Develop Bugs

[Q] help, i cant flash any custom roms

htc desire hd, so,I had gingerbread 2.3.3 and software # 2.50..., i used advance android hack to hack an root the phone, and apparently everything went good up until i installed the custom rom, it went to the htc welcome screen and stayed there for like 30sec and then it restarted again and again by itself, so i stock restart the phone and put the original rom back, then i tried downgrading the rom to froyo 2.2 and software # 1.32...... i hacked it and root it again but after i installed the custom rom it happened exactly the same it just restarts and restarts by itself to the point where i have to take the battery out ,
I"ve got s-off by the way
any help would be much appreciated
thanks in advance

you`ve got a low version recovery?

vshijiav said:
you`ve got a low version recovery?
Click to expand...
Click to collapse
what do you mean?

I got the same problem. The welcome page again and again. I just restore the stock to and give up the flashing. May be we need to hack the recovery...
Sent from my Desire HD using XDA App

True but I just don't want to give up, custom roms look so nice that I have to find out how to do it, if you find out before me just let me know I'll let you know if I do
Sent from my Desire HD using XDA App

try this one. after downgrading, make an ota update then root it again with ace advance hack kit...

hope this helps
i dont have htc desire( i had neo v) . but i faced the same problem once.
try wiping evrything off before installing the rom
wipe data/factory reset
wipe cache partition
wipe dalvik cache
Format /system (in mounts and storage)
Format /cache
Format /Data
good luck

did you factoryreset, delete cache, dalvic and battery stats befor you flashed the rom? it sounds like you are bootlooping.

first if your using cmw or rom manager to install from get rid of that CRAP!! If your s-off on stock rom get 4ext recovery installed on phone first. Then try installing custom from with it.
1. Factory wipe
2. Wipe cache
3. Wipe dalvik
4. Format partitions (except SD card)
5. Format SD card (optional for total wipe)(Only if you want full fresh install but copy everything on SD to PC so you don't lose important stuff)
6. Mount USB (should only see one folder called 4ext)
7. Move rom to SD card
8. Disconnect USB
9. Install from SD card
10. Choose zip from SD card
11. Flash
12. Reboot
All steps done from 4ext recovery so do not exit recovery till all steps are complete.
Sent from my Desire HD using xda premium

Install JellySandwich 7.1 Friday Error

Hi everybod,
I was using JS 6.2 and try to install 7.1 for a changing. But when i try to install CWM 7.1 there was an error like "bad".(little android icon was down with an error on the background)
Then i roll back to 6.2
What was the problem. Isn't my Kernel or what any opinion?
I have Advanced Stock Kernel.
Thanks

shouldn't be your kernel. See if you installed with the right installation process

jman2131 said:
shouldn't be your kernel. See if you installed with the right installation process
Click to expand...
Click to collapse
Yea i'm sure i'm doing the right installation. I install back to the Jelly Sandwich 6.2.
Is there any differences installing 7.1 and 6.2. I guess not.
-Install the kernel. (Already have Stokc Kernel)
-Put 7.1 setup into sd car.
-Reboot in recovery mode.
-Wipe data and cache
-Choose sd card and install(When i choose i got a broken android icon background and istallation aborted.)
-Then rollback to 6.2
I'm not sure what is wrong. anybody tried 7.1 on Lt15i?
I'm happy with 6.2 but why not more
Thanks.

make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
see if this works.

maybe!!
I am using jelly sandwich 7.0 in my lt15i with no problem.
Haven't tried 7.1 yet cause of it's battery drainage issue.TRY to install 7.0 first
using arc knight 3.5 kernel.
______________________________________________________________________________________
IF YOU THINK I HELPED THEN SHOW IT BY CLICKING THE THANKS ICON.""IT'S FREEEE"":good:

jman2131 said:
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
see if this works.
Click to expand...
Click to collapse
Ok i'll try it after.work. I have tried dalvik.cache but didint try sdcard format things :/
Thanks anyway
amankumar2508007 said:
I am using jelly sandwich 7.0 in my lt15i with no problem.
Haven't tried 7.1 yet cause of it's battery drainage issue.TRY to install 7.0 first
using arc knight 3.5 kernel.
______________________________________________________________________________________
IF YOU THINK I HELPED THEN SHOW IT BY CLICKING THE THANKS ICON.""IT'S FREEEE"":good:
Click to expand...
Click to collapse
Hey,
Some.people ın Jelly sand.topic that 7.0 was a quick release. Some issues solved after 7.1 so that i didint even bother to install 7.0
Also didint know the battery drain.in 7.1 :/
Thanks i'll try 7.0 after the work as well.
Thanks
Sent from my LT15 using xda app-developers app

Do you guys are gaving problem with the credential manager? Ive tried to move the credentialmanager.apk to the sdcard/data and the credentialmanager error message gone but still cant download music info. I havr a walkman app from
Ac!d
Sent from my LT18 using xda app-developers app

julius072179 said:
Do you guys are gaving problem with the credential manager? Ive tried to move the credentialmanager.apk to the sdcard/data and the credentialmanager error message gone but still cant download music info. I havr a walkman app from
Ac!d
Sent from my LT18 using xda app-developers app
Click to expand...
Click to collapse
i'm not sure if this is relevant, though i'm guessing it is. have a look here

[RESOLVED] [Q] arc s problem

Hi guys, I just have a little problem (little ? ^^)
So, I rooted my xperia arc S, and then I tried to intall a new ROM Xperia purness rom ( http://forum.xda-developers.com/showthread.php?t=1737862 ). I followed the steps to do it, and it didn't reboot. It just displayed the bootloader with "SONY". Can I flash a firmware with flashtools and root it again ? I can't return to the recovery to restore my backup
Help please.
Tks

Ya sure u can flash stock os with flashtool & rerooted ur phone
Sent fromXperia Arc S LT18i with Rooted/Unlocked Bootloader & custom xperia s os

just reflash the firmware and root it. Here's a rootable one
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install pureness from sd card without rebooting
see if this works

jman2131 said:
just reflash the firmware and root it. Here's
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install pureness from sd card without rebooting
see if this works
Click to expand...
Click to collapse
I cant go to recovery

I know, that's why you flash firmware I linked to you and install cwm and then access recovery

jman2131 said:
I know, that's why you flash firmware I linked to you and install cwm and then access recovery
Click to expand...
Click to collapse
Okay, I'm downloading the firmware .587 to flash it BUT, I have a problem, my batery is not full.. and I can't charg it.. What can I do ?

is the charging problem coming from the cable or the actual phone? Try to charge with another cable and see if it charges normally

sach9560 said:
Okay, I'm downloading the firmware .587 to flash it BUT, I have a problem, my batery is not full.. and I can't charg it.. What can I do ?
Click to expand...
Click to collapse
If u charge trough pc try direct ac charginging.
Sent fromXperia Arc S LT18i with Rooted/Unlocked Bootloader & custom xperia s os

jman2131 said:
is the charging problem coming from the cable or the actual phone? Try to charge with another cable and see if it charges normally
Click to expand...
Click to collapse
No, I'm at my grand mother with my dad and I forgot my cable. So My dad charged his phone this night and this morning I tried to install the ROM. (I know I'm telling you my life lol). And the problem happened this morning so I couldn't charg it. But I just flashed le .587 firmware. It's Okay. Tks very much

[ROM] [LB&UB] (ODEX) Rooted Sony Stock 10.3.1.A.2.67 Flashable Rom C6506

Rooted Sony stock 10.3.1.A.2.67 Flashable Rom Xperia ZL
For Locked and Unlocked Bootloaders
Hi Everyone,
Here is a rooted stock 10.3.1.A.2.67 (Generic ES unbranded) rom.
Hope you like it
Rom features:
> Rooted with the latest SuperSU
Installation instructions:
If you're already running the 10.3.1.A.2.67 stock rom:
Copy the rom to your microSD
Backup any important data to your microSD
Boot into recovery and do a nandroid backup first
If you have CWM: select Wipe cache partition and wipe dalvik cache, go into 'mounts and storage' and select Format /system, then /data, then /cache
If you have TWRP: select Wipe then Advanced Wipe, tick Dalvik Cache, System, Cache and Data then wipe.
Install the rom and enjoy!
*the first boot will take a while just be patient
If you're running 10.3.1.A.0.244 or any previous firmware:
Copy the rom to your microSD
Make sure you update to 2.67 before flashing.
Backup any important data to your microSD
Boot into recovery and do a nandroid backup first
If you have CWM: select Wipe cache partition and wipe dalvik cache, go into 'mounts and storage' and select Format /system, then /data, then /cache
If you have TWRP: select Wipe then Advanced Wipe, tick Dalvik Cache, System, Cache and Data then wipe.
Flash the rom
When done
Turn on phone and enjoy!
If you're running any CM/AOSP based rom:
Follow the exact same steps for If you're running 10.3.1.A.0.244 or any previous firmware above.
Downloads:
Stock 10.3.1.A.2.67 Rooted:
https://docs.google.com/file/d/0BwF8jyhDVfJwaEVYeWp4RDQ2YXc/edit?usp=sharing
Please hit the thanks button if you like this rom

In process of making full 2.67 ftf. will make a seperate one tmrw with only baseband and kernel just its 3:08 am and almost passing out waiting for stuff to be done sorry will continue tmrw

Finally, a stock deodexed .67 rom. My prayers have been answered. This was made specifically for the C6506? I'd like to have an LTE icon instead of just plain 4G. Thanks.

Not sure about 4g icon or lte icon but if i can modify somehow to change it so it shows lte, then it will be done I am still working on making the 2.67 ftf and from then I have to make a flashable .zip from it tht can be flashed through cwm and then I have to port the xperia z rom over So I have my work cut out for me And not to mention I have my daily life to live too so I can't be doing this 24/7 lol. That would just drain me.

Waiting!

Link is up enjoy

dragonmhawk said:
Link is up enjoy
Click to expand...
Click to collapse
cant flash via cwm.. getting error massage

Did you do full wipe of /system /data /cache /dalvik cache? in cwm? and did you do everything in the instructions?

Can you deodex this rom?

That can always be done through an app from the play store long as you have root

I don't see any app that does it. What is it specifically?

I also get an error when trying to flash this.
"E:Error in /storage/sdcard1/ROM.zip"
There's no MD5 signature to verify. I am using CWM v6.0.4.4 and coming from the latest CM 10.2 Nightly.

android tuner is able to do it. its a free app

i made this by simply putting it all together so make sure you don't have signature verification on in cwm otherwise it won't work. Its just basic stock odex. Deodex is easy with android tuner and root is required for android tuner of course.

Brick
dragonmhawk said:
i made this by simply putting it all together so make sure you don't have signature verification on in cwm otherwise it won't work. Its just basic stock odex. Deodex is easy with android tuner and root is required for android tuner of course.
Click to expand...
Click to collapse
Could be my mistake, or bad download...but flash did occur, without any error messages. However, it simply did not copy any files. All I was left was a SONY logo. Had to press off inside SIM compartment and use flashtool to fresh install a FTF via flashmode.

Is it me or I just can't see an option in android tuner for deodexing the rom.

when u optimize all apps it deodexs it automatically and tht its all in the settings its really extensive though u have to go through everything to find it. everything can be set on boot pretty much

So, this is a deodexed rom? or not a deodexed rom?

What does it say in the title of the thread?

dragonmhawk said:
What does it say in the title of the thread?
Click to expand...
Click to collapse
Says odex... but some of the posts left me wondering...
at this point, I think I want to say with deodexed...

[Q] How To Flash CM10 In HTC Wildfire S

I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.

Khizar hayyat said:
I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.
Click to expand...
Click to collapse
Try THIS.

testmasterbd said:
Try THIS.
Click to expand...
Click to collapse
Thanks For Your Valuable Reply Brother,
But Is There Any More Simpler Then This?????

Khizar hayyat said:
Thanks For Your Valuable Reply Brother,
But Is There Any More Simpler Then This?????
Click to expand...
Click to collapse
I don't think so. Just read full thread several times with patience then you'll be understood.

testmasterbd said:
I don't think so. Just read full thread several times with patience then you'll be understood.
Click to expand...
Click to collapse
But This Method Is Only For A510e & A510c But I Have A510b?

Khizar hayyat said:
But This Method Is Only For A510e & A510c But I Have A510b?
Click to expand...
Click to collapse
Via CWM recovery all ROM flashing way is almost same, no matter which model you have. But the matter is which version (ROM/kernel) support your device. Before flashing new ROM you need to confirm few things:
1. Bootloader status
2. S-NO/OFF
3. Root status
4. Supported Custom Recovery
5. Is that ROM/kernel support your device?
Click to expand...
Click to collapse
If these issues are met then you can go further. Now download your desired ROM and GApps in your SD card (root-directory of your eg. /storage/sdcard/0/) and follow the thread (your desired ROM) instruction (if there are) or follow these:
Code:
Boot into your Custom Recovery
wipe data/factory reset & cache partition
wipe battery stats (if this option available in your custom recovery)
wipe dalvik cache
format everything except sdcard
Flash the files via "install zip from sdcard" > "choose zip from sdcard"
wipe cache partition (remember your gapps install location. If, the location is cache partition then leave it)
wipe dalvik cache
reboot system
Remember you need good battery health before going recovery mode. Hope this will help you.

testmasterbd said:
Via CWM recovery all ROM flashing way is almost same, no matter which model you have. But the matter is which version (ROM/kernel) support your device. Before flashing new ROM you need to confirm few things:
If these issues are met then you can go further. Now download your desired ROM and GApps in your SD card (root-directory of your eg. /storage/sdcard/0/) and follow the thread (your desired ROM) instruction (if there are) or follow these:
Code:
Boot into your Custom Recovery
wipe data/factory reset & cache partition
wipe battery stats (if this option available in your custom recovery)
wipe dalvik cache
format everything except sdcard
Flash the files via "install zip from sdcard" > "choose zip from sdcard"
wipe cache partition (remember your gapps install location. If, the location is cache partition then leave it)
wipe dalvik cache
reboot system
Remember you need good battery health before going recovery mode. Hope this will help you.
Click to expand...
Click to collapse
This Looks Easier So Brother My Bootloader Is Unlocked And Device Is Rooted Dont Know About S-on And Off If Will Give Me A Recovery And Custom Rom So I am Very Thankful To U.
Sorry For Bad English

Khizar hayyat said:
Dont Know About S-on And Off
Click to expand...
Click to collapse
Check this
---------- Post added 1st August 2014 at 12:25 AM ---------- Previous post was 31st July 2014 at 11:55 PM ----------
If Will Give Me A Recovery And Custom Rom So I am Very Thankful To U.
Click to expand...
Click to collapse
Recovery and for Custom ROM - better, you decide first.

my first post by the way
Khizar hayyat said:
I have A Rooted Wildfire S How To Flash CM10 Or Anyother Jellybean Rom On It.
I Am A Noob In Flashing Rom On HTC Devices Please Gimme Full Detailed information about Upgrading To Jellybean.
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2481155 this rom
its the best rom i installed on htc wildfire s, its fast to, gapps included, everything works
copy it into sd card
then if u havent installed cwm
download rom manager
then open it
and click recovery setup
then install or update recovery
then pick ur device
then flash cwm recovery(2nd option)
and wait for download
after that in same app
choose reboot into recovery
then when phone reboots into recovery
pick install from sd card
i think u know the rest
i hope i was enough detailed