Related
Argh so I'm following these guides to the letter and I still can't get this to work.
I've got everything installed correctly , I change the Master address for the controller on my PC, everything goes fine up until I unplug the controller from the PC and hit the Power button on the controller for it to pair with my phone. all 4 lights just flash on the controller and eventually go off and do nothing. Now while that happens, the phone says "Client connected:1" like its suppose to. But the controller is not connected and will not do anything at all.
I than plug it back into the computer and it seems whenever I unplug it, the master change doesn't save and it goes back to its default BT address.
I'm assuming the problem is because the master won't stick OR that's just because the controller isn't connecting to the device so it resets itself to its last known use? Thing is, the controller is brand new and has never been used on a PS3 since I don't own one.
Anyone have any insight on this? Spent $35 for the controller and another $2 for the app and can't use it at the moment :/
NOTE: My phone is the sprint GSIII despite what my sig says due to build.prop changes
EDIT: the compatibility checker indicated its compatible.
Do I need a USB OTG cord to connect it for the controllers first time being synced to a device maybe? Don't have a ps3 to connect it to unfortunately.
little bump, i have no useful information other than i read there was a way to pair the 2 using only the phone, not sure where i saw it tho, maybe on a youtube video on setting up sixaxis?
Im very interested to see if this works, as i want very badly to play n64 and other games on my projector with the mhl adapter, instead of having to use the usb for the controller, i would try it but don't own a sixaxis controller atm.
I did it with the otg cable with out a pc took me a minute to get but it worked. so I unplugged it. It is now wireless so I tried to Play dead trigger and a couple of other games and the controls wouldn't work right I was able to control the phone from the ps3 controller but no games and with the controller plugged in via otg cable games worked great
Sent from my SGH-T999 using xda premium
I have the AT&T version but I am sure they both work the same way.
Make sure you grab the correct bluetooth address from your phone, says it at the bottom of the phone in the app.
Then download the drivers and sixaxis pair tool application on the PC, make sure they are installed! Grab your PS3 dualshock controller and connect it to your PC. It should go through installing the drivers/making sure you have them installed, once its complete your current controllers master will be shown at the top. You need to change it so that it reads the same as your mobile phones address.
Once that is complete go back to your phone, open up the program and start the driver, now hold the ps button until you see it sync, if it isn't syncing then you have a problem with the address of either your phone or controller.
Or...
You can actually make a cheap OTG cable yourself with stuff you probably have laying around the house. All you need is an USB extender cable and a micro USB cable, along with some wire and a soldering kit.
http://forum.xda-developers.com/showthread.php?t=1076767
When I used the app with my nexus s I had to use the computer tool, now with the galaxy all I had to do was plug it in with an otg cable, pair, and make sure you change the input method. Now I just start the app, press start on the app turn the controller on and it pairs instantly.
mastarifla said:
I have the AT&T version but I am sure they both work the same way.
Make sure you grab the correct bluetooth address from your phone, says it at the bottom of the phone in the app.
Then download the drivers and sixaxis pair tool application on the PC, make sure they are installed! Grab your PS3 dualshock controller and connect it to your PC. It should go through installing the drivers/making sure you have them installed, once its complete your current controllers master will be shown at the top. You need to change it so that it reads the same as your mobile phones address.
Once that is complete go back to your phone, open up the program and start the driver, now hold the ps button until you see it sync, if it isn't syncing then you have a problem with the address of either your phone or controller.
Or...
You can actually make a cheap OTG cable yourself with stuff you probably have laying around the house. All you need is an USB extender cable and a micro USB cable, along with some wire and a soldering kit.
http://forum.xda-developers.com/showthread.php?t=1076767
Click to expand...
Click to collapse
Yeah I got everything down but for some reason the controller isn't saving the master change. As soon as I unplug it from the PC after changing it, it goes right back to its default master. I continue to press the button on it anyway to pair with my phone and my phone said Client connected: 1 like its suppose to, but the controller lights just keep flashing another 5 seconds and it shuts off.
Assuming the master change isn't working. Tried both the new and old .exe's on the dev's site for the PC pair tool. :/
So if I get an OTG cord, I can do the initial pair with that and than it will pair wirelessly from there on out or I have to always use it with the cord that way?
Thanks guys.
Sent from my GT-I9000 using xda app-developers app
enjoy, skip to 3min mark, he also explains how to get the controller to work with games that don't have controller support
nonmindo said:
enjoy, skip to 3min mark, he also explains how to get the controller to work with games that don't have controller support
Click to expand...
Click to collapse
Isn't a valid link
EDIT: got the link to work after all, and god its so easy with a OTG cable... hahah. Guess that's my best bet since this thing keeps being so stubborn about saving the master change when I do it on the PC. -.-
Sent from my GT-I9000 using xda app-developers app
Ironically I tried the to pair the ps3 tool yesterday too.While the compatibility tester says it works yet I can't pair.I changed the Bluetooth address and installed the driver it just doesn't work.
Ironically I tried the to pair the ps3 tool yesterday too.While the compatibility tester says it works yet I can't pair.I changed the Bluetooth address and installed the driver it just doesn't work.
Click to expand...
Click to collapse
Ah sorry to hear that, glad I'm not alone though.. Overnighted a otg cable since I don't have the parts needed to make my own haha
Sent from my GT-I9000 using xda app-developers app
SemiGamer said:
Yeah I got everything down but for some reason the controller isn't saving the master change. As soon as I unplug it from the PC after changing it, it goes right back to its default master. I continue to press the button on it anyway to pair with my phone and my phone said Client connected: 1 like its suppose to, but the controller lights just keep flashing another 5 seconds and it shuts off.
Assuming the master change isn't working. Tried both the new and old .exe's on the dev's site for the PC pair tool. :/
So if I get an OTG cord, I can do the initial pair with that and than it will pair wirelessly from there on out or I have to always use it with the cord that way?
Thanks guys.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Have you tried using another PC program like MotionJoy? Downloading their drivers to see if you can change the master address with it instead? That would be my next suggestion if you are having issues with the master not sticking, obviously the best option would be to connect it to a PS3 first to make sure you at least have a default master.
If this doesn't work let me now, I'll try to think up some other ways before you have to purchase a cable to make it work.
mastarifla said:
Have you tried using another PC program like MotionJoy? Downloading their drivers to see if you can change the master address with it instead? That would be my next suggestion if you are having issues with the master not sticking, obviously the best option would be to connect it to a PS3 first to make sure you at least have a default master.
If this doesn't work let me now, I'll try to think up some other ways before you have to purchase a cable to make it work.
Click to expand...
Click to collapse
Yeah I tried motion joy and the controller works great wired to the computer (Works on the PC I mean) but I don't have a Bluetooth adapter for my PC to pair it with unfortunately.
Note that whenever I sync the controller to MotionJoy, I'm unable to use that USB port with SixaxisPairTool because MotionJoy drivers were installed with that port and motionjoy instantly picks it up and makes it unrecognizable to the sixaxistool program (Uninstalling motionjoy solves this) but just thought I'd throw it out there.
I clicked BluetoothPair in motionjoy and the BT address shows different than the one Sixaxistool shows, when I choose Custom Master or whatever it says and type in my phones, it "changes" it on the screen and says it changed, I than unplug it from the PC and start the app on the phone, Press the PS button on the controller and the 4 lights blink, the phone says Client connected:1, but the lights all keep blinking and than shut off. If pressed again the blink than turn off. I than connect it back to the PC and the BT address is shown as the default one from before I choose custom.
Pretty much the Change Master only stays while its connected to the PC, soon as I unplug it the master resets. I verified that by changing it, closing the programs (Both motionjoy and sixaxistool, at separate times of course during their own individual attempts) and than reopen either program and it shows what I changed it to still. But like I said as soon as the cord comes out it resets.
Sorry for the wall of text, just trying to provide as much info as I can. I ordered a cable but that can always come in handy anyway and I'd like to see if we could still solve this without one maybe to save some cash for anyone that has this problem in the future ya know!
Sent from my GT-I9000 using xda app-developers app
I know there was an issue with MotionJoy with having to put the address in "backwards" before it paired, I don't know if that was fixed or if that is still an issue. It's odd that it works fine when you plug it in to the PC but once you try wireless, it resets... I guess it's because you have yet to use the controller AS a bluetooth device, it has always been a wired connection. So you either have to pair it with a ps3, or with another bluetooth device.
Maybe you should just wait on the cable haha
mastarifla said:
I know there was an issue with MotionJoy with having to put the address in "backwards" before it paired, I don't know if that was fixed or if that is still an issue. It's odd that it works fine when you plug it in to the PC but once you try wireless, it resets... I guess it's because you have yet to use the controller AS a bluetooth device, it has always been a wired connection. So you either have to pair it with a ps3, or with another bluetooth device.
Maybe you should just wait on the cable haha
Click to expand...
Click to collapse
Hahah yeah I pulled enough of my hair out and gave in on the cord thanks for trying though! I agree its probably related to being a new unused controller.
Sent from my GT-I9000 using xda app-developers app
Argh okay got the cord. Controller works fine as a game pad. Works flawlessly on ShadowGun and Dead trigger which both have game pad function built in.
Can not get it to connect via Bluetooth still..
Tried exactly what the video showed and such.
Only thing I can think of is the controller could possibly be dead? Which I doubt because all the trouble shooting I've been doing (Connected to PC for an hour trying to get motion joy to go, connected to my phone the past 15min, I even plugged the USB into my wall adapter for my phone to see if it charged. Lights just blink than go off after like 5minutes. That mean its charged or what? Don't have a ps3, does it need one to charge? :/
Sent from my GT-I9000 using xda app-developers app
SemiGamer said:
Argh okay got the cord. Controller works fine as a game pad. Works flawlessly on ShadowGun and Dead trigger which both have game pad function built in.
Can not get it to connect via Bluetooth still..
Tried exactly what the video showed and such.
Only thing I can think of is the controller could possibly be dead? Which I doubt because all the trouble shooting I've been doing (Connected to PC for an hour trying to get motion joy to go, connected to my phone the past 15min, I even plugged the USB into my wall adapter for my phone to see if it charged. Lights just blink than go off after like 5minutes. That mean its charged or what? Don't have a ps3, does it need one to charge? :/
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Is this an OEM Sony Controller? Chinese fakes aren't going to work. Same thing with Wii remote clones.
kronium said:
Is this an OEM Sony Controller? Chinese fakes aren't going to work. Same thing with Wii remote clones.
Click to expand...
Click to collapse
I think its OEM? How would I go about checking?
It was this one:
www.amazon.com/gp/aw/d/B0015AARJI/ref=mp_s_a_1?qid=1341986008&sr=8-1
But it wasn't the Amazon seller by default when I got it, it was a seller named Wireovia, they've got 4.8 stars with 3559 ratings so I didn't really think much of them being fakes? Price was $39 though I don't see them in the list of sellers now, but they were default before.
Also the controller didn't come with a cord, is that a sign of a fake or is that the same with Sony's official?
Sent from my GT-I9000 using xda app-developers app
EDIT: Well crap. I was looking at "How to spot a fake" guides and they mention two definite ways of telling, one being the battery inside is different and another being there is no screw under the sticker on the back on the official, whereas the fakes have a screw under there.
Now mine has what looks to be a screw without a screwable head on it under the sticker. Maybe the new fakes have the head of the screws taken off because they knew it gave it away? Idk. Going to take it apart tomorrow and see the battery.
Anyone know if its possible to return an opened item? Purchased June 29th received it on July 3rd. It came with an amazon lable saying "Returning is easy, go to our website blah blah blah" but mentioned it being unopened. Hmm..
Call Amazon's 800 number and tell them this isn't a genuine controller, and is giving you pairing difficulties. You don't have to say what kind. Ha ha. You should get your money back no problem.
Can others on the Canadian gsiii variants download the Sixaxis app from the market? Play thinks it's not compatible with my device (d2can / rogers).
I remember from before this app had issues working on devices running sense or touchwiz ui and I had problems with it on my stock vibrant and sgs2 but it runs well on aosp based roms.so today I flashes aokp r3 and low and behold it works now! Played
Dead trigger flawlessly earlier.T-Mobile sgs3 btw.
Anyone tried to setup a controller on the tablet? I just purchased a moga power pro controller but I wa unable to set it up. It is workig fine with my S4 and the bluetooth works on the tablet becase I managed to connect the phone to the tablet via bluetooth.
Does anyone know how to setup the controller or becase it is a 3rd party device the access blocked?
shadow78 said:
Anyone tried to setup a controller on the tablet? I just purchased a moga power pro controller but I wa unable to set it up. It is workig fine with my S4 and the bluetooth works on the tablet becase I managed to connect the phone to the tablet via bluetooth.
Does anyone know how to setup the controller or becase it is a 3rd party device the access blocked?
Click to expand...
Click to collapse
Are you just trying to connect via bluetooth? I haven't done this in a long time (way back on my Xoom) but I thought you needed a 3rd party app and Root access to link them.
Someone confirm? Would love to play Soulcraft II - with a gamepad.
Ironcladz said:
Are you just trying to connect via bluetooth? I haven't done this in a long time (way back on my Xoom) but I thought you needed a 3rd party app and Root access to link them.
Someone confirm? Would love to play Soulcraft II - with a gamepad.
Click to expand...
Click to collapse
Moga has an app can be downloaded from the play store (moga pivot) and yes it uses bluetooth. This should work without root. If you google moga is a big name which should work on android 2.3 and above. I think the reason is samsung which is now blocking all 3rd part devices from 4.4.2 but I am not sure. I think the only option left is the samsung gamepad..
Not for $100 bucks. That's plain crazy
I use an OTG cable and PS4 controller.
HughesNet said:
I use an OTG cable and PS4 controller.
Click to expand...
Click to collapse
Any app needed to link them?
HughesNet said:
I use an OTG cable and PS4 controller.
Click to expand...
Click to collapse
Have you rooted? or the device just support it?
shadow78 said:
Have you rooted? or the device just support it?
Click to expand...
Click to collapse
It just supports it. Yes I have rooted but I have 3 Tab Pros as well that are not rooted and it works just fine on them as well. It also worked on my Tab S before I rooted. OTG is always supported on android devices.
HughesNet said:
It just supports it. Yes I have rooted but I have 3 Tab Pros as well that are not rooted and it works just fine on them as well. It also worked on my Tab S before I rooted. OTG is always supported on android devices.
Click to expand...
Click to collapse
Did you have to download any apps for button management?
I use my ps3 controller as gamepad with an adapter and it's working flawlessly. I've tested it with Dead Trigger 2 and Rayman Fiesta Run.
Sent from my GT-I9505G using XDA Premium 4 mobile app
If anyone gets a wired xbox controller to work, please let us know what you did. I was totally just hoping it was going to work and it doesn't. (at least for me). I just get a blinking light on the xbox controller. I have the 10.5.
I even rooted and installed USB/BT JoystickCenter Gold Demo but then that gets a 'can not get access to /dev/uinput error'
tahlsr said:
If anyone gets a wired xbox controller to work, please let us know what you did. I was totally just hoping it was going to work and it doesn't. (at least for me). I just get a blinking light on the xbox controller. I have the 10.5.
I even rooted and installed USB/BT JoystickCenter Gold Demo but then that gets a 'can not get access to /dev/uinput error'
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-skyhigh-tw-kernel-t2806563
Thanks so much for suggesting something but I'm too anxious to try it, since that thread says it's only for the SM-T700 (8.4") and I have the 10.5". He even specifically states it in post #3.
Kagdilag said:
try this http://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-skyhigh-tw-kernel-t2806563
Click to expand...
Click to collapse
Has anyone been able to get the sixaxis app working? I can't... I believe it has to do with a missing Samsung Bluetooth protocol in newer Samsung devices.
That was one of my main reasons for getting a tablet!
Not that it matters but I emailed Samsung support and their response: Thank you for contacting Samsung. I see that you would like to know whether Galaxy Tab S supports hooking up to a wired xbox USB controller. I do understand your concern and requirement. However, this Tablet does not support wired xbox USB controller. Unfortunately, as of now theere are no compatible controllers that use an USB OTG cable for this model from Samsung and Samsung does not have any tested results on using PS3 controller with the Tablet. I hope the above provided information address your concern.
controller recharges the tablet
is it possible to connect the controller (that has a battery pack) to the tablet and recharge the tablet?
eg. can a xbox one controller, that has a battery pack, be connected with an mhl cable/usb cable to a tablet and be used to charge the tablet? so the tablet is not drained while playing games.
(i asked this in the accessories forum too, apologies)
I use PS3 Controller wireless using Sixaxis Controller app.. For the first time setup need otg, but after pairing no need the otg . Can use wireless.
ayenzel said:
I use PS3 Controller wireless using Sixaxis Controller app.. For the first time setup need otg, but after pairing no need the otg . Can use wireless.
Click to expand...
Click to collapse
Thanks for the info! I just ordered an otg cable. Are you able to get two controllers working with the six axis app, or just one? My goal is to be able to use emulators with two Wireless PS3 controllers. Thanks!
maneetb said:
Thanks for the info! I just ordered an otg cable. Are you able to get two controllers working with the six axis app, or just one? My goal is to be able to use emulators with two Wireless PS3 controllers. Thanks!
Click to expand...
Click to collapse
if you have a computer , you can just plug the controller in and set the address for it .. no otg needed :good:
sku|| said:
if you have a computer , you can just plug the controller in and set the address for it .. no otg needed :good:
Click to expand...
Click to collapse
I tried that, but the Galaxy Tab won't find the controllers. I've set it up on multiple devices, but couldn't get it working on this one.
I read that the newer Samsung devices don't come with a Bluetooth protocol that is required for sixaxis to work... I hope I'm wrong!
Hallo everyone,
I'm new in this forum and I hope I am right here.
So the Fire TV is new in Germany and I preordered it.
It would be fine if I will be able to use my wireless Xbox 360 Controller with it.
I have read that it is possible to use the original wireless receiver for PC.
But what's about the remake from it (the version from China)? For PC I have to install the drivers manually.
Is it possible to use? Has somebody tried it?
For example like the "White PC USB Gaming Receiver Adapter White For Xbox 360 Wireless Controller" on amazon.com
Sorry I'm not allowed to post links.
Thanks!
McDin1988 said:
Hallo everyone,
I'm new in this forum and I hope I am right here.
So the Fire TV is new in Germany and I preordered it.
It would be fine if I will be able to use my wireless Xbox 360 Controller with it.
I have read that it is possible to use the original wireless receiver for PC.
But what's about the remake from it (the version from China)? For PC I have to install the drivers manually.
Is it possible to use? Has somebody tried it?
For example like the "White PC USB Gaming Receiver Adapter White For Xbox 360 Wireless Controller" on amazon.com
Sorry I'm not allowed to post links.
Thanks!
Click to expand...
Click to collapse
Hello
Yes, i have one from ebay (chinese clone) and it works fine. Lights in the controller doesn´t light up as usually but that happens with the official receiver also.
Hey,
I'm using a knockoff chinese receiver. I got mine on amazon for about 13 USD and it works great. It can be a little tricky to configure the controls with Mupen 64 or whatever emulator you are using, and the 'x' home key always takes you back to the games section of the kftv launcher (despite having xbmc set as the launcher, for example), but it works in game just fine.
Let me know if you have any questions- I'd be happy to help.
Can you connect more than one Controller on that adapter? I read, that 4 Controller + 4 headsets are possible with this adapter (on a PC). Whould be nice for multiplayer games...
Gesendet von meinem GT-I9295 mit Tapatalk
I haven't tried headsets, but I've used at least two controllers at once, and I also understand up to 4 per receiver works (theoretically more receivers = more players, but I'm not buying another one to test that theory).
How to hook up third party controllers correctly
I was searching the web up and down in order to get my third party controller (china) to work without a solution. Actually it was easier than I thought:
- connect the dongle
- restart the Fire TV (5 sec hold of Play+Big Button)
- press X on controller
The controller doesn't stop blinking but if you are able to navigate through menus everything worked well.
I bought this receiver from amazon (www (dot) ebay (dot) com/itm/271687378076?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) and it's not working when I plug it into the Fire TV. I believe the receiver works though because when I plugged it into my mac and I was able to see all the keys responding using 360Controller.
Everybody seems to have minimal issues connecting controllers to their Fire TV. Any ideas?
(Sorry, I don't have enough posts to post links.)
ilovexd said:
I bought this receiver from amazon (www (dot) ebay (dot) com/itm/271687378076?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) and it's not working when I plug it into the Fire TV. I believe the receiver works though because when I plugged it into my mac and I was able to see all the keys responding using 360Controller.
Everybody seems to have minimal issues connecting controllers to their Fire TV. Any ideas?
(Sorry, I don't have enough posts to post links.)
Click to expand...
Click to collapse
I'm sorry, but it'd be tough to replicate the issue without a device to test with. That receiver looks identical to the one I purchased, but I don't know if it is actually the same on the inside.
I don't know about on OSX, but I found that I could pair the xbox controller with the receiver on my windows PC (using the generic driver). Once I had paired on Windows, I could plug the adapter into anything running android and it would work just fine.
That's the first place I would start- try pairing a controller and making it work on a machine running Windows or OSX or whatever is 'supposed' to work. That way, you can at least tell if the hardware is bad. If you are able to pair and use it on one of those machines, plug it into your Fire TV and use the same controller and see if it recognizes it.
If it works on OSX or Windows but not on the Fire TV, I don't know what to tell you. Maybe pick up a USB OTG adapter and see if you can get it running on another android system. I haven't found a phone / tablet yet that hasn't been plug and play with the adapter.
Lastly, and this is unlikely, it could be that you are running a USB hub that isn't able to provide sufficient power. If that is the case, unplug all other USB devices and test it in the port. If it works there, the hub / draw of other devices is your problem. I'd recommend getting a powered USB hub in that case.
hotterpop said:
I'm sorry, but it'd be tough to replicate the issue without a device to test with. That receiver looks identical to the one I purchased, but I don't know if it is actually the same on the inside.
I don't know about on OSX, but I found that I could pair the xbox controller with the receiver on my windows PC (using the generic driver). Once I had paired on Windows, I could plug the adapter into anything running android and it would work just fine.
That's the first place I would start- try pairing a controller and making it work on a machine running Windows or OSX or whatever is 'supposed' to work. That way, you can at least tell if the hardware is bad. If you are able to pair and use it on one of those machines, plug it into your Fire TV and use the same controller and see if it recognizes it.
If it works on OSX or Windows but not on the Fire TV, I don't know what to tell you. Maybe pick up a USB OTG adapter and see if you can get it running on another android system. I haven't found a phone / tablet yet that hasn't been plug and play with the adapter.
Lastly, and this is unlikely, it could be that you are running a USB hub that isn't able to provide sufficient power. If that is the case, unplug all other USB devices and test it in the port. If it works there, the hub / draw of other devices is your problem. I'd recommend getting a powered USB hub in that case.
Click to expand...
Click to collapse
Thanks for the suggestions but I don't think the adapter will work with the Fire TV. I'm not using a hub anywhere in the setup.
I can pair the controller to a Windows machine using the adapter and the generic driver. I'm able to see the computer register all the inputs using the joy.cpl (app?) in Windows. When I plug the adapter into the Fire TV afterwards, I still can't control anything with the controller. Does the ADB debugging switch make a difference? I have the adb over usb set to OFF.
What's an USB OTG and where can I get one? What adapter did you pick up that worked? It might be better if I just picked up the same one instead of troubleshooting this one. Open to any other ideas though.
ilovexd said:
Thanks for the suggestions but I don't think the adapter will work with the Fire TV. I'm not using a hub anywhere in the setup.
I can pair the controller to a Windows machine using the adapter and the generic driver. I'm able to see the computer register all the inputs using the joy.cpl (app?) in Windows. When I plug the adapter into the Fire TV afterwards, I still can't control anything with the controller. Does the ADB debugging switch make a difference? I have the adb over usb set to OFF.
What's an USB OTG and where can I get one? What adapter did you pick up that worked? It might be better if I just picked up the same one instead of troubleshooting this one. Open to any other ideas though.
Click to expand...
Click to collapse
I'm still not convinced the device is not malfunctioning. Did you actually connect and use a controller to control the PC? It could be that the device is connecting and sending some information, but the part that actually connects to the controller is broken. On Windows, you can just download the driver and install it as per these instructions: https://krisrowland.wordpress.com/2...eless-controller-adapter-in-windows-7-64-bit/
I'm pretty sure this is the controller I bought. Like I said, it looks the same as yours. I'm confident you just got a bad unit.
I had one question:
-Does the rumble function work? (The vibration)
Greetings by Idijt
I_did_it_just_tmrrow said:
I had one question:
-Does the rumble function work? (The vibration)
Greetings by Idijt
Click to expand...
Click to collapse
It's been a while since I've actually used it, but if I remember right it does work if you map it properly in the emulator you are using. For example, Mupen 64 has support for rumble packs, and I'm about 80% certain it works.
hi mate did you ever get this working, i have the same issue, bought a cheap receiver from ebay. hooked it up to laptop, installed driver, worked fine. connect to fire tv, nothing!
ARGH!!!!
The cheap china clones just making problems with Android aka FireTV. That's what I heard.
But the original adapter makes me sometimes Problems too. Sometimes the Box Start in security Mode (grey written in the left corner of the screen) or had to replug them After Start to let the Box recognice the adapter again.
I bought two very great Bluetooth Controller from "mi". Really nice. Like Xbox 360 Controller. You can buy it cheap @ allbuy.com.
Greetings by Idijt
manikm303 said:
hi mate did you ever get this working, i have the same issue, bought a cheap receiver from ebay. hooked it up to laptop, installed driver, worked fine. connect to fire tv, nothing!
ARGH!!!!
Click to expand...
Click to collapse
I got it working!!!! Make sure all developer options are turned off in settings.
Hi there, I'm having the same issue here.
HARDWARE: - FireTV 2.0
- xbox 360 wireless chinadapter
- xbox 360 wireless controller
I've turned off the dev settings on my firetv, connected the 360 controller via my chinadapter to my pc to verify that it's paired and working. Plugged my adapter into my firetv. Restarted firetv. Pressed the silver X button, the blue x button, the ))) connect button... Still nothing. I've gone into the "Add a new controller" area (where it tries to establish connectivity) and tried everything I can think of. I was really excited about this and am kinda bummed. Not wanting to buy extra controllers really.
- something noone else has mentioned running into - the firetv seems to crash or reset itself when I push the ))) connect button on the chinadapter receiver. . . weird. . .
---------- Post added at 06:02 PM ---------- Previous post was at 05:18 PM ----------
UPDATE:
I got it to interact randomly. Unfortunately it was unacceptably buggy. Crashing games, not recognizing inputs and, well, everything that might be awful about a controller. So I guess I'm looking into cheap bluetooth controllers. def not spending $50 on Amazons controller to play freaking android games lol let alone games in the amazon app store. Thanks for the thread and any advice on getting it to work properly you may have discovered.
I am having the issue of not being able to connect my 360 controller via the Chinese adapter to the fire tv....I have got it working in windows but it wont connect on the fire tv. I have disabled developer options restarted the fire tv and hit the x button to try to connect but I get nothing.
I couldn't find any answers to this so I figured I would put out there for future users. I have tried to pair this controller with my Fire TV 2nd Gen with no success. Perhaps I am doing something wrong? Anyone gotten this to work? What did you do? I would get the Amazon gaming controller but they are unavailable for some reason. Thanks in advance.
bobless007 said:
I couldn't find any answers to this so I figured I would put out there for future users. I have tried to pair this controller with my Fire TV 2nd Gen with no success. Perhaps I am doing something wrong? Anyone gotten this to work? What did you do? I would get the Amazon gaming controller but they are unavailable for some reason. Thanks in advance.
Click to expand...
Click to collapse
Another user said that the Moga Portable doesnt work with the AFTV2 so dont think your Moga Pro will work ether? I have a thread on here which maybe of some use to you, seeing though you need a compatible controller for your AFTV2.
Look here - http://forum.xda-developers.com/fire-tv/help/aftv2-best-compatible-apps-accessories-t3269267
Hope this helps if so press that thanks button
bobless007 said:
I couldn't find any answers to this so I figured I would put out there for future users. I have tried to pair this controller with my Fire TV 2nd Gen with no success. Perhaps I am doing something wrong? Anyone gotten this to work? What did you do? I would get the Amazon gaming controller but they are unavailable for some reason. Thanks in advance.
Click to expand...
Click to collapse
If you have anything at all in the usb port when you you try to connect a moga pro under controllers in settings, the ftv doesnt see it, try to disconect anything usb and go into the settings and try again i have moga pro and the asus controller paired they both work well. You can re conect the usb devices after you are paired and it will work fine.
Thanks for that. I think the issue was I was charging it and trying to connect it at the same time. I unplugged the charging cable and it found it after a few seconds. Maybe the battery was too weak earlier. Anyway, works great now with Asphalt 8.
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Up. Anyone could test this with at least any Bluetooth controller? I heard that s10 had a similar issue and it got solved by an update.
Stanwar said:
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Click to expand...
Click to collapse
Most devices just don't have the keylayout files for controllers. Unfortunately, there's no easy way to make them work.
If you have magisk, there's a module called 1controller which you can just install to get that file.
If you don't, I also have the specific file you need to get into /system/etc/keylayout, but obviously, you're gonna need root for that.
I'm having the same problem too.
can you please upload a link
my gamesir g4 works fine
Stanwar said:
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Click to expand...
Click to collapse
The default connection via bluetooth using Playstation controllers doesnt work. Or it doesnt fully work at least. I have experienced it on my ps3 and PS4 controller. The only way a controller works is from a Bluetooth Controller made for Android. Or if you really want to use PS controller, you need an app called Sixaxis Controller.
If your phone is not rooted, the only way to do it is by using sixaxis and connect the PS controller directly via Wire. The sixaxis for the wired and wireless are different so dont buy it on the playstore right away
If you have rooted Access, then you can connect it wirelessly bia the sixaxis app.
Only then it will work as it should be.
The thing is, it actually works with my low-end tablet. So why not with this expensive phone?
Works fine with my Xbox One controller. Son uses it to play minecraft...
stillriza said:
Works fine with my Xbox One controller. Son uses it to play minecraft...
Click to expand...
Click to collapse
Wired or wireless?
Actually, after September update, I just tried to controller again and it's perfectly working through bluetooth.
Xbox One controller works fine via bluetooth, buttons are already mapped.
Stanwar said:
The thing is, it actually works with my low-end tablet. So why not with this expensive phone?
Click to expand...
Click to collapse
I dont know what tablet it is but it might be a feature of the tablet. Ps4 controllers have D-Input mapping while android works natively with X-input controllers. Xbox controllers work right away as it works under X-Input
Sixaxis converts that input to a readable input for the android if youll use a ps4 controller.
Edit: good that you had it working.