Develop Bugs

Booting to recovery with button combination not working

So, after trying out a few firmwares (JM2, JG8, JM5) and kernels (Samset&OC) I can't no longer boot to recovery with Vol UP + Home + power. I can't really say when this problem first occurred, but maybe with JG8 flash. The strange thing is that I can get to recovery with adb reboot recovery and through android console with reboot recovery (when rooted ofc). Also download mode works great.
Things I have tried:
-flash again to JM2 and JM5 with re-partition checked (512 PIT)
-cleared cache+data through recovery
-factory reset through phone code (this also cleared the internal SD)
-took out the battery multiple times
-booted phone without sim
-flashed phone without sim
-changed CSC with phone code
-restore a nandroid backup of JM2. Recovery worked with this one when I took the backup
-there's no external flash card inserted
Soooo..does anyone have any idea about this kind of problem?

i had a similar problem after trying few ROMs. In my case, when i pres the key combi i get the boot logo and then few seconds later the screen goes black and then i see the boot logo again, and this goes forever. and then i tried pressing the same key combination simultaneously and once i see the boot logo i let go the power button and keep the vol up and home pressed, and then only it went into the recovery mode.
hope it works the same for you
Cheers

Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App

mmthabet: I had the exact same experience. Letting go of the power button when the logo appears lets me enter recovery.

or you may need to take out the battery first for a few seconds... after that, you can reinsert it back and try recovery mode...
at least this work for me...

Thanks for replies but none of the solutions work. The recovery mode button combination DID work for a few weeks, but then just stopped working.
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start. I have also tried to remove battery multiple times and once waited 30 mins before re-inserting it.
Trust me, I'm not doing it wrong :s And recovery is working great through adb reboot recovery and shell.

Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Click to expand...
Click to collapse
More so a timing issue. Buttons not pressed at the same time.
I get it all the time for all combo's.
Just keep trying.

You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.

odyssey61 said:
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
Click to expand...
Click to collapse
this wont work, if you bricked the phone in a bad flash situation.
in times when this app works, you can easily do adb reboot recover
so this app still doesn't address the real issue of how to get the 3 buttons press hardware recovery mode

Laum said:
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start.
Click to expand...
Click to collapse
I release the buttons right when the first Samsung texts comes on the screen. It will take it to Recovery mode. I also had a "boot loop" few times, if I keep pressing the buttons all the time.
Have you tried release your fingers right in the first texts? I really don`t know what is exactly the right way to press the buttons, but this always have took it to Recovery.

Looks like my latest full wipe with *2767*3855# cured it. Flashed JM5-->full wipe-->samset1.9b-->samset kernel and now it works. It must've got stuck somehow in my previous JM5 installation.

I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!

Igor02 said:
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Click to expand...
Click to collapse
yes
adb reboot download
but it is dangerous, as you can not recover from a bricked state, if your flash is not compatible or if something went wrong with odin, etc.

I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.

arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time

AllGamer said:
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
Click to expand...
Click to collapse
Well I did just get the phone 2 days ago,
Had that problem the same day, discovered the fix two hrs of horror later

Same Problem here i contact samsung here in mexico and a technical aggent tell me if we make a repair our phones we need a jtag and this is so bad alllready contact many people jtag manufacturers in china and honkong trow alibaba.com and no luck don't have other source i try is contact to nspro and z3x and no support for this repairand only hope still have is a reply from the people in the forum SMTi Jtag Repair Tool
Its hard to me go to UK Samsung Service Center i'm in mexico like i said
and i'm waith for a solve this i;m so very sad
http://www.youtube.com/watch?v=g8AIvalzBvY

Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I usually release the power button on the boot screen first and then the other two buttons

arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
Any idea how long you waited? Been waiting 5 minutes, hasn't shut off. Mine's a Bell though so I'm guessing I won't have any luck.

The way i do it (no chance of doing it wrong and timing):
hold down+home and then also press the power button for a little more then 10 seconds (so all 3 buttons for 10 seconds). The phone will reset into download mode, never fails in whatever mode the phone originaly was..

S3 won't boot, load CWM, go into download mode...

Alright, so I have an i-747 (AT&T GS3) running AOKP Jellybean (8.28 build) with the KT747 kernel. I just tried to install Chainfire 3D using the automated installer, and when the phone rebooted, it stuck at the Samsung Galaxy S3 logo until I pulled battery. So I tried rebooting into CWM - same problem. And again with download mode. Even after pulling the battery for a good 5 minutes, nothing works. Am I bricked, or is there some fix for this?

If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

g2tegg said:
If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I made a nandroid just this afternoon, but I can't actually boot into CWM at all. As in, I turn on the phone (power+home+volume up), it gets to the Galaxy S3 logo and just hangs there. If I could get into CWM (or download mode) this would be about a 10 minute fix, but I'm kind of out of luck here.

Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.

HELP I have the same issue
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse

Hi, sorry to say but sounds like its bricked
Thanks

MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse
I doubt it's bricked if he got it into download mode. I'm sure he's flashed it and even got his wallpaper back up by now. Please let us know of you've managed to solve this or not MrPhantom.
Sent from my SGS3 i747m (Bell) on CM10 using TapaTalk2

delete post please

Curious?
I know its technically "Solved" but does anyone have any idea why this is happening? I have a Verizon GS3 and it's happening to me. I try to boot and it vibrates once and doesn't turn on. Recovery does the same thing. But going into Download mode works. Odin back to stock as we speak but I'm just curious what went wrong. I just did a clean install of a rom, set it all up (working at the time), set it down for the night and woke up to it like this.

rrrs444230 said:
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
Click to expand...
Click to collapse
Same thing happned to me but your not bricked. You can get into bolth download and boot mode easy
Here is how you do it.
RECOVERY MODE
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
[edit]Download Mode
Save that somewhere. Make sure do it right. I got stuck also and thought I couldn't get into recovery but I had to do it right (it hit recovery mode first try) I have learned that most people do it slightly wrong. Make sure follow directions
Download mode
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
To get out of Download Mode, simply press and hold the power button until the phone restarts
if helps hit thanks.
Just save that to a text file somewhere
I have also soft bricked when I deleted my rom once on accident. I dunno how I did it but I would get stuck at the TWRP screen. It wouldn't go to download or anything however when I plugged it into odin it saw it .... I even had a soft brick when screen went black from a bad boot animation and same thing.. and I had one bad soft brick where it took about 100 trys to get it into download mode (black screen) but odin detected it. I spent like 4 hours working on it.
I think
1. People don't follow directions correct (they do it a little wrong) which is enough if your phones messed up for it not to work.
when your phones normal it can get into recovery or download easy but when its sick you got to do it perfect.
2. I think something wrong with the phones (my s2 never had any issues in 2 years of owning it) S3 has tons of issues from usb, to bluetooth, to these soft bricks I have had)
3. Roms play a big part
4. I also think the way storage works in this new phone causes lots issues I dunno why just what I think
anyway Like I said now when I have a isssue I open text and read it and make sure I do it right and 95 percent of the time it was my fault I wasn't doing it right. K just my thoughts

when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different

phatchef1 said:
when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different
Click to expand...
Click to collapse
That's most likely cause you're not in the right section..: http://forum.xda-developers.com/forumdisplay.php?f=1708

[Q] issue after rooting Recovery Booting. Set Warranty Bit : Recovery loop

hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t

Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank

same prob
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
Same problem as OP, and I can not get into download mode either. If I do as above, it still goes on booting .

saeidzzz said:
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )

you are a life saver!
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
I thought I was going to have to factory reset my phone like other forums suggested and lose everything. Thanks to your suggestion I was able to get out of recovery reboot loop. Thank you!

Thanks for your help, you are a lifesaver lol! I saved so much money and time because of you. Have a great day

Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
But how to enter recovery it still says set warranty bit recovery

i am facing problem with set warranty bit: recovery in samsung J5 model...

samsung j5 500f
i have the same problem when i flash twrp recovery..any solution ????

Ghats normal
Sent from my SM-N900T using XDA-Developers mobile app

My Fix
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine

ulop3z said:
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
Click to expand...
Click to collapse
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs

Tmobilefan906 said:
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Click to expand...
Click to collapse
The phone is fine now, it was just stuck on the loop and spamming home was the only way out, its fine now I've had no problems and it boots up fine

This happens...
This happens to almost everyone at some point of time. There is no need to worry as you just need to flash recovery like TWRP or CWM. To shed some light on this issue... boot loops mainly happen when you uses the incorrect version of software with your ROM or stock firmware. By using youtube you can look at the videos of your phone model and find the recovery version number needed.
For anyone who has a Note 3 T-Mobile phone who is still stuck! I am willing to make a video to show how to fix this and provide all the firmware/version numbers + links in one bundled location to make it easier.
ALL PHONES ARE VERY specific... ONLY USE THE CORRECT FIRMWARE FOR YOUR MODEL PHONE
Again, if you have a Samsung Note 3 T-Mobile, model number SM-N900T and are still lost. Let me know so I can shot a video and bundle files needed.
---------- Post added at 08:44 AM ---------- Previous post was at 08:38 AM ----------
cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
Don't be scared by this... just choose the correct versions before blindly trying to install a ROM. Also, only use links from main sources if you dont fell like auditing the code!

Hi guys, sorry for might be late about helping you now years later... But recently I've found something interesting about fixing this issue.
*****
Fix: (100% working in Galaxy Grand Prime SM-G530H)
UPDATED: More detailed info!
# Before flashed Recovery or Root:
1. Root device using Odin or any other rooting known workaround.
2. Backup Recovery (optional), and Kernel using Rashr (available on PlayStore).
3. Flash Custom Recovery (TWRP), using Odin PC software or TWRP android app.
4. Flash backed-up Kernel.img file to Boot partition using TWRP install section.
5. Reboot system (It may take a few time to boot)
# After flashed Recovery or Root: (accidentally or without knowing)
1. Search online and download your exact Phone Stock Kernel.
2. Follow *before flashed* above ↑ from 3rd.
Bonus info:
Even after flashing TWRP, you might be able to Boot device yet, by going to TWRP → Advanced → Reboot system. (It bypass bootlooping to Recovery, while: “Set Warranty Bit : Recovery”).
That's all! Try at your own, then share it!

[Q] Note 3 wont reboot successfully after flashing CWM recovery

So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.

Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app

I cannot. I have the battery of the phone out right now. As soon as i put the battery in the phone, it tries to reboot into recovery without me even pressing the power button. Then it again shuts off and tries to restart every 2-3 seconds.
Lawful123 said:
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse

Just some additional info, I flashed CWM recovery through Rom Manager. After flashing it, it asked to reboot the phone. As soon as the phone rebooted, i started having this issue.

I'm in a similar situation. I used to be able to use the phone controls (power-home-Vol Up) to be able to go into recovery mode, but even that has stopped functioning. The only way to get the phone to boot normally after that is to pull battery, put the phone in download mode and then cancel download mode to boot up normally.

re: download mode
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I think the only way to get your phone into download mode now would be
to get a USB Jig from eBay or some online store.
They are under $5 bucks shipped.
Once you have that you would simply remove the battery from your
phone and then plug in the Jig before putting the battery back in.
The usb Jig is basically meant to be used for those
phones which will not go into download mode any
other way.
I have a Jig and as soon as it's plugged into the phone when the phone
is powered down it goes into download mode within 2-3 seconds.
Soon as its in download mode you can remove the jig and start a
clean Odin flash of the official stock firmware for your phone.
Good luck!

https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot

Thanks for that USB Jig suggestion. I guess that is my last hope.
Sent from my SM-N900T using XDA Premium 4 mobile app

Per suggestion from Misterjunky, I've now been successful in installing the Stock Tmobile 4.4.2 NB4 formware that I downloaded from sammobile. I used Odin 1.85 to install that on the Note 3. So far, the phone looks functional again.

So pressing power, vol down and menu doesn't get you into download? Have you tried holding them for at least 30 seconds?

I had this happen to me when I messed up flashing twrp. Pull the battery for 30 minutes, then put the battery in while holding power home and vol down.
That's what worked for me.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T

I encountered the same issue after flashing CWM Touch to my SM-N900T (Note3-Aus) running Infamous Rom on the BioShock kernel. After being stuck in the loop for a fair while I removed the battery, went to grab a cup of tea before completely raging at the phone, went back and put the battery back in. The phone did not boot automatically this time, a good sign I thought to myself. I then went on to hold down VolumeDown + Home + Power to see if I could get into download mode. I successfully booted into download mode and selected the reboot option. My Note3 then went on to boot successfully. Hopefully this helps :fingers-crossed:

I recently had the same issue......heres step by step:
1. with the battery OUT, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. open kies. and at this point you'd want to restore back sto stock as follows:
4. go to tools, firmware upgrade and intialisation
5. follow the on screen direction and then just wait.
6. if you want to re root, then feel free to once the phone is up and running.
i have tried this method so many times and hasnt failed me yet. IF this has helped anyone, please press the thank you button! :laugh::fingers-crossed:

I resolved the problem by flashing the phone back to T-mobile stock using Odin. In my case, the recovery was corrupted and hence the issue. After flashing back to stock, I was then able to root and install a TWRP recovery successfully.

hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I'm having the same problem, what I do is take out the battery put it back in and try to turn on the phone on recovery mode, and it will give me the option to restart the phone. Hope it works

Same problem has happened to me, do you guys know if the jigs are universal? The ones I see on amazon and ebay dont list the note 3 at all so I just want to be safe. Since upgrading to nf9 the recoveries have given me major issues, TWRP was really buggy so I switched back to CWM and this happens.
Scratch that, just rebooted. I would still like to know if its universal though, in case this happens again. Doesnt hurt to be prepared

You're a life saver, Thanks a ton
atlzonly89 said:
i recently had the same issue......heres step by step:
1. With the battery out, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. Open kies. And at this point you'd want to restore back sto stock as follows:
4. Go to tools, firmware upgrade and intialisation
5. Follow the on screen direction and then just wait.
6. If you want to re root, then feel free to once the phone is up and running.
I have tried this method so many times and hasnt failed me yet. If this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
Click to expand...
Click to collapse
you're awesome, thank you so much

Note 3 (sm-n900w8) will not go into recovery mode after CWM Flash
Helllo Sorry if this is not in the proper place I have not had much experience posting.
my Phone is a Note 3 (sm-n900w8) Canada (rogers)
running Lollipop 5.0
base version n900w8vlu2doc4
kernel 3.4.0-4348112
[email protected]#1
build number ..... lrx21v.n900w8vlu2doc4
ap: n900w8vlu2doc4
I Flashed CF Auto root first (CF-Auto-Root-hltecan-hlteub-smn900w8.tar) All went well and I got root access
Then I Flashed CWM ( n900-cwm-recovery-6.0.5.0-kk_L5.0(0812)) and all seemed to go well but .. I could not get into
recovery mode. when I pressed vol up + Home + power key at the same time it went directly to download modes second screen..( the one that is ready for you to hit start on odin.) ...
I was able to reboot and try several times with the same result.
I then went and got the CWM app and tried to enter form there to only get stuck on the download mode without being able to reset.
then I flashed the CWM again and was back to being able to reset but not being able to get into recovery mode.
I updated CWM recovery setup from the app to the latest 6.0.4. and then tried to back up my current rom ... this let to a boot loop that said something like ..... Kernel is not seandroid enforcing...
once again I was able to get into download mode and had to re flash CWM and get back to my original problem ... not being able to get into download mode
Can anyone help me figure this out
Thanks

[Q] T-Mobile Note 3 stuck in a auto-restarting, recovery bootloop

Hello, I am new to these forums. I mostly registered for this one specific problem.
I'm pretty sure the phone isn't hardbricked, but I tried rooting my T-Mobile Galaxy Note 3 (4G LTE version) with Klingo. After that, it said the root was successful and the phone immediately restarted itself. However, it was then stuck in a bootloop and it just kept restarting itself. The phone turns on, and then the "Samsung Galaxy Note 3" logo appears with "RECOVERY....." in blue in the top left corner, and directly under that it says "Set Warranty Bit: recovery" in yellow. Then after about 3-4 seconds it shuts off, then about 2 seconds later it restarts automatically and just keeps looping like that.
T-Mobile said they would replace the phone, and they'll be sending me a new one as soon as the old one reaches the return center. Obviously I didn't tell them what I actually tried to do. In case they're able to find out what I tried to do and end up sending my old one back, I just wanted to ask this question preemptively so I might have an idea of what to do.
I HAVE TRIED BOOTING INTO RECOVERY MODE AND DOWNLOAD MODE. No button combinations cause anything to happen. The only thing that stopped the auto-restarting and looping was taking the battery out. Upon putting the battery back in, it will stay off until I manually turn the phone on again, where it will then continue to auto-restart and loop itself.
I do not have the phone right now because I sent it to a return center after spending a few hours searching online for answers and talking to T-Mobile on the phone. But if any of you have any ideas it would certainly be a great help if the worst case scenario ends up happening. Thanks for any potential solutions!

JasePK said:
Hello, I am new to these forums. I mostly registered for this one specific problem.
I'm pretty sure the phone isn't hardbricked, but I tried rooting my T-Mobile Galaxy Note 3 (4G LTE version) with Klingo. After that, it said the root was successful and the phone immediately restarted itself. However, it was then stuck in a bootloop and it just kept restarting itself. The phone turns on, and then the "Samsung Galaxy Note 3" logo appears with "RECOVERY....." in blue in the top left corner, and directly under that it says "Set Warranty Bit: recovery" in yellow. Then after about 3-4 seconds it shuts off, then about 2 seconds later it restarts automatically and just keeps looping like that.
T-Mobile said they would replace the phone, and they'll be sending me a new one as soon as the old one reaches the return center. Obviously I didn't tell them what I actually tried to do. In case they're able to find out what I tried to do and end up sending my old one back, I just wanted to ask this question preemptively so I might have an idea of what to do.
I HAVE TRIED BOOTING INTO RECOVERY MODE AND DOWNLOAD MODE. No button combinations cause anything to happen. The only thing that stopped the auto-restarting and looping was taking the battery out. Upon putting the battery back in, it will stay off until I manually turn the phone on again, where it will then continue to auto-restart and loop itself.
I do not have the phone right now because I sent it to a return center after spending a few hours searching online for answers and talking to T-Mobile on the phone. But if any of you have any ideas it would certainly be a great help if the worst case scenario ends up happening. Thanks for any potential solutions!
Click to expand...
Click to collapse
I have no idea what the issue is, but it seems you might not have a recovery installed on the phone. Try this:
Hold power + volume to go into bootloader (I know you said you tried various combinations, but make sure you're doing it correctly.).
Go into fastboot
flash a new recovery image from (TWRP or CWM) (how to: https://sites.google.com/site/tomsgt123//adb-fastboot)
reboot and go into recovery, then use adb sideload to flash a new ROM.
Source: http://www.reddit.com/r/htcone/comments/1rkvy0/help_stuck_in_bootloop_without_access_to_recovery/
I have no idea whether this will work, but it's worth a try. Please don't blame me if your phone gets even more messed up than it already is.

Techngro said:
I have no idea what the issue is, but it seems you might not have a recovery installed on the phone. Try this:
Hold power + volume to go into bootloader (I know you said you tried various combinations, but make sure you're doing it correctly.).
Go into fastboot
flash a new recovery image from -snip-
reboot and go into recovery, then use adb sideload to flash a new ROM.
Source: -snip-
I have no idea whether this will work, but it's worth a try. Please don't blame me if your phone gets even more messed up than it already is.
Click to expand...
Click to collapse
Thank you so much. I will definitely try this. I was also getting replies elsewhere that if I can see the logo, I should be able to get into download mode where I could then flash the stock ROM. Honestly, it does seem like I somehow may not have a recovery installed.
If they send me my old phone back I will definitely give this a try. Thanks a bunch! And don't worry, I won't hold you accountable haha.

JasePK said:
Thank you so much. I will definitely try this. I was also getting replies elsewhere that if I can see the logo, I should be able to get into download mode where I could then flash the stock ROM. Honestly, it does seem like I somehow may not have a recovery installed.
If they send me my old phone back I will definitely give this a try. Thanks a bunch! And don't worry, I won't hold you accountable haha.
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc; this did not work for me), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could inform them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )

cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc; this did not work for me), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could inform them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
So basically your problem was fixed by keeping the battery out for an extended period of time? Did you get the same problem as I did, with the phone trying to boot into recovery constantly and failing due to having no recovery image?
I never kept the battery out for more than 2-3 minutes, so that's another option for me to try if they send my old phone back and the first guy's suggestion doesn't work.

JasePK said:
So basically your problem was fixed by keeping the battery out for an extended period of time? Did you get the same problem as I did, with the phone trying to boot into recovery constantly and failing due to having no recovery image?
I never kept the battery out for more than 2-3 minutes, so that's another option for me to try if they send my old phone back and the first guy's suggestion doesn't work.
Click to expand...
Click to collapse
Yes, I had the exact problem. I tried to have the battery out for 10 minutes, and also ran out of battery during a nightly discharge. Still I could not get it to work. The only way was to leave the battery out for several hours. Beats me, but it worked.
Having bricked a device completely before, I am confident that your phone will be able to get fixed. This isn´t even semi-bricked
Good luck - let me know what happened!

cdresor said:
Yes, I had the exact problem. I tried to have the battery out for 10 minutes, and also ran out of battery during a nightly discharge. Still I could not get it to work. The only way was to leave the battery out for several hours. Beats me, but it worked.
Having bricked a device completely before, I am confident that your phone will be able to get fixed. This isn´t even semi-bricked
Good luck - let me know what happened!
Click to expand...
Click to collapse
Thanks so much to both of you. I feel relieved now no matter what happens. Will post the results when I've reached the end of this ordeal!

JasePK said:
Thanks so much to both of you. I feel relieved now no matter what happens. Will post the results when I've reached the end of this ordeal!
Click to expand...
Click to collapse
I tried to flash latest cwm again and got the same loop. I could narrow it down to 30 min without battery :laugh:

cdresor said:
I tried to flash latest cwm again and got the same loop. I could narrow it down to 30 min without battery :laugh:
Click to expand...
Click to collapse
When that happens and you go back to normal, are you able to access recovery mode afterwards if you want to? Or does trying to cause the same loop? Is it wise to re-flash the stock firmware just to be safe?

JasePK said:
When that happens and you go back to normal, are you able to access recovery mode afterwards if you want to? Or does trying to cause the same loop? Is it wise to re-flash the stock firmware just to be safe?
Click to expand...
Click to collapse
I never dared to try. But since I always used Windows under Mac (Parallells) or the fact that I used Windows 7 or 8, I tried to flash CWM on a native Windows XP PC today and it worked. So now I have a custom ROM working which I never thought would happen :laugh:
Sorry I did not try to access recovery before so you would know
Cheers,

cdresor said:
I never dared to try. But since I always used Windows under Mac (Parallells) or the fact that I used Windows 7 or 8, I tried to flash CWM on a native Windows XP PC today and it worked. So now I have a custom ROM working which I never thought would happen :laugh:
Sorry I did not try to access recovery before so you would know
Cheers,
Click to expand...
Click to collapse
No that's alright, I just wanted to know if it was something I should avoid. :laugh: I'll use Odin to flash the official firmware back on regardless.

I had this happen to me, what had occurred was that the efs was corrupt. Here's the fix:
http://forum.xda-developers.com/showthread.php?t=2507403
Now to implement this fix, you must first be able to get into download mode. To do so:
1. Pull the battery
2. Wait 10-20 secs
3. Reinsert battery WHILE holding power button and (volume down + home???, whatever the key combination is)
5. Phone will boot directly to download mode, no logo
6. Flash twrp via odin
7. Phone will reboot into bootloop again
8. Repeat steps 1-4 except this time use the key combination for recovery
9. You must now use adb and push the file I linked to earlier
10. Then without rebooting you must flash it
11. Reboot and problem solved

Fixed issue with continuous recovery boot
So, this issue was somewhat perplexing, and while the information shared was hopefully valuable to some, it took me about 2 minutes to
fix this and get back into download mode.
Take the battery out of the device, then plug the device into USB (If you're having same issue I was device will not show charging or turn on when plugged in.) Then with the device plugged in to usb and the battery out, hold down the Download mode combination Vulume +, Home and Power, then simultaneously slide in the batter, the phone will boot into download mode and you can get back to stock.
Hope this helped! If it did, leave a thanks.

twill1987 said:
So, this issue was somewhat perplexing, and while the information shared was hopefully valuable to some, it took me about 2 minutes to
fix this and get back into download mode.
Take the battery out of the device, then plug the device into USB (If you're having same issue I was device will not show charging or turn on when plugged in.) Then with the device plugged in to usb and the battery out, hold down the Download mode combination Vulume +, Home and Power, then simultaneously slide in the batter, the phone will boot into download mode and you can get back to stock.
Hope this helped! If it did, leave a thanks.
Click to expand...
Click to collapse
This is exactly what I posted above lol

LOL Sorry. When I flash the TWRP file it just rebooted the phone back into the Hyper Drive Rom I'm using, did it do the same for you?

Thanks to everyone who has provided information and tried to help me! Thankfully, T-Mobile simply sent me a new phone. However, I'm definitely going to keep this topic bookmarked for future reference. This seems to be a rather uncommon problem, considering I had to make a topic to find a solution since all of my searches didn't give me any results.
Thanks again to everyone!

twill1987 said:
So, this issue was somewhat perplexing, and while the information shared was hopefully valuable to some, it took me about 2 minutes to
fix this and get back into download mode.
Take the battery out of the device, then plug the device into USB (If you're having same issue I was device will not show charging or turn on when plugged in.) Then with the device plugged in to usb and the battery out, hold down the Download mode combination Vulume +, Home and Power, then simultaneously slide in the batter, the phone will boot into download mode and you can get back to stock.
Hope this helped! If it did, leave a thanks.
Click to expand...
Click to collapse
U r My neww Mirical worker I messed up a Mobile Odin Flash At work today trying to get the newish NE6
couldnt get it to boot into download after the screw up but read this this morning nd after trying everything else it worked perfect
thank you thank you

I'm having the same problem with my TMobile Note3 after using Kingo after upgrading via Kies to the latest Firmware. The only difference is my phone immediately starts rebooting as soon as I put the battery back in. It doesn't appear that any keys stop this and the USB isn't recognized by my computer in time before the reboot cycle starts.
Is there anything else to try other than sending the phone back for warranty replacement?
tim

Yeah Kingo has given me nothing but trouble, I'd steer clear of that software. I'm assuming you have no access to recovery mode? I have had that issue before on an S3 and was able to finally get it into download mode, but the battery being inserted immediately boots the phone up. So what you have to do is 1. Take battery out and unplug usb cable. 2. Plug USB cable in and Hold download mode buttons with BATTERY OUT (vol+, home and power) 3. insert battery simultaneously while holding buttons down, phone will boot up.. After holding down for about 10 seconds phone will manually reboot, 4. When screen shuts off (potentially vibrates) release download mode buttons, then IMMEDIATELY press and hold download mode buttons again (must perform this step FAST, the key is to do it right before the screen turns on if you can.) 5. The manual boot you've performed should allow you to trigger download mode. I was eventually able to get this to work (about 3 tries. ) I believe your download mode is still intact, you just have to use this method to access it. Remember that because your phone atuo boots with battery inserted download mode will only be available by manual reboot not battery insert.
Give thanks if I assisted you.. Your phone isn't a hard brick so Jtag service should be unnecessary at this juncture.
---------- Post added at 05:09 AM ---------- Previous post was at 05:01 AM ----------
Awesome!! Glad I could be of such assistance
---------- Post added at 05:13 AM ---------- Previous post was at 05:09 AM ----------
R187J said:
U r My neww Mirical worker I messed up a Mobile Odin Flash At work today trying to get the newish NE6
couldnt get it to boot into download after the screw up but read this this morning nd after trying everything else it worked perfect
thank you thank you
Click to expand...
Click to collapse
Awesome man!! Glad I could be of assistance!!
Give thanks/thumbs up!

I read on many posts and comments that everyone is able to boot in download mode. My Note 3 just stuck on recovery boot and I can't get it to boot in download mode. I tried all of the suggestions about pressing three buttons, removing battery etc.
Does anyone know solution for when you can't get into download mode?
Thanks