Develop Bugs

Help!My Galaxy iS Dead=SOLVED THANKX

Hi
Yesterday i was trying to flash JPC to My Galaxy
After finishing flashing mine and i saw long time my screen showing Logo of
((S..Samsung Galaxy)) and it is showing like i have to wait but realy nothing is comming and it is vibrating somtimes
i was trying handreds time to open Download Mode but i cant!!
I press all three but nothing ,,i pull the battery but still nothing!!
In fact i flash my Galaxy many roms before but this problem first time happened!!!
Any Idea??

Wipe data. This should fix it

Try to boot in recovery (vol up, home and power) then wipe data.

jim_panse said:
Wipe data. This should fix it
Click to expand...
Click to collapse
Even recovery mode i could not open it!!!
NO recovery mode,No download Mode!

Gh0stw4lk3r said:
Try to boot in recovery (vol up, home and power) then wipe data.
Click to expand...
Click to collapse
ummmmmmmm
No way i tried before!!
I think i have to start giving sweet for all my kids!!

did you try rebooting to recovery via adb?

g00ndu said:
did you try rebooting to recovery via adb?
Click to expand...
Click to collapse
I tried also!!!

Recovery mode as I always enter it:
Hold vol up + home + power for 5 seconds.
For some people it seems quite hard to understand how to get their phones in recovery mode. Don't know or you are one of them, but just give it a try

japperrrr said:
Recovery mode as I always enter it:
Hold vol up + home + power for 5 seconds.
For some people it seems quite hard to understand how to get their phones in recovery mode. Don't know or you are one of them, but just give it a try
Click to expand...
Click to collapse
I have done small trick and its working fine..Flashing Back to 2.1
THANKX FOR ALL

alfrqan said:
I have done small trick and its working fine..Flashing Back to 2.1
THANKX FOR ALL
Click to expand...
Click to collapse
Don't forget to restore your product code!

I flashed JPC using kies and back to JM5 using Odin and everything works fine. What is the need for changing the product code? Maybe it's location specific? I am in India.
Sent from my GT-I9000 using XDA App

When you flashed to JPC the registry hack for Kies changed your product code. Now it's I9000xxxKOR or something like that, where KOR should be something else depending on where you bought your phone. You can find instructions at the bottom of the startpost from the announcement of JM7.

Semi Bricked/Bricked Phone Needs Fixing

Hi Guys -
First time android user and attempted rooting using the odin method. I followed the instruction listed here http://forum.xda-developers.com/showthread.php?t=1311194 to the "T" before starting. I was doing alright until after flashing the recovery-cwm-hercules.tar, then it gets weird. It didn't flash to recovery but just rebooted to the main screen (where I could see the background picture with the locker pattern), then it immediately shuts off and the cycle begins again.
The weird thing is that I can't even access recovery mode (hold vol. up+down+power), because I'll see the Clockworkmod logo then it flickers and reboot itself. This happens every time I attempted recovery mode.
My attempts to fix it:
1. I flashed the recovery, http://forum.xda-developers.com/showthread.php?t=1315390, to see if it makes any difference. The same story happens with loading to main screen w/locker then it reboots itself again and again. Sometimes I'll be lucky to input the pattern but before soon it will reboot itself again. Same thing with recovery mode as described above.
2. Flashing the stock kernel provided by http://forum.xda-developers.com/showthread.php?t=1311229 to see if it does anything. Nope, same story for both recovery mode/home screen.
3. The insecure kernel, http://forum.xda-developers.com/showthread.php?t=1320946. Same story. nope, nope.
4. Tried these in all order and permutation. Nada.
5. Tried it both ways using samsung driver/kies.
6. Tried it both ways with/without SIM card.
7. Battery is fully charged when attempting any flashing.
8. All the above in my second computer to no avail.
I'm sorry if this might come across as long winded but I just want you guys to get the full picture. I would really appreciate it if you guys could offer any solutions or advice on how to correct this problem. Please be gentle with this first time android user haha, thanks in advance man.

Manually boot into recovery (vol up/down keys) and make a backup (be sure to do this). Then try wipe data/factory reset through recovery. Sounds like a ROM issue not a hardware issue

First off, thanks roman for the quick reply. That's the thing I can't get to recovery manually with the button combinations. When I do that it gives me this message:
[Picture]White dropbox/mail box with a yellow arrow pointing to the Android
"Verifying internal mmc block
Checksum confirmation check (0)
No need checksum confirmation already exceuted
#manual mode#"
It would then reboot and goes to the screen with the locker then immediately repeats that cycle. It doesn't have any wipe options/restart now/etc.
No way to power it down except with battery removal. I've attempted what you suggested many times too to no avail.

redlaws said:
First off, thanks roman for the quick reply. That's the thing I can't get to recovery manually with the button combinations. When I do that it gives me this message:
[Picture]White dropbox/mail box with a yellow arrow pointing to the Android
"Verifying internal mmc block
Checksum confirmation check (0)
No need checksum confirmation already exceuted
#manual mode#"
It would then reboot and goes to the screen with the locker then immediately repeats that cycle. It doesn't have any wipe options/restart now/etc.
No way to power it down except with battery removal. I've attempted what you suggested many times too to no avail.
Click to expand...
Click to collapse
Ok, so if it actually boots into the ROM but reboots, try rebooting to recovery from adb -- "adb reboot recovery"

think it's a no go . i tried using adb recovery method and the same thing would occur, it would restart and seems to load into recovery mode but then I would only see the logo, then it flickers and restart itself.
then the vicious cycle of loading up to the screen-locker and restarting itself begins. guess this is the smartphone version of being friend-zoned.

Have you tried taking battery out then back in and while holding volume up/down plug it back into computer? That has never failed to get me into d/l mode. Man I hope you get it working.

Yeah I tried that and getting to download mode is not the problem. just that recovery mode doesn't boot properly in that it would restarts itself. and when i boot normally to screen, i would see the locker and background picture then within 3 secs, it would restart itself.
Guess last resort is to go to t-mobile store, play dumb, and get samsung on it. only problem is that i worry about the flash rom counter # since mine is like 10 already (my attempts to address this problem). Let's hope those tmobile reps aren't that tech savvy.
Thanks for all the help fellas, great early posting experiences so far.

I'm sorry I've read your post..and i'm confuse, if you're able to go into download mode, then why could you just start Odin and flash the recovery again. If its unsuccessful then check the MD5 to see if you have a bad download. I think you should download the recoveries files again add give Odin another shot..Good luck..
Sent from my SGH-T989 using XDA App

are you able to go into CW recovery ?
if so, you can mount the USB, download a stock ROM, and then flash it using CWR

kt0ce said:
I'm sorry I've read your post..and i'm confuse, if you're able to go into download mode, then why could you just start Odin and flash the recovery again. If its unsuccessful then check the MD5 to see if you have a bad download. I think you should download the recoveries files again add give Odin another shot..Good luck..
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I'm going to give it another try. I've been trying it with different files for a good 2 days now though.

AllGamer said:
are you able to go into CW recovery ?
if so, you can mount the USB, download a stock ROM, and then flash it using CWR
Click to expand...
Click to collapse
I understand that but that's the a big problem. If I could go to CW it would be a different story but I can't go into CW recovery. I would be able to see the logo CWR and the version number then immediately it shuts off again and reboot. Happens every time without fail.

redlaws said:
I understand that but that's the a big problem. If I could go to CW it would be a different story but I can't go into CW recovery. I would be able to see the logo CWR and the version number then immediately it shuts off again and reboot. Happens every time without fail.
Click to expand...
Click to collapse
did you let go of holding the vol+ & vol- buttons as soon as you see the blue text in CWR ?
it can easily reboot by accident when holding those buttons and hitting power, but the buttons are so responsive it selected the first option to reboot the phone by accident a couple of times on me

I'm positive that I held it properly and long enough. I never got to the blue text, just the CWR logo showing then turns off (like you shutting off a tv) and reboots itself. Trying to flash it again with Odin didn't work either and I tried the recoveries from different sources as well.
I went to the Tmobile store today and seems like they'll mail me a replacement then I'll return my current one to them. Only thing is stocking/processing fee but it's a small price to pay if it resolves everything.

glad they will give you another one..

Dude if you can get into download mode then it can most likely be fixed by flashing stock through odin. This would save you some $$. Just saying.

reocej said:
Dude if you can get into download mode then it can most likely be fixed by flashing stock through odin. This would save you some $$. Just saying.
Click to expand...
Click to collapse
Dude, I understand that it should but it's not. I've flashed the stock recovery for more than 10 times and I still can't past the home screen. It would just reboot itself in less than 3 sec. And I'm positive I flashed it properly. Believe me I don't want to spend extra money if I don't have too.

S3 won't boot, load CWM, go into download mode...

Alright, so I have an i-747 (AT&T GS3) running AOKP Jellybean (8.28 build) with the KT747 kernel. I just tried to install Chainfire 3D using the automated installer, and when the phone rebooted, it stuck at the Samsung Galaxy S3 logo until I pulled battery. So I tried rebooting into CWM - same problem. And again with download mode. Even after pulling the battery for a good 5 minutes, nothing works. Am I bricked, or is there some fix for this?

If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

g2tegg said:
If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I made a nandroid just this afternoon, but I can't actually boot into CWM at all. As in, I turn on the phone (power+home+volume up), it gets to the Galaxy S3 logo and just hangs there. If I could get into CWM (or download mode) this would be about a 10 minute fix, but I'm kind of out of luck here.

Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.

HELP I have the same issue
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse

Hi, sorry to say but sounds like its bricked
Thanks

MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse
I doubt it's bricked if he got it into download mode. I'm sure he's flashed it and even got his wallpaper back up by now. Please let us know of you've managed to solve this or not MrPhantom.
Sent from my SGS3 i747m (Bell) on CM10 using TapaTalk2

delete post please

Curious?
I know its technically "Solved" but does anyone have any idea why this is happening? I have a Verizon GS3 and it's happening to me. I try to boot and it vibrates once and doesn't turn on. Recovery does the same thing. But going into Download mode works. Odin back to stock as we speak but I'm just curious what went wrong. I just did a clean install of a rom, set it all up (working at the time), set it down for the night and woke up to it like this.

rrrs444230 said:
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
Click to expand...
Click to collapse
Same thing happned to me but your not bricked. You can get into bolth download and boot mode easy
Here is how you do it.
RECOVERY MODE
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
[edit]Download Mode
Save that somewhere. Make sure do it right. I got stuck also and thought I couldn't get into recovery but I had to do it right (it hit recovery mode first try) I have learned that most people do it slightly wrong. Make sure follow directions
Download mode
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
To get out of Download Mode, simply press and hold the power button until the phone restarts
if helps hit thanks.
Just save that to a text file somewhere
I have also soft bricked when I deleted my rom once on accident. I dunno how I did it but I would get stuck at the TWRP screen. It wouldn't go to download or anything however when I plugged it into odin it saw it .... I even had a soft brick when screen went black from a bad boot animation and same thing.. and I had one bad soft brick where it took about 100 trys to get it into download mode (black screen) but odin detected it. I spent like 4 hours working on it.
I think
1. People don't follow directions correct (they do it a little wrong) which is enough if your phones messed up for it not to work.
when your phones normal it can get into recovery or download easy but when its sick you got to do it perfect.
2. I think something wrong with the phones (my s2 never had any issues in 2 years of owning it) S3 has tons of issues from usb, to bluetooth, to these soft bricks I have had)
3. Roms play a big part
4. I also think the way storage works in this new phone causes lots issues I dunno why just what I think
anyway Like I said now when I have a isssue I open text and read it and make sure I do it right and 95 percent of the time it was my fault I wasn't doing it right. K just my thoughts

when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different

phatchef1 said:
when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different
Click to expand...
Click to collapse
That's most likely cause you're not in the right section..: http://forum.xda-developers.com/forumdisplay.php?f=1708

Phone won't boot to recovery, won't boot to system after upgrade TWRP 2.6.3.0

OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?

OK, flashed twrp via odin, see pics.
brisk5181 said:
OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
Click to expand...
Click to collapse

Oh man. You're not the only one.
This happened to me yesterday. I had to flash back to stock. Now, I am about to root again. Good luck, mate.

This seems to happen with Goo everytime there's a new version of TWRP. I have read that the easiest fix is to flash the TWRP tar file with Odin. Every post I have read, said that everything was fine after that. Sounds like Goo doesn't mess with anything but the recovery in those cases. I used this fix once when I flashed a recovery zip that didn't work.

As of date. It appears Goomanager is the culprit.

I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?

tthreeoh said:
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
Click to expand...
Click to collapse
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Can I install 4.3 with twrp2.6.1.0 recovery?

I installed 2.6.1.0 and I still can't get past teamwin...

Soft Bricked
tthreeoh said:
I installed 2.6.1.0 and I still can't get past teamwin...
Click to expand...
Click to collapse
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0

if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse

brisk5181 said:
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
Click to expand...
Click to collapse
I appreciate, There's so many on Amazon, how do I know which one is correct ?

VermontKindBud said:
I appreciate, There's so many on Amazon, how do I know which one is correct ?
Click to expand...
Click to collapse
any should work.
this is what I bought
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html

VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
In case you missed it. You have to remove the battery. (it would be nice if this helps your problem)

soupysoup said:
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks man... Got me out-of hat water with the wife. .

You guys are life savers! Thank you!!!!

Jig not working either
So, as mentioned before, GooManager updated me to TWRP 2.6.3.0, and now I can't boot past samsung splash screen. No method I used would get me to download mode so I took the advice in the thread and bought a USB Jig. Even removing the battery and leaving it out for 2 minutes and then reinserting it, followed by inserting the jig in the charger port and waiting, and nothing happens. Turning the device on with the jig in the port also does nothing but a quick flash of the splash screen logo and then darkness forever. Definitely doesn't bring up download mode or any kind of yellow triangle. Anyone tell me what I'm doing wrong? You'd think that as long as I can get to the samsung logo screen that there would be some way to recover this device and that I'm no hard bricked. Other people have managed to recover from the GooManger TWRP 2.6.3.0 issue, so why can't I?

shot my USB jig came in today & can't get it into to download mode at all NO

gata love odin it saves you every time

BootLoop post Viper4Android module on Magisk with Lineage 15/Oreo

Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.

Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk

AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.

Isn't download mode volume down + home + power?

Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk

audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.

You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197

Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic

audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks

ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.

audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?

Removed the battery, inserted the jig, and then inserted a charged battery?

audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:

Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.

audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.

Try flashing the entire ROM in AP.

audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...

Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.

N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.