OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
OK, flashed twrp via odin, see pics.
brisk5181 said:
OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
Click to expand...
Click to collapse
Oh man. You're not the only one.
This happened to me yesterday. I had to flash back to stock. Now, I am about to root again. Good luck, mate.
This seems to happen with Goo everytime there's a new version of TWRP. I have read that the easiest fix is to flash the TWRP tar file with Odin. Every post I have read, said that everything was fine after that. Sounds like Goo doesn't mess with anything but the recovery in those cases. I used this fix once when I flashed a recovery zip that didn't work.
As of date. It appears Goomanager is the culprit.
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
tthreeoh said:
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
Click to expand...
Click to collapse
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Can I install 4.3 with twrp2.6.1.0 recovery?
I installed 2.6.1.0 and I still can't get past teamwin...
Soft Bricked
tthreeoh said:
I installed 2.6.1.0 and I still can't get past teamwin...
Click to expand...
Click to collapse
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
brisk5181 said:
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
Click to expand...
Click to collapse
I appreciate, There's so many on Amazon, how do I know which one is correct ?
VermontKindBud said:
I appreciate, There's so many on Amazon, how do I know which one is correct ?
Click to expand...
Click to collapse
any should work.
this is what I bought
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
In case you missed it. You have to remove the battery. (it would be nice if this helps your problem)
soupysoup said:
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks man... Got me out-of hat water with the wife. .
You guys are life savers! Thank you!!!!
Jig not working either
So, as mentioned before, GooManager updated me to TWRP 2.6.3.0, and now I can't boot past samsung splash screen. No method I used would get me to download mode so I took the advice in the thread and bought a USB Jig. Even removing the battery and leaving it out for 2 minutes and then reinserting it, followed by inserting the jig in the charger port and waiting, and nothing happens. Turning the device on with the jig in the port also does nothing but a quick flash of the splash screen logo and then darkness forever. Definitely doesn't bring up download mode or any kind of yellow triangle. Anyone tell me what I'm doing wrong? You'd think that as long as I can get to the samsung logo screen that there would be some way to recover this device and that I'm no hard bricked. Other people have managed to recover from the GooManger TWRP 2.6.3.0 issue, so why can't I?
shot my USB jig came in today & can't get it into to download mode at all NO
gata love odin it saves you every time
Related
Alright, so I have an i-747 (AT&T GS3) running AOKP Jellybean (8.28 build) with the KT747 kernel. I just tried to install Chainfire 3D using the automated installer, and when the phone rebooted, it stuck at the Samsung Galaxy S3 logo until I pulled battery. So I tried rebooting into CWM - same problem. And again with download mode. Even after pulling the battery for a good 5 minutes, nothing works. Am I bricked, or is there some fix for this?
If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I made a nandroid just this afternoon, but I can't actually boot into CWM at all. As in, I turn on the phone (power+home+volume up), it gets to the Galaxy S3 logo and just hangs there. If I could get into CWM (or download mode) this would be about a 10 minute fix, but I'm kind of out of luck here.
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
HELP I have the same issue
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse
Hi, sorry to say but sounds like its bricked
Thanks
MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse
I doubt it's bricked if he got it into download mode. I'm sure he's flashed it and even got his wallpaper back up by now. Please let us know of you've managed to solve this or not MrPhantom.
Sent from my SGS3 i747m (Bell) on CM10 using TapaTalk2
delete post please
Curious?
I know its technically "Solved" but does anyone have any idea why this is happening? I have a Verizon GS3 and it's happening to me. I try to boot and it vibrates once and doesn't turn on. Recovery does the same thing. But going into Download mode works. Odin back to stock as we speak but I'm just curious what went wrong. I just did a clean install of a rom, set it all up (working at the time), set it down for the night and woke up to it like this.
rrrs444230 said:
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
Click to expand...
Click to collapse
Same thing happned to me but your not bricked. You can get into bolth download and boot mode easy
Here is how you do it.
RECOVERY MODE
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
[edit]Download Mode
Save that somewhere. Make sure do it right. I got stuck also and thought I couldn't get into recovery but I had to do it right (it hit recovery mode first try) I have learned that most people do it slightly wrong. Make sure follow directions
Download mode
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
To get out of Download Mode, simply press and hold the power button until the phone restarts
if helps hit thanks.
Just save that to a text file somewhere
I have also soft bricked when I deleted my rom once on accident. I dunno how I did it but I would get stuck at the TWRP screen. It wouldn't go to download or anything however when I plugged it into odin it saw it .... I even had a soft brick when screen went black from a bad boot animation and same thing.. and I had one bad soft brick where it took about 100 trys to get it into download mode (black screen) but odin detected it. I spent like 4 hours working on it.
I think
1. People don't follow directions correct (they do it a little wrong) which is enough if your phones messed up for it not to work.
when your phones normal it can get into recovery or download easy but when its sick you got to do it perfect.
2. I think something wrong with the phones (my s2 never had any issues in 2 years of owning it) S3 has tons of issues from usb, to bluetooth, to these soft bricks I have had)
3. Roms play a big part
4. I also think the way storage works in this new phone causes lots issues I dunno why just what I think
anyway Like I said now when I have a isssue I open text and read it and make sure I do it right and 95 percent of the time it was my fault I wasn't doing it right. K just my thoughts
when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different
phatchef1 said:
when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different
Click to expand...
Click to collapse
That's most likely cause you're not in the right section..: http://forum.xda-developers.com/forumdisplay.php?f=1708
here the deal
had stock rom on my 10.5 T-800
decided to root used Odin 3.09 and CF_AutoRoot_Port_T800_BeansTown106.tar to root
than download flashily (sp) and installed trwt newest one and flashed Blisspop 2.0 and Gapps 5.0.1 and Super Su 2.46
than after I went in to recovery and followed all the directions booted up logged on no issues
but today I was reading and decided I wanted to flash cm-12-20150203-UNOFFICIAL-nvertigo-chagallwifi
battery level was about 85% when I was hook up and transfer the cm-12-20150203-UNOFFICIAL-nvertigo-chagallwifi to my external SD
for some reason I went to download mode not recovery mode by the 3 button combo
so I tried to exit by holding the power button to no avail.
so I entered Odin and thought maybe just to run root again so it would let me exit Odin mode
after it flashed it exited and showed the red android and rebooted and went to a black screen as if it was going to boot back up and now I have nothing
I tried to turn it back on wont turn on
I tried the 3 button combo and then hitting up don't work
I plug it in to the computer and the computer make the connection sound but no icon for it
opened Odin and it shows green but wont do anything
is there something I can do beside sending it out to get repaired
thanks in advance
jimlmackjr said:
here the deal
had stock rom on my 10.5 T-800
decided to root used Odin 3.09 and CF_AutoRoot_Port_T800_BeansTown106.tar to root
than download flashily (sp) and installed trwt newest one and flashed Blisspop 2.0 and Gapps 5.0.1 and Super Su 2.46
than after I went in to recovery and followed all the directions booted up logged on no issues
but today I was reading and decided I wanted to flash cm-12-20150203-UNOFFICIAL-nvertigo-chagallwifi
battery level was about 85% when I was hook up and transfer the cm-12-20150203-UNOFFICIAL-nvertigo-chagallwifi to my external SD
for some reason I went to download mode not recovery mode by the 3 button combo
so I tried to exit by holding the power button to no avail.
so I entered Odin and thought maybe just to run root again so it would let me exit Odin mode
after it flashed it exited and showed the red android and rebooted and went to a black screen as if it was going to boot back up and now I have nothing
I tried to turn it back on wont turn on
I tried the 3 button combo and then hitting up don't work
I plug it in to the computer and the computer make the connection sound but no icon for it
opened Odin and it shows green but wont do anything
is there something I can do beside sending it out to get repaired
thanks in advance
Click to expand...
Click to collapse
Try to use resistor JIG 301kom for correctly start Download mode and to flash official Rom through Odin. Here you will find details how to do it:
http://forum.xda-developers.com/showthread.php?t=2999838
It also helps you get the picture Download mode and process flashing on the screen of your Tab.
Regards
All you need do is press power + vol down and hold until the tab restarts. This is a hard reset and always works unless it's a hard brick.
You have only soft bricked.
As soon as it restarts try to enter recovery or download mode.
Sent from my HTC One_M8 using XDA Free mobile app
Sounds like you don't have a custom recovery on your Tab S. You can flash TWRP recovery in Odin and see if that helps.
ashyx said:
All you need do is press power + vol down and hold until the tab restarts. This is a hard reset and always works unless it's a hard brick.
You have only soft bricked.
As soon as it restarts try to enter recovery or download mode.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
ok that helped out
Now what do I do I can get to DL mode but nothing else
a quick walk trough with some links to what I need to DL would help
im a noob again ive not flashed anything for over 4 years
I can only get to download mode and when I say reboot phone it goes back to black screen
I DL this openrecovery-twrp-2.8.0.1-chagallwifi
ran it in recovery and system uploaded and restarted Samsung logo comes up than screen goes black and nothing after then had to hard reset than boot in DL mode
hope I giving enough info to help
jimlmackjr said:
ok that helped out
Now what do I do I can get to DL mode but nothing else
a quick walk trough with some links to what I need to DL would help
im a noob again ive not flashed anything for over 4 years
I can only get to download mode and when I say reboot phone it goes back to black screen
I DL this openrecovery-twrp-2.8.0.1-chagallwifi
ran it in recovery and system uploaded and restarted Samsung logo comes up than screen goes black and nothing after then had to hard reset than boot in DL mode
hope I giving enough info to help
Click to expand...
Click to collapse
Also you can try to use KIES 3 for restoration of your Tab. To do this, you should take only Download mode in your Tab. For this case I recommend to you to restore only original firmware according to the name of model and serial number of your Tab. Here you will find details how to do it:
http://forum.xda-developers.com/showpost.php?p=58515655&postcount=3
jimlmackjr said:
ok that helped out
Now what do I do I can get to DL mode but nothing else
a quick walk trough with some links to what I need to DL would help
im a noob again ive not flashed anything for over 4 years
I can only get to download mode and when I say reboot phone it goes back to black screen
I DL this openrecovery-twrp-2.8.0.1-chagallwifi
ran it in recovery and system uploaded and restarted Samsung logo comes up than screen goes black and nothing after then had to hard reset than boot in DL mode
hope I giving enough info to help
Click to expand...
Click to collapse
As I said use Odin to flash TWRP recovery.
maxal said:
As I said use Odin to flash TWRP recovery.
Click to expand...
Click to collapse
I did use TWRP openrecovery-twrp-2.8.0.1-chagallwifi and still rebooted than went to black screen than nothing
going to DL sammobile t-800 factory file
jimlmackjr said:
I did use TWRP openrecovery-twrp-2.8.0.1-chagallwifi and still rebooted than went to black screen than nothing
going to DL sammobile t-800 factory file
Click to expand...
Click to collapse
Did you flash the TWRP tar file in downloadmode using Odin?
FIXED THANKS all for the help
Finally got it working
I tried to Odin TWRP and it didn't work I used the TAR file
I was able to DL the sammobile file for the Stock rom
Odin Flashed it first time it still had to use hard reset so I flashed it again after reboot it got stuck on Samsung splash Screen
did a 3 button to recovery wiped Cashes and factory reset then rebooted it again got stuck on Splash screen let it sit for over a hour (I had PT in the morning) and when I came back it was at the Samsung Master reset screen (initial start up)
than I rerooted, flashed and installed the ROM
Thanks again for all the help and being patient with me
:good::good::good::good::good::good::good::good::good::good:
Glad to hear that everything worked out for you. I was freaking out yesterday because I was just trying to run the auto root for my device and couldn't understand why odin refused to flash it. I ended up in adb sideload mode and thought it had locked up because I could not reset it at all. Luckily I did some searching on here and found out that holding power + home + vol up+ vol down would reboot it out of that mode.
Then I found out that while my adb drivers were installed properly for the device, they were not correct in download mode which was why odin didn't find my device. If I only would have checked device manager to see the big fat yellow ! It would have been clear but yes I am just a noob lol.
Hi, my device after a soft reset, reboots to the teamwin blue screen flashes black and then again to the teamwin screen. I cant get to recovery mode to restore rom. Any help would be appreciated.
Gloriel said:
Hi, my device after a soft reset, reboots to the teamwin blue screen flashes black and then again to the teamwin screen. I cant get to recovery mode to restore rom. Any help would be appreciated.
Click to expand...
Click to collapse
Hold power+home+volume up and down buttons all at the same time until it's fully shutoff. Then quickly press the download mode button combo and reflash twrp
DUHAsianSKILLZ said:
Hold power+home+volume up and down buttons all at the same time until it's fully shutoff. Then quickly press the download mode button combo and reflash twrp
Click to expand...
Click to collapse
Thanks for the answer but i can't get the device to enter download mode. When i reboot the device (with any combination of keys) it says on top left corner of the screen "Recovery Booting..." and then it enters to teamwin screen loop, no matter what i press.
Gloriel said:
Thanks for the answer but i can't get the device to enter download mode. When i reboot the device (with any combination of keys) it says on top left corner of the screen "Recovery Booting..." and then it enters to teamwin screen loop, no matter what i press.
Click to expand...
Click to collapse
Same thing happening here. I have tried everything and can't get over it.
Does anyone knows how to fix this. I 'm afraid that my tablet is beyond repair
Gloriel said:
Does anyone knows how to fix this. I 'm afraid that my tablet is beyond repair
Click to expand...
Click to collapse
Wait till its completely dead. Plug it in and press the download mode button combo. Might be your last hope
DUHAsianSKILLZ said:
Wait till its completely dead. Plug it in and press the download mode button combo. Might be your last hope
Click to expand...
Click to collapse
Thanks for your answer but the same think happens.
Same appened here. After a factory reset its stucked on teamview boot loop.
Anyone got a solution??
Solved by flashing cf-auto-root with odin on download mode.
Just ran into this myself haha. The device is just soft-bricked and I managed to get it into Odin mode (Download). Will let it charge for a bit then either flash stock firmware with Odin or try flashing TWRP again to see if that fixes it
Edit: flashing the latest TWRP worked
Same thing is happening to me. I get stuck in the teamwin boot loop and cannot get into the download mode to fix with Odin.
This all came about after trying to factory wipe the device due to Google Play not working correctly. I'll repost if I have success...
Just recovered my tablet from the same issue. In order to get into download mode, I had to let the battery fully drain. Then, holding the home and vol down keys, I plugged it into the charger. Plugging the charger in while the battery was drained automatically powered it up. After I saw the download warning, I released the buttons and entered download mode as usual. Then I flashed the latest TWRP with Odin.
No other combination of booting or button pressing worked. Trying to enter download with home+vol down and pressing power did not work for me either.
Good luck and PM me if you have any questions about this. I hope I explained it correctly.
Greetings XDA Developers,
Newbie here. I own a Samsung Galaxy Tab S (SM T705). I was able to root it a few weeks ago and I decided to install a custom recovery (TWRP) using an app from the Playstore named "TWRP Manager". I didn't hesitate to do so using this method because I was able to install TWRP on my GT I9300 successfully from the past using this app. However, after being prompted by the app that the recovery was successfully installed and needs to reboot the device, my tab was stuck on start up screen ( See attached photo ). I tried long pressing the power button but nothing happened. I waited until the device ran out of battery and when it did, I plugged in the charger and I'm back at the same screen. After google-ing some possible solutions, I tried to boot it into recovery but was unsuccessful, however, I was able to boot into download mode.
I'd like to ask for the help of some "experienced" users in this forum on how to solve this problem. And if possible, I'm hoping that flashing a stock recovery using Odin wouldn't be my last resort.
Thank you in advance.
paul952102 said:
Greetings XDA Developers,
Newbie here. I own a Samsung Galaxy Tab S (SM T705). I was able to root it a few weeks ago and I decided to install a custom recovery (TWRP) using an app from the Playstore named "TWRP Manager". I didn't hesitate to do so using this method because I was able to install TWRP on my GT I9300 successfully from the past using this app. However, after being prompted by the app that the recovery was successfully installed and needs to reboot the device, my tab was stuck on start up screen ( See attached photo ). I tried long pressing the power button but nothing happened. I waited until the device ran out of battery and when it did, I plugged in the charger and I'm back at the same screen. After google-ing some possible solutions, I tried to boot it into recovery but was unsuccessful, however, I was able to boot into download mode.
I'd like to ask for the help of some "experienced" users in this forum on how to solve this problem. And if possible, I'm hoping that flashing a stock recovery using Odin wouldn't be my last resort.
Thank you in advance.
Click to expand...
Click to collapse
Your going to need some fast hands for this one! I've ran into this lots of times when testing kernels and such. Any force reboot by holding Power Button+ Home Button + BOTH Volume buttons all at the same time. Press and hold that combo until the screen goes black. Then once the screen goes black quickly press and hold Power Button+ Home Button + Volume down buttons all at the same time. You should no enter into download mode. You said that you drained the battery so I would suggest charging it in download mode for 30 minutes or so then flash TWRP with Odin.
Your going to need to flash stock recovery or TWRP with Odin to override the boot and get it working
The TWRP app doesn't always work in which is why I use Odin.
Sent from my SM-T800 using Tapatalk
As a side note for future reference, hard reset is simply hold POWER + VOL DOWN.
As said all you need do is boot to download mode and flash recovery.
If you're on lollipop you may need to immediately boot into recovery after flashing to make it stick.
ashyx said:
As a side note for future reference, hard reset is simply hold POWER + VOL DOWN.
As said all you need do is boot to download mode and flash recovery.
If you're on lollipop you may need to immediately boot into recovery after flashing to make it stick.
Click to expand...
Click to collapse
Hey, thanks for the heads up. But how exactly do I "immediately boot into recovery after flashing to make it stick." Since after I flash recovery via odin, it would obviously automatically reboot my device? sorry for the dumb question.
DUHAsianSKILLZ said:
Your going to need some fast hands for this one! I've ran into this lots of times when testing kernels and such. Any force reboot by holding Power Button+ Home Button + BOTH Volume buttons all at the same time. Press and hold that combo until the screen goes black. Then once the screen goes black quickly press and hold Power Button+ Home Button + Volume down buttons all at the same time. You should no enter into download mode. You said that you drained the battery so I would suggest charging it in download mode for 30 minutes or so then flash TWRP with Odin.
Your going to need to flash stock recovery or TWRP with Odin to override the boot and get it working
The TWRP app doesn't always work in which is why I use Odin.
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
paul952102 said:
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
Click to expand...
Click to collapse
Both are the same I think. Some people name it by our product name or device name (one has xx and one doesn't. Both are the same)
Sent from my SM-T800 using Tapatalk
paul952102 said:
Hey, thanks for the heads up. But how exactly do I "immediately boot into recovery after flashing to make it stick." Since after I flash recovery via odin, it would obviously automatically reboot my device? sorry for the dumb question.
Click to expand...
Click to collapse
You either be quick and hold POWER + HOME + VOL UP as soon as it reboots or you uncheck auto reboot in Odin then restart manually.
paul952102 said:
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
Click to expand...
Click to collapse
So did the solution work? I am looking at a SM-T705 on ebay being sold for parts with similar symptoms. hoping I can fix it for a great bargain.
I am really stuck here! I've got an H811 T-Mobile variant G4. It's been rooted and running TWRP 2.8, but recently I flashed CM 12.1 and CM recovery because I wanted to receive the nightly OTAs. Anyway, now I want to unroot and flash stock, but I am unable to get into Download mode since installing the CM recovery. I tried using Flashfire to flash TWRP and was unable to reboot into recovery, The phone hung at the LG startup screen. I then tried flashing CWM also through Flashfire, the same results. I tried doing the hard key boot into recovery with the power buttons, but it didn't do anything but boot the phone.
Unless I can get into Download Mode I cannot unroot. Anyone have any ideas???
So you've tried turning the device off, holding volume up then plugging into USB?
the_scotsman said:
So you've tried turning the device off, holding volume up then plugging into USB?
Click to expand...
Click to collapse
yep tried that. It just does a normal boot.
Fixed
So the problem was 99% of the posts online give the wrong instructions for getting into download mode. It's just volume up and plug in the USB. Back on track, flashing stock!
Sean Patterson said:
So the problem was 99% of the posts online give the wrong instructions for getting into download mode. It's just volume up and plug in the USB. Back on track, flashing stock!
Click to expand...
Click to collapse
That's exactly what I said in my post
the_scotsman said:
That's exactly what I said in my post
Click to expand...
Click to collapse
haha, yes you did. If I had read your post like you wrote it I could have saved myself some time. thanks!