[Q] How To Flash CM10 In HTC Wildfire S - HTC Wildfire S

I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.

Khizar hayyat said:
I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.
Click to expand...
Click to collapse
Try THIS.

testmasterbd said:
Try THIS.
Click to expand...
Click to collapse
Thanks For Your Valuable Reply Brother,
But Is There Any More Simpler Then This?????

Khizar hayyat said:
Thanks For Your Valuable Reply Brother,
But Is There Any More Simpler Then This?????
Click to expand...
Click to collapse
I don't think so. Just read full thread several times with patience then you'll be understood.

testmasterbd said:
I don't think so. Just read full thread several times with patience then you'll be understood.
Click to expand...
Click to collapse
But This Method Is Only For A510e & A510c But I Have A510b?

Khizar hayyat said:
But This Method Is Only For A510e & A510c But I Have A510b?
Click to expand...
Click to collapse
Via CWM recovery all ROM flashing way is almost same, no matter which model you have. But the matter is which version (ROM/kernel) support your device. Before flashing new ROM you need to confirm few things:
1. Bootloader status
2. S-NO/OFF
3. Root status
4. Supported Custom Recovery
5. Is that ROM/kernel support your device?
Click to expand...
Click to collapse
If these issues are met then you can go further. Now download your desired ROM and GApps in your SD card (root-directory of your eg. /storage/sdcard/0/) and follow the thread (your desired ROM) instruction (if there are) or follow these:
Code:
Boot into your Custom Recovery
wipe data/factory reset & cache partition
wipe battery stats (if this option available in your custom recovery)
wipe dalvik cache
format everything except sdcard
Flash the files via "install zip from sdcard" > "choose zip from sdcard"
wipe cache partition (remember your gapps install location. If, the location is cache partition then leave it)
wipe dalvik cache
reboot system
Remember you need good battery health before going recovery mode. Hope this will help you.

testmasterbd said:
Via CWM recovery all ROM flashing way is almost same, no matter which model you have. But the matter is which version (ROM/kernel) support your device. Before flashing new ROM you need to confirm few things:
If these issues are met then you can go further. Now download your desired ROM and GApps in your SD card (root-directory of your eg. /storage/sdcard/0/) and follow the thread (your desired ROM) instruction (if there are) or follow these:
Code:
Boot into your Custom Recovery
wipe data/factory reset & cache partition
wipe battery stats (if this option available in your custom recovery)
wipe dalvik cache
format everything except sdcard
Flash the files via "install zip from sdcard" > "choose zip from sdcard"
wipe cache partition (remember your gapps install location. If, the location is cache partition then leave it)
wipe dalvik cache
reboot system
Remember you need good battery health before going recovery mode. Hope this will help you.
Click to expand...
Click to collapse
This Looks Easier So Brother My Bootloader Is Unlocked And Device Is Rooted Dont Know About S-on And Off If Will Give Me A Recovery And Custom Rom So I am Very Thankful To U.
Sorry For Bad English

Khizar hayyat said:
Dont Know About S-on And Off
Click to expand...
Click to collapse
Check this
---------- Post added 1st August 2014 at 12:25 AM ---------- Previous post was 31st July 2014 at 11:55 PM ----------
If Will Give Me A Recovery And Custom Rom So I am Very Thankful To U.
Click to expand...
Click to collapse
Recovery and for Custom ROM - better, you decide first.

my first post by the way
Khizar hayyat said:
I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2481155 this rom
its the best rom i installed on htc wildfire s, its fast to, gapps included, everything works
copy it into sd card
then if u havent installed cwm
download rom manager
then open it
and click recovery setup
then install or update recovery
then pick ur device
then flash cwm recovery(2nd option)
and wait for download
after that in same app
choose reboot into recovery
then when phone reboots into recovery
pick install from sd card
i think u know the rest
i hope i was enough detailed

Related

[Q] How to update your ROM.

Hello guys, I would like to know how to update my ROM using dalvik cache? I have Foxhound ROM 0.3 and i would like to install the 0.4. Can anyone help me ?
Hi Mate
You don't update using the Dalvik Cache. The Dalvik Cache is just something that is best to clear before an update.
In order to flash a new ROM there are a few things you need to have set up on your computer and phone and they are well detailed here:
http://forum.xda-developers.com/showthread.php?t=1392310
Read the above thread and find out what has already been done. I think your phone will be Bootloader Unlocked and Rooted already. If so flash the latest Clockwork Recovery Mod CWM and then just download the ROM you want and store it on your phone. Once done you will be able to use the above link to easily write it to your phone using CRM and the Flash Update from SD Card Option.
Hope this helps.
jamesmcuk said:
Hi Mate
You don't update using the Dalvik Cache. The Dalvik Cache is just something that is best to clear before an update.
In order to flash a new ROM there are a few things you need to have set up on your computer and phone and they are well detailed here:
http://forum.xda-developers.com/showthread.php?t=1392310
Read the above thread and find out what has already been done. I think your phone will be Bootloader Unlocked and Rooted already. If so flash the latest Clockwork Recovery Mod CWM and then just download the ROM you want and store it on your phone. Once done you will be able to use the above link to easily write it to your phone using CRM and the Flash Update from SD Card Option.
Hope this helps.
Click to expand...
Click to collapse
Ummm. he doesn't have to read that thread..
Just simply download the ROM
Put it on your phone's storage
Boot into CWR
Wipe Dalvik and Cache
Flash ROM
[OPTIONAL] Flash Kernel (if you used one a custom kernel)
zephiK said:
Ummm. he doesn't have to read that thread..
Just simply download the ROM
Put it on your phone's storage
Boot into CWR
Wipe Dalvik and Cache
Flash ROM
[OPTIONAL] Flash Kernel (if you used one a custom kernel)
Click to expand...
Click to collapse
If you flash another rom, will your apps be wiped as well? And if you flash an update from the same rom? Just back-up with Titanium or? Thanks.
danielvc said:
If you flash another rom, will your apps be wiped as well? And if you flash an update from the same rom? Just back-up with Titanium or? Thanks.
Click to expand...
Click to collapse
Apps are never wiped unless you wipe data/factory. Yes use titanium
Sent from my Galaxy Nexus using xda premium

Can somebody please help me!!!!

i flashed to cyanogenmod 7 nightlies, and then i installed from the sd the google apps (because the rom didn't come with market) through clockwork mod recovery and when i restart the phone, there is a blackscreen after the htc!!! It doesnt load up the cyanogen mod!! I've been waiting for over an hour!!!
I don't know what to do to fix it!!!
Can somebody please help me. I appreciate it very very much!!!
hey bro... dont flash two zips in one go... just flash cm7.2 again.. then reboot into recovery and then format dalvic cache, format factory and etc.. and then rebot again into recovery and then flash gapps
striker280 said:
i flashed to cyanogenmod 7 nightlies, and then i installed from the sd the google apps (because the rom didn't come with market) through clockwork mod recovery and when i restart the phone, there is a blackscreen after the htc!!! It doesnt load up the cyanogen mod!! I've been waiting for over an hour!!!
I don't know what to do to fix it!!!
Can somebody please help me. I appreciate it very very much!!!
Click to expand...
Click to collapse
as mhrsolanki2020 said ... When flashing rom, always boot it, and after reboot flash any changes that you want, like data/link2sd,gapps,gps fixes and so on ...
never flash few things in one step.
also clean cache and dalvik every time you flash new rom ..
I don't think he wiped data or cache.
You can flash cm7 and gapps at the same time with no issues.
I prefer doing it like this rather than multiple restarts and then I setup my accounts on first boot its never given me any problems.
Try again make sure in clockwork mod recovery you:
wipe data/factory reset
Wipe cache partition
Then goto advance and wipe dalvik
Then flash cm7
Then flash gapps
Restart and all should be fine.
Good luck.
so are those the steps i need?
and can u give me a link of the gapps i am supposed to use please?
striker280 said:
and can u give me a link of the gapps i am supposed to use please?
Click to expand...
Click to collapse
here you go mate ht tp://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
can you give me the steps i need to fix the black screen please?
Boot into recovery clockwork mod and do what I said above and you'll be fine.
so once i flash cyanogen i do not reboot first, but i directly flash the gapps as well?
Yes that's how I been doin it for many months
Make sure to wipe the data that I said in previous post or it wont boot.
Its an important step when flashing a rom.
Like the problems that previously occurred.
sorry for so many questions but,
is it either wipe data or factory reset or both?
"wipe data/factory reset
Wipe cache partition
Then goto advance and wipe dalvik
Then flash cm7
Then flash gapps"
'Data/factory reset' is the same thing
Then 'wipe cache partition'
Then in advance right at the bottom of clockwork mod 'wipe dalvik'
Once done click back then chose install zip from SD
Choose your rom file then confirm.
Then when finished click back.
Then install zip from SD select gapps file and confirm.
Once finished click reboot system.
Done.
will this work for sure? or will it give me the black screen again?
If you do everything I said in the same order it should definitely work my friend.
Is your mobile a GSM or cdma? Does it use a sim card?
Thank you so very much!!!!
No problem.
I'm guessing your up and running And hopefully very happy.
Good luck and all the best.
You're a life saver!!!

[Q] Problem jelly sandwich

Hi (and sorry for my bad english)
Today i got a problem with jellysandwich, i try to install this rom with my arc s with bootloader not allowed to be unlock. When i finish the installation in aroma i reboot and the screen stop at sony logo, someone have n idea about my problem ?
ClosureDX said:
someone have n idea about my problem ?
Click to expand...
Click to collapse
Reflash a stock ROM and try again. See the first link in my sig too before replying.
But which one stock ? And in "how to" install the rom.they say fix permission in cwm but i can't see this option
ClosureDX said:
But which one stock ? And in "how to" install the rom.they say fix permission in cwm but i can't see this option
Click to expand...
Click to collapse
stock rom for arc
stock rom for arc s
Here is tutorial on how to flash stock rom
root your phone after flashing stock rom (you should know how because you could flash custom rom before despite it failing
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
And there is a post to know how to root the arc s 4.0.4 or i need to downgrade first ?
here is a good thorough guide
For cwm i use SE extreme tweak installer is that good or there is a new version ?
ClosureDX said:
For cwm i use SE extreme tweak installer is that good or there is a new version ?
Click to expand...
Click to collapse
I use "x-parts". Search in Google Play
Sent from Xperia Arc S
Wont xparts recovery kill system partition if you format it?
Sent from my LT15i using xda premium
does anyone have stock GB for LT18i?
will using GB 2.3.4 stock work?
jman2131 said:
stock rom for arc
stock rom for arc s
Here is tutorial on how to flash stock rom
root your phone after flashing stock rom (you should know how because you could flash custom rom before despite it failing
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
Click to expand...
Click to collapse
If I flash back to the GB ROM that's available when I use EMMA (when I tried earlier it is the only "service" that came up). Then do the steps outlined here, will it work? Or should i use the 4.0.4 ROM in the link that you provided? -> http://www.filehosting.org/file/details/399620/LT18i_4.1.B.0.587_Generic_Global.ftf

[Resolved] [Q] Help with installing Xperia Ultimate HD, not booting :(

HELP
I have my Friends Xperia Arc (not S) and I have unlocked bootloader and stuff
I wanted to sintall this ROM
http://forum.xda-developers.com/showthread.php?t=1920207
And i followed the instructions so first i had gone into fastboot mode to flash the kernal (I flashed Lupus V12)
And then installed the Rom and went through Aroma installer
After that i had followed the instructions and unchecked reboot and rebooted via cwm
And when it reboots it shows Lubus with the wolf and the phone just gives 2 beeps and then there is a blue light near the usb port and it just goes into CWM
Help please as i need to give the phone back tomorrow
Naweed Reza said:
Thanks
Is there anyway you can redirect this to the Q&A area?
Click to expand...
Click to collapse
Maybe you have applied reboot recovery instead reboot system
Prider555 said:
Maybe you have applied reboot recovery instead reboot system
Click to expand...
Click to collapse
No
There was just one option
Reboot
I followed the instructions and unchecked it
And i rebooted from cwm
See and follow this instructions http://forum.xda-developers.com/showpost.php?p=38538332&postcount=710 Try another kernel - Vegance
BTW: Why do not you asked this question in the subject line of the ROM or theme to the Q & A for this ROM? Here we assume subjects with questions!
kaszell said:
See and follow this instructions http://forum.xda-developers.com/showpost.php?p=38538332&postcount=710 Try another kernel - Vegance
BTW: Why do not you asked this question in the subject line of the ROM or theme to the Q & A for this ROM? Here we assume subjects with questions!
Click to expand...
Click to collapse
Sorry its just that im new to all this :$
Q&A thread: http://forum.xda-developers.com/showthread.php?p=38538332
kaszell said:
Q&A thread: http://forum.xda-developers.com/showthread.php?p=38538332
Click to expand...
Click to collapse
Thanks, asked there as well, but is it fine if people can answer here? really want to get this solved (
Firs see my post. Go to this post: http://forum.xda-developers.com/showpost.php?p=38538332&postcount=710 and follow the instructions. Do everything slowly and patiently and everything will be fine
kaszell said:
Firs see my post. Go to this post: http://forum.xda-developers.com/showpost.php?p=38538332&postcount=710 and follow the instructions. Do everything slowly and patiently and everything will be fine
Click to expand...
Click to collapse
so i isntall the kernal which i have to downlaod to get stock rom?
Or i can do SOny Update service and restore?
Try first install another kernel. Vegance http://forum.xda-developers.com/showthread.php?t=2097138 but flash this only FASTBOOT.
If this does not not work try a clean install like this:
Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
If this does not not help try the tutorial you sent in from the beginning.
kaszell said:
Try first install another kernel. Vegance http://forum.xda-developers.com/showthread.php?t=2097138 but flash this only FASTBOOT.
If this does not not work try a clean install like this:
Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
If this does not not help try the tutorial you sent in from the beginning.
Click to expand...
Click to collapse
before i installed the rom i couldnt wipe battery stats because there was no such problem
Ive rooted my phone which is a mini pro and it had that option but on CWM on the arc it doesnt have
Naweed Reza said:
before i installed the rom i couldnt wipe battery stats because there was no such problem
Ive rooted my phone which is a mini pro and it had that option but on CWM on the arc it doesnt have
Click to expand...
Click to collapse
No. The key point is:
mount and storage -> format /system
Click to expand...
Click to collapse
battery stats do not matter
kaszell said:
No. The key point is: battery stats do not matter
Click to expand...
Click to collapse
Dude thanks alot
I cannot believe it worked
Kudos to you!
My friend is so happy when i told him, pfft, forget that, im happy!
I really want to make it up to you
Love you man

[q] please help

Hello,
I tried to install a custom rom but it failed.
The only thing now that i can is CWM.
everything is deleted from my Storage in the HTC.
I have a NANDROID backup on my pc, but i can't copy this to the HTC STORAGE.
(i click in CWM on mount USB storage, then a screen popups on my pc)
How is this possible? And how do i fix this?
ps, sorry for my bad english, i'm dutch and not so good in english.
Djordi63 said:
Hello,
I tried to install a custom rom but it failed.
The only thing now that i can is CWM.
everything is deleted from my Storage in the HTC.
I have a NANDROID backup on my pc, but i can't copy this to the HTC STORAGE.
(i click in CWM on mount USB storage, then a screen popups on my pc)
How is this possible? And how do i fix this?
ps, sorry for my bad english, i'm dutch and not so good in english.
Click to expand...
Click to collapse
Which sreen pops up on your PC? Can you see the phone storage as a drive on it? Please provide a little bit more information.
[email protected]|-|oR said:
Which sreen pops up on your PC? Can you see the phone storage as a drive on it? Please provide a little bit more information.
Click to expand...
Click to collapse
Yes i see the phone storage as a drive. The only map in it is Clockworkmod
But i cant make a submap or somthing in it.
Djordi63 said:
Yes i see the phone storage as a drive. The only map in it is Clockworkmod
But i cant make a submap or somthing in it.
Click to expand...
Click to collapse
which custom rom were you trying to install?
nogotaclue said:
which custom rom were you trying to install?
Click to expand...
Click to collapse
The viper 4.0.6 rom.
Djordi63 said:
The viper 4.0.6 rom.
Click to expand...
Click to collapse
ok, go to recovery and do a full wipe, format cache, data, system and sdcard.
mount storage and copy the rom to sdcard.
copy the boot.img from the rom zip and put it into your fastboot folder on pc.
now go to bootloader and enter fastboot, now run the command "fastboot flash boot boot.img" then "fastboot erase cache".
now back to recovery and flash the rom
nogotaclue said:
ok, go to recovery and do a full wipe, format cache, data, system and sdcard.
mount storage and copy the rom to sdcard.
copy the boot.img from the rom zip and put it into your fastboot folder on pc.
now go to bootloader and enter fastboot, now run the command "fastboot flash boot boot.img" then "fastboot erase cache".
now back to recovery and flash the rom
Click to expand...
Click to collapse
But at the moment i am not able to copy files to my storage. Wil thiss work when i follow your steps?
Djordi63 said:
But at the moment i am not able to copy files to my storage. Wil thiss work when i follow your steps?
Click to expand...
Click to collapse
of course it will work, I wouldn't tell you to do it otherwise. and why can you not copy files to your storage?
And flash rom WITHOUT wipe
nikola016 said:
And flash rom WITHOUT wipe
Click to expand...
Click to collapse
No,he must flash rom after FULL wipe, if you read the full thread you will see he has already attempted to flash a rom so he needs to do a full wipe to remove any remains of the previous attempt!!
nogotaclue said:
No,he must flash rom after FULL wipe, if you read the full thread you will see he has already attempted to flash a rom so he needs to do a full wipe to remove any remains of the previous attempt!!
Click to expand...
Click to collapse
But if he wiped all from recovery why would ne wipe that again, also viper 4.0.6 has some problem with flashing on full wipe if i remember good
nikola016 said:
But if he wiped all from recovery why would ne wipe that again, also viper 4.0.6 has some problem with flashing on full wipe if i remember good
Click to expand...
Click to collapse
the steps I provided are the steps to ensure foolproof installation of ANY rom. go read the OP of ViperX 4.0.6, it states there that for "full roms, must perform a full wipe"
nogotaclue said:
the steps I provided are the steps to ensure foolproof installation of ANY rom. go read the OP of ViperX 4.0.6, it states there that for "full roms, must perform a full wipe"
Click to expand...
Click to collapse
I use viperx so i know, but wipe from recovery is also full wipe...
nikola016 said:
I use viperx so i know, but wipe from recovery is also full wipe...
Click to expand...
Click to collapse
erm, which is what i told him to do
nogotaclue said:
erm, which is what i told him to do
Click to expand...
Click to collapse
This is little misunderstanding
nikola016 said:
This is little misunderstanding
Click to expand...
Click to collapse
by you yes
Guy's,
It's already fixed.
Thanks for everything!
I pushed a rom with ADB sideload to my mobile!

Categories

Resources