Hey guys im not sure what is going on with my phone but i cant seem to drag files between both my storages on my computer or on a file explorer app! I have tried using MTP & PTP but both fail on me and i get an error saying "the device has either stopped responding or has been disconnected". I can delete files and download files to my phone but i cant transfer over anything! i need help!
Should i consider doing a factory reset on twrp? I don't think i messed around with anything on my phone but in the event that i did would wiping everything on TWRP fix that?
Thanks Guys!
No need to factory reset, restart your phone and computer and try a different usb port.
Omarley01 said:
No need to factory reset, restart your phone and computer and try a different usb port.
Click to expand...
Click to collapse
Ive tried on many different computers already and the same thing keeps on happening
What software are you on?
Related
As the title says; all of a sudden I cannot drag & drop folders from phone to PC. It starts transferring and it either stops without anything moving over or stops after 2-3 folders. Need to make a back-up of CWM & TiBu so I can format everything and do a new, fresh install but, nada..
I had this problem as well. My fix was to turning off and on debugging sometimes helps as well as changing the modes for the USB connection from MTP to PTP and let the drivers install then change back to MTP and finaly keep awake in the dev options on the settings menu.
After all did all that mine hasn't had a problem again yet. I've also herd that you should plug it into a USB port that's not a hub/extra port on the case go for one of the USB ports on the back of your PC that are directly on the mobo.
Good luck.
same my problem http://forum.xda-developers.com/showthread.php?t=1460152
try reboot phone and transfer again
I have the same problem but it is only within clockworkmod folder. Any other folder or file copies with no issues over to my PC. Windows explorer crashes every time i attempt to move one of my nandroids over to my PC. I am rooted with the correct drivers.
Sent from my Galaxy Nexus using XDA App
~SonkuB~ said:
same my problem http://forum.xda-developers.com/showthread.php?t=1460152
try reboot phone and transfer again
Click to expand...
Click to collapse
Must have eventually done the trick, I managed to transfer the 4-5 folders I needed. Now fresh start of everything, I nuked it.
4u2nvinmtl said:
I had this problem as well. My fix was to turning off and on debugging sometimes helps as well as changing the modes for the USB connection from MTP to PTP and let the drivers install then change back to MTP and finaly keep awake in the dev options on the settings menu.
After all did all that mine hasn't had a problem again yet. I've also herd that you should plug it into a USB port that's not a hub/extra port on the case go for one of the USB ports on the back of your PC that are directly on the mobo.
Good luck.
Click to expand...
Click to collapse
Thanks guys!
Droid_Junky said:
I have the same problem but it is only within clockworkmod folder. Any other folder or file copies with no issues over to my PC. Windows explorer crashes every time i attempt to move one of my nandroids over to my PC. I am rooted with the correct drivers.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Try rebooting the phone a couple of times, did it eventually for me. At least I think that's what it was..
Hey everyone,
I've been having issues with the USB file transfer process with my SGS3.
For example, whenever I want to back up my titanium backup folder and nandroid backups to my computer's hard drive, the transfer would only transfer a few files and not all of the selected at once. I've tried using various methods of copying and still no luck.
I am having trouble backing up my phone to my computer because of this.
I am using the stock USB cable that came with the phone and the latest Samsung USB drivers are installed on said PC.
If anyone else has a similar issue or knows how to fix it so I can start flashing/updating new ROMs more frequently, please let me know.
Otherwise the phone is amazing and I have had experienced no other issues with it thus far.
Thanks!
dingalinglol said:
Hey everyone,
I've been having issues with the USB file transfer process with my SGS3.
For example, whenever I want to back up my titanium backup folder and nandroid backups to my computer's hard drive, the transfer would only transfer a few files and not all of the selected at once. I've tried using various methods of copying and still no luck.
I am having trouble backing up my phone to my computer because of this.
I am using the stock USB cable that came with the phone and the latest Samsung USB drivers are installed on said PC.
If anyone else has a similar issue or knows how to fix it so I can start flashing/updating new ROMs more frequently, please let me know.
Otherwise the phone is amazing and I have had experienced no other issues with it thus far.
Thanks!
Click to expand...
Click to collapse
When you're copying the files, is your phone set to mtp or ptp file transfer mode? (Assuming you're on stock Rom)
Yea I just had a problem with transferring files turned out the stock usb cable is just cheap garbage and another cable fixed me up
Sent from my SGH-I747M using xda premium
dingalinglol said:
Hey everyone,
I've been having issues with the USB file transfer process with my SGS3.
For example, whenever I want to back up my titanium backup folder and nandroid backups to my computer's hard drive, the transfer would only transfer a few files and not all of the selected at once. I've tried using various methods of copying and still no luck.
I am having trouble backing up my phone to my computer because of this.
I am using the stock USB cable that came with the phone and the latest Samsung USB drivers are installed on said PC.
If anyone else has a similar issue or knows how to fix it so I can start flashing/updating new ROMs more frequently, please let me know.
Otherwise the phone is amazing and I have had experienced no other issues with it thus far.
Thanks!
Click to expand...
Click to collapse
I gotta make a thread about this.
You didn't say what OS your PC is or S3 Carrier???. It makes a difference.
Go to Device Manager and tell me if you see Yellow Explamations?
For Win7 and probably Vista, and bell/rogers/At&t, download and reinstall these drivers.
(they are AT&T drivers but trust me...they work perfect for Rogers....and WITHOUT KIES INSTALLED!
BUT...They never quite install smoothly for me....6 PCs now.
So it may say "PROBLEM installing etc." but keep going.
Pull the usb cable out...wait a few seconds.... and re insert.
Check Device manager again.
If you still have problems....manually initiate a Windows Update while the usb is plugged in.
Pull the usb cable out...wait a few seconds.... and re insert.
If you have Xp...let me know. There are different issues.
I've been searching since yesterday since and have yet to see this issue. I flashed a ROM yesterday and now I can't copy to SD or internal. I don't even remember which ROM caused it I restored my backup before that happened and still can't copy. I can download a ROM on the phone and install it I just can't copy anything when connected to a PC. I've tried on Win7 and Win8 with no luck. I've formatted SD, tried a different cable, uninstalled/re-installed drivers and USB debugging is selected. I can copy from the phone to the computer but not from computer to phone. The only thing I can think of is flash back to stock and re-root and see if that fixes it.
This is the error I get when attempting to copy
The device has either stopped responding or has been disconnected
Click to expand...
Click to collapse
or you can also try different usb ports and if that doesn't work try running all the same troubleshooting steps on a different pc and see if there's any difference.
Sent from my Nexus 4 using xda premium
Try using the drivers from my signature on your Win7 machine.
Thanks for the suggestions :highfive:
I seem to have fixed it. I used the Samsung Galaxy S3 toolkit (http://forum.xda-developers.com/showthread.php?t=1746682)
and just did the root option (even though it was rooted already) and after that I was able to copy again There are still a couple of ROM zip files I couldn't copy so I am assuming that the files may be corrupted or something. I haven't been able to re-download them again to test out that theory though.
I've been trying to transfer the files I took from my Galaxy S4 and saved them to my computer, to my G3. When I connect the G3 to my computer, I only see 2 files in the "Internal Storage". It won't recognize my SD Card either. Is there a setting I may be missing, that will allow me to see other folders? I can't copy and paste anything to my Internal Storage. Thanks for your help.
AnaMayShun said:
I've been trying to transfer the files I took from my Galaxy S4 and saved them to my computer, to my G3. When I connect the G3 to my computer, I only see 2 files in the "Internal Storage". It won't recognize my SD Card either. Is there a setting I may be missing, that will allow me to see other folders? I can't copy and paste anything to my Internal Storage. Thanks for your help.
Click to expand...
Click to collapse
Try airdroid from play store
jaythenut said:
Try airdroid from play store
Click to expand...
Click to collapse
Hmmm...I tried to upload the pics from my desktop and I get this message. "Failed to upload. No write permission on sd card."
I have to turn on the camera mode for it to transfer. It won't recognize anything in MTP mode. :/
I wish I could do all this without using AirDroid. It won't show the phone in MTP, but in PTP it will, but only 2 folders on the whole phone, no sdcard. And I can't directly put anything on the phone.
I had a problem with my D855 MTP mode as well. Folders are all there, but some files are either missing, or reduced in size. I cannot copy them out to PC. In these folders, I also cannot copy files into them. What I did to resolve the problem, is to reboot the phone with USB cable attached to the PC. Then, before the phone can complete its boot up sequence, I will have some time to copy the files in and out. It is really quite troublesome.
MTP troubles?
This is what's worked for me (D850/at&t):
Install LG United Mobile driver for ADB support
Enable USB debugging in developer options on phone
Verify MTP mode is selected
Connect USB and accept RSA signature on phone
I know that ADB isn't particularly necessary for MTP, but in my experience with roms on the old Nexus (for which I used Google's ADB driver), it was a sure bet every time. gl
crasher said:
I had a problem with my D855 MTP mode as well. Folders are all there, but some files are either missing, or reduced in size. I cannot copy them out to PC. In these folders, I also cannot copy files into them. What I did to resolve the problem, is to reboot the phone with USB cable attached to the PC. Then, before the phone can complete its boot up sequence, I will have some time to copy the files in and out. It is really quite troublesome.
Click to expand...
Click to collapse
ae10u said:
This is what's worked for me (D850/at&t):
Install LG United Mobile driver for ADB support
Enable USB debugging in developer options on phone
Verify MTP mode is selected
Connect USB and accept RSA signature on phone
I know that ADB isn't particularly necessary for MTP, but in my experience with roms on the old Nexus (for which I used Google's ADB driver), it was a sure bet every time. gl
Click to expand...
Click to collapse
Thanks for the suggestions guys. But it seems like my phone refuses to be recognized in MTP mode. And only partially recognized in PTP. I think I may have to do a hard reset this weekend. :/
I went back to Best Buy yesterday and returned my phone and got another one. And now my file transfers work. I guess I had a defective phone. I'm glad everything got back to normal.
I also had the problem that I didn't see my SDcard, but when I disabled debugging mode I suddenly could
Hello
just recieved my brand new G3, flashed TWRP and CM 12.1. SNAPSHOT... well, after reboot I realized something must went wrong, because i cannot access either Internal Storage or SD card from my computer (Windows).
I only have read rights, but I cannot copy anything to the storage. When I try, it says "Device stopped communicating or has been disconnected"...
What should I do?!?! Someone please help :X I tried fixing permissions from TWRP, but no luck.
EDIT: this was supposed to be posted in Q&A, so please move the thread, thanks.
Hi
Make sure that your device is connected to your PC via USB and it is on MTP mode "transfer mode" and the report back
It is connected as MTP. Same with PTP.
EDIT: in the meantime I flashed GAPPS and now everything works correctly. Not sure where was the problem, sorry I freaked out about it, but everything seems to be working properly now... thanks