, I must go to the Parameters menu and choose my provider's network because Android "forget" it during the night. If I don't do that, I can't use my 3G connection, but I can make and receive calls.
This bug is on the 7.1 and 7.2 ROMs
Please help !

Did you tried reading the rom thread?
I'm using 7.2 and it's all fine here.

Yes.
It happen even with the 7.1, a stable ROM.
And this problem doesn't appear with others ROMs

Advice
--------------------------------------
0. make a Backup & Safe your Data
1. Boot to Recovery Mode
2. Wipe Data and Cache / Factory Reset
3. Wipe Dalvik Cache
4. Install Zip --> CM-full Pack
5. Wipe Data and Cache / Factory Reset
6. Wipe Dalvik Cache
7. Install Zip --> CM-Update 7.1/7.2
8. Reboot and Wait
________________________________________
if it still doesn't work check your cm-full.zip & cm-update.zip with MD5-SUM, if it's all really correct
MD5-Sum --> http://en.wikipedia.org/wiki/Md5sum
____
if it was useful, then don't forget to thank ;-)

Thanks. Where can I have the CM full Pack ? I found only update-cm-7.1.0-DesireHD-signed.zip and older versions.

Durandil said:
Thanks. Where can I have the CM full Pack ? I found only update-cm-7.1.0-DesireHD-signed.zip and older versions.
Click to expand...
Click to collapse
You Can find everything you want at www.cyanogenmod.com and btw when u download the whole rom in cm its called update so its the whole rom in this update

I would recommend these Packages
cm_ace_full-260.zip --> http://get.cm/get/21B
update-cm-7.2.0-RC1-ace-signed.zip --> http://get.cm/get/2db
I found all links under ' http://download.cyanogenmod.com/?device=ace&type= ' as ghalyoum already mentioned
Sry for my lately reply
__________________________
if it was useful, then don't forget to thank ;-)

The One Carrying the number 260 its the latest nightly friend while the other is The release candidate. i suggest you go with the RC cz nightlies are experimental and may have problems.Hope That I Helped You Bro

Ok it works.
Instead of doing "full wipe", I did "format all partitions (except sdcard)"
After that, I have installed the ROM 7.1 and it works.

Odd problem installing latest CM11 Builds (install wizard FCs)

I've been trying to install the latest CM11 builds, both the April 27th NIGHTLY and the May 3rd RC5, downloaded from the androidarmv6.org site.
Been using CWM 6.4.0.7.
Steps taken: Reset to factory (wipe /data and /cache). Flashed the image. Rebooted to phone.
It reboots okay and it allows me to make an Emergency Call, but, the Android Setup wizzard stops when I select the right language (the right language comes detected/preselected, actually) and hit the 'Next' button (the kind of 'Play' arrow). It just force closes on me.
I tried reverting to the CM March 17th build which worked fine before and it does the exact same thing on me, too... while it did work before...!
What am I missing?? Hope some can help!
Thx!!!

Jigsjdg said:
I've been trying to install the latest CM11 builds, both the April 27th NIGHTLY and the May 3rd RC5, downloaded from the androidarmv6.org site.
Been using CWM 6.4.0.7.
Steps taken: Reset to factory (wipe /data and /cache). Flashed the image. Rebooted to phone.
It reboots okay and it allows me to make an Emergency Call, but, the Android Setup wizzard stops when I select the right language (the right language comes detected/preselected, actually) and hit the 'Next' button (the kind of 'Play' arrow). It just force closes on me.
I tried reverting to the CM March 17th build which worked fine before and it does the exact same thing on me, too... while it did work before...!
What am I missing?? Hope some can help!
Thx!!!
Click to expand...
Click to collapse
Flash PhilZ Recovery, Go To Wipe Menu In PhilZ Recovery and Select "Clean to install a new ROM", Now Flash ZIP and then only wipe data, if it does not work, delete setupwizard.apk from /system/app inside the zip and flash again

waqaswasil said:
Flash PhilZ Recovery, Go To Wipe Menu In PhilZ Recovery and Select "Clean to install a new ROM", Now Flash ZIP and then only wipe data, if it does not work, delete setupwizard.apk from /system/app inside the zip and flash again
Click to expand...
Click to collapse
Thanks for your quick answer!
Going over the installation instructions for PhilZ and consecutively a new ROM, I found I had missed one step: format /system before flashing a new ROM...
With my "old" CWM 6.4.0.7 still on, I managed to install the RC5 build from androidv6arm.org... And it seems to work just fine.

Jigsjdg said:
Thanks for your quick answer!
Going over the installation instructions for PhilZ and consecutively a new ROM, I found I had missed one step: format /system before flashing a new ROM...
With my "old" CWM 6.4.0.7 still on, I managed to install the RC5 build from androidv6arm.org... And it seems to work just fine.
Click to expand...
Click to collapse
that's what "clean to install a new ROM" does i.e format /system, /data, /cache etc BTW IT IS CWM 6.0.4.7 aand you are typing 6.4.0.7, if I am wrong then please give me the link.

waqaswasil said:
that's what "clean to install a new ROM" does i.e format /system, /data, /cache etc BTW IT IS CWM 6.0.4.7 aand you are typing 6.4.0.7, if I am wrong then please give me the link.
Click to expand...
Click to collapse
LOL, me and numbers... could just as well have typed 6.0.7.4 and still meant 6.0.4.7. I got not the latest (PhilZ' ends with an 8, mine with a 7, so, likely 6.0.4.7 ;p )
I did check out PhilZ but as I had nothing I couldn't open a terminal window to install it per the instructions that come with it...

[Q] How To Flash CM10 In HTC Wildfire S

I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.

Khizar hayyat said:
I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.
Click to expand...
Click to collapse
Try THIS.

testmasterbd said:
Try THIS.
Click to expand...
Click to collapse
Thanks For Your Valuable Reply Brother,
But Is There Any More Simpler Then This?????

Khizar hayyat said:
Thanks For Your Valuable Reply Brother,
But Is There Any More Simpler Then This?????
Click to expand...
Click to collapse
I don't think so. Just read full thread several times with patience then you'll be understood.

testmasterbd said:
I don't think so. Just read full thread several times with patience then you'll be understood.
Click to expand...
Click to collapse
But This Method Is Only For A510e & A510c But I Have A510b?

Khizar hayyat said:
But This Method Is Only For A510e & A510c But I Have A510b?
Click to expand...
Click to collapse
Via CWM recovery all ROM flashing way is almost same, no matter which model you have. But the matter is which version (ROM/kernel) support your device. Before flashing new ROM you need to confirm few things:
1. Bootloader status
2. S-NO/OFF
3. Root status
4. Supported Custom Recovery
5. Is that ROM/kernel support your device?
Click to expand...
Click to collapse
If these issues are met then you can go further. Now download your desired ROM and GApps in your SD card (root-directory of your eg. /storage/sdcard/0/) and follow the thread (your desired ROM) instruction (if there are) or follow these:
Code:
Boot into your Custom Recovery
wipe data/factory reset & cache partition
wipe battery stats (if this option available in your custom recovery)
wipe dalvik cache
format everything except sdcard
Flash the files via "install zip from sdcard" > "choose zip from sdcard"
wipe cache partition (remember your gapps install location. If, the location is cache partition then leave it)
wipe dalvik cache
reboot system
Remember you need good battery health before going recovery mode. Hope this will help you.

testmasterbd said:
Via CWM recovery all ROM flashing way is almost same, no matter which model you have. But the matter is which version (ROM/kernel) support your device. Before flashing new ROM you need to confirm few things:
If these issues are met then you can go further. Now download your desired ROM and GApps in your SD card (root-directory of your eg. /storage/sdcard/0/) and follow the thread (your desired ROM) instruction (if there are) or follow these:
Code:
Boot into your Custom Recovery
wipe data/factory reset & cache partition
wipe battery stats (if this option available in your custom recovery)
wipe dalvik cache
format everything except sdcard
Flash the files via "install zip from sdcard" > "choose zip from sdcard"
wipe cache partition (remember your gapps install location. If, the location is cache partition then leave it)
wipe dalvik cache
reboot system
Remember you need good battery health before going recovery mode. Hope this will help you.
Click to expand...
Click to collapse
This Looks Easier So Brother My Bootloader Is Unlocked And Device Is Rooted Dont Know About S-on And Off If Will Give Me A Recovery And Custom Rom So I am Very Thankful To U.
Sorry For Bad English

Khizar hayyat said:
Dont Know About S-on And Off
Click to expand...
Click to collapse
Check this
---------- Post added 1st August 2014 at 12:25 AM ---------- Previous post was 31st July 2014 at 11:55 PM ----------
If Will Give Me A Recovery And Custom Rom So I am Very Thankful To U.
Click to expand...
Click to collapse
Recovery and for Custom ROM - better, you decide first.

my first post by the way
Khizar hayyat said:
I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2481155 this rom
its the best rom i installed on htc wildfire s, its fast to, gapps included, everything works
copy it into sd card
then if u havent installed cwm
download rom manager
then open it
and click recovery setup
then install or update recovery
then pick ur device
then flash cwm recovery(2nd option)
and wait for download
after that in same app
choose reboot into recovery
then when phone reboots into recovery
pick install from sd card
i think u know the rest
i hope i was enough detailed

[Q] how to install another rom with kernel?

hi
thanks to this forum i installed CM11 on my phone and it's all good, but i heard recommendations about CM9 with hurtsky's kernel and i want to install it now.
i already downloaded the CM9 rom, gapps and kernel. my phone now has CM11 (installed with CWM).
i need step by step instructions how to change to the CM9+kernel i downloaded... hope you help me guys thanks alot :laugh:

open recovery mode
wipe data
wipe cache
format system
install rom
install gapp if needed
to install kernel also same way..
enjoy...

purnama_durja said:
open recovery mode
wipe data
wipe cache
format system
install rom
install gapp if needed
to install kernel also same way..
enjoy...
Click to expand...
Click to collapse
format system = mounts and storage----> format /system ?
and when i want to install kernel, if i wipe and format again, the rom will not be deleted?

lightmess5 said:
hi
thanks to this forum i installed CM11 on my phone and it's all good, but i heard recommendations about CM9 with hurtsky's kernel and i want to install it now.
i already downloaded the CM9 rom, gapps and kernel. my phone now has CM11 (installed with CWM).
i need step by step instructions how to change to the CM9+kernel i downloaded... hope you help me guys thanks alot :laugh:
Click to expand...
Click to collapse
Do a clean installation:
I assumed that you already saved cm9 rom and cm9 gapps in your external sd-card so, boot into recovery mode then,
select "wipe data / factory reset"
go to "mounts & storage" and format /system.
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
install cm9 rom
install cm9 gapps
reboot your phone