Develop Bugs

AOKP 4.2 & CM 10.1 Nightly Q & A thread

This thread is a place for people to ask questions and get answers about CM 10.1 Nighty and Official when it comes out. This thread is the proper place for these kind of questions for now.
Link to CM 10.1 Nightly
http://jenkinsmanifest.clockworkmod.com/device/d2att/all
CM 10.1 Changelog credit lisek99
http://10.1.cmxlog.com/?device=d2att
4.2 GAPPS Credit Mike Ramsay
http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip
Ktoonsez 4.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1871946
CyanogenMod's Progress
http://review.cyanogenmod.org/#/q/status:merged,n,z
itsmikeramsay's rendition of CM 10.1
http://forum.xda-developers.com/showthread.php?t=2039995
It has "..a few cherry-picks. We're shooting for that sweet spot between CM10.1 and AOKP."
Euroskank CM 10.1 kang d2att
http://forum.xda-developers.com/showthread.php?t=1806921
has cherry picks as well
Common Flash Process
1. wipe cache/dalvik
2. wipe system
3. factory reset
4. wipe data
5. TWRP users wipe internal-wipes internal data that could corrupt something
6. flash rom
7. flash gapps
Do this if you have any unexpected problems.
If you want flash ktoonsez kernel but if you have problems follow the flashing procedure before posting about problems/questions
Possible Data Fix
Alright, for anyone having issues with the CM10.1 "pre-release" builds (official or otherwise) not allowing you to keep a connection, here's how to fix it:
Download one of the modem files for your device (read!) in the OP of the modem thread. Any of the options will work, pick the one you want.
Keep that ZIP on your EXTERNAL storage. You need to be able to find it from CWM/TWRP.
With CM10.1 running, disable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (uncheck it)
Reboot into recovery. (Long-press Power, "Reboot", "Recovery", [OK])
Flash the modem from step 1.
Clear Cache and Dalvik Cache.
Reboot back into CM10.1.
Wait 30 seconds!
Enable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (check it).
You should have data within 10-20 seconds!
If this doesn't work, you might need to reset your APNs to default. This will only happen if you make changes to your APNs, so go into the APN list and press the menu key and hit "Reset to defaults". Then start over at step 1.
To prevent this problem, you should disable data before shutting off your device. You can enable it 30 seconds after boot and it should work again. If you get stuck in the "disconnect-loop", repeat these steps.
Themes
Sense 4 10.1 theme (might work for other roms)
http://forum.xda-developers.com/showthread.php?t=2051326

My dataaa, oh my dataaaa.
I almost have everything working, however I can't seem to get my 4G data to work.

khep24 said:
I almost have everything working, however I can't seem to get my 4G data to work.
Click to expand...
Click to collapse
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?

smelenchuk said:
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
Click to expand...
Click to collapse
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks

khep24 said:
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
Click to expand...
Click to collapse
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).

smelenchuk said:
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
Click to expand...
Click to collapse
There it goes , that did the trick thanks for the help. Now my GS3 is working perfectly with the update.

Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7

sliverboyx2002 said:
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm going to offer the same suggestions: check your APN settings (that seems to be the big one for AT&T) and check your network types.
I assume you've had LTE coverage under other ROMs?

Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium

Everything installs fine,....but the google play store gives me a "no connection" error....but browsing the internet works fine. I followed all the steps exactly.

zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Are no files displayed at all or is it just displaying differently? Once I updated, it moved all my files to the folder/0. Check there and it should display your folders as on 4.1. I believe it has to do with the multiple user functionality.
Sent from my Nexus 7 using xda app-developers app

When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium

zap12341 said:
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I can't see any folders either. Same ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium

zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its a preview. Its not supposed to work. The preview I released is basically just a screenshot of what's to come. I haven't even release a full ROM yet.

Emoticons
The emoticons are now implemented in the keyboard, is there a way to flash em over or download em. If anyone else has this issue let me know.

I can't get Portable Wi-Fi hotspot to work?
any ideas, has anyone else tried it?
is there a way to submit bug reports for nightly builds?

no data connection at all now via the radio.(but the phone can receive & make calls) I followed the steps to check it as posted by another user above....but still tryin different modem files.

did you try the fix in the op?

CM10.1 on Bell Galaxy SIII
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.

wujiku said:
did you try the fix in the op?
Click to expand...
Click to collapse
Ya that's what I've been working on. I finally did get it working (for now) with the modem 3rd down on the list.
Does CM10.1 have a LTE icon that appears when LTE is being used, or does it always just say "4G"?
---------- Post added at 06:48 PM ---------- Previous post was at 06:39 PM ----------
ebfortin said:
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
Click to expand...
Click to collapse
This is getting to be my experience. I just tried a few different modems, and finally got it to work...then I decided to reboot...and it stopped working. A few reboots later, and it still is down for the count. I guess I'll try another modem.

[Q] Can't send sms and greyed bar after cm 10.2

Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Edit: It's a sgh-t999v as printed behind the battery. I followed this guide http://forum.xda-developers.com/showthread.php?t=1775616 hence the reason why I'm coming from ICS. Looks like I'll have to reflash using ODIN which i was trying to avoid out of fear of bricking but it seems like my only option now.

kyuubie said:
Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Click to expand...
Click to collapse
Might not be the right ROM for your phone. Or it could be buggy. I've messed around with a few and finally found a great one that seems to be working well for me. I have the d2ltetmo. I'm running Liquid Smooth ROM with 4.2.2 and TWRP 2500 recovery. The ROM roots your phone as well. Any questions feel free to ask. Hope I can help!:cyclops:

I wouldn't flash D2MTR Rom to D2TMO. Too many differing things. There's a CM for D2TMO too.

Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk

serio22 said:
Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Well after a long process of flashing stock jb then finding a proper method of flashing cwm since i had difficulties with fastboot and went with the dd if-of method using the terminal emulator. I am finally on a stable cm 10.2 rom, d2tmo, where everything seems to be working and intact. Thanks for the advice now i have the long process of restoring my apps and data and what not with titanium backup.

CM11 No Mobile Network, Mobile Network State Disconnected

Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.

I have the same problem. Been searching for a while and trying different fixes, but doesn't seem to be working. I'm on ATT galaxy S3, tho. If someone's got a working ATT S3 and let me know exactly what ROM, gapp, modem, etc they used, would much appreciate it.

Keyonwise said:
Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.
Click to expand...
Click to collapse
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.

This may work...
So, after trying countless options that i found on this site, and after dozens of flashing roms, modems, kernels, booloaders, restores, etc... turns out that i was doing everything right and there was nothing wrong with the install or the phone itself. After contacting my carrier (PTEL Mobile) for the third time, (first time they told me they had an outage, second time they told me to set the APN setting correctly - neither of which was incorrect on my end or the cause), they said they will try RESETting the DATA on their end. And guess what - that worked.
If you think you did everything correctly but still not getting data, i suggest you make your provider to do the same, or at least pry them as much as you can about your problem and what they can do about it. I wasted to much time and effort (my poor phone) on this and the solution was simple, and not my fault. Hope this helps others.

Mr. Struck said:
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.
Click to expand...
Click to collapse
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.

S0lstice said:
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.
Click to expand...
Click to collapse
Deleting asserts is only for d2spr specific builds, that doesn't apply to d2lte builds (hence the reference to "pre-unified builds" in my first post). Your issue is most likely also related to APN's. However, there are also known data issues on a lot of the latest CM nightlies, and also on the ROM's that rely heavily on CM as a code source. I would strongly recommend reading the last several pages of the thread for any ROM that falls into this category in order to see what other users are reporting along these lines.

CM11 No Mobile Network
Hey guys,
Noob here. I'm running CM11-20140428-NIGHTLY-jflte on a Galaxy S4 GT-i9507(international, optus) but bootscreen now says 9505(not sure if that's important).
I've had Mobile Network State: Disconnected for the last three nightlies. On CM11 M3 it was working all good, but now no luck.
So I've tried a few things and I've come to the point where I'm going to try the factory reset then reflash CM11 and fingers crossed it will work.
Can anyone talk me through the proper procedure for this? I've made a full backup on my external SD using CWM 6.0.4.7 and transferred it to
computer just in case. So would anyone be awesome enough to take me through it step by step.
Cheers,

hhmmm
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue

CM11 No Mobile Network
Ickyz said:
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue
Click to expand...
Click to collapse
Just Fixed Permissions using Rom Manager, still no good.

Stock no APN settings at all
I have looked everywhere and found nothing for the last 3 weeks. I have a stock, sprint S3 on straight talk (my son's phone) it will not get 4g lte data what so ever. My phone is the exact same phone, and it does get 4g lte data. I tried all the basics ##72786# data on off check airplane mode...nothing. Mobile network state is "disconnected". So I opened data ##3282# to compare apn settings with my phone. I made sure everything matched, and when I get to "LTE APN Settings" I open it up, and nothing is there except APNs nothing, blank. Also missing is "Dial Up Networking" that option does not exist on my son's phone. He updated to kitkat (uggh) but the problem was present before that. Checked the phone, and it is not rooted. Funny thing is the phone updates with 4g lte running after dialing ##72786#, but that goes away after it completes. Texting works, but no mms (pictures etc.) and if I set it to cdma only it gets 3g, otherwise no data at all. Anybody?

[Q] Lost LTE after switching to KitKat

I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!

snak1e said:
I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!
Click to expand...
Click to collapse
Any of the ROMS that have [TW] in the title should work. Full Knox only comes with flashing a tar file in ODIN, because your flashing every partition of the phone. Modified stock ROM zips do not have knox, unless otherwise noted. Make sure to do a prl and profile update when you flash to stock.
sent from my Gs3

joeyhdownsouth said:
Any of the ROMS that have [TW] in the title should work. Full Knox only comes with flashing a tar file in ODIN, because your flashing every partition of the phone. Modified stock ROM zips do not have knox, unless otherwise noted. Make sure to do a prl and profile update when you flash to stock.
sent from my Gs3
Click to expand...
Click to collapse
Flashed Wicked Sensations last night with the MK3 modem and I seemed to be getting LTE as soon as that booted. Updated my PRL and Profile, and then wiped. Installed AOSB again, and I seemed to be getting LTE until I rebooted. After the first reboot I seem to be stuck in 3G again.

Im currently running AOSB on 2 devices. When I first flashed them, I had the same issue until I rebooted the phone. After that I never had this issue again.
sent from my Gs3

joeyhdownsouth said:
Im currently running AOSB on 2 devices. When I first flashed them, I had the same issue until I rebooted the phone. After that I never had this issue again.
sent from my Gs3
Click to expand...
Click to collapse
I think that's the opposite of what happened to me. My status bar said I had LTE when I first booted AOSB (this was after flashing/wiping TW). After the first reboot it connected to 3G and I haven't seen the LTE signal since.
I have updated the APNs, but I was using the same APNs for a while and had LTE on CM10.2 with them.

snak1e said:
I think that's the opposite of what happened to me. My status bar said I had LTE when I first booted AOSB (this was after flashing/wiping TW). After the first reboot it connected to 3G and I haven't seen the LTE signal since.
I have updated the APNs, but I was using the same APNs for a while and had LTE on CM10.2 with them.
Click to expand...
Click to collapse
This is something wierd with Kitkat. I do not believe a fix has been found just yet. but if you dial *#*#info#*#* on most phones you can get into the phone systems and turn LTE back on.

ShrekOpher said:
This is something wierd with Kitkat. I do not believe a fix has been found just yet. but if you dial *#*#info#*#* on most phones you can get into the phone systems and turn LTE back on.
Click to expand...
Click to collapse
I didn't know about this menu. Thanks for that. I went into Phone Info and tried selecting LTE only but it didn't connect to anything. Not sure what that means. There are other
There are some other options in there for networks (e.g. TD-SCDMA, CDMA auto). Would any of them help picking up Sprint LTE?
Other options include:
Turn off radio, CellInfoListRate
Turn on IMS registration required
Turn on SMS over IMS
Turn on lte ram dump
SMSC:_____________ Update Refresh

snak1e said:
I didn't know about this menu. Thanks for that. I went into Phone Info and tried selecting LTE only but it didn't connect to anything. Not sure what that means. There are other
There are some other options in there for networks (e.g. TD-SCDMA, CDMA auto). Would any of them help picking up Sprint LTE?
Other options include:
Turn off radio, CellInfoListRate
Turn on IMS registration required
Turn on SMS over IMS
Turn on lte ram dump
SMSC:_____________ Update Refresh
Click to expand...
Click to collapse
KitKat roms are currently having data issues. You could try backing up your current KK rom and go back to Stock, update prl and backup your DNS settings then go back to your backed up KK rom and restore from the dns settings you backed up.

How does one downgrade from kitkat to jellybean? I tried to just flash a jellybean ROM with a clean install and got an error?
Sent from my SPH-L710 using Tapatalk

TheManiac said:
How does one downgrade from kitkat to jellybean? I tried to just flash a jellybean ROM with a clean install and got an error?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
What error ad you getting exactly?
Sent from my SPH-L710 using Tapatalk

djpabz23 said:
What error ad you getting exactly?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
It says something to do with missing a partition?
Sent from my SPH-L710 using Tapatalk

snak1e said:
I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!
Click to expand...
Click to collapse
ohhh i had this issue but i figured it out for pacman and most roms just download nova launcher and when you do create a shortcut on nova ad click on setting an it should say apn once there u open it and youll see where it says ehprd something like that click on it and go all the way to the bottom and change where it says bearer to ehrpd and lte should work ^_^

Ok so I finally got it working, although I'm not sure what was wrong with everything in the first place. My buddy said Cyanogenmod screwed up a recent ROM, so maybe that code was in one of the ROMs I was using.
Each time I flashed back to TouchWiz (I ended up using Wicked Sensations) I could get 4G/LTE. I ran a **72786*, did a PRL & profile update. Prior to finding a working ROM, when I went back to BeanStalk/PACMAN I would lose LTE. After I found the updated BeanStalk ROM I flashed and it still had LTE! Happy days!
At this point I was able to send MMS somehow, but phone was having problems being recognized by the network. I could connect to LTE but couldn't use the data. After I updated the APNs everything started working again.

snak1e said:
Ok so I finally got it working, although I'm not sure what was wrong with everything in the first place. My buddy said Cyanogenmod screwed up a recent ROM, so maybe that code was in one of the ROMs I was using.
Each time I flashed back to TouchWiz (I ended up using Wicked Sensations) I could get 4G/LTE. I ran a **72786*, did a PRL & profile update. Prior to finding a working ROM, when I went back to BeanStalk/PACMAN I would lose LTE. After I found the updated BeanStalk ROM I flashed and it still had LTE! Happy days!
At this point I was able to send MMS somehow, but phone was having problems being recognized by the network. I could connect to LTE but couldn't use the data. After I updated the APNs everything started working again.
Click to expand...
Click to collapse
How did you update your APN's?

try switching to philz touch recovery where it will give you 2 options....do clean to install a new rom.....if works....thks appreciated...safe flashing and live prosperous

djpabz23 said:
How did you update your APN's?
Click to expand...
Click to collapse
This should work http://forum.xda-developers.com/showthread.php?t=1794956

Mobile data not working +STOCK ROM

Hi everyone,
I have LG G3 d855 (Europe version). I bought it online, not at any network. I had an lollipop update really fast (Poland). Yesterday I rooted the phone, it worked fine, and installed the BlissPop rom. I missed the Quick Circle option though, so today I installed the ChupaChups rom for lollipop. And now my problem: The mobile data connection is not working. I can make calls, send texts, connect via wifi, but the data connection over the network is not working at all. I went back to stock - I downloaded and installed the European version using kdz method, it didn't help, so I did it over LG Flash Tool. It still does not work. Do you have any ideas, what to do with this? I feel like I'm going to cry, I'm very nervous about it, because I use mobile data almost all the time...
Maybe there's something wrong with the modem driver? I really hope someone is able to help me. Thank you in advance!
Edit: Maybe I used the wrong stock rom? I don't even have the option to update to lollipop anymore.

CaPlanePourMoi said:
Hi everyone,
I have LG G3 d855 (Europe version). I bought it online, not at any network. I had an lollipop update really fast (Poland). Yesterday I rooted the phone, it worked fine, and installed the BlissPop rom. I missed the Quick Circle option though, so today I installed the ChupaChups rom for lollipop. And now my problem: The mobile data connection is not working. I can make calls, send texts, connect via wifi, but the data connection over the network is not working at all. I went back to stock - I downloaded and installed the European version using kdz method, it didn't help, so I did it over LG Flash Tool. It still does not work. Do you have any ideas, what to do with this? I feel like I'm going to cry, I'm very nervous about it, because I use mobile data almost all the time...
Maybe there's something wrong with the modem driver? I really hope someone is able to help me. Thank you in advance!
Edit: Maybe I used the wrong stock rom? I don't even have the option to update to lollipop anymore.
Click to expand...
Click to collapse
Seems like a modem baseband was flashed somehow.
Flash the modem back to the correct stock version you had and it should fix the problem

tiguy99 said:
Seems like a modem baseband was flashed somehow.
Flash the modem back to the correct stock version you had and it should fix the problem
Click to expand...
Click to collapse
Do you know where I can find those modem drivers?
Edit: I checked which version of software I should use with my IMEI no. It's 20h. Would it be enough to flash the stock rom over kdz, or do I have to find somewhere the modem driver for this version? If yes, do you have any idea where can I find it?
Thanks.

CaPlanePourMoi said:
Do you know where I can find those modem drivers?
Edit: I checked which version of software I should use with my IMEI no. It's 20h. Would it be enough to flash the stock rom over kdz, or do I have to find somewhere the modem driver for this version? If yes, do you have any idea where can I find it?
Thanks.
Click to expand...
Click to collapse
Not sure.
I have the G2 and we have these files in our Development Section where you find ROM files etc.
Should be there as flashable zip files in the same section for the G3

tiguy99 said:
Not sure.
I have the G2 and we have these files in our Development Section where you find ROM files etc.
Should be there as flashable zip files in the same section for the G3
Click to expand...
Click to collapse
Ok, thanks! Last question before I do the final step - I have the ROM I am supposed to have. I rooted the phone, installed TWRP. I've also found the modem driver for my rom. And the question is - how should I flash the driver? Should I mount system or do anything apart from just installing the zip? Should I clear any cache?

@CaPlanePourMoi Wipe the modem partition in Recovery and then just flash the modem zip which will replace it. If that doesn't work, you can go back to BlissPop that includes it's own Modem and install Xposed for 5.1 Super-Alpha and the QuickCircle Mod for AOSP, all 3 of those I'm using with no issues whatsoever!

So I installed the modem driver (20h) yesterday, but it didn't help. I decided to install the BlissPop ROM, and mobile data (with LTE) works just fine. I will go back to the problem on Saturday and keep you up to date. Thanks!

Update
Update: Hey everyone - it seems like I didn't find any solution. I tried to go back to the ROM based on stock again (it was Cloudy this time), but the modem still didn't work. It was acutally working for a few seconds (I had 4G connection), but then again it was lost and it didn't connect anymore. Wifi works fine. Do you have any ideas on how I can flash the modem correctly? And how can I uninstall the modem that I have now in recovery? I didn't do that, because I cannot find this option.
Thanks in advance!

CaPlanePourMoi said:
Update: Hey everyone - it seems like I didn't find any solution. I tried to go back to the ROM based on stock again (it was Cloudy this time), but the modem still didn't work. It was acutally working for a few seconds (I had 4G connection), but then again it was lost and it didn't connect anymore. Wifi works fine. Do you have any ideas on how I can flash the modem correctly? And how can I uninstall the modem that I have now in recovery? I didn't do that, because I cannot find this option.
Thanks in advance!
Click to expand...
Click to collapse
I have a very similar issue
my LG G3 is the D855 on AT&T , and was working fine on Cloudy 2.2 or 2.3 Lolipop without any issues!
All of a sudden last Friday 5/22/2015, mobile data stopped working, but WiFi is still okay.
I just did a full wipe, updated APN, and the issue still there
I haven't change any major things in probably 2 months, not sure what's going on.
Finally, contacted AT&T, and made sure that they remove from the network,a put my back(troubleshooting). As well as changing the sim, and APN, but nothing worked!!
PLEASE HELP!!!!!!!!!!!!
UPDATE: So my last attempt, I contacted my provider AT&T, and they requested to try a default APN settings, even though what I used was working fine.
I did, and immediately my mobile data was back!!
Everything is working back as normal, and for some reason the network APN required updating

Did almost the same few days ago! I have finally solved my problem. Here's the explanation:
In Poland we had a network called "Era", a few years ago it was bought by T-Mobile. I searched the internet for T-Mobile APN settings in Poland and it didn't work. I have also found the APN settings for the old network, "Era" and surprisingly it's working. I don't know why T-Mobile settings don't work while they do for other people (and at this point I'm too afraid to ask. )

HI, i have the same problem on my d855 with wind (i'm in italy), i was rooted with custom rom and when i came back to stock i lose data connection. What i have to do? what do u mean for restore default apn? the default of my carrier? or the default for g3?