Missing Firmware - One (M8) Q&A, Help & Troubleshooting

Hey folks.
So I was running CM11 on my Rogers M8 for quite some time, until I decided to flash Sense based roms. Uh-oh, Wifi doesnt work anymore. Decided to do some digging, and realized that it's due to my older firmware which needs to be updated.
I followed the guides, and did the following to prepare:
Flashed stock recovery. I know it worked due to the triangle and explamation mark.
Relocked the bootloader through ADB commands.
Proceeded to ADB "fastboot getvar all" to see my current version.
That's when I saw that right next to the "version-main" it's empty. No numbers. Consequently, I haven't been able to flash any firmwares since it never passes any checks.
I am S-ON (firewater didnt work), CID is ROGER001, and completely exhausted. Please, help me figure this out.

yasha.sinitski said:
Hey folks.
So I was running CM11 on my Rogers M8 for quite some time, until I decided to flash Sense based roms. Uh-oh, Wifi doesnt work anymore. Decided to do some digging, and realized that it's due to my older firmware which needs to be updated.
I followed the guides, and did the following to prepare:
Flashed stock recovery. I know it worked due to the triangle and explamation mark.
Relocked the bootloader through ADB commands.
Proceeded to ADB "fastboot getvar all" to see my current version.
That's when I saw that right next to the "version-main" it's empty. No numbers. Consequently, I haven't been able to flash any firmwares since it never passes any checks.
I am S-ON (firewater didnt work), CID is ROGER001, and completely exhausted. Please, help me figure this out.
Click to expand...
Click to collapse
The Bootloader 3.18. tells you, you have 2.x firmware

So what is stopping me from flashing new firmware each time?

yasha.sinitski said:
So what is stopping me from flashing new firmware each time?
Click to expand...
Click to collapse
Not being SuperCID?
What do you mean each time?
You can flash stock firmware without going back to stock. As long as your MID and CID match.
Just download stock rogers firmware, rename and install it in hboot, or use RUU mode in fastboot.

xunholyx said:
Not being SuperCID?
What do you mean each time?
You can flash stock firmware without going back to stock. As long as your MID and CID match.
Just download stock rogers firmware, rename and install it in hboot, or use RUU mode in fastboot.
Click to expand...
Click to collapse
You see, I tried that. I downloaded stock rogers firmware, and ADB just spits out an error message saying that something doesnt match up. If I recall, it was error 12.

yasha.sinitski said:
You see, I tried that. I downloaded stock rogers firmware, and ADB just spits out an error message saying that something doesnt match up. If I recall, it was error 12.
Click to expand...
Click to collapse
It might be because you have a modified /system partition. Do you use Xposed?

xunholyx said:
It might be because you have a modified /system partition. Do you use Xposed?
Click to expand...
Click to collapse
No. My endgoal is to simply be running Roger's stock rom with full functionality. I just cant figure out how to get to that. I dont care about getting OTAs.

yasha.sinitski said:
No. My endgoal is to simply be running Roger's stock rom with full functionality. I just cant figure out how to get to that. I dont care about getting OTAs.
Click to expand...
Click to collapse
Here are all the files to download to go back to stock rogers. Download and zip them, then use TWRP to flash. Afterwards you will just have to install a stock recovery to be fully stock, but if you don't carte about OTAs, stick with TWRP. That way you can make nandroid backups.
EDIT: I'm mistaken here. You need them unzipped. PM sent.
For others with the same issue of returning to Canadian stock, go to this thread for links and a guide on how to do so.

xunholyx said:
Here are all the files to download to go back to stock rogers. Download and zip them, then use TWRP to flash. Afterwards you will just have to install a stock recovery to be fully stock, but if you don't carte about OTAs, stick with TWRP. That way you can make nandroid backups.
Click to expand...
Click to collapse
Are you going to post links? No matter what you do, I cant thank you enough for your help.

yasha.sinitski said:
Are you going to post links? No matter what you do, I cant thank you enough for your help.
Click to expand...
Click to collapse
Whoops!
Here ya go.

xunholyx said:
Whoops!
Here ya go.
Click to expand...
Click to collapse
Doing all that right now. I'll update how it goes.

yasha.sinitski said:
Doing all that right now. I'll update how it goes.
Click to expand...
Click to collapse
The getvar tell me, you are S-ON.
But you need S-OFF to flash a new firmware.
Otherwise you brick your phone.
That the firmware number is not showing is not critical i think. Its a symtom of some roms.
I flashed the newest firmware to my m7, number was showing. Then i flash Viper 7.0.1 and after that, my number is hidden.
But everything works, so i think its not critical.

Roma80 said:
The getvar tell me, you are S-ON.
But you need S-OFF to flash a new firmware.
Click to expand...
Click to collapse
Not true, you can flash the latest firmware if you're S-ON, the only "catch" is that it MUST be the correct MID and CID(That's in Firmware.zip) else it won't flash.
It's also the only way for an S-ON device to update it's Radio, as it won't be able to manually flash Radio's if it's not S-OFF.
Of course you need to relock your bootloader to do this with S-ON. So get stock recovery also, of course make backups of everything you need backed up as relocking it might erase all data.

BerndM14 said:
Not true, you can flash the latest firmware if you're S-ON, the only "catch" is that it MUST be the correct MID and CID(That's in Firmware.zip) else it won't flash.
It's also the only way for an S-ON device to update it's Radio, as it won't be able to manually flash Radio's if it's not S-OFF.
Of course you need to relock your bootloader to do this with S-ON. So get stock recovery also, of course make backups of everything you need backed up as relocking it might erase all data.
Click to expand...
Click to collapse
Oh okay, good to know.
I read wrong / missunderstood on other thread.

Roma80 said:
Oh okay, good to know.
I read wrong / missunderstood on other thread.
Click to expand...
Click to collapse
Yeah, Mike's guide has some good info. A lot of misinformation out there about some stuff.
He also has an excellent blog with plenty of info/resources if you're bored and what to read up on some stuff. Great site.
Android Revolution HD :good:

Related

JB Installation Problems

Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
blankfile99 said:
Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
Click to expand...
Click to collapse
you installed an OTA?
I'm using a Stock from a recovery Nandroid, not mine but the same CID 044... I guess I shold go back to RUU...but I've tried without any success
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
blankfile99 said:
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
Click to expand...
Click to collapse
you are on JB now and you can't run ICS RUUs, you can't downgrade...
matt95 said:
you are on JB now and you can't run ICS RUUs, you can't downgrade...
Click to expand...
Click to collapse
I'm not...I'm on 2.17 yet...JB update does not install...that's the main problem
and I have noticed that NO MATTER I CHANGE...IT WONT CHANGE THIS VERSION... OMG
tks man!
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Sentinel196 said:
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Click to expand...
Click to collapse
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Also, this may sound silly but did you reflash stock RECOVERY?
blankfile99 said:
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Click to expand...
Click to collapse
No worries, let us know how you go, and don't forget the Thanks button.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Well I am currently running Team Venom's Viper but I have HBOOT 1.31. My device's CID is HTC_J15.
I have checked the list of RUUs but unfortunately all of them are older than the version I need, which has to be 3+.
Does anybody know if there's an RUU available for my device? It is an ubranded WWE version, 401 if I remember correctly.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
I'm using the same as the NANDROID, taken from it...right?
Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
That's all I need... I'll give my feedback later.
Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
In my experience the 2.17.707.xx RUU Asia WWE does not work properly. It does its thing installing everything, relocks the bootloader but somehow it does not reflash the recovery. After 4 hours trying everything under the sun, I gave up and looked for a nandroid of 2.17 for CID_044 and restored from that, reflashed stock recovery and went to town with the OTA.
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Refer custom to stock thread posted earlier. Go through step by step procedure. It will help u to be on stock Rom. After that flash any Rom suitable to your CID only
http://forum.xda-developers.com/showthread.php?t=1859714
Hit Thanks if u like.
Sent from my HTC One X using xda app-developers app
Got It guys!!
What I did... NOTHING else...
Only Reboot the phone...wait to initialize completely, then reboot again, when came a little update about 1.25mb...installed and reboot...after that...JB update installed correctly.
If someone else needs...Someone like me who relocked the phone waiting for JB and Has problems
1. Unlock Phone
2. fastboot flash recovery recovery.img (from nandroid 2.17)
3. fastboot flash boot boot.img (from nandroid 2.17)
4. fastboot erase cache
5. restart bootloader (I like to do this way)
6. Install RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed on windows
7. Wait to boot completely, then restart phone.
8. Update Software ...a little update came before JB. (about 1.25mb)
9 Reboot phone.
10. Update Software... finally to JB.
Thanks guys!
Sentinel196 said:
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Click to expand...
Click to collapse
The RUU ran with no problem, and it relocked my bootloader, but it still did not receive any OTAs. So I had no choice but to do a nandroid restore instead (recommended anyway )

Help with s-off and unbranding

Hi everyone ,
Here is my problem, I bought a french htc one m8 with orange carrier, I unlocked my bootloader and installed phil's touch recovery and then I flashed skydragon rom 4.4.2 with htc sense 6 but now I would like to flash the last skydragon lollipop but here's my problem , I can't go s-off with this rom so I can't update my firmware or change my CID, so I can't install lollipop rom without wifi's problem. I would like to know how can I do to update my firmware to 4.4.4 cause I tried to s-off with firewater but doesn't work too.
Anyone have a solution would be a god to me ^^
Thanks in advance.
blop135 said:
Hi everyone ,
Here is my problem, I bought a french htc one m8 with orange carrier, I unlocked my bootloader and installed phil's touch recovery and then I flashed skydragon rom 4.4.2 with htc sense 6 but now I would like to flash the last skydragon lollipop but here's my problem , I can't go s-off with this rom so I can't update my firmware or change my CID, so I can't install lollipop rom without wifi's problem. I would like to know how can I do to update my firmware to 4.4.4 cause I tried to s-off with firewater but doesn't work too.
Anyone have a solution would be a god to me ^^
Thanks in advance.
Click to expand...
Click to collapse
Firewater doesn't work anymore. HTC patched the exploit.
You'll have to use SunShine S-Off. It costs $25, but is guaranteed to work or you don't pay.
Having S-Off is totally worth $25 IMO.
Here's a link to their website.
xunholyx said:
Firewater doesn't work anymore. HTC patched the exploit.
You'll have to use SunShine S-Off. It costs $25, but is guaranteed to work or you don't pay.
Having S-Off is totally worth $25 IMO.
Here's a link to their website.
Click to expand...
Click to collapse
I tried but it didn't work , it told me I've got to be on a stock rom :/
blop135 said:
I tried but it didn't work , it told me I've got to be on a stock rom :/
Click to expand...
Click to collapse
Go to this thread. It has a collection of stock backups you can falsh to get back your stock ROM.
It also has a collection of stock recoveries to flash with ADB if you need that.
All the instructions are there.
xunholyx said:
Go to this thread. It has a collection of stock backups you can falsh to get back your stock ROM.
It also has a collection of stock recoveries to flash with ADB if you need that.
All the instructions are there.
Click to expand...
Click to collapse
OK thanks a lot , the number before every rom is my firmware right? So I've got to download the one with my number on it ?
blop135 said:
OK thanks a lot , the number before every rom is my firmware right? So I've got to download the one with my number on it ?
Click to expand...
Click to collapse
Firmware is something separate. That link will get you back to stock ROM. Then use Sunshine to s off. After that, you can update your firmware.
xunholyx said:
Firmware is something separate. That link will get you back to stock ROM. Then use Sunshine to s off. After that, you can update your firmware.
Click to expand...
Click to collapse
Ok I'll try this but I need to find the good stock recovery ? Sorry for my noob questions ^^
blop135 said:
Ok I'll try this but I need to find the good stock recovery ? Sorry for my noob questions ^^
Click to expand...
Click to collapse
The stock recoveries or in that link too. I'm not sure if you need them for sunshine though. Try with custom recovery, if that doesn't work, get a stock recovery.
Or get both ROM and recovery stock, then reflash a custom recovery and ROM.
If you get both to stock, you shouldn't have any issues.
xunholyx said:
Firewater doesn't work anymore. HTC patched the exploit.
You'll have to use SunShine S-Off. It costs $25, but is guaranteed to work or you don't pay.
Having S-Off is totally worth $25 IMO.
Here's a link to their website.
Click to expand...
Click to collapse
How did HTC patch the exploit?
xunholyx said:
The stock recoveries or in that link too. I'm not sure if you need them for sunshine though. Try with custom recovery, if that doesn't work, get a stock recovery.
Or get both ROM and recovery stock, then reflash a custom recovery and ROM.
If you get both to stock, you shouldn't have any issues.
Click to expand...
Click to collapse
OK I'll try this, Thanks you very much
passion4tech said:
How did HTC patch the exploit?
Click to expand...
Click to collapse
Firmware updates. If you have one fresh out of the box, Firewater would probably still work. And still does for some.
xunholyx said:
The stock recoveries or in that link too. I'm not sure if you need them for sunshine though. Try with custom recovery, if that doesn't work, get a stock recovery.
Or get both ROM and recovery stock, then reflash a custom recovery and ROM.
If you get both to stock, you shouldn't have any issues.
Click to expand...
Click to collapse
Ok so now when I try to flash the offical carrier rom with phil's touch recovery , there is an android on the back with a red triangle and it says installation aborted
blop135 said:
Ok so now when I try to flash the offical carrier rom with phil's touch recovery , there is an android on the back with a red triangle and it says installation aborted
Click to expand...
Click to collapse
First, I misunderstood your earlier question. Yes the number in front of the backups are for firmware.
To help you more, I'll need some information. Hook up your phone to your computer and start ADB. Then issue these commands:
adb reboot fastboot (wait till your phone boots into fastboot)
fastboot getvar all
Then post what the readout says here, but edit out your serial number (serialno) and IMEI for your own safety.
Then I'll be able to give you a little more guidance.
xunholyx said:
First, I misunderstood your earlier question. Yes the number in front of the backups are for firmware.
To help you more, I'll need some information. Hook up your phone to your computer and start ADB. Then issue these commands:
adb reboot fastboot (wait till your phone boots into fastboot)
fastboot getvar all
Then post what the readout says here, but edit out your serial number (serialno) and IMEI for your own safety.
Then I'll be able to give you a little more guidance.
Click to expand...
Click to collapse
Here it is
http://imageshack.com/a/img537/3226/6mu7TC.png
blop135 said:
Here it is
http://imageshack.com/a/img537/3226/6mu7TC.png
Click to expand...
Click to collapse
Your CID is ORANG202 and your firmware is 1.54.73.5, so you will need the backup that corresponds with that.
The backup available was made with TWRP recovery. So you'll need that. (In my opinion, TWRP is a better recovery, less issues)
You could go to their website to download it and get instructions on how to flash it, but there is a much easier way.
Go to the Play Store and install an app called TWRP Manager. Hit the three line menu thingy on the top left, and pick "Install TWRP".
After that go back to the stock backup thread and flash the backup that matches your CID and firmware.
xunholyx said:
Your CID is ORANG202 and your firmware is 1.54.73.5, so you will need the backup that corresponds with that.
The backup available was made with TWRP recovery. So you'll need that. (In my opinion, TWRP is a better recovery, less issues)
You could go to their website to download it and get instructions on how to flash it, but there is a much easier way.
Go to the Play Store and install an app called TWRP Manager. Hit the three line menu thingy on the top left, and pick "Install TWRP".
After that go back to the stock backup thread and flash the backup that matches your CID and firmware.
Click to expand...
Click to collapse
Ok thanks I'll try that
xunholyx said:
Your CID is ORANG202 and your firmware is 1.54.73.5, so you will need the backup that corresponds with that.
The backup available was made with TWRP recovery. So you'll need that. (In my opinion, TWRP is a better recovery, less issues)
You could go to their website to download it and get instructions on how to flash it, but there is a much easier way.
Go to the Play Store and install an app called TWRP Manager. Hit the three line menu thingy on the top left, and pick "Install TWRP".
After that go back to the stock backup thread and flash the backup that matches your CID and firmware.
Click to expand...
Click to collapse
Okay so I could finally go s-off by flashing an 4.4.3 android revolution , can you tell me how I should do to flash this rom with wi-fi working ? :
http://forum.xda-developers.com/showthread.php?t=2706391
You would be the best
Thanks a lot
xunholyx said:
Firmware updates. If you have one fresh out of the box, Firewater would probably still work. And still does for some.
Click to expand...
Click to collapse
What firmware version works best with firewater? My firmware is 1.54.651.10
blop135 said:
Okay so I could finally go s-off by flashing an 4.4.3 android revolution , can you tell me how I should do to flash this rom with wi-fi working ? :
http://forum.xda-developers.com/showthread.php?t=2706391
You would be the best
Thanks a lot
Click to expand...
Click to collapse
My friend has made a comprehensive guide on firmware and firmware flashing, complete with downloads. Make sure to read the whole opening post so you understand everything. It looks like it might be hard because of his full explanation of the whole process, but it's actually very easy. And very informative.
xunholyx said:
My friend has made a comprehensive guide on firmware and firmware flashing, complete with downloads. Make sure to read the whole opening post so you understand everything. It looks like it might be hard because of his full explanation of the whole process, but it's actually very easy. And very informative.
Click to expand...
Click to collapse
Ok but I'm french so I'm not that good in english but I will try anyway Thanks

[Q] Need help returning to stock on my hon kong htc one m8

So I purchased the phone from somone, but the person who sold the phone to me also had a previous owner who rooted the phone and installed a rom. So as I deleted all the files for the person, something must have happened because ever since then, the wifi is not responding. It cannot search any routers nor does it turn on. So I am trying to return the phone to stock condition, but the process was a bit too hard for me to understand. Can someone explain it a bit easy for someone who does not know a lot about HTC devices and rooting?
So far, when I enter recovery mode, I get
Tampered Unlocked M8UL PVT SHIP S-OFF CID-HTC_622 HBOOT-3.16.0.0000 RADIO-1.16.21331831.A16G OpenDSP-v38.2.2-00542-M8974.0311 OS- eMMC-boot 2048MB May 20 2014
I think I wiped the recovery program(TWRP) or something because all I get is a red triangle with an exclamation point. I had done the getvar but I did not get any info in the main version part. So far I have installed the Maximus HD 9.0.0 rom. The radio is fine. Text, phone call, data all seems to work, but the only thing that is not working is the wifi. What steps should I take to return the phone to stock so that I don't have to worry about rooting and stock roms? As always, thanks for the feedback everybody! I had so much help from you guys!
chrislee0123 said:
So I purchased the phone from somone, but the person who sold the phone to me also had a previous owner who rooted the phone and installed a rom. So as I deleted all the files for the person, something must have happened because ever since then, the wifi is not responding. It cannot search any routers nor does it turn on. So I am trying to return the phone to stock condition, but the process was a bit too hard for me to understand. Can someone explain it a bit easy for someone who does not know a lot about HTC devices and rooting?
So far, when I enter recovery mode, I get
Tampered Unlocked M8UL PVT SHIP S-OFF CID-HTC_622 HBOOT-3.16.0.0000 RADIO-1.16.21331831.A16G OpenDSP-v38.2.2-00542-M8974.0311 OS- eMMC-boot 2048MB May 20 2014
I think I wiped the recovery program(TWRP) or something because all I get is a red triangle with an exclamation point. I had done the getvar but I did not get any info in the main version part. So far I have installed the Maximus HD 9.0.0 rom. The radio is fine. Text, phone call, data all seems to work, but the only thing that is not working is the wifi. What steps should I take to return the phone to stock so that I don't have to worry about rooting and stock roms? As always, thanks for the feedback everybody! I had so much help from you guys!
Click to expand...
Click to collapse
Your wifi isn't working because you are running a 4.4.4 ROM with 4.4.2 firmware. Look for a 4.4.2 based ROM, or update your firmware.
You can download the last(newest) 4.4.2 based Maximus HD ROM from here.
xunholyx said:
Your wifi isn't working because you are running a 4.4.4 ROM with 4.4.2 firmware. Look for a 4.4.2 based ROM, or update your firmware.
Click to expand...
Click to collapse
So is it possible to get a rom with a 4.4.2 and get an OTA from that ROM to a 4.4.4? Or does that not work. And also, I think I may have wiped the Recovery Program(TWRP?) and I think I need to install that again. Thanks for the help.
chrislee0123 said:
So is it possible to get a rom with a 4.4.2 and get an OTA from that ROM to a 4.4.4? Or does that not work. And also, I think I may have wiped the Recovery Program(TWRP?) and I think I need to install that again. Thanks for the help.
Click to expand...
Click to collapse
You will never get an OTA on a custom ROM. The problem is your model (Hong Kong). I'm not sure if you will be able to find stock backups or an RUU to return to stock to take the OTAs.
Hook up the phone to your PC, start up ADB/fastboot, and issue the command fastboot getvar all and post the readout here. I'll see if I can find something for you to return to stock. Edit out the serial no and IMEI from the readout for your own security.
xunholyx said:
You will never get an OTA on a custom ROM. The problem is your model (Hong Kong). I'm not sure if you will be able to find stock backups or an RUU to return to stock to take the OTAs.
Hook up the phone to your PC, start up ADB/fastboot, and issue the command fastboot getvar all and post the readout here. I'll see if I can find something for you to return to stock. Edit out the serial no and IMEI from the readout for your own security.
Click to expand...
Click to collapse
Thanks for the help, but the only problem that I have with the RUU and the stock backup is that I am confused on how to install them. Can you help me with distinguishing between them? I saw that when you want your m8 stock Google, you need to have some sort of Google RUU but that is as far as I know regarding RUU and Stock backups.
chrislee0123 said:
Thanks for the help, but the only problem that I have with the RUU and the stock backup is that I am confused on how to install them. Can you help me with distinguishing between them? I saw that when you want your m8 stock Google, you need to have some sort of Google RUU but that is as far as I know regarding RUU and Stock backups.
Click to expand...
Click to collapse
The RUUs aren't from Google, they are from HTC. I'm not sure if you'll find one for the Hong Kong model or not. The same applies for returning to stock using the stock ROM and recovery backups that are available here. You could also update your firmware manually since you are S-Off, but until I see a getvar, I can't point you in the right direction.
xunholyx said:
The RUUs aren't from Google, they are from HTC. I'm not sure if you'll find one for the Hong Kong model or not. The same applies for returning to stock using the stock ROM and recovery backups that are available here. You could also update your firmware manually since you are S-Off, but until I see a getvar, I can't point you in the right direction.
Click to expand...
Click to collapse
So this is what I have, do you need to know anything else? Thanks.
chrislee0123 said:
So this is what I have, do you need to know anything else? Thanks.
Click to expand...
Click to collapse
Okay. The link I provided in my last post has a stock backup for you. Choose the ones from CID HTC_622. You will need the one for 1.60.708.2 and the TWRP version for it installed in your phone. Put it into your backup folder and flash it. (full instructions are on that thread) Then you will need to flash the stock recovery from that thread. I couldn't find one to match. You might have to look elsewhere. You will be able to get the OTAs after that.
Or you could change to SuperCID (lots of instructions for that on XDA) and change your MID (Model ID, also lots of instructions here ~ change to 0P6B10000), then update manually with WWE firmware. You may be able to run WWE without changing your MID, but I can't confirm that. My MID is 0P6B12000, and I was able to flash international WWE firmware myself. Hope this helps.
xunholyx said:
Okay. The link I provided in my last post has a stock backup for you. Choose the ones from CID HTC_622. You will need the one for 1.60.708.2 and the TWRP version for it installed in your phone. Put it into your backup folder and flash it. (full instructions are on that thread) Then you will need to flash the stock recovery from that thread. I couldn't find one to match. You might have to look elsewhere. You will be able to get the OTAs after that.
Or you could change to SuperCID (lots of instructions for that on XDA) and change your MID (Model ID, also lots of instructions here ~ change to 0P6B10000), then update manually with WWE firmware. You may be able to run WWE without changing your MID, but I can't confirm that. My MID is 0P6B12000, and I was able to flash international WWE firmware myself. Hope this helps.
Click to expand...
Click to collapse
Can you provide a bit more clarification on the first option? Thanks!
chrislee0123 said:
Can you provide a bit more clarification on the first option? Thanks!
Click to expand...
Click to collapse
Sure. To go back to stock to get the OTAs, you need a stock ROM and stock recovery. I could find a stock ROM backup from that thread for your device, but not a stock recovery that matched. You will have to find that one on your own.
xunholyx said:
Sure. To go back to stock to get the OTAs, you need a stock ROM and stock recovery. I could find a stock ROM backup from that thread for your device, but not a stock recovery that matched. You will have to find that one on your own.
Click to expand...
Click to collapse
Thanks for the help! What stock recovery should I be specifically be looking for?
chrislee0123 said:
Thanks for the help! What stock recovery should I be specifically be looking for?
Click to expand...
Click to collapse
One that matches your firmware. It is explained in the link I provided
xunholyx said:
One that matches your firmware. It is explained in the link I provided
Click to expand...
Click to collapse
Hi! After some searching, I have found the file, but I am not really sure on what to do. The link that you provided me really did not explain a lot. I am a bit confused on the part where I got the zip, but don't know really what to do. I got the zip that you wanted me, the HTC 622 one with the 1.6.0XXX and you told me to put it in a recovery folder(?). Do I have to put it in there or is it something I can flash right off my sd card? Is the zip something that I put in the TWRP folder? I really tried to google it, but all I get is how I can use RUU on H BOOT to install TWRP or something. Thanks for the help.
Edit 1. Sorry, I forgot to mention the zip! The stock nandroid backups. I got that, but the recovery that you mentioned, I really got lost trying to look for it. Is it possible to just flash the nandroid backup without the boot loader locked but S-off with the TWRP and get the stock ROM?
chrislee0123 said:
Hi! After some searching, I have found the file, but I am not really sure on what to do. The link that you provided me really did not explain a lot. I am a bit confused on the part where I got the zip, but don't know really what to do. I got the zip that you wanted me, the HTC 622 one with the 1.6.0XXX and you told me to put it in a recovery folder(?). Do I have to put it in there or is it something I can flash right off my sd card? Is the zip something that I put in the TWRP folder? I really tried to google it, but all I get is how I can use RUU on H BOOT to install TWRP or something. Thanks for the help.
Edit 1. Sorry, I forgot to mention the zip! The stock nandroid backups. I got that, but the recovery that you mentioned, I really got lost trying to look for it. Is it possible to just flash the nandroid backup without the boot loader locked but S-off with the TWRP and get the stock ROM?
Click to expand...
Click to collapse
Okay. So I did a little research and came up with an official HTC RUU for your phone. As far as I know, it is the latest for the Hong Kong version (4.4.3). I say as far as I know because I don't deal with HK versions very often here.
Hook up to your PC and get into ADB/fastboot.
Download the official RUU from HTC's website by clicking here.
When the download is finished, double click it and choose run, (it's an .exe formatted file) then follow the prompts.
But please relize that running the RUU will WIPE EVERYTHING, so backup anything that you have that you don't want to lose.
xunholyx said:
Okay. So I did a little research and came up with an official HTC RUU for your phone. As far as I know, it is the latest for the Hong Kong version (4.4.3). I say as far as I know because I don't deal with HK versions very often here.
Hook up to your PC and get into ADB/fastboot.
Download the official RUU from HTC's website by clicking here.
When the download is finished, double click it and choose run, (it's an .exe formatted file) then follow the prompts.
But please relize that running the RUU will WIPE EVERYTHING, so backup anything that you have that you don't want to lose.
Click to expand...
Click to collapse
Thanks to your help, I have successfully returned to stock! Thank you for the kind and quick reply!
chrislee0123 said:
Thanks to your help, I have successfully returned to stock! Thank you for the kind and quick reply!
Click to expand...
Click to collapse
Cool. Glad to be of assistance.
Man is it good to be back to stock! Thanks again for the help!
chrislee0123 said:
Man is it good to be back to stock! Thanks again for the help!
Click to expand...
Click to collapse
There's a button for that thanks.
When I click on the link I get a .zip file with two .tar.gz files inside. No exe file. Am I missing something?

[Q] EU M9 still says "software status:modified" after RUU

Hi all
i wanted to go fully stock on my M9 to get official OTA.
but after i flashed the 1.40.401.8 RUU it still says "software status: modified" in the bootloader.
so the question is; will it break OTA or is it just annoying looking at?
thanks in advance.
KasperHermansen said:
Hi all
i wanted to go fully stock on my M9 to get official OTA.
but after i flashed the 1.40.401.8 RUU it still says "software status: modified" in the bootloader.
so the question is; will it break OTA or is it just annoying looking at?
thanks in advance.
Click to expand...
Click to collapse
If you were soff then you could return to full stock, just unlocking the boot loader then relocking it will show the tempered flag, personally never wanted to go back to stock for an ota so not 100% as to whether it'll work, a fair few people have said returning to stock and then accepting the ota is a way to get the firmware upgraded so I assume that it's OK.
If its not then it'll just fail. Shouldn't break anything, ota should always leave a way back
KasperHermansen said:
Hi all
i wanted to go fully stock on my M9 to get official OTA.
but after i flashed the 1.40.401.8 RUU it still says "software status: modified" in the bootloader.
so the question is; will it break OTA or is it just annoying looking at?
thanks in advance.
Click to expand...
Click to collapse
I think you have to flash an untouched system image for your device to take OTA that way. Why not just run the RUU for the new software/firmware?
dladz said:
If you were soff then you could return to full stock, just unlocking the boot loader then relocking it will show the tempered flag, personally never wanted to go back to stock for an ota so not 100% as to whether it'll work, a fair few people have said returning to stock and then accepting the ota is a way to get the firmware upgraded so I assume that it's OK.
If its not then it'll just fail. Shouldn't break anything, ota should always leave a way back
Click to expand...
Click to collapse
so there is no going back to unmodified after i modified the software, without throwing 20$ at sunshine?
BUBBA DUB'S said:
I think you have to flash an untouched system image for your device to take OTA that way. Why not just run the RUU for the new software/firmware?
Click to expand...
Click to collapse
the newest RUU i can find is 1.40.401.8 and i already flashed that and it still says that its modified
KasperHermansen said:
the newest RUU i can find is 1.40.401.8 and i already flashed that and it still says that its modified
Click to expand...
Click to collapse
Oh ok gotcha, I know to go back to completely stock to get OTA you have to find untouched system image and change something's around in twrp. Check out post #3 in this thread and read FAQ's #8.
http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720
KasperHermansen said:
so there is no going back to unmodified after i modified the software, without throwing 20$ at sunshine?
Click to expand...
Click to collapse
nope...
it's $25, not $20...
jollywhitefoot said:
nope...
it's $25, not $20...
Click to expand...
Click to collapse
I though with twrp if you made a system image back up in "read only" you can flash that and stock recovery after making a few changes in twrp and be fine to take OTA.
BUBBA DUB'S said:
I though with twrp if you made a system image back up in "read only" you can flash that and stock recovery after making a few changes in twrp and be fine to take OTA.
Click to expand...
Click to collapse
That's correct. I wasn't disagreeing with anything. Just saying Sunshine S-Off is $25, not $20...unless it's been discounted since I did it.
But no matter what you do, once your device status in bootloader changes to modified, you can't change it back to "official" without s-off.
jollywhitefoot said:
That's correct. I wasn't disagreeing with anything. Just saying Sunshine S-Off is $25, not $20...unless it's been discounted since I did it.
But no matter what you do, once your device status in bootloader changes to modified, you can't change it back to "official" without s-off.
Click to expand...
Click to collapse
Lol gotcha yea I'm at work so I don't always completely read things. My bad.
BUBBA DUB'S said:
I though with twrp if you made a system image back up in "read only" you can flash that and stock recovery after making a few changes in twrp and be fine to take OTA.
Click to expand...
Click to collapse
That's what my understanding is too. After installing TWRP take stock backup before rooting. Then install backup before taking OTA. One question though. SuperSU has an option to remove root. Will have to try this on the next OTA.
BUBBA DUB'S said:
Lol gotcha yea I'm at work so I don't always completely read things. My bad.
Click to expand...
Click to collapse
LOL. Who has time to read these days???
Flash first...then ask cryptic questions...find an outdated M8 youtube video or skim some old M7 tutorials...worst case scenario is to read and understand. (BTW, this is not directed at you...your post just made me think of the typical non-reading user)
KasperHermansen said:
so there is no going back to unmodified after i modified the software, without throwing 20$ at sunshine?
Click to expand...
Click to collapse
No there isn't. Soff, you will have been down this prior to unlocking
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
jollywhitefoot said:
That's correct. I wasn't disagreeing with anything. Just saying Sunshine S-Off is $25, not $20...unless it's been discounted since I did it.
But no matter what you do, once your device status in bootloader changes to modified, you can't change it back to "official" without s-off.
Click to expand...
Click to collapse
Still 25
To return to official status instead of modified simply run the RUU.zip using the 0PJAIMG.ZIP method
rename the RUU.zip to 0PJAIMG.ZIP, place it on a ext sd card formatted in FAT32 (a 16 or 32gig one should work), reboot into DOWNLOAD_MODE, agree and it should flash.
Click to expand...
Click to collapse
With s-off it will not change back to modified again
you can read all about it here >> http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882
clsA said:
To return to official status instead of modified simply run the RUU.zip using the 0PJAIMG.ZIP method
With s-off it will not change back to modified again
you can read all about it here >> http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882
Click to expand...
Click to collapse
After it's relocked, it'll still say tampered.
Sorry to bother, could someone help me please? http://forum.xda-developers.com/one-m9/help/conversion-to-developer-edition-t3151596
Thanks!
dladz said:
After it's relocked, it'll still say tampered.
Click to expand...
Click to collapse
m9 do not say tampered - they say Official or Modified
as far as I know the 0PJAIMG.ZIP method works on s-on also ... (never tried it though)
clsA said:
m9 do not say tampered - they say Official or Modified
as far as I know the 0PJAIMG.ZIP method works on s-on also ... (never tried it though)
Click to expand...
Click to collapse
Sorry I meant modified
I've never had to do it, but what would be the point of it if you could just flash that zip and you're back to stock?
dladz said:
Sorry I meant modified
I've never had to do it, but what would be the point of it if you could just flash that zip and you're back to stock?
Click to expand...
Click to collapse
I don't understand your question "what would be the point of it if you could just flash that zip and you're back to stock?"
if you use the 0PJAIMG.ZIP flash method it resets the phone to Official (isn't that what this thread is about ?)
with s-on the 0PJAIMG.ZIP would have to be your current firmware version or newer (you need s-off to go backwards)
this is all in theory as I have never flashed the 0PJAIMG.ZIP with s-on but it should work
OMJ describes using it with s-on here >> http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
Those are Sprint files but the method is the same
clsA said:
I don't understand your question "what would be the point of it if you could just flash that zip and you're back to stock?"
if you use the 0PJAIMG.ZIP flash method it resets the phone to Official (isn't that what this thread is about ?)
with s-on the 0PJAIMG.ZIP would have to be your current firmware version or newer (you need s-off to go backwards)
this is all in theory as I have never flashed the 0PJAIMG.ZIP with s-on but it should work
OMJ describes using it with s-on here >> http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
Those are Sprint files but the method is the same
Click to expand...
Click to collapse
I don't think they'll work. It'll still say modified.

Might have bricked my phone

Stupid mistake, just trying to get a usable phone back, dunno how.
Rooted it, Recovery TWRP.
decided want a custom rom, Android Revo 20.
didnt backup, woops.
was useless, googled, needed different firmware, flashed that somehow.
phone got worse.
reinstalled TWRP
tried to download a backup, 2 even, both dont work.
not sure what to do. think i need another firmware before the backup would work.
any advice will help
currently phone turns on straight to bootloader. can access download mode and recovery.
Bootloader unlocked, S-ON, HTC__J15,
iSammyJ said:
Stupid mistake, just trying to get a usable phone back, dunno how.
Rooted it, Recovery TWRP.
decided want a custom rom, Android Revo 20.
didnt backup, woops.
was useless, googled, needed different firmware, flashed that somehow.
phone got worse.
reinstalled TWRP
tried to download a backup, 2 even, both dont work.
not sure what to do. think i need another firmware before the backup would work.
any advice will help
currently phone turns on straight to bootloader. can access download mode and recovery.
Click to expand...
Click to collapse
Do you have google hangouts or whatsapp? i could help you out.
no =/
well yes i have whatsapp, but no working phone to use that.
Try ruu back to stock?
tried didnt work. still boots directly to bootloader
iSammyJ said:
tried didnt work. still boots directly to bootloader
Click to expand...
Click to collapse
Are you S-OFF?
Did the RUU complete successfully or give you an error?
Was the firmware you flash for your Model M9 or another one?
Tachi91 said:
Are you S-OFF?
Did the RUU complete successfully or give you an error?
Was the firmware you flash for your Model M9 or another one?
Click to expand...
Click to collapse
S-ON unfortunately
RUU failed. error. will try others tomorrow.
I got the firmware off Android Revolution site. I think it was correct.
iSammyJ said:
S-ON unfortunately
RUU failed. error. will try others tomorrow.
I got the firmware off Android Revolution site. I think it was correct.
Click to expand...
Click to collapse
What's your Model?
If youre S-OFF and firmware/RUU are not helping. You're probably trying to flash the wrong ones.
Tachi91 said:
What's your Model?
If youre S-OFF and firmware/RUU are not helping. You're probably trying to flash the wrong ones.
Click to expand...
Click to collapse
HTC__J15?
3.35.401.12 firmware should work with your Cid,
Which version of O.S did you read in download mode?
bzhmobile said:
3.35.401.12 firmware should work with your Cid,
Which version of O.S did you read in download mode?
Click to expand...
Click to collapse
1.32.401.17
I tried to use 3.35.401.12 backup but it still booted to bootloader
You have to flash 3.35.401.12 firmware in download mode before using the backup
and i cant flash firmware while S-ON right? i think i tried flashing higher firmware and it gave me that error.
so ill find 1.32.401.17 backup or rom and that should work?

Categories

Resources