[Q] bricked phone while flashing custom rom - Galaxy Note 8.0 (Tablet) Q&A, Help & Troubleshooti

was stuck on samsung logo . now the yellow triangle..device wont go into the logo menu again (the restarting part. stuck with yellow triangle telling me to go to recovery)
i tried flashing roms which failed to flash.. i then just restored my tablet
i had access to recovery till i tried installing a boatloader required for another stock rom on the rom section. that lead to the yellow triangle.
so no access to recovery.. i am currently in the middle of emergency recovery..and downloaded stock rom to flash through odin if that doesnt work
i am stressed out right now.. need my tab for school next week.. bricked it yesterday.. worked all day and night .. now i have odin to use after kies doesn't work
i was using twrp 2.5
the roms just wouldnt flash and i restored the system.. about 3 times i tried flashing and failed. then restored.. but stuck at logo
what to do from here?
the kies is at around 50% downloading stupid update of the software..for the note 8

sarmadpak10 said:
was stuck on samsung logo . now the yellow triangle..device wont go into the logo menu again (the restarting part. stuck with yellow triangle telling me to go to recovery)
i tried flashing roms which failed to flash.. i then just restored my tablet
i had access to recovery till i tried installing a boatloader required for another stock rom on the rom section. that lead to the yellow triangle.
so no access to recovery.. i am currently in the middle of emergency recovery..and downloaded stock rom to flash through odin if that doesnt work
i am stressed out right now.. need my tab for school next week.. bricked it yesterday.. worked all day and night .. now i have odin to use after kies doesn't work
i was using twrp 2.5
the roms just wouldnt flash and i restored the system.. about 3 times i tried flashing and failed. then restored.. but stuck at logo
what to do from here?
the kies is at around 50% downloading stupid update of the software..for the note 8
Click to expand...
Click to collapse
That's suck, download your firmware from sammobile.com and make sure you get correct firmware labelled by country. then open up odin and load the firmware and put your tab into download mode and flash. If you're not sure how to use odin use guide from general section

Related

[Q] flashing with heimdall ?

hi,
i have a Gio S5660 that i bricked trying to sim unlocking it before putting it on sale.
the device can get into Download mode (no recovery mode though) but Odin 4 doesn't flash anything anymore, tried different roms (stock, moded, froyo, GB) nothing works, Odin 4 says PASS but after rebooting the screen keeps on blinking the ugly Samsung logo.
i tried to make a Heimdall flashing package but when i try to load a rom into the packager i get an error that says no Firmware.xml found.
is it even possible to use Heimdall or other Odin versions to flash a Gio, if so how do u make a package for that ?
supermario00 said:
hi,
i have a Gio S5660 that i bricked trying to sim unlocking it before putting it on sale.
the device can get into Download mode (no recovery mode though) but Odin 4 doesn't flash anything anymore, tried different roms (stock, moded, froyo, GB) nothing works, Odin 4 says PASS but after rebooting the screen keeps on blinking the ugly Samsung logo.
i tried to make a Heimdall flashing package but when i try to load a rom into the packager i get an error that says no Firmware.xml found.
is it even possible to use Heimdall or other Odin versions to flash a Gio, if so how do u make a package for that ?
Click to expand...
Click to collapse
After flashing with odin and get in bootloop, press the power button for 10 seconds, after restart press home and power until get in to recovery, there should factory reset and the most important - fix rfs or something, can't remember now exactly, the phone will reboot automaticaly and you have to wait some time to boot.
Which method did you try to unlock it with?
HEllo,
Same problem, keep blinking trying to boot with Samsung white letters.
FR
What, and how EXACTLY did you tried to flash with odin? (Which rom, Onepackage/multipackage, tar/md5...?)
Hello,
Still fighting to bring it into life.
Well the problem began when unlocking with the thread instructions:
http://forum.xda-developers.com/showthread.php?t=1204705
Everything seemed to go as expected but...
After that it never rebooted well, still in cycle on www.samsung letters firs screen.
Even so i tried to flash it with ODIN into Stock Rom 2.3.5 and the same problem.
Sometimes i still can have the "Recovery Mode" and flash other versions, i have the PASS message ok, but when reboot... same problem.
And with the Oneclick Unbrick recovery it fails...
Really worried abou this... nice brick!
Thanks to all that are trying to help!
At the beginning of the process it hads the 2.3.3 version locked to Vodafone.
Maybe you just misspoke, but you can't use Odin if your phone is in recovery mode. It has to be in downloading mode.
In my opinion:
1. Boot into recovery (are you using cwm?)
2. Do a factory reset+wipe everything (incl. dalvik cache)
3. Turn off the phone
4. Download the latest ROM from here: http://forum.xda-developers.com/showpost.php?p=16979769&postcount=547
(S5660XXKS2)
5. Boot your phone into downloading mode
6. Flash with Odin (this is NOT "One package", you have to put everything in the right spot /boot, phone, etc/)
Hello again,
Yes i mean Download mode, i', flashing with ODIN but "one package Versions" i'm goin to try next your link already downloading.
Even if i can not unbrick it (wich is strange because i still can flash it) i must thans you very much for great cooperation!
Working...
You're welcome. When I bricked my phone, this is how I got it working again. I hope it works for you too.
Keep my posted...
Hello again,
Well just flashed again with ODIN (not One Package) and last firmware (2.3.5) and the report is that at the end i have the PASS confirmation but phone keeps flashing and does not reboot alone as supposed (waited 15 mn).
Unplug USB cable, battery out, battery in, power on and it returns to its "preference": alternates between dark scredn and those White letters saying SAMSUNG... infinite loop.
This is strange, i'm tired of seaching everything and this is not a normal beahaviour for this procediure.
I can follow all the steps... and at the final... same result.
Don't really know what to do next.
Once more, thanks for all!
Fernando
I'm sorry it didn't work. I have one last suggestion. The firmware you just tried to flash has a few md5 files. Rename them to tar, an extract them. The files you will find inside are the ones you can flash with Heimdall (data.rfs, system.rfs, etc).
I can't tell you much more, because I never used it (just googled a bit right now), but you can probably find a few tutorials about the subject.
Hello,
The fight continues and for all that i've read so far i almost sure that someting happend with the EFS partition.
I think that, case possible, the way is trying to flash an EFS new partition.
Someone knoes ho to do that?
Thanks!
descobrindo said:
Hello,
The fight continues and for all that i've read so far i almost sure that someting happend with the EFS partition.
I think that, case possible, the way is trying to flash an EFS new partition.
Someone knoes ho to do that?
Thanks!
Click to expand...
Click to collapse
please give more information about stuck on logo (ex: logcat)
and dont play with EFS partition. its very dangerious.
it can really bricked your phone
When you can go to recovery mode with your gio you should flash ext4-formatter.zip(download,put on sdcard,go to recovery find `installzip from sdcard` and flash it.
the internal phone memory has to be in ext4 format ,if not you have the above problems.
after flashing you can install a rom.
By the way,i tryed flashing with heimdall-frontend ,i think it can ,but you have to rename it to a .tar gz file it wil be compiled automatic adding it to heimdall,but...than it says
`firmware.xml is missing from the package` , so...you have to ad(make or edit an existing one,and insert it in the package) that file... which contains name rom ed , than it probably works...
What is heimdall?
sort of odin but odin doesnt run on linux,for flashing
SOLUTION!!
Hey , I figured out a while back how to sort this out... Odin works,The reason though it bootloops is just that the \Data and \Cache Partitions are still in Ext4 Format... Stock Rom uses RFS... So The Solution is - After you Flash Your Stock Rom Via Odin, after it says "PASS" , Unplug USB then Reboot into the stock recovery mode by Holding HOME and POWER Button , Then format Cache and Then Wipe Data/Factory Reset (By doing this it formats back to RFS and then it can operate) ... then reboot to system ... And Voila , It works!!!! (Always works for me)... Hope this Helps Just Remember to USE ODIN (Heimdall apparently not Gio Supported)

[Q] I'm stuck. Have tried everything.

Hi all,
I'm on Rogers GS3 (i747m)
I've searched and searched. I cannot find a fix to my problem.
Last night I downloaded the AOKP 10.16 update and was trying to flash it above my 10.03.
It gave me an error while flashing, but then the phone would boot and stay stuck at the glowing samsung logo.
I downloaded the stock rogers rom and tried to flash it using oding. Same thing would happen, glowing samsung logo.
I was finally able to flash a recovery image but now it won't recognize my internal sd and keeps telling me that there was an error mounting external sd. I can't format /data because of that.
When I try to flash another recovery through Odin 3.07, it keeps telling me "Odin downloader has stopper working." With Odin 1.85, it says "Odin communicator has stopped working."
I'm about to give up. Will keep searching. But I'm losing hope at this point.
have you tried this http://forum.xda-developers.com/showthread.php?t=1828152
http://forum.xda-developers.com/showthread.php?p=28175077
Try this toolkit. It may help you. You can also try to flash twrp recovery. And do you have a nandroid backup?
Sent from my SGH-I747 using xda app-developers app
any solution
hello, has anyone found a solution to this "odin has stopped working"? i have a gnex that has bad "volume down" and "power" buttons. so if my phone dies i usually charge it and then flash a recovery via odin to boot it back up without having to redo my whole phone. now everytime i try to use any version odin, the program crashes. i've seen a lot of people with this issue lately but since i do not have working buttons, odin is the only way i can boot my phone. please help ps. i know i don not have a s3 but i am going through the same issue and i need the odin to work so i can fix a s3 as well.
tswtech2 said:
hello, has anyone found a solution to this "odin has stopped working"? i have a gnex that has bad "volume down" and "power" buttons. so if my phone dies i usually charge it and then flash a recovery via odin to boot it back up without having to redo my whole phone. now everytime i try to use any version odin, the program crashes. i've seen a lot of people with this issue lately but since i do not have working buttons, odin is the only way i can boot my phone. please help ps. i know i don not have a s3 but i am going through the same issue and i need the odin to work so i can fix a s3 as well.
Click to expand...
Click to collapse
that used to happen to me what version are you on?? ill give you the attachment that worked for me
2oublethink said:
Hi all,
I'm on Rogers GS3 (i747m)
I've searched and searched. I cannot find a fix to my problem.
Last night I downloaded the AOKP 10.16 update and was trying to flash it above my 10.03.
It gave me an error while flashing, but then the phone would boot and stay stuck at the glowing samsung logo.
I downloaded the stock rogers rom and tried to flash it using oding. Same thing would happen, glowing samsung logo.
I was finally able to flash a recovery image but now it won't recognize my internal sd and keeps telling me that there was an error mounting external sd. I can't format /data because of that.
When I try to flash another recovery through Odin 3.07, it keeps telling me "Odin downloader has stopper working." With Odin 1.85, it says "Odin communicator has stopped working."
I'm about to give up. Will keep searching. But I'm losing hope at this point.
Click to expand...
Click to collapse
You arent hard bricked dont give up YOUR PHONE IS STILL ALIVE xD
This will keep all your data!
Unbrick:http://www.youtube.com/watch?v=ypmqJbZqOaU&feature=relmfu
Obviously you'd want to root again (;
Root:http://www.youtube.com/watch?v=XoEVDgjTTdg&feature=plcp
2oublethink said:
Hi all,
I'm on Rogers GS3 (i747m)
I've searched and searched. I cannot find a fix to my problem.
Last night I downloaded the AOKP 10.16 update and was trying to flash it above my 10.03.
It gave me an error while flashing, but then the phone would boot and stay stuck at the glowing samsung logo.
I downloaded the stock rogers rom and tried to flash it using oding. Same thing would happen, glowing samsung logo.
I was finally able to flash a recovery image but now it won't recognize my internal sd and keeps telling me that there was an error mounting external sd. I can't format /data because of that.
When I try to flash another recovery through Odin 3.07, it keeps telling me "Odin downloader has stopper working." With Odin 1.85, it says "Odin communicator has stopped working."
I'm about to give up. Will keep searching. But I'm losing hope at this point.
Click to expand...
Click to collapse
Whenever I get stuck at the Samsung logo boot animation, I reboot into recovery, factory reset, reboot into download mode and flash again with Odin. Works every time.
resrevni said:
Whenever I get stuck at the Samsung logo boot animation, I reboot into recovery, factory reset, reboot into download mode and flash again with Odin. Works every time.
Click to expand...
Click to collapse
The thing is he doesnt have to lose all his data
amzi said:
The thing is he doesnt have to lose all his data
Click to expand...
Click to collapse
i was using version 3.07 from the toolkit. yes , i was trying not to lose my data. after trying all night, i was able to load a stock image and bring my phone back. all data was lost but at least my phone is working. i guess i just need to stop being cheap and get another phone but, we all know the outrages prices guys charge for phones on craigslist. does anyone know if the gnex is available through google still?

Bootloops After ODIN back to Stock Firmware

Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error

[Q] After boot and samsung logo black screen. S3 SGH-I747M Kodoo Canada

I was told to put this question on this forum and I'm really hoping someone can help. My phone is in perfect condition and it would be a shame to have to throw it out:
I'm out of Ideas, please help me.
Here is my info:
Samsung galaxy s3 sgh-i747m from kodoo Canada. I had installed cyanogenmod through their installer over a year ago. I have been using it with my rogers sim with no problems. Less than 2 weeks ago my screen randomly goes black. I try pulling the battery. The samsung logo appears but then back to black but I can hear everything is working. I Try and boot into recovery and everything is black. I boot into download mode and everything looks fine. I try reinstalling cyanogenmod and then Samsung stock through kies and smart switch and every stock kodoo file I can find .
There is one of two things that happen.
If I install a stock below 4.4.2 I get fail in Odin 3.07 and this on download mode:
Odin Mode
Product Name: SGH-I747M
Current Binary: Samsung Official
System Status: Official
Qualcomm secureboot: Enable
Warranty Bit: 1
Bootloader AP SWREV: 2
SW REV Check Fail : Fused 2 Binary 1
If I install a stock rom with 4.4.2 or install from Smart Switch
Everything proceeds perfectly but upon reset I see the samsung logo and then nothing just a black screen with the chime in the background. Still can't boot into recovery. I only see the recovery in blue in the upper left corner but then nothing. I believe after all I've tried I must be on 4.4.2
I would greatly appreciate any help you can give me.
Probably a dumb question on my part but what is "smart switch"?
You can't install any ROM below KK if the phone had stock KK installed on a prior occasion.
I think smart switch is like a newer lighter kies but I could be wrong.
I'm not sure but I don't think I had stock kit kat installed, I think it might have been Jellybean. Is there any way to know for sure? The problem is through odin I would always get fail if I tried any stock rom below 4.4.2.
Odin is the best way to flash the phone with a stock ROM.
I have never used Kies so I can't comment on its effectiveness in restoring a phone.
What error are you getting in Odin when flashing an older ROM than Kit Kat?
What bootloader is on your phone? Have you tried flashing KK via Odin 3.07?
The error I get in Odin is just a red Fail after aboot and on my phone screen it says at the bottom SW REV CHECK FAIL: Fused 2 Binary 1. As for the bootloader, how do I find what my bootloader is?
Odin is failing because you are trying to flash a rom that is trying to downgrade the phone's current bootloader. The fact that the phone has a tripped the warranty bit indicates that it has at least a 4.3 bootloader and cannot be flashed with 4.1.1 or 4.1.2, maybe not even 4.3.
Install the Samsung phone info app from the play store to determine the bootloader. You could also try flashing the stock fob firmware via Odin.
I can't install the samsung info app because I cannot see anything on my screen after the samsung logo. Also I'm not sure what fob is but I tried all of these files with odin 3.07 and none of them brought my screen back to life. http://www.sammobile.com/firmwares/database/SGH-I747M/KDO/
Okay, try this:
download tar version of TWRP from here: https://dl.twrp.me/d2att/
download the latest CM11 for the d2lte and save it to an external sd card;
download CM11 gapps and save it to the external sd card with CM11;
place the sd card into the phone;
download Odin version 3.07;
boot the phone into download mode;
launch Odin and connect phone via USB cable;
uncheck everything in Odin except F.reset time;
flash TWRP in Odin;
when you see the word reset in the Odin status window, disconnect the USB cable, remove battery, replace battery, boot into TWRP, flash CM11, flash gapps;
reboot phone;
install Sansung info app.
So I did everything you listed and when I attempt to reboot into recovery, I see the samsung logo appear with a blue "recovery booting" in the top left corner of the screen. They stay on for maybe 1 second and then the screen is black. I'm starting to give up hope
Did you pull the battery after seeing the word "Reset" in the status window? Did you try flashing TWRP again?
audit13 said:
Did you pull the battery after seeing the word "Reset" in the status window? Did you try flashing TWRP again?
Click to expand...
Click to collapse
I did pull the battery out after seeing "reset" and still nothing. Why would flashing TWRP again help? I'll try it again tomorrow. Thanks for trying to help me out here.
Did you pull the battery, replace the battery, and try to boot into TWRP (not the ROM)?
audit13 said:
Did you pull the battery, replace the battery, and try to boot into TWRP (not the ROM)?
Click to expand...
Click to collapse
Yes I pulled and replaced the battery. Booting into twrp is still home, power and volume up at the same time, right? That's what I did but nothing.
So you see nothing on the screen after pressing the buttons? Try flashing cwm.
audit13 said:
So you see nothing on the screen after pressing the buttons? Try flashing cwm.
Click to expand...
Click to collapse
Yes nothing. After flashing TWRP Twice and removing and replacing battery. I boot into recovery. I see the samsung logo with recovery booting in small and blue in the top left corner and then immediately to complete black. I also tried with CWM and the same result.
Can you boot into recovery after flashing stock kit kat via Odin?
If not, it sounds like something may be wrong with the hardware.

Phone stopped working, no idea how to fix it now

I don't know what happened but all of a sudden my gs4 stopped working and I could only get it up to the logo before it rebooted again. I am a total noob so I don't have any developer apps or firmware or whatever. I tried using Kies but I get stuck on the serial number part as I have entered everything on the box and behind the battery with none of them working. Now I am trying to use Odin but I think I messed up my phone even more. On the box it says M919NUVUEMK5 so I downloaded the firmware with that same code but originally I had downloaded the NUVUFOK one and used that. So I followed the guide and used that NUVUFOK file, and it seemd to be working as the download bar on my phone was almost done, but then all of a sudden it failed. I figured that was the wrong firmware so I went back and got the MK5 one, but now when I try to do the same thing with this firmware the bar only loads a tiny bit and then stops. Also the phone won't start up properly after I tried this, now it says there is an issue with the firmware upgrade and I need to use recovery mode in Kies. I have no idea what to do or what I am even doing, all I want to do is get my phone working again.
If you live in the US, you can take it to Best Buy an they will use there software to get it working again. Its hell of a lot less work.
Reformat
Operation Ivy said:
I don't know what happened but all of a sudden my gs4 stopped working and I could only get it up to the logo before it rebooted again. I am a total noob so I don't have any developer apps or firmware or whatever. I tried using Kies but I get stuck on the serial number part as I have entered everything on the box and behind the battery with none of them working. Now I am trying to use Odin but I think I messed up my phone even more. On the box it says M919NUVUEMK5 so I downloaded the firmware with that same code but originally I had downloaded the NUVUFOK one and used that. So I followed the guide and used that NUVUFOK file, and it seemd to be working as the download bar on my phone was almost done, but then all of a sudden it failed. I figured that was the wrong firmware so I went back and got the MK5 one, but now when I try to do the same thing with this firmware the bar only loads a tiny bit and then stops. Also the phone won't start up properly after I tried this, now it says there is an issue with the firmware upgrade and I need to use recovery mode in Kies. I have no idea what to do or what I am even doing, all I want to do is get my phone working again.
Click to expand...
Click to collapse
Hello. You will need to reformat your device so odin can recognize it. This can be done by using odin to flash a custom recovery like TWRP. The download link for that custom recovery is: https://dl.twrp.me/jfltetmo
Once you have that downloaded open odin and select AP option. Browse to where you saved TWRP and select it. Now proceed with flashing like normal. after its done flashing turn off the device.
After it is completely off hold the power button and volume up button simultaneously until you see the blue words on the top right corner of the boot logo screen.
Now you are in the twrp custom recovery menu. Go to Wipe > Advanced Wipe then select everything except for external sd, USB, and internal storage.
Once it is complete formatting turn the phone off again and boot back into download mode. Now you can reflash the correct firmware for your phone. I recommend using this firmware instead since it is a whole image rather than an incremental update. After flashing this your phone will reboot, give you the loading android logo and then the phone will start up once again! Good luck
The phone is giving the firmware error message because you tried to flash an older firmware to the phone.
Download the latest firmware for your phone and reflash it using Odin and the original Samsung USB cable.
AndroidInitiate said:
Hello. You will need to reformat your device so odin can recognize it. This can be done by using odin to flash a custom recovery like TWRP. The download link for that custom recovery is:
Once you have that downloaded open odin and select AP option. Browse to where you saved TWRP and select it. Now proceed with flashing like normal. after its done flashing turn off the device.
After it is completely off hold the power button and volume up button simultaneously until you see the blue words on the top right corner of the boot logo screen.
Now you are in the twrp custom recovery menu. Go to Wipe > Advanced Wipe then select everything except for external sd, USB, and internal storage.
Once it is complete formatting turn the phone off again and boot back into download mode. Now you can reflash the correct firmware for your phone. I recommend using this firmware instead since it is a whole image rather than an incremental update. After flashing this your phone will reboot, give you the loading android logo and then the phone will start up once again! Good luck
Click to expand...
Click to collapse
I downloaded it and it worked but now can't get past the "blue words" part. When trying to go into recovery it gives me either of two screens, one says "system software not authorized by samsung has been found on your phone." with red words "secure fail: kernel" or the blue words show up followed by red words that say "recovery is not seandroid enforcing" and then yellow words "set warranty bit: recovery". the phone is still resetting and freezing randomly.
Operation Ivy said:
I downloaded it and it worked but now can't get past the "blue words" part. When trying to go into recovery it gives me either of two screens, one says "system software not authorized by samsung has been found on your phone." with red words "secure fail: kernel" or the blue words show up followed by red words that say "recovery is not seandroid enforcing" and then yellow words "set warranty bit: recovery". the phone is still resetting and freezing randomly.
Click to expand...
Click to collapse
you are using the T-Mobile Samsung Galaxy S4 right?
AndroidInitiate said:
you are using the T-Mobile Samsung Galaxy S4 right?
Click to expand...
Click to collapse
Yes it is the SGH-M919N model.
Operation Ivy said:
Yes it is the SGH-M919N model.
Click to expand...
Click to collapse
You need to boot into recovery holding volume up and power button simultaneously. Once your in recovery mode format it. then you can reflash stock firmware.

Categories

Resources