Hello,
I noticed that the proximity sensor on my Z1C is always on when the display is off (red light in the top left corner).
Is that normal? Is it also the case for some of you? How can I resolve this?
Thanks,
Do you have app which imitate double tap to awake or something similar?
Wysłane z mojego D5503 przy użyciu Tapatalka
I did install Gravity Screen but I uninstalled it...
Apart from that one, nothing similar to report.
What can I do to resolve this problem?
Install again this app and try to set in settings something to turn off anything and then uninstall this app gravity cause that because it uses proximity sensor and couple others sensors
Wysłane z mojego D5503 przy użyciu Tapatalka
Still not resolved. Thank you for the help though . I have a red light in the top left corner, that's the proximity sensor right?
Yes red light is proximity you can check in factory settings if your proximity is always active check when you reboot your phone if your proximity is on right after reboot or if is switching on couple of seconds after reboot something is definitely turning it on
Wysłane z mojego D5503 przy użyciu Tapatalka
I rebooted and it turns on at the end of the boot sequence, right before the lockscreen appeared..
flotheking said:
I rebooted and it turns on at the end of the boot sequence, right before the lockscreen appeared..
Click to expand...
Click to collapse
Uninstall Xposed
If that doesn't fix then make a nadroid backup and do a factory reset. If it's still on after the reset then it's a hardware problem and Sony will fix it.
Related
I'm looking for a working camera flash notification (calls mainly) aplication. My system is MIUI on 4.1.1 or Demoilition on XELLA.
I tested Lightflow - no option for camera flash Led
Flashlight notifier
Flashlight call
Flash Blink.
What is the point of such function?
First of all, camera LED takes lots battery,
and In second, when people put download the phone I guess most people is make it face up and back down position as Phone's camera flash will be covered and you won't see it...
Even your have to consider the possibility of damaging the camera LED, I supposed it is not made for such purpose, not like the front LED notificator ...
And by the way, there is camera flash options in Light Flow, at least in paid version through I didn't test it
Sent from my GT-I9300 using xda premium
Odp: [q]Camera Flash led for incoming call on MIUI
Well... I was going to test that type of notification and make sure that it is nonsense. Point is that in car sometimes i can't hear ringtone and vibrations so i was going to test blinking flash.
Problem is that aplications i tested are not working on miui. I think i just pass.
Wysyłane z mojego Nexus 7 za pomocą Tapatalk 2
The app you're looking for is called beacon i believe uses the camera flash light for notification. Useless program..
[Problem] "Self-working" after screen off, "self-tapping", strange
Hi,
I have my Xperia z1c for 2 week. Some days ago i observed strange problem. When I turn off screen phone starts to using some functions like, camera, browser, calculator etc. When I turn on the screen i can see sth like sb is tapping on the screen, even when I don't. I have to wait some time or once more turn-off screen and turn-on and everything is fine for some time. I have no virus, I already checked that by a few apps. I use stamina option - can it be this (why?)? I have no strange app from nowhere only apps which I know and I had on my previous phone. I have non rootes device from Polish distribution.
Please help!
Hehe nice problem I have phone from polish dystrybution too and i dont have such a problem i think you need to do factory reset and check after this is the only way to reset everything to factory state and clean potentialy mess hehe
Wysłane z mojego D5503 przy użyciu Tapatalka
I hope that sb has similar problem or know the solution. Because I do not want to reset all phone. I will do it if there will be no solution
Long shot.. but could it have anything to do with a 3rd party screen protector that you have on the phone? I remember when I had a really cheap one, it responded strangely to my touches. Or Glove Mode (settings, display, glove mode)?
LaZiODROID said:
Long shot.. but could it have anything to do with a 3rd party screen protector that you have on the phone? I remember when I had a really cheap one, it responded strangely to my touches. Or Glove Mode (settings, display, glove mode)?
Click to expand...
Click to collapse
Glove mode is off. But when screen if off, i mean locked, so there is no possibility to "tap" on the phone even by the cheap protector.
Now i've done protecion by pattern and we will see if this will help anything.
Today I received my 5x everything is good except pne thing, I cant see notification led blink yet. I suspect if it's broken. I have also enabled pulse led under sounds and notification.
Can anyone confirm if the led lights up while charging or not.
or how do I test the led?
There is no led notification for charging. Just test if you get the led light blinking when you got a missed message or not.
Wysłane z mojego Nexus 5X przy użyciu Tapatalka
thanks for confirming. It now works for notifications after a restart for some weird reason.
You have to enable it. It doesn't come enabled. I find the notification light as well as ambient display not work 100% though
Sent from my Nexus 5X using Tapatalk
Use the app light flow from the play store to customize the led, I use it with no problems. But like stated above it comes off by default.
https://play.google.com/store/apps/details?id=com.rageconsulting.android.lightflowlite&hl=en
Notchr302 said:
You have to enable it. It doesn't come enabled. I find the notification light as well as ambient display not work 100% though
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
yes ambient display never worked for me whenever I expected it to work. Maybe something wrong with the way I pick up my phone. lol
Darke5tShad0w said:
Use the app light flow from the play store to customize the led, I use it with no problems. But like stated above it comes off by default.
https://play.google.com/store/apps/details?id=com.rageconsulting.android.lightflowlite&hl=en
Click to expand...
Click to collapse
yes I am using it from yesterday. works great.
Just took out HTC10 from the box, fresh install and I have noticed that BACK button light is not working
I have googled for any solution and only found this: http://recomhub.com/blog/how-to-fix-htc-10-back-button-not-working/ which does not help me as I dont have those options
Any suggestions?
I don't know what kind of drugs the person that wrote that webpage was on. The correct menu option can be found under Settings > Display, gestures & buttons.
there are no options to disable/enable lights on buttons
No one said there were.
so is this hardware issue with the phone then? right button light is just fine
Unfortunately it sounds like it is a hardware issue.
I have connected 10 to my car audio to test mirror link.. after a while I have noticed that back button has a light. After few hours it does not light anymore. Maybe it's more like a software issue then?
Wysłane z mojego SM-T815 przy użyciu Tapatalka
Could be software but I would lean toward hardware issue with the power system of the phone. That LED is not getting enough juice to stay lit, its poser dropping off faster than the rest of the phone. If it is an electronics issue it may get worse/spread over time and use.
Not necessary a hardware issue. It works again when I turned on light near me.
Will observe during weekend
Wysłane z mojego SM-T815 przy użyciu Tapatalka
I have Sprint version and can opt to have button lights on only when pressed or when screen is on.
Under Settings>>Display, gesture & buttons>> Navigation Button backlight option>> Auto off when inactive or always on when screen on?
You don't have this option? Or its not working?
Sent from my HTC 10 using Tapatalk
this problem solve? i've back/multitask light off and not function ,this must be hardware problem? where i can buy for the flexible back/multitask?
Hello
I think I have a problem with my proximity sensor.
Whenever I make or receive a phone call, my display turns completely black.
Is there a way to solve this problem through software configuration (make thr display always on when making a call, for example)?
Thanks
Enviado de meu Moto Z (2) usando o Tapatalk