Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
Click to expand...
Click to collapse
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Click to expand...
Click to collapse
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
buhohitr said:
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
Click to expand...
Click to collapse
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
deV14nt said:
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
Click to expand...
Click to collapse
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
wha2do said:
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
Click to expand...
Click to collapse
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
wha2do said:
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
Click to expand...
Click to collapse
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
22sl22 said:
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Thanks - that was the post had been reading through - appears after the kitkat OTA, latest posts mentioned problems with SU when running the original CF-AUTO Root method (flashing autorootp600mj4.tar.md5). Wondering if flashing the "newer" CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5
would be best. At this point feel confident either way!
deV14nt said:
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
Click to expand...
Click to collapse
Yep, will be downloading TWRP v2.6.3.3 and flash it and SuperSU after rooting. After rooting, will be curious to see where I sit with superuser (sorry, reading the latest posts kind of muddy whether a SU app is already installed or not, lol)...
Thanks everyone for all the great input & help!!
Hi all, new to all of this. Please keep this in mind as you read this thread.
Well first of all I have been reading about Cyanogenmod and how it helps saves battery. I also wanted to use cputuner to overclock my phone a little. I have in the past rooted this phone and installed cputuner not knowing that it could damage your phone if you didn't have a custom kernel that supported overclocking. After I found that out I uninstalled it and unrooted in fear of damage to my phone. Anyways I have a few questions and was looking knowledge, resources, and help about a few things.
Questions:
Is installing a custom rom and things needed to install a custom rom possible with a PC?
Can I safely reroot my device since I unrooted through #SU?
What do I need to do besides reroot my device in order to install a custom rom? (Cyanogenmod)
Thanks in advance!
Other INFO:
My device is a Samsung Galaxy S3 I-747
Firmware 4.4.2 KitKat
Device was rooted before using towelroot but I unrooted using #SU.
.
Ok. To install cm with no computer use, I'd say the easiest way would be to get root again with towelroot. Then install flashify from the play store. use flashify to install a custom recovery. I prefer TWRP.
Next download cm rom and Gapps. Follow the installation instructions for the rom. Generally that's boot into recovery, wipe dalvik, cache, system, and data, flash rom, flash Gapps, then reboot. You can do this from the internal SD, it won't erase that when you wipe. However, an external SD can be really handy for getting out of a jam.
If you haven't done it, a little research on the forums here about backing up your efs might be in order before flashing roms. Hope you never need it, but it could make life easier someday.
Read, read, read the forum here. This was just a real brief overview. If you don't quite understand any part, it should at least help you with what to search to learn what you need to know.
Sent from my LG-V410 using XDA Free mobile app
jason2678 said:
Ok. To install cm with no computer use, I'd say the easiest way would be to get root again with towelroot. Then install flashify from the play store. use flashify to install a custom recovery. I prefer TWRP.
Next download cm rom and Gapps. Follow the installation instructions for the rom. Generally that's boot into recovery, wipe dalvik, cache, system, and data, flash rom, flash Gapps, then reboot. You can do this from the internal SD, it won't erase that when you wipe. However, an external SD can be really handy for getting out of a jam.
If you haven't done it, a little research on the forums here about backing up your efs might be in order before flashing roms. Hope you never need it, but it could make life easier someday.
Read, read, read the forum here. This was just a real brief overview. If you don't quite understand any part, it should at least help you with what to search to learn what you need to know.
Sent from my LG-V410 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks friend will look into it a little more. So is there a major risk of getting bricked or are chances slim? Also do you have any links to the Cyanogenmod version I'm looking for? I would like it to be 4.4.2, not 5.X.X. And I also need the appropriate gapps file. If you don't know I still thank you for the info friend!
KentuckyGuy447 said:
Thanks friend will look into it a little more. So is there a major risk of getting bricked or are chances slim? Also do you have any links to the Cyanogenmod version I'm looking for? I would like it to be 4.4.2, not 5.X.X. And I also need the appropriate gapps file. If you don't know I still thank you for the info friend!
Click to expand...
Click to collapse
Chances of bricking should be slim as long as you follow the instructions closely.
CyanogenMod 11 is based on Android 4.4.X, Kitkat. Nightlies can be found here or here.
Snapshot releases, sometimes called monthlies, can be found here.
There are options regarding Google Apps( GAPPS ) the choices from CM are here.
Some prefer the GAPPS packages provided by Paranoid Android, look here.
dawgdoc said:
Chances of bricking should be slim as long as you follow the instructions closely.
CyanogenMod 11 is based on Android 4.4.X, Kitkat. Nightlies can be found here or here.
Snapshot releases, sometimes called monthlies, can be found here.
There are options regarding Google Apps( GAPPS ) the choices from CM are here.
Some prefer the GAPPS packages provided by Paranoid Android, look here.
Click to expand...
Click to collapse
Thanks so much! Have been researching like crazy and odds seem pretty good. Problem is I've hit a ditch headfirst. I can't reboot using towering because I updated my kernel sometime through the period when my phone was unrooted (idk when or how this was done.) The date is apast june the 3rd and i read it won't work apast that date. Is there a workaround for this? I have no PC so I would like a non-PC method if possible. I just wanted to say I have tried all the modstrings for toweroot and still nothing.
KentuckyGuy447 said:
Thanks so much! Have been researching like crazy and odds seem pretty good. Problem is I've hit a ditch headfirst. I can't reboot using towering because I updated my kernel sometime through the period when my phone was unrooted (idk when or how this was done.) The date is apast june the 3rd and i read it won't work apast that date. Is there a workaround for this? I have no PC so I would like a non-PC method if possible. I just wanted to say I have tried all the modstrings for toweroot and still nothing.
Click to expand...
Click to collapse
The June 3rd date probably only counts if you took all of the OTA updates, okay rechecked your OP and I see that you are on NE4. I recall that either the NE4 or the NJ1 update patched the kernel to block TowelRoot. I take it when you say Firmware 4.4.2 KitKat you mean baseband, modem, and Samsung stock rom.
With SuperSu you can re-root using it, assuming you unrooted but did not remove the app. I don't know if the same applies to th SU app that comes with CWM. You could try. If you did go back to stock rom and properly formated you may no longer have su on your phone.
Yes, if you have a custom recovery on your phone you should be able to re-root without a PC. Search for the zip version of SuperSu, put it on an external sdcard, and flash it through the recovery. Without a custom recovery I'm not sure of other options not requiring root that do not involve a PC (Windows or Linux) or a Mac. Apps like Flashify require root, so will not work for you at the moment.
dawgdoc said:
The June 3rd date probably only counts if you took all of the OTA updates, okay rechecked your OP and I see that you are on NE4. I recall that either the NE4 or the NJ1 update patched the kernel to block TowelRoot. I take it when you say Firmware 4.4.2 KitKat you mean baseband, modem, and Samsung stock rom.
With SuperSu you can re-root using it, assuming you unrooted but did not remove the app. I don't know if the same applies to th SU app that comes with CWM. You could try. If you did go back to stock rom and properly formated you may no longer have su on your phone.
Yes, if you have a custom recovery on your phone you should be able to re-root without a PC. Search for the zip version of SuperSu, put it on an external sdcard, and flash it through the recovery. Without a custom recovery I'm not sure of other options not requiring root that do not involve a PC (Windows or Linux) or a Mac. Apps like Flashify require root, so will not work for you at the moment.
Click to expand...
Click to collapse
Thanks for the info, sadly I did uninstall #SU. Here is a ss of my modem info and such. I think it pretty much confirms I have the NJ1 version but I need you to confirm that.
KentuckyGuy447 said:
Thanks for the info, sadly I did uninstall #SU. Here is a ss of my modem info and such. I think it pretty much confirms I have the NJ1 version but I need you to confirm that.
Click to expand...
Click to collapse
I'm stuck.
You can install a custom recovery without having root, if you have a PC. You would use either Odin, Heimdall, or maybe adb.
You can install a custom recovery without a PC if you have root. You would use an app Like Flashify, Rom Manager, or Goo Manager (if it still exists).
You can flash a rom without a PC if you have a custom recovery, root is not needed.
Some roms, usually stock, can be flashed without a custom recovery if you have a PC.
I don't know the solution until you have access to a PC. I could see it being possible using a live USB with persistence of a Linux distribution, but you still have need for a PC. It's been a while since I created a live USB. The method I used required a small installation on the PC. so I don't see this as an immediate solution for you.
Oh sorry. I don't think towelroot works once you're on nj1, unless it has been updated.
If you get access to a PC, rooting is still fairly easy. You can use download mode and odin or heimdall to flash a custom recovery (be sure to uncheck reboot if using odin, or be really ready to pull battery). Don't let your phone reboot normally, you'll have to pull battery once odin is done.
Reboot to custom recovery, then flash supersu and you'll be rooted again, and set up to do whatever you want with your phone.
Sent from my LG-V410 using XDA Free mobile app
Thanks all for your help. I have decided I'm gonna give C-F Root a try as it seems very easy, then use Flashify to get CWM. Correct me if I'm wrong but there's no boot loader for my model type right? Couldn't seem to find anything on the subject except the Verizon variant. I'm gonna still need help deciding which gapps to flash as I'm gonna flash the latest Cyanogenmod monthly build. Is there anything else to be aware of when using a new Rom?
KentuckyGuy447 said:
Thanks all for your help. I have decided I'm gonna give C-F Root a try as it seems very easy, then use Flashify to get CWM. Correct me if I'm wrong but there's no boot loader for my model type right? Couldn't seem to find anything on the subject except the Verizon variant. I'm gonna still need help deciding which gapps to flash as I'm gonna flash the latest Cyanogenmod monthly build. Is there anything else to be aware of when using a new Rom?
Click to expand...
Click to collapse
excuse for butting in .... but if you dont know your bootloader/modem info. here is an app called 'samsung info' that should tell you.
your question "...... but theres no bootloader for my phone model right?" kinda worried me. its important to know because they should match AND trying to downgrade can brick your device. on the plus side ; i've never seen a custom ROM include bootloader/modem in it.
again , just a thought and not trying to butt in.:good:
https://www.dropbox.com/s/4ka74x02tg1rrn1/org.vndnguyen.phoneinfo-1.apk?dl=0
"all i can really do , is stay out of my own way and let the will of heaven be done"
As mrrocketdog stated, the Samsung Info app will tell you your bootloader and modem. If what you previously stated is correct, they should both be NJ1. You can get the same info by issuing these commands in a terminal emulator on the phone:
Code:
getprop ro.bootloader
and
Code:
getprop | grep version.baseband
Appreciate the butting in! You may have just saved me from bricking my phone lol. Maybe I need to do a lot more research because that just lost me. So how do I tell that my phone is equipped with a boot loader? And if it is how do I disable it? I read that in order to flash a new Rom the boot loader must be disabled. (Correct me if I'm wrong) I'm no where near the point of flashing a new Rom (Cyanogenmod) but this is a great furniture reference to me.
KentuckyGuy447 said:
Appreciate the butting in! You may have just saved me from bricking my phone lol. Maybe I need to do a lot more research because that just lost me. So how do I tell that my phone is equipped with a boot loader? And if it is how do I disable it? I read that in order to flash a new Rom the boot loader must be disabled. (Correct me if I'm wrong) I'm no where near the point of flashing a new Rom (Cyanogenmod) but this is a great furniture reference to me.
Click to expand...
Click to collapse
every phone has a bootloader , two if i'm not mistaken. the one you're concerned with comes already unlocked on the good 'ol S3. (i bricked my first s3 trying to 'unlock' the bootloader). just find out bootloader/modem version (see posts above) to make sure they match (to avoid issues later) and just dont ever try to downgrade.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
every phone has a bootloader , two if i'm not mistaken. the one you're concerned with comes already unlocked on the good 'ol S3. (i bricked my first s3 trying to 'unlock' the bootloader). just find out bootloader/modem version (see posts above) to make sure they match (to avoid issues later) and just dont ever try to downgrade.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
You have lifted a burden off my shoulders friend! Ever since I wanted to flash a custom Rom I've been worried if my phones bootloader was locked! I can now be at ease now that I know its unlocked. Will check upon that info about bootloader/modem.
Here is the info mrrocketdog
Is there a reason you can't use a PC to install a ROM?
I'm asking because I also do not know of a way to install a ROM without having root.
If you are able to root, you could try using the CM installer again.
audit13;5898140 said:
Thanks friend no worries, mrrocketdog helped me figure it out, than to all who helped!
Click to expand...
Click to collapse
KentuckyGuy447 said:
Here is the info mrrocketdog
Click to expand...
Click to collapse
Those are the latest versions of the bootloader and modem. You will be good for CM 12 or CM 11, and other custom ROMs based on CM. Older versions will work with them, but you probably need to edit the updater-script. (The older versions are not likely to include the NJ1 versions in the checks as they were not out when the ROMs were last updated.) NJ1 will also work with any of the ROMs based on the KitKat TouchWiz releases by Samsung.
As soon as you can find a PC to borrow you should be in business. Any chance of using one at a public library?
Appreciate all the help you gave me too friend, providing the links to cm and gapps, gonna borrow my friends laptop Sunday and try to root flash C-F Root through Odin. Thats the part that scares me but I should be good as people has confirmed it works for NJ1. Wish me luck friend. Would you recommend installing CM12? I personally like kit Kat and I know CM11 is based on that but is CM12 better? I guess its based on Lollipop
There are lots of guides to rooting the Verizon LG G3. Many of them are older and have problems working on the 24B software version of Android 5.0.1. I guess I have 2 questions: 1) Is there presently a method to root this phone? 2.) TWRP says, "you must be rooted and vulnerable to BUMP to use TWRP on this device." I don't know what vulnerable to BUMP means. Yes, I know I could try to Google it, but I haven't been very successful at finding an answer that I understand.
EDIT: Root achieved. Still looking for a reliable install process for TWRP
Have you had any luck getting TWRP on stock 24B? The only option I've seen is to bump TWRP to 23C and use JasmineROM 8.0.
aork said:
Have you had any luck getting TWRP on stock 24B? The only option I've seen is to bump TWRP to 23C and use JasmineROM 8.0.
Click to expand...
Click to collapse
I was able to get TWRP on my rooted 24B with a new version of autorec @bender_007 used the firmware from my phone to build it. Where else can you get service like that! When you use 24B version from that page, you may be on TWRP 2.8.6.1 If he hasn't had a chance to update it yet. You can go to 2.8.7.0 if you want, but be certain to use the version from 777jon thread and NOT directly from TWRP. In all cases just double check you are getting the correct version for your phone. You should be able to run TWRP with no errors, and the install could not be easier. Just follow the instructions on the OP. Enjoy!
dweezle said:
I was able to get TWRP on my rooted 24B with a new version of autorec @bender_007 used the firmware from my phone to build it. Where else can you get service like that! When you use 24B version from that page, you may be on TWRP 2.8.6.1 If he hasn't had a chance to update it yet. You can go to 2.8.7.0 if you want, but be certain to use the version from 777jon thread and NOT directly from TWRP. In all cases just double check you are getting the correct version for your phone. You should be able to run TWRP with no errors, and the install could not be easier. Just follow the instructions on the OP. Enjoy!
Click to expand...
Click to collapse
Perfect! Thanks a ton to you and @bender_007 both!
So I bought a new G3. It'll be there today, and I don't know if I should update to MM first then root, or just root, twrp and then load a custom ROM.
There isn't any need to update to MM right? Since we're all here doing custom Roms, I can always just flash a rooted stock MM ROM right?
mroneeyedboh said:
So I bought a new G3. It'll be there today, and I don't know if I should update to MM first then root, or just root, twrp and then load a custom ROM.
There isn't any need to update to MM right? Since we're all here doing custom Roms, I can always just flash a rooted stock MM ROM right?
Click to expand...
Click to collapse
Its easiest to root LP and install TWRP then just flash a rom
Which model? Anyways, on my D850, I updated to the latest version (had to keep forwarding date after each update so get the following update, because the AT&T version wants you to wait a day between updates), which I believe was the Lollipop LRX21Y. After that, I used this guide for rooting:
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
Note that the distribution did not have a "reboot" script, even though it was mentioned in the docs. Create an empty text file called "reboot" without an extension and type one word LEAVE in it, then it should work. Or simply pull the battery out after rooting to exit download mode.
And use this guide for TWRP (make sure you download the correct version of autorec from that page):
http://forum.xda-developers.com/lg-g3/general/apk-flash-twrp-autorec-thanks-to-t3081396
Sorry, can't believe I forgot the model. Its a vs985 and it was OK 10b. So I used stump and twrp manager. All is well now. Thanks all!
mroneeyedboh said:
Sorry, can't believe I forgot the model. Its a vs985 and it was OK 10b. So I used stump and twrp manager. All is well now. Thanks all!
Click to expand...
Click to collapse
You are perfectly fine to do so on 10(which is kitkat), on lollipop or mm you can´t go down the same routine
Hi all. It's been a while since I've flashed anything on my v500, but last night I decided to try and update to the latest TWRP. Well, I soft bricked it somehow. It was running CM 12.x with TRWP great before, but I just had to mess with it. Anyway, I was able to use the LG Mobile Support Tool and I got the pad up and running again, so here I am sitting on stock v50020f 4.4.2 firmware. This is where I'm lost. Most threads I see about rooting/loki/TWRP are for 4.2.2 and below.
I originally used Kingoroot, and was able to get root with that, but couldn't update binaries with SuperSU or SuperUser. I'm not totally comfortable with that method anyway (sending data to Chinese servers and all), so I disabled it. Can anybody point me to threads about successfully rooting and installing custom recovery from 20f? I've been reading around in circles and my head is swimming.
I appreciate any help. I don't need hand-holding, just a push in the right direction.
Thanks!
EDIT: I was able to get root using the ioroot sideload method. Just not sure how to install TWRP.
EDIT2: I installed TWRP using the method in this thread http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-official-twrp-t3135886 with Rashr. Went to restore an old backup, and it softbricked again. I'm guessing that backup was corrupt. The TWRP I flashed should have Loki (or whatever bypass) built in, right?
Thread closed per OP request