hi
thanks to this forum i installed CM11 on my phone and it's all good, but i heard recommendations about CM9 with hurtsky's kernel and i want to install it now.
i already downloaded the CM9 rom, gapps and kernel. my phone now has CM11 (installed with CWM).
i need step by step instructions how to change to the CM9+kernel i downloaded... hope you help me guys thanks alot :laugh:
open recovery mode
wipe data
wipe cache
format system
install rom
install gapp if needed
to install kernel also same way..
enjoy...
purnama_durja said:
open recovery mode
wipe data
wipe cache
format system
install rom
install gapp if needed
to install kernel also same way..
enjoy...
Click to expand...
Click to collapse
format system = mounts and storage----> format /system ?
and when i want to install kernel, if i wipe and format again, the rom will not be deleted?
lightmess5 said:
hi
thanks to this forum i installed CM11 on my phone and it's all good, but i heard recommendations about CM9 with hurtsky's kernel and i want to install it now.
i already downloaded the CM9 rom, gapps and kernel. my phone now has CM11 (installed with CWM).
i need step by step instructions how to change to the CM9+kernel i downloaded... hope you help me guys thanks alot :laugh:
Click to expand...
Click to collapse
Do a clean installation:
I assumed that you already saved cm9 rom and cm9 gapps in your external sd-card so, boot into recovery mode then,
select "wipe data / factory reset"
go to "mounts & storage" and format /system.
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
install cm9 rom
install cm9 gapps
reboot your phone
Related
i have a unlocked & rooted galaxy nexus....i flash the rom open kang build 22 & flash the gapps 4.0.4 after i rebooted. i stocked in bootanimation & hang up & appear the google logo, always like that...cannot start.....HELP please....
Wipe and reflash the ROM then Gapps, then boot.
Did you do a full wipe. Wipe factory/data, cache partition and in the advanced menu wipe dalvik cache. Then flash rom and gapps
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
i already do full wipe & still the same problem?
1. Wipe data
2. Wipe cache
3. Wipe dalvik cache
4. Flash ROM
5. Flash Gapps
6. Reboot
krisjuls said:
i already do full wipe & still the same problem?
Click to expand...
Click to collapse
In addition to doing what Eddy says, re-download the rom and Gapps.
Thanks for reply but still the same problem
charlieb620 said:
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
Click to expand...
Click to collapse
I always flash like that never have a problem. Never reflash after flash. Try to flash another ROM OP to see if it was the ROM or not.
Sent from my Galaxy Nexus using Tapatalk
i install other rom foxhound ang still the same problem
i choose the show log it says rm: can't remove '/data/dalvik-cache':no such file or directory....rm:can't remove '/cache/dalvik-cache:no such file or directory.....rm: can't remove '/sd-ext/dalvik-cache': no such file or deirectory
Thanks guys for all ur reply & time.......i already done all...its ok now, i use the wugfresh to flash stock & unroot and unlock & unroot again.Again Many Thanks
Hey,I just flashed twrp's last recovery and now i want to flash a 4.2.1 rom,what should I wipe? Cuz i never used twrp before and I don't wanna dk smth wrong :-/ should I wipe everything except Internal/external memory?
calinoii said:
Hey,I just flashed twrp's last recovery and now i want to flash a 4.2.1 rom,what should I wipe? Cuz i never used twrp before and I don't wanna dk smth wrong :-/ should I wipe everything except Internal/external memory?
Click to expand...
Click to collapse
Factory reset, format /system
Flash rom
Edit: this is how I flash roms and I NEVER had an extra issue by doing so.
Sent from my i9250
calinoii said:
Hey,I just flashed twrp's last recovery and now i want to flash a 4.2.1 rom,what should I wipe? Cuz i never used twrp before and I don't wanna dk smth wrong :-/ should I wipe everything except Internal/external memory?
Click to expand...
Click to collapse
this how i flash ANY rom and have never had issues..
1. factory reset
2. wipe system
3. wipe cache
4. wipe dalvik
5. flash rom
6. flash gapps
7. reboot
k786 said:
this how i flash ANY rom and have never had issues..
1. factory reset
2. wipe system
3. wipe cache
4. wipe dalvik
5. flash rom
6. flash gapps
7. reboot
Click to expand...
Click to collapse
+1 :good:
Note to OP: Don't flash Gapps if it is included already in the ROM you installed.
after flash i wipe the cache/dalvik. I think it is the option after you flash in twrp.
Thanks for your answers
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot
davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT
Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y
I'm sorry.. i post this question because i want to know if i do something bad at installing Roms because i always had a bunch of issues, more than anyone reported in the Rom post..
I will post my way to install the Rom:
1. Install stock Rom with KDZ
2. Full Wipe/Format
3. Root
4. Unlock Bootloader
5. Copy Rom, Gapps and Kernel into SD
6. Go to Recovery and Wipe Dalvik/Cache
7. Install Rom
8. Wipe Dalvik/Cache
9. Reboot Recovery
10. Install Gapps
11. Wipe Dalvik/Cache
12. Reboot Recovery
13. Install Kernel
14. Wipe Dalvik/Cache
15. Boot as normal
D4rk_W0lf said:
I'm sorry.. i post this question because i want to know if i do something bad at installing Roms because i always had a bunch of issues, more than anyone reported in the Rom post..
I will post my way to install the Rom:
1. Install stock Rom with KDZ
2. Full Wipe/Format
3. Root
4. Unlock Bootloader
5. Copy Rom, Gapps and Kernel into SD
6. Go to Recovery and Wipe Dalvik/Cache
7. Install Rom
8. Wipe Dalvik/Cache
9. Reboot Recovery
10. Install Gapps
11. Wipe Dalvik/Cache
12. Reboot Recovery
13. Install Kernel
14. Wipe Dalvik/Cache
15. Boot as normal
Click to expand...
Click to collapse
1.Instal KDZ
2.Full wipe
3.Root
4.Unlock bootloader
5.Copy Rom, Gapps and Kernel into SD
6.FULL WIPE
7.Instal rom and kernel (gapps if need)
8.Boot normal
But you dont must instal every time KDZ
Sent from my LG-E975 using xda app-developers app
seba2121 said:
1.Instal KDZ
2.Full wipe
3.Root
4.Unlock bootloader
5.Copy Rom, Gapps and Kernel into SD
6.FULL WIPE
7.Instal rom and kernel (gapps if need)
8.Boot normal
Sent from my LG-E975 using xda app-developers app
Click to expand...
Click to collapse
I will try that tomorrow.. I hope it erases all my bugs..
One noob question... Full Wipe is Factory Reset?
Edit: Formated Everything except internal storage before install Rom, then.. something strange happened.. my backgroud menu was bugged.. like seeing another menu behind settings menu.. even in twrp i saw the original USB menu of stock..
Not just factory reset. A full wife is made in cwm recovery and it has 3 stages : factory wipe/data,wipe cache partition,wipe dalvik cache, format /system.
Sent from my EchoE'd GT-I9505/smart phones,dumb people.
kimitza said:
Not just factory reset. A full wife is made in cwm recovery and it has 3 stages : factory wipe/data,wipe cache partition,wipe dalvik cache, format /system.
Sent from my EchoE'd GT-I9505/smart phones,dumb people.
Click to expand...
Click to collapse
A full wipe doesn't mean format /system. If you format system after flashing a rom then there is no rom exists in your phone anymore. Performing a factory reset also clean cache partition too.
if you would've payed attention, he mentioned he made the wipes BEFORE flashing a custom rom. so, yes, it's recommended to perform a /system format.
I can't update my N7100 from previous Omnirom to latest CM11. I wiped my phone, installing latest CM11 zip and phone is stuck at N7100 logo and restart to recovery. When I install Omni zip everything is working fine. I'm tried TWRP and Philz recovery but no results. Please help
did you wipe /system, /cache, /data and dalvik? (full wipe).
atmos929 said:
did you wipe /system, /cache, /data and dalvik? (full wipe).
Click to expand...
Click to collapse
Yes of course but I think CM isn't extracting to /system because when I leave recovery it shows there's no root and asks if I want to install it.
emlo16 said:
Yes of course but I think CM isn't extracting to /system because when I leave recovery it shows there's no root and asks if I want to install it.
Click to expand...
Click to collapse
Recoveries tend to do that... they do not detect superuser from any CM based ROM and offer you to install supersu after a ROM install and rebooting system.
I you do full wipes and you have tested latest Philz and TWRP recoveries... I can only suggest you to double check that the CM11 ROM is the correct one for your N7100.
It is strange that you encounter issues with CM based ROMs... these usually install without problems... I've encountered problems booting TW based ROMs, but not these. Sorry I can't be or more help. Good luck .
EDIT:: wait a second... according to your screenshot, you did a full wipe after installing the CM ROM... you are deleting your ROM that you just installed . The steps are:
1.- full wipe
2.- install ROM
3.- Install GAPPS
4.- wipe Dalvik <-- (some devs recommend this step, others don't... doesn't hurt to do it anyway)