There are lots of guides to rooting the Verizon LG G3. Many of them are older and have problems working on the 24B software version of Android 5.0.1. I guess I have 2 questions: 1) Is there presently a method to root this phone? 2.) TWRP says, "you must be rooted and vulnerable to BUMP to use TWRP on this device." I don't know what vulnerable to BUMP means. Yes, I know I could try to Google it, but I haven't been very successful at finding an answer that I understand.
EDIT: Root achieved. Still looking for a reliable install process for TWRP
Have you had any luck getting TWRP on stock 24B? The only option I've seen is to bump TWRP to 23C and use JasmineROM 8.0.
aork said:
Have you had any luck getting TWRP on stock 24B? The only option I've seen is to bump TWRP to 23C and use JasmineROM 8.0.
Click to expand...
Click to collapse
I was able to get TWRP on my rooted 24B with a new version of autorec @bender_007 used the firmware from my phone to build it. Where else can you get service like that! When you use 24B version from that page, you may be on TWRP 2.8.6.1 If he hasn't had a chance to update it yet. You can go to 2.8.7.0 if you want, but be certain to use the version from 777jon thread and NOT directly from TWRP. In all cases just double check you are getting the correct version for your phone. You should be able to run TWRP with no errors, and the install could not be easier. Just follow the instructions on the OP. Enjoy!
dweezle said:
I was able to get TWRP on my rooted 24B with a new version of autorec @bender_007 used the firmware from my phone to build it. Where else can you get service like that! When you use 24B version from that page, you may be on TWRP 2.8.6.1 If he hasn't had a chance to update it yet. You can go to 2.8.7.0 if you want, but be certain to use the version from 777jon thread and NOT directly from TWRP. In all cases just double check you are getting the correct version for your phone. You should be able to run TWRP with no errors, and the install could not be easier. Just follow the instructions on the OP. Enjoy!
Click to expand...
Click to collapse
Perfect! Thanks a ton to you and @bender_007 both!
Related
Hi all. This is my first LG phone and I looked around but didn't see any reason not to fully upgrade firmware before I root. Any input any drawbacks of upgrading fully? Also, this is a t-mobile used phone and the back of the battery case has a wireless charging stickon in it. Is this standard for this phone? I havent researched the look/brand of it yet as I have just got it. Thanks. Its a nice phone. Can't wait to get tweaking!
Bubba Fett said:
Hi all. This is my first LG phone and I looked around but didn't see any reason not to fully upgrade firmware before I root. Any input any drawbacks of upgrading fully? Also, this is a t-mobile used phone and the back of the battery case has a wireless charging stickon in it. Is this standard for this phone? I havent researched the look/brand of it yet as I have just got it. Thanks. Its a nice phone. Can't wait to get tweaking!
Click to expand...
Click to collapse
The latest build 10R broke all the rooting tools.
Assuming you are still on build "c" or "m"...
Root first w/ PurpleDrake and make sure it installed (TWRP) custom recovery. It should also install SuperSU but I can't remeber, you may have to read a bit.
I would then update to the latest TWRP version which can be done easily with TWRP manager. Make sure you install busy box when prompted by TWRP manager!
Perform a nandroid backup before updating!!!
Then flash the "R" firmware with TWRP flashable zips available here.
Be certain to flash SuperSU before rebooting! If you forget there is no way to get root again after a reboot.
Good luck...
AndroidUzer said:
The latest build 10R broke all the rooting tools.
Assuming you are still on build "c" or "m"...
Root first w/ PurpleDrake and make sure it installed (TWRP) custom recovery. It should also install SuperSU but I can't remeber, you may have to read a bit.
I would then update to the latest TWRP version which can be done easily with TWRP manager. Make sure you install busy box when prompted by TWRP manager!
Perform a nandroid backup before updating!!!
Then flash the "R" firmware with TWRP flashable zips available here.
Be certain to flash SuperSU before rebooting! If you forget there is no way to get root again after a reboot.
Good luck...
Click to expand...
Click to collapse
Thank you. I actually found that out the hard way. Flashed back a version and got root. Wifi calling and text not working yet so I found the exact thread you posted and was gonna try. Great tip on flashing supersu though. I'm new to LG but looking forward to getting this phone right. Thanks for the input.
@Bubba Fett
Here is another great source of various upgrade, downgrade and restore to stock flashing methods and tools including TWRP flashable Stock ROMS. Make sure to read ThePagels OP carefully before proceeding.
Also in the OP: "Strengthens and weaknesses for each method click here" is also well worth reading.
[Firmware](Upgrade+Root/Downgrade/Unroot) Files+Flashing Guide [TOT/KDZ/TWRP]
Sorry for the nooby question. I am a little familiar with rooting and such but have been in Samsung world with TMo for 3 years. I just got an LG G3 (still TMo, D851) that has already been updated to Lollipop v 5.0.1 (v20b). I have found the one-click root by avicohh, so I am comfortable with that. I have read everything I can find and just want to make certain of one thing. Is it correct that we CANNOT flash TWRP while staying on Lollipop? Do I really have to downgrade the software, then root, flash TWRP, and then upgrade back to Lollipop? Thats what I've read but I am hoping someone can tell me that is not true. I need some good news!
Thanks to everyone for the help and support.
hodgestl said:
Sorry for the nooby question. I am a little familiar with rooting and such but have been in Samsung world with TMo for 3 years. I just got an LG G3 (still TMo, D851) that has already been updated to Lollipop v 5.0.1 (v20b). I have found the one-click root by avicohh, so I am comfortable with that. I have read everything I can find and just want to make certain of one thing. Is it correct that we CANNOT flash TWRP while staying on Lollipop? Do I really have to downgrade the software, then root, flash TWRP, and then upgrade back to Lollipop? Thats what I've read but I am hoping someone can tell me that is not true. I need some good news!
Thanks to everyone for the help and support.
Click to expand...
Click to collapse
No because the 851 variant is the only variant with an unlocked bootloader. You don't have to do anything except get the 851 twrp recovery img and flash it..
Swizzle82 said:
No because the 851 variant is the only variant with an unlocked bootloader. You don't have to do anything except get the 851 twrp recovery img and flash it..
Click to expand...
Click to collapse
Thank you very much for the response. So can I just use Flashify to get current TWRP? (the phone is rooted!)? So the T-Mo bootloader is different than other variants? My confusion comes comes from this quote below...
"I saw a lot of questions of G3 users about how to install Twrp after the root, so I will explain briefly:
For now, if you are on stock lollipop you can't just flash Twrp via flashify etc like the old days in KitKat, but you can follow this guide over here."
that is a direct quote from this thread, http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951. It is true that that statement came from the General LG G3 forum, not the T-Mo forum. If I can just do Flashify or TWRP Manager and keep on going, that would be great. I guess I don't know exactly how I would flash it? Thanks again. I just need a little more clarification. After a couple years I just figured out Samsung procedures! Now starting over with LG procedures. THANK YOU FOR THE HELP.
hodgestl said:
Thank you very much for the response. So can I just use Flashify to get current TWRP? (the phone is rooted!)? So the T-Mo bootloader is different than other variants? My confusion comes comes from this quote below...
"I saw a lot of questions of G3 users about how to install Twrp after the root, so I will explain briefly:
For now, if you are on stock lollipop you can't just flash Twrp via flashify etc like the old days in KitKat, but you can follow this guide over here."
that is a direct quote from this thread, http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951. It is true that that statement came from the General LG G3 forum, not the T-Mo forum. If I can just do Flashify or TWRP Manager and keep on going, that would be great. I guess I don't know exactly how I would flash it? Thanks again. I just need a little more clarification. After a couple years I just figured out Samsung procedures! Now starting over with LG procedures. THANK YOU FOR THE HELP.
Click to expand...
Click to collapse
Flashify still works in lollipop, I know cause thats how I got TWRP on my device and I have done it more than I can count. But I suggest you go to TWRP's official site and download their latest .img for the D851. Put that on your phone external SD then use Flashify to flash that img. Sometimes flashify does not have the most current TWRP img for the device when you download it through their collection.
vel0city said:
Flashify still works in lollipop, I know cause thats how I got TWRP on my device and I have done it more than I can count. But I suggest you go to TWRP's official site and download their latest .img for the D851. Put that on your phone external SD then use Flashify to flash that img. Sometimes flashify does not have the most current TWRP img for the device when you download it through their collection.
Click to expand...
Click to collapse
Yes sir! Flashify worked great on the D851 with Lollipop installed. Thank you so much. I wish the info out here about the need to downgrade back to KK were a lot clearer. Evidently, T-Mo G3 (D851) users have it best. That info can be tough to find. Thank you for your support. I am good to go now!
Hello everyone. I have been all over the web and especially in this forum reading up for weeks about rooting and TWRP Recovery for my brand new Sprint LS980 (Best Buy $150 plus tax!) that I updated to ZVE via OTA. I'm still a bit confused. Information is all over the place and varies. For rooting, there seems to be at least three ways from what I understand. The first is Stump Root, then there is LG One Click Root, and finally DP Tools. Which of these is best? I just want to keep the stock ZVE (Odexed) and be able to have TWRP for backup purposes. I may run the stock ZVG update in the future when it becomes available as a ROM to flash thru TWRP.
That leads me to more confusion. There seems to be two editions of TWRP available with various version updates for each. The original TWRP Recovery from Team Win and then Blastagator's modded TWRP Recovery with Thermal Control and F2FS. Which one of these two editions and WHICH VERSION UPDATE is best for my Sprint LS980 on ZVE? Do I need to worry about my phone heating up and melting from using it with the original TWRP? Please remember that I just want to keep it stock ZVE for now and maybe run the stock ZVG in the future. What is the best way to install the right TWRP for me after root?
I ask all of these questions because I read here and there about overheating issues and possible damaged screens from the original TWRP. I also read here and there about TWRP not working with ZVE unless downgrading the bootloader to ZV8 and/or the radio (modem) as well . I need Knock On/Off to work and there are many reporting it not working after rooting and TWRP. Can someone please clear this up for me? Thanks in advance.
If your on zve and want to stay on that. Then root with stump root. Then install autorec for kitkat. I suggest flashing dorimanx Kernal knock on n off works, and b there will be no wedgie line issues and no b overheating. Good luck
jcsheriff said:
If your on zve and want to stay on that. Then root with stump root. Then install autorec for kitkat. I suggest flashing dorimanx Kernal knock on n off works, and b there will be no wedgie line issues and no b overheating. Good luck
Click to expand...
Click to collapse
Thanks jcsheriff, but after some more research, I actually found the best way was to use Stump Root and then use Flashify to install blastagator's TWRP mod. This is what I did and it worked amazing and very easy (less than 10 minutes) on my Sprint G2 with no computer needed. All stock with no modifications and no issues at all!
The best way to root and install the latest TWRP for Sprint LS980 on ZVE (KitKat) with no issues is this. Easiest and fastest way and as simple as 1, 2, 3! So that all can understand this clearly if they need it, see below:
1. Root the stock Sprint LS980ZVE (KitKat) with Stump Root from here:
http://downloads.codefi.re/jcase/Stump-v1.2.0.apk
If you need instructions, read this:
http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
2. Use Flashify from Play Store to install blastagator's latest recovery.img from here:
http://blastagator.ddns.net/twrp.html (You have to unzip it first)
3. Smile and enjoy the happiness!
Ecks-One said:
Thanks jcsheriff, but after some more research, I actually found the best way was to use Stump Root and then use Flashify to install blastagator's TWRP mod. This is what I did and it worked amazing and very easy (less than 10 minutes) on my Sprint G2 with no computer needed. All stock with no modifications and no issues at all!
The best way to root and install the latest TWRP for Sprint LS980 on ZVE (KitKat) with no issues is this. Easiest and fastest way and as simple as 1, 2, 3! So that all can understand this clearly if they need it, see below:
1. Root the stock Sprint LS980ZVE (KitKat) with Stump Root from here:
http://downloads.codefi.re/jcase/Stump-v1.2.0.apk
If you need instructions, read this:
http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
2. Use Flashify from Play Store to install blastagator's latest recovery.img from here:
http://blastagator.ddns.net/twrp.html (You have to unzip it first)
3. Smile and enjoy the happiness!
Click to expand...
Click to collapse
Thanks for your guide.
I did your way and it worked.
But I had to force root.
The easy way to install recovery is with autorec for KK.
Worked realy fast and easy. But do not try to install twrp with autorec on other version.
I had my phone bricked by autorec.
Good luck
anyone know if loki works on ZVE
hi, pls can somebody help me? i have a big problem with my lg-ls980 each time i flash LS980ZV7.tot LS980ZV8.tot LS980ZVA.tot it runs very very slow but when i flash LS980ZVC.tot it work very smoothly i try to flash over and over same problem pls help me thanks in advance
Im trying to find a twrp file that doesnt require downgrade, ive seen on the twrp.me web page that there is a recent stable twrp being worked on but the vk810 is not in the list of supported devices. Google searches bring up out dated threads on vzw lg gpad, any help would be appreciated
You'll have to be more specific. Downgrade of what? If you meant without downgrading the bootloader, that's not possible. It also has nothing to do with TWRP specifically, it's because the 11A (4.2.2) bootloader is vulnerable to a hack which allows installation and booting into any custom recovery.
There's nothing that could be done to any custom recovery to get around this, it's a restriction of the device.
There's never been any official TWRP releases for the VK810. The 2.8.7.0 available in one of the Development sections is the latest you can get (or need), although of course the first thing you still have to use the loki hack and install the initial version 2.7.0.1 of TWRP, then flash the 2.8.7.0 one from 2.7.0.1.
Do you know of a reliable guide with download links and instructions im currently running 5.0.2 rooted w/ supersu.
Wootang912 said:
Do you know of a reliable guide with download links and instructions im currently running 5.0.2 rooted w/ supersu.
Click to expand...
Click to collapse
The third link down in my signature below: "[VK810.4G] [altev] most reliable way to root and install a custom recovery" Since you're already rooted with SuperSU you can skip to the part about installing the initial v2.7.0.1 of TWRP.
So I bought a new G3. It'll be there today, and I don't know if I should update to MM first then root, or just root, twrp and then load a custom ROM.
There isn't any need to update to MM right? Since we're all here doing custom Roms, I can always just flash a rooted stock MM ROM right?
mroneeyedboh said:
So I bought a new G3. It'll be there today, and I don't know if I should update to MM first then root, or just root, twrp and then load a custom ROM.
There isn't any need to update to MM right? Since we're all here doing custom Roms, I can always just flash a rooted stock MM ROM right?
Click to expand...
Click to collapse
Its easiest to root LP and install TWRP then just flash a rom
Which model? Anyways, on my D850, I updated to the latest version (had to keep forwarding date after each update so get the following update, because the AT&T version wants you to wait a day between updates), which I believe was the Lollipop LRX21Y. After that, I used this guide for rooting:
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
Note that the distribution did not have a "reboot" script, even though it was mentioned in the docs. Create an empty text file called "reboot" without an extension and type one word LEAVE in it, then it should work. Or simply pull the battery out after rooting to exit download mode.
And use this guide for TWRP (make sure you download the correct version of autorec from that page):
http://forum.xda-developers.com/lg-g3/general/apk-flash-twrp-autorec-thanks-to-t3081396
Sorry, can't believe I forgot the model. Its a vs985 and it was OK 10b. So I used stump and twrp manager. All is well now. Thanks all!
mroneeyedboh said:
Sorry, can't believe I forgot the model. Its a vs985 and it was OK 10b. So I used stump and twrp manager. All is well now. Thanks all!
Click to expand...
Click to collapse
You are perfectly fine to do so on 10(which is kitkat), on lollipop or mm you can´t go down the same routine