Develop Bugs

[Q] Stock recovery for 2.17.707.3??

Can anyone upload the stock recovery for 2.17.707.3 because I wanna go back to stock room and get the JB OTA. I know it's tiring ans wast of time but I find it the safest way for me

Here you go...
I just extracted it from the RUU for you.

Sentinel196 said:
Here you go...
I just extracted it from the RUU for you.
Click to expand...
Click to collapse
Thanks bro for your help, I appreciate it

DeboNZ said:
Can anyone upload the stock recovery for 2.17.707.3 because I wanna go back to stock room and get the JB OTA. I know it's tiring ans wast of time but I find it the safest way for me
Click to expand...
Click to collapse
Hi DeboNZ are you able to get JB OTA? I had flash the recovery attached here but I still couldn't flash the OTA (OTA is already available), at recovery mode, it running for a while then at 10%+ it show an error image (phone with exclamation mark).
Do I miss something? I didn't relock it since
http://forum.xda-developers.com/showthread.php?t=1670433
mention that we can do so without relock it.

You can update the phone with a unlocked bootloader, the rest has to be stock.
Stock rom
Stock kernel
Stock recovery
Did u remove some system apps or made changes to the system ?
That could also cause a problem !

MarcelHofs said:
You can update the phone with a unlocked bootloader, the rest has to be stock.
Stock rom
Stock kernel
Stock recovery
Did u remove some system apps or made changes to the system ?
That could also cause a problem !
Click to expand...
Click to collapse
I do delete some system apps come with One X Asia (like singtel app etc), but does that really stop the OTA from working??
Beside this I had downloaded
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
but this don't work for me too
my version-main: 2.17.707.3
Baseband: 2.1204.135.20
should exactly match

hoangyuh said:
I do delete some system apps come with One X Asia (like singtel app etc), but does that really stop the OTA from working??
Beside this I had downloaded
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
but this don't work for me too
my version-main: 2.17.707.3
Baseband: 2.1204.135.20
should exactly match
Click to expand...
Click to collapse
That could be the problem, and do you have a branded phone or not ? What CID do you have ? the versions match but is it the right one for your CID ?
The ruu did not work because
A : you have a branded phone and need a different ruu
B : you didn't RELOCK the bootloader before running the ruu

trumpo1 criterion
MarcelHofs said:
That could be the problem, and do you have a branded phone or not ? What CID do you have ? the versions match but is it the right one for your CID ?
The ruu did not work because
A : you have a branded phone and need a different ruu
B : you didn't RELOCK the bootloader before running the ruu
Click to expand...
Click to collapse
CID = HTC__044
and yes I didn't relock yet, perhaps I should try that? or any more alternative?
I only root it with SuperSU, so I assume i'm on
stock rom, basically I need to flash the stock kernel will do? (stock recovery done previously)

To run the RUU, you need only to relock the bootloader, put your device in fastboot mode and run the RUU. That's it, not necessary to flash back stock boot and recovery images.

I can RUU successfully, but now I couldn't get JB OTA, it keep saying Update is corrupted. Follow some recommended from other thread saying do a master reset but doesn't help. Anyone have better idea?

hoangyuh said:
I can RUU successfully, but now I couldn't get JB OTA, it keep saying Update is corrupted. Follow some recommended from other thread saying do a master reset but doesn't help. Anyone have better idea?
Click to expand...
Click to collapse
Is there a way to redownload the update ?

thanks to this thread, I successfully upgraded my unlocked and rooted one X to latest Jelly Bean over OTA update !!!!
just needed the stock recovery for 2.17.707.3 , and rootkeeper did the trick
thank you all !!!

Missing Firmware

Hey folks.
So I was running CM11 on my Rogers M8 for quite some time, until I decided to flash Sense based roms. Uh-oh, Wifi doesnt work anymore. Decided to do some digging, and realized that it's due to my older firmware which needs to be updated.
I followed the guides, and did the following to prepare:
Flashed stock recovery. I know it worked due to the triangle and explamation mark.
Relocked the bootloader through ADB commands.
Proceeded to ADB "fastboot getvar all" to see my current version.
That's when I saw that right next to the "version-main" it's empty. No numbers. Consequently, I haven't been able to flash any firmwares since it never passes any checks.
I am S-ON (firewater didnt work), CID is ROGER001, and completely exhausted. Please, help me figure this out.

yasha.sinitski said:
Hey folks.
So I was running CM11 on my Rogers M8 for quite some time, until I decided to flash Sense based roms. Uh-oh, Wifi doesnt work anymore. Decided to do some digging, and realized that it's due to my older firmware which needs to be updated.
I followed the guides, and did the following to prepare:
Flashed stock recovery. I know it worked due to the triangle and explamation mark.
Relocked the bootloader through ADB commands.
Proceeded to ADB "fastboot getvar all" to see my current version.
That's when I saw that right next to the "version-main" it's empty. No numbers. Consequently, I haven't been able to flash any firmwares since it never passes any checks.
I am S-ON (firewater didnt work), CID is ROGER001, and completely exhausted. Please, help me figure this out.
Click to expand...
Click to collapse
The Bootloader 3.18. tells you, you have 2.x firmware

So what is stopping me from flashing new firmware each time?

yasha.sinitski said:
So what is stopping me from flashing new firmware each time?
Click to expand...
Click to collapse
Not being SuperCID?
What do you mean each time?
You can flash stock firmware without going back to stock. As long as your MID and CID match.
Just download stock rogers firmware, rename and install it in hboot, or use RUU mode in fastboot.

xunholyx said:
Not being SuperCID?
What do you mean each time?
You can flash stock firmware without going back to stock. As long as your MID and CID match.
Just download stock rogers firmware, rename and install it in hboot, or use RUU mode in fastboot.
Click to expand...
Click to collapse
You see, I tried that. I downloaded stock rogers firmware, and ADB just spits out an error message saying that something doesnt match up. If I recall, it was error 12.

yasha.sinitski said:
You see, I tried that. I downloaded stock rogers firmware, and ADB just spits out an error message saying that something doesnt match up. If I recall, it was error 12.
Click to expand...
Click to collapse
It might be because you have a modified /system partition. Do you use Xposed?

xunholyx said:
It might be because you have a modified /system partition. Do you use Xposed?
Click to expand...
Click to collapse
No. My endgoal is to simply be running Roger's stock rom with full functionality. I just cant figure out how to get to that. I dont care about getting OTAs.

yasha.sinitski said:
No. My endgoal is to simply be running Roger's stock rom with full functionality. I just cant figure out how to get to that. I dont care about getting OTAs.
Click to expand...
Click to collapse
Here are all the files to download to go back to stock rogers. Download and zip them, then use TWRP to flash. Afterwards you will just have to install a stock recovery to be fully stock, but if you don't carte about OTAs, stick with TWRP. That way you can make nandroid backups.
EDIT: I'm mistaken here. You need them unzipped. PM sent.
For others with the same issue of returning to Canadian stock, go to this thread for links and a guide on how to do so.

xunholyx said:
Here are all the files to download to go back to stock rogers. Download and zip them, then use TWRP to flash. Afterwards you will just have to install a stock recovery to be fully stock, but if you don't carte about OTAs, stick with TWRP. That way you can make nandroid backups.
Click to expand...
Click to collapse
Are you going to post links? No matter what you do, I cant thank you enough for your help.

yasha.sinitski said:
Are you going to post links? No matter what you do, I cant thank you enough for your help.
Click to expand...
Click to collapse
Whoops!
Here ya go.

xunholyx said:
Whoops!
Here ya go.
Click to expand...
Click to collapse
Doing all that right now. I'll update how it goes.

yasha.sinitski said:
Doing all that right now. I'll update how it goes.
Click to expand...
Click to collapse
The getvar tell me, you are S-ON.
But you need S-OFF to flash a new firmware.
Otherwise you brick your phone.
That the firmware number is not showing is not critical i think. Its a symtom of some roms.
I flashed the newest firmware to my m7, number was showing. Then i flash Viper 7.0.1 and after that, my number is hidden.
But everything works, so i think its not critical.

Roma80 said:
The getvar tell me, you are S-ON.
But you need S-OFF to flash a new firmware.
Click to expand...
Click to collapse
Not true, you can flash the latest firmware if you're S-ON, the only "catch" is that it MUST be the correct MID and CID(That's in Firmware.zip) else it won't flash.
It's also the only way for an S-ON device to update it's Radio, as it won't be able to manually flash Radio's if it's not S-OFF.
Of course you need to relock your bootloader to do this with S-ON. So get stock recovery also, of course make backups of everything you need backed up as relocking it might erase all data.

BerndM14 said:
Not true, you can flash the latest firmware if you're S-ON, the only "catch" is that it MUST be the correct MID and CID(That's in Firmware.zip) else it won't flash.
It's also the only way for an S-ON device to update it's Radio, as it won't be able to manually flash Radio's if it's not S-OFF.
Of course you need to relock your bootloader to do this with S-ON. So get stock recovery also, of course make backups of everything you need backed up as relocking it might erase all data.
Click to expand...
Click to collapse
Oh okay, good to know.
I read wrong / missunderstood on other thread.

Roma80 said:
Oh okay, good to know.
I read wrong / missunderstood on other thread.
Click to expand...
Click to collapse
Yeah, Mike's guide has some good info. A lot of misinformation out there about some stuff.
He also has an excellent blog with plenty of info/resources if you're bored and what to read up on some stuff. Great site.
Android Revolution HD :good:

[Q] How to update hboot

To install CM12 on my One M8 it tells me that my hboot version is too old.
My current version is 3.16 and I need 3.18 or 3.19 any ideas on how I do that since i didn't find anything myself.

spitcuba said:
To install CM12 on my One M8 it tells me that my hboot version is too old.
My current version is 3.16 and I need 3.18 or 3.19 any ideas on how I do that since i didn't find anything myself.
Click to expand...
Click to collapse
your hboot is old you must be on a custom rom for a long time. Am I correct?
are you on s-off ?

Yes I have since I got the phone about half a year ago and I'm in s-on.

spitcuba said:
Yes I have since I got the phone about half a year ago and I'm in s-on.
Click to expand...
Click to collapse
I am also very interested to find the solution.
CM10 and 11 were running for month. S-ON.

spitcuba said:
To install CM12 on my One M8 it tells me that my hboot version is too old.
My current version is 3.16 and I need 3.18 or 3.19 any ideas on how I do that since i didn't find anything myself.
Click to expand...
Click to collapse
Since you are S-On you will have to go back to stock to take the OTAs to update your firmware (contains hboot). That means stock recovery and ROM, plus an unmodified system partition.
If you were to go S-Off, you could update the firmware manually.

Can you tell me if I need to be S-Off in order to flash back to stock because I don't really understand it in this thread: http://forum.xda-developers.com/showthread.php?t=2701376

@xunholyx
Thanks for reply, but how should it be possible to flash manually the rom with S-ON when I receive the message the I have to update hboot?
Is it possible to download the hboot as a .img?

thomaso said:
@xunholyx
Thanks for reply, but how should it be possible to flash manually the rom with S-ON when I receive the message the I have to update hboot?
Is it possible to download the hboot as a .img?
Click to expand...
Click to collapse
No you need to RESTORE a stock backup nandroid and fastboot flash the stock HTC recovery and then install the available ota's which will be notified inside the running OS

Mr Hofs said:
No you need to RESTORE a stock backup nandroid and fastboot flash the stock HTC recovery and then install the available ota's which will be notified inside the running OS
Click to expand...
Click to collapse
Thanks, but now I am gone.
Can you give me please a hint where I can find an instrucition for Restore of stock backup nandroid.
It is not clear for me what to do.

thomaso said:
Thanks, but now I am gone.
Can you give me please a hint where I can find an instrucition for Restore of stock backup nandroid.
It is not clear for me what to do.
Click to expand...
Click to collapse
As the link already been provided here.....
http://forum.xda-developers.com/showthread.php?t=2701376
Read it carefully....all of it (the 3 first posts)

spitcuba said:
Can you tell me if I need to be S-Off in order to flash back to stock because I don't really understand it in this thread: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
thomaso said:
@xunholyx
Thanks for reply, but how should it be possible to flash manually the rom with S-ON when I receive the message the I have to update hboot?
Is it possible to download the hboot as a .img?
Click to expand...
Click to collapse
You don't need to be S-Off to flash the backups. You just need the ones that match your CID and firmware/hboot.
You can find the 3.19 hboot .img files to flash with a simple google search (I just tried). Make sure that is the proper one for your model, and please realize that the hboot is a critical part of your phone and any corruption will brick your device.

xunholyx said:
Since you are S-On you will have to go back to stock to take the OTAs to update your firmware (contains hboot). That means stock recovery and ROM, plus an unmodified system partition.
If you were to go S-Off, you could update the firmware manually.
Click to expand...
Click to collapse
I'mS-off...could you please tell me how to update my firmware manually. My bootloader version is 3.16.0

steera said:
I'mS-off...could you please tell me how to update my firmware manually. My bootloader version is 3.16.0
Click to expand...
Click to collapse
Excellent guide, with downloads for many firmware versions (you didn't give any details about your phone) below. I personally always use Method #2:
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792

steera said:
I'mS-off...could you please tell me how to update my firmware manually. My bootloader version is 3.16.0
Click to expand...
Click to collapse
Hasn't been updated since it was rooted I see. And that was two years ago. That's a long time.
Hook up to your PC, get into ADB/fastboot, and enter the command fastboot getvar all. Remove your IMEI and serial# first (and MEID if you have one) because that is private info that you should never share on a public forum.
With the information from the getvar, I will be able to direct you on the proper firmware download.
Telling me the hboot version doesn't tell me enough to link you up. It does let me know however, that instructions on how to update aren't enough. You need direction on how to find the firmware for your particular model of M8.
I'll also give you instructions on how to flash the firmware.
You could also go to this thread instead, and learn on your own. It's all in the first couple of posts. It's very informative.
Of course you can post back here after if you have any questions about the process

[Q] EU M9 still says "software status:modified" after RUU

Hi all
i wanted to go fully stock on my M9 to get official OTA.
but after i flashed the 1.40.401.8 RUU it still says "software status: modified" in the bootloader.
so the question is; will it break OTA or is it just annoying looking at?
thanks in advance.

KasperHermansen said:
Hi all
i wanted to go fully stock on my M9 to get official OTA.
but after i flashed the 1.40.401.8 RUU it still says "software status: modified" in the bootloader.
so the question is; will it break OTA or is it just annoying looking at?
thanks in advance.
Click to expand...
Click to collapse
If you were soff then you could return to full stock, just unlocking the boot loader then relocking it will show the tempered flag, personally never wanted to go back to stock for an ota so not 100% as to whether it'll work, a fair few people have said returning to stock and then accepting the ota is a way to get the firmware upgraded so I assume that it's OK.
If its not then it'll just fail. Shouldn't break anything, ota should always leave a way back

KasperHermansen said:
Hi all
i wanted to go fully stock on my M9 to get official OTA.
but after i flashed the 1.40.401.8 RUU it still says "software status: modified" in the bootloader.
so the question is; will it break OTA or is it just annoying looking at?
thanks in advance.
Click to expand...
Click to collapse
I think you have to flash an untouched system image for your device to take OTA that way. Why not just run the RUU for the new software/firmware?

dladz said:
If you were soff then you could return to full stock, just unlocking the boot loader then relocking it will show the tempered flag, personally never wanted to go back to stock for an ota so not 100% as to whether it'll work, a fair few people have said returning to stock and then accepting the ota is a way to get the firmware upgraded so I assume that it's OK.
If its not then it'll just fail. Shouldn't break anything, ota should always leave a way back
Click to expand...
Click to collapse
so there is no going back to unmodified after i modified the software, without throwing 20$ at sunshine?

BUBBA DUB'S said:
I think you have to flash an untouched system image for your device to take OTA that way. Why not just run the RUU for the new software/firmware?
Click to expand...
Click to collapse
the newest RUU i can find is 1.40.401.8 and i already flashed that and it still says that its modified

KasperHermansen said:
the newest RUU i can find is 1.40.401.8 and i already flashed that and it still says that its modified
Click to expand...
Click to collapse
Oh ok gotcha, I know to go back to completely stock to get OTA you have to find untouched system image and change something's around in twrp. Check out post #3 in this thread and read FAQ's #8.
http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720

KasperHermansen said:
so there is no going back to unmodified after i modified the software, without throwing 20$ at sunshine?
Click to expand...
Click to collapse
nope...
it's $25, not $20...

jollywhitefoot said:
nope...
it's $25, not $20...
Click to expand...
Click to collapse
I though with twrp if you made a system image back up in "read only" you can flash that and stock recovery after making a few changes in twrp and be fine to take OTA.

BUBBA DUB'S said:
I though with twrp if you made a system image back up in "read only" you can flash that and stock recovery after making a few changes in twrp and be fine to take OTA.
Click to expand...
Click to collapse
That's correct. I wasn't disagreeing with anything. Just saying Sunshine S-Off is $25, not $20...unless it's been discounted since I did it.
But no matter what you do, once your device status in bootloader changes to modified, you can't change it back to "official" without s-off.

jollywhitefoot said:
That's correct. I wasn't disagreeing with anything. Just saying Sunshine S-Off is $25, not $20...unless it's been discounted since I did it.
But no matter what you do, once your device status in bootloader changes to modified, you can't change it back to "official" without s-off.
Click to expand...
Click to collapse
Lol gotcha yea I'm at work so I don't always completely read things. My bad.

BUBBA DUB'S said:
I though with twrp if you made a system image back up in "read only" you can flash that and stock recovery after making a few changes in twrp and be fine to take OTA.
Click to expand...
Click to collapse
That's what my understanding is too. After installing TWRP take stock backup before rooting. Then install backup before taking OTA. One question though. SuperSU has an option to remove root. Will have to try this on the next OTA.

BUBBA DUB'S said:
Lol gotcha yea I'm at work so I don't always completely read things. My bad.
Click to expand...
Click to collapse
LOL. Who has time to read these days???
Flash first...then ask cryptic questions...find an outdated M8 youtube video or skim some old M7 tutorials...worst case scenario is to read and understand. (BTW, this is not directed at you...your post just made me think of the typical non-reading user)

KasperHermansen said:
so there is no going back to unmodified after i modified the software, without throwing 20$ at sunshine?
Click to expand...
Click to collapse
No there isn't. Soff, you will have been down this prior to unlocking
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
jollywhitefoot said:
That's correct. I wasn't disagreeing with anything. Just saying Sunshine S-Off is $25, not $20...unless it's been discounted since I did it.
But no matter what you do, once your device status in bootloader changes to modified, you can't change it back to "official" without s-off.
Click to expand...
Click to collapse
Still 25

To return to official status instead of modified simply run the RUU.zip using the 0PJAIMG.ZIP method
rename the RUU.zip to 0PJAIMG.ZIP, place it on a ext sd card formatted in FAT32 (a 16 or 32gig one should work), reboot into DOWNLOAD_MODE, agree and it should flash.
Click to expand...
Click to collapse
With s-off it will not change back to modified again
you can read all about it here >> http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882

clsA said:
To return to official status instead of modified simply run the RUU.zip using the 0PJAIMG.ZIP method
With s-off it will not change back to modified again
you can read all about it here >> http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882
Click to expand...
Click to collapse
After it's relocked, it'll still say tampered.

Sorry to bother, could someone help me please? http://forum.xda-developers.com/one-m9/help/conversion-to-developer-edition-t3151596
Thanks!

dladz said:
After it's relocked, it'll still say tampered.
Click to expand...
Click to collapse
m9 do not say tampered - they say Official or Modified
as far as I know the 0PJAIMG.ZIP method works on s-on also ... (never tried it though)

clsA said:
m9 do not say tampered - they say Official or Modified
as far as I know the 0PJAIMG.ZIP method works on s-on also ... (never tried it though)
Click to expand...
Click to collapse
Sorry I meant modified
I've never had to do it, but what would be the point of it if you could just flash that zip and you're back to stock?

dladz said:
Sorry I meant modified
I've never had to do it, but what would be the point of it if you could just flash that zip and you're back to stock?
Click to expand...
Click to collapse
I don't understand your question "what would be the point of it if you could just flash that zip and you're back to stock?"
if you use the 0PJAIMG.ZIP flash method it resets the phone to Official (isn't that what this thread is about ?)
with s-on the 0PJAIMG.ZIP would have to be your current firmware version or newer (you need s-off to go backwards)
this is all in theory as I have never flashed the 0PJAIMG.ZIP with s-on but it should work
OMJ describes using it with s-on here >> http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
Those are Sprint files but the method is the same

clsA said:
I don't understand your question "what would be the point of it if you could just flash that zip and you're back to stock?"
if you use the 0PJAIMG.ZIP flash method it resets the phone to Official (isn't that what this thread is about ?)
with s-on the 0PJAIMG.ZIP would have to be your current firmware version or newer (you need s-off to go backwards)
this is all in theory as I have never flashed the 0PJAIMG.ZIP with s-on but it should work
OMJ describes using it with s-on here >> http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
Those are Sprint files but the method is the same
Click to expand...
Click to collapse
I don't think they'll work. It'll still say modified.

S-ON

Hello everybody! I have m9 with unlocked bootloader, s-off, stock recovery and not rooted. Atm i have a problem with manual ota 5.1 installation via stock recovery (Status 7). That very strange because 5.0.1 nad 5.0.2 updates was installed successfully without any manipulations and accessing recovery. Maybe return to s-on and locking bootloader will solve this problem? How can i get s-on? And can i get it without full wipe?

Your problem is not being s-off, so forget that. S-off should be viewed as a one-way trip.
What exactly is the error you're getting?

iElvis said:
Your problem is not being s-off, so forget that. S-off should be viewed as a one-way trip.
What exactly is the error you're getting?
Click to expand...
Click to collapse
I thought that installation problem is related to some modifications. All i've done are bootloader unlock, s-off and cid changing.
Ok i'll try to describe error message.

Photo of screen with instalaltion messages
https://drive.google.com/file/d/1S_r57y8a_0e49IN5ZfxRK4twhe1XQFXL0A/view?usp=sharing
Atm i have 5.0.2, Soft 1.32.401.17

OTA_HIMA_UHL_L51_SENSE70_MR_HTC_Europe_2.10.401.1-1.40.401.8_release_444119 - name of OTA update. Maybe problem in soft versions? 2.10.401.1-1.40.401.8, but i have in stock 1.32.401.17

Corrupt file..
You have to delete the current file its trying to install and redownload the ota or update file on your phone and try again
Sent from my HTC One M9 using XDA Free mobile app
---------- Post added at 08:01 PM ---------- Previous post was at 07:59 PM ----------
The file is in the data/media/download on the phone ( in your error message )
Sent from my HTC One M9 using XDA Free mobile app

Have flashed 1.40.401.8 but ota still get status 7 error when try to update through recovery. Btw have some question about firmware flashing... After fw flashing i've got 1.40.401.8 in fastboot mode of phone, but in started android current version of software is still 1.32.401.17. It's normal or something goes wrong?

matthewstice said:
Corrupt file..
You have to delete the current file its trying to install and redownload the ota or update file on your phone and try again
Sent from my HTC One M9 using XDA Free mobile app
---------- Post added at 08:01 PM ---------- Previous post was at 07:59 PM ----------
The file is in the data/media/download on the phone ( in your error message )
Sent from my HTC One M9 using XDA Free mobile app
Click to expand...
Click to collapse
Still status 7

Go into Settings>Developer Options and tick "Allow OEM unlocking" then try it all again.

iElvis said:
Go into Settings>Developer Options and tick "Allow OEM unlocking" then try it all again.
Click to expand...
Click to collapse
Maybe that sounds strange, but i have no such option in dev menu

New point in my story! After trying to flash ota by TWRP i've got new error description!
https://drive.google.com/file/d/1GNJPmCkc4RNPeMeb3lLpaVbL80NQnP0wyg/view?usp=sharing
This package is for "htc_himauhl" devices; this is "htc_himaul".

Severusnt said:
New point in my story! After trying to flash ota by TWRP i've got new error description!
https://drive.google.com/file/d/1GNJPmCkc4RNPeMeb3lLpaVbL80NQnP0wyg/view?usp=sharing
This package is for "htc_himauhl" devices; this is "htc_himaul".
Click to expand...
Click to collapse
You not update OTA by TWRP (must be a stock recovery)
Severusnt said:
OTA_HIMA_UHL_L51_SENSE70_MR_HTC_Europe_2.10.401.1-1.40.401.8_release_444119 - name of OTA update. Maybe problem in soft versions? 2.10.401.1-1.40.401.8, but i have in stock 1.32.401.17
Click to expand...
Click to collapse
Your problem is system version
You can not upgrade the system to 2.10.401.1 if your current system version 1.32.401.17 ... OTA has to be in sequence
So, first OTA to 1.40.401.8 (the whole system) and then to 2.10.401.1

Mutasek24 said:
You not update OTA by TWRP (must be a stock recovery)
Your problem is system version
You can not upgrade the system to 2.10.401.1 if your current system version 1.32.401.17 ... OTA has to be in sequence
So, first OTA to 1.40.401.8 (the whole system) and then to 2.10.401.1
Click to expand...
Click to collapse
Can't find ota from 1.32.401.17 to 1.40.401.8

Severusnt said:
Can't find ota from 1.32.401.17 to 1.40.401.8
Click to expand...
Click to collapse
I do not know whether it was released OTA with 1.32.401.17 to 1.40.401.8, you checked the settings / about / software updates?

Mutasek24 said:
I do not know whether it was released OTA with 1.32.401.17 to 1.40.401.8, you checked the settings / about / software updates?
Click to expand...
Click to collapse
Alrady checked a lot of times. No updates avaliable atm All i found is ota from 1.32.401.15-1.40.401.8, but not 1.32.401.17

Severusnt said:
Have flashed 1.40.401.8 but ota still get status 7 error when try to update through recovery. Btw have some question about firmware flashing... After fw flashing i've got 1.40.401.8 in fastboot mode of phone, but in started android current version of software is still 1.32.401.17. It's normal or something goes wrong?
Click to expand...
Click to collapse
are flashing firmware separately??
If I understand correctly, you have unlocked bootloader and are S-OFF. If yes, then you could flash the combined_no_wipe 2.10.401.1 firmware from here http://forum.xda-developers.com/one-m9/development/firmware-t3068243
then restore the untouched 2.10.401.1 stock-system ROM from here:
http://forum.xda-developers.com/showpost.php?p=62661172&postcount=470
then you'll be on stock 2.10.401.1
PS: do not lock bootloader, and do not ever go S-ON

ok buddy your problem is not soff at all, the problem is you need to re-lock bootloader so ota can apply, must be phone, unrooted, re-locked with stock rom, so..............
flash any stock rom with the sd card method since you are soff, reboot in download mode, place dev ruu on sdcard root and flash it, you will loose everything.
(http://forum.xda-developers.com/att-one-m9/general/att-developer-edition-ruu-how-to-t3086948)
do not flash any recovery/superuser stufff, it will break phone again.
relock bootloader, reset phone.
(http://forum.xda-developers.com/one-m9/general/how-to-lock-unlock-bootloader-htcdevs-t3092036)
download ota and apply.
--> latest update on dev edition has already the latest firmware 2.11 go for this with no ota at all.

LLegion said:
ok buddy your problem is not soff at all, the problem is you need to re-lock bootloader so ota can apply
Click to expand...
Click to collapse
OTA works just fine with an unlocked bootloader

Just reviewed that shot of your errors, nkk71 is correct, otas are incremental and you're flashing them out of sequence.
Since you're s-off, the safest thing here is simply to upgrade manually as stated. These workarounds to get otas to flash are for the guys who are s-on. You don't need to do any of this stuff.

iElvis said:
Just reviewed that shot of your errors, nkk71 is correct, otas are incremental and you're flashing them out of sequence.
Since you're s-off, the safest thing here is simply to upgrade manually as stated. These workarounds to get otas to flash are for the guys who are s-on. You don't need to do any of this stuff.
Click to expand...
Click to collapse
totally agrre with you man! he should flash from sd card the newest 2.11 stock rom and that would be all.