Develop Bugs

[ROOT]Compilation on How to root Xperia Acro S 2.55 Firmware

I rooted my Xperia Acro S with 2.55 firmware and keeping my bootloader lock with these steps, feel free to follow and don't forget to press THANKS.
Prepare:
*Settings: Security [Unknown sources] CHECKED
*Settings: Developer Options [USB debugging] CHECKED
*Charge the Xperia Acro S battery to 50% - 80%.
1. Flash your rom to 2.45 using flashtool (http://androxyde.github.com/) (you can uncheck all the menus even the wipe column) (this is the file of 2.45 rom http://forum.xda-developers.com/showthread.php?t=2076625)
2. After flashing use this (http://forum.xda-developers.com/showthread.php?t=1886460) so that your Acro S will gain root access, after rooting you can now install CWM just follow this:
Download link: https://www.box.com/s/qel8x02wx89uqs2tqgk2
Instructions:
a) Extract ZIP to your computer
b) Connect your phone in ADB mode
c) Launch the .bat file
d) Tap the Sony logo repeatedly when turning your phone on to enter recovery mode
3. Follow the instruction gave by desperanto and you will get the last stock 2.55 with root + cwm
*Unzip archive and flash ftf file via flashtool wintout any wipe! This is the file (http://www13.zippyshare.com/v/18967768/file.html)
*Copy StockRom_6.1.A.2.55+root+cwm.zip (This is the file https://drive.google.com/uc?id=0By2cxCzz7TAFblJmRGw4QkRuTHc&export=download) on your SD Card and install via CWM. (If you want clean ROM, wipe all before installing)
Done!
Press thanks if I helped you
credits:
Bin4ry
Desperanto86
danlikesphones

Very useful post, nice to have all the information in one place. I had a lot of trouble with this and I didn't understand what I was doing wrong but it turns out I was flashing the WRONG rom. Make sure the ROM you download in step 3 is called "LT26w (Xperia acro S)_6.1.A.2.55_Version" and is ONLY 11MB. I was flashing a ROM that was 400MB so when I rebooted my phone I lost CWM and root.
When I flashed the correct ROM, my phone restarted and I still had CWM. I then proceeded with installing the zip file through CWM and it worked! This only takes less than 5 minutes (if you're doing it correctly) and when your phone restarts you should still have all of your data (if you didn't wipe).
Hope this solves the problem of people losing CWM when they flash the ROM - press thanks if I helped!
P.S. you will have both Superuser and Supersu if you followed the method in the OP. If you want to keep SuperSU you can go to System/App and delete the superuser.apk. If you want to keep Superuser you can open the SuperSU app and go to settings and there is a place to switch SU apps, or you can uninstall the SuperSU app from your phone completely.

danlikesphones said:
Very useful post, nice to have all the information in one place. I had a lot of trouble with this and I didn't understand what I was doing wrong but it turns out I was flashing the WRONG rom. Make sure the ROM you download in step 3 is called "LT26w (Xperia acro S)_6.1.A.2.55_Version" and is ONLY 11MB. I was flashing a ROM that was 400MB so when I rebooted my phone I lost CWM and root.
When I flashed the correct ROM, my phone restarted and I still had CWM. I then proceeded with installing the zip file through CWM and it worked! This only takes less than 5 minutes (if you're doing it correctly) and when your phone restarts you should still have all of your data (if you didn't wipe).
Hope this solves the problem of people losing CWM when they flash the ROM - press thanks if I helped!
P.S. you will have both Superuser and Supersu if you followed the method in the OP. If you want to keep SuperSU you can go to System/App and delete the superuser.apk. If you want to keep Superuser you can open the SuperSU app and go to settings and there is a place to switch SU apps, or you can uninstall the SuperSU app from your phone completely.
Click to expand...
Click to collapse
Thank to you for all the detail.
I did pass the steps, and get a CWM-installed Stock 2.55, but couldn't have root access.
But after I install the Superuser.zip from Recovery, everything works fine.
So, if you could not get root access, after reboot, you could back to Recovery and install the Superuser again.
For Superuser.zip, you could find in below thread:
http://forum.xda-developers.com/showpost.php?p=34530853&postcount=1074

Thank you guys for the additional information, I'm glad these steps worked. :victory:
Don't forget to press Thanks!

up!

plzz help to flash a cm11

i want to flash CM11
i have done many a times in samsung..but sony its hectic.
plzz help me out..i have unlocked my bootloader.
do i have to install superuser? but how?
nd trying different methods but not succesfull..
m on latest stock firmware....
thnkx in advance

Firstly, make sure you are in 15.4.A.0.23 and above.
1. Head over to this site. Download the latest build for Nicki.
2. Extract boot.img from the downloaded zip and flash in fastboot.
3. Wipe /data and /cache through CWM.
4. Put the CM11 zip in any storage then flash it in CWM.
5. (Optional) Download GApps from here. Make sure it's for 4.4.4. Then flash it in CWM.
If you are having root permission problems, download the latest SuperSU flashable zip from here then flash it in CWM. Disable the default Superuser app (it can be found in Developer Options by tapping the Build Number 7 times) in CM11 and untick the box in SuperSU that states "Respect CM root settings."
That's it. Hope I helped.

elmkzgirxp said:
Firstly, make sure you are in 15.4.A.0.23 and above.
1. Head over to this site. Download the latest build for Nicki.
2. Extract boot.img from the downloaded zip and flash in fastboot.
3. Wipe /data and /cache through CWM.
4. Put the CM11 zip in any storage then flash it in CWM.
5. (Optional) Download GApps from here. Make sure it's for 4.4.4. Then flash it in CWM.
If you are having root permission problems, download the latest SuperSU flashable zip from here then flash it in CWM. Disable the default Superuser app (it can be found in Developer Options by tapping the Build Number 7 times) in CM11 and untick the box in SuperSU that states "Respect CM root settings."
That's it. Hope I helped.
Click to expand...
Click to collapse
does 4.4 Gapps have photo sphere or not?

theperson333 said:
does 4.4 Gapps have photo sphere or not?
Click to expand...
Click to collapse
I don't think so. They removed it because it doesn't work for most devices.

elmkzgirxp said:
I don't think so. They removed it because it doesn't work for most devices.
Click to expand...
Click to collapse
for anyone interested, I have found that it is due to our devices lacking gyro.

[GUIDE] [OFFICIAL CM12] [OTA] Yu Yureka Official CM12,Installation Guide

INSTALL OFFICIAL CM12 TO YU YUREKA​
Yu Yureka has got the official Cyanogenmod 12S sealed and signed by Google which is being rolled out today! Few users has already got the update and we have captured the OTA link , that means now we don't have to wait for the OTA update. We can also install them manually and can enjoy the sweeter taste of Lollipop.
As it is officially confirmed, you may check the forum
_____________________________________________________________________________
Requirements :-
1.) Data Plan to download approx 680 mb OTA file.
2.) Charged Yu Yureka device.
3.) Stock recovery, download here
4.) Rashr to flash stock recovery.
5.) Backup all your data.
6.) Patience, it will require 30 min to install the update
Steps to Install the OTA update :-
1.) Flash the stock recovery first from Rashr or Flashify.
2.) Download the OTA zip file and place it in your storage.
3.) Power off your device, Now press Volume Up + Volume Down + Power button simultaneously.
4.) Cyanogenmod Official Recovery will be opened.
5.) Select 2nd option i.e. Apply Update
6.) Select the storage, you have copied the OTA zip file
7.) Select the OTA Zip file, and open it, it will start to install the update.
8.) Wait for the completing installation, you have to reboot it manually .
9.) First bootup will take time, so keep patience.
10.) Voila You have successfully updated your Yu Yureka to CM12S.
NOTE: We are not responsible to any damage to your device. Do at your own risk!

data's
my data's are deleted or not.
during this update ?

Yes, it will
Panneer Selvam said:
my data's are deleted or not.
during this update ?
Click to expand...
Click to collapse
Your Phone storage will be formatted! And your Internal Storage will not, but make the backup of that too
Hit Thanks if help

You havn't send the link of the files, Can you send the link of how to download those recovery too, if i does that, it mean by phone will be rooted na, Sorry i am new bee i don't know much about rooting

JoelXD said:
You havn't send the link of the files, Can you send the link of how to download those recovery too, if i does that, it mean by phone will be rooted na, Sorry i am new bee i don't know much about rooting
Click to expand...
Click to collapse
DONT worry YOU can flash the above file by stock recovery also,
if you dont understand anything revert me back.

D_Rising_Pheonix said:
DONT worry YOU can flash the above file by stock recovery also,
if you dont understand anything revert me back.
Click to expand...
Click to collapse
Hmmm i did and it got installed successfully, but when my factory restore it from new cm12, its again doing all that from begining, but only difference this time, its installing 122 app, and before it was 156 app. Is it normall, Will it take so long to factory reset in Lolipop ??
Will it solve the problem if i would have rooted my device, i just on the recovery mode of Yureka, by pressing volume key and power button , than apply update and update the ROM. and now everytime i factory reset, its doing the whole process again again.
Android is Upgrading ...
Please help
Thanks in Advance !

I'm on custom ROM crdroid and cwm recovery,
So I just need to flash stock recovery and then flash the ota?

On Custom Rom Can i flash this...
I am on custom rom, should i flash in official recovery and flash the update? or what should i do??

Is upgrading to cm12 worth it?

Link to download stock 64-bit cyanogen recovery for CM12.0-YNG1TASOWO
Please provide me Link to download stock 64-bit cyanogen recovery for CM12.0-YNG1TASOWO.Please also tell me how to flash it.l,Currently I m using CWM/TWRP recovery.

I am on cm12s official update not able to install music app of Sony walkman of z3. After installing and on play it says can't play the song. Help

[Q] Camera Not Working after Upgrading To Lollipop

Hi all,
I've recently updated my stock FW from KitKat (.157) to Lollipop (.242) by flashing zipable files created by PRFcreator containing the FTF, SuperSU (version 2.46) and dualrecovery from Nut (version 2.8.12). I clean wiped the phone before flashing.
Now I noticed my stock Xperia camera app (front and back) isn't working. When I pushed the shutter button no picture is taken (even though I have plenty of space in my internal and external SD card). The autofocus function isn't working either. This is strange because in KitKat or when I flashed the FTF directly from Flashtool (so it's unrooted), I recalled the camera worked just OK.
Here's a list of what I've tried to fix the camera problem:
1. Clean data from stock camera app.
2. Installed another camera app.
3. Re-wiped the phone then re-flashed the flashable zip containing the Lollipop FW
4. Re-created flashable zip with PRF (but this time it's a signed zip)
5. Flashing the zip file using Philz Touch and TWRP
But still the problem remains.
What is the problem and how can I fix this?
Thanks.

Same here :/
I've upgraded from KitKat (stock, branded) to Lollipop (downloaded by XperiFirm and flashed by FlashTool).
Everything works fine, but the camera app just won't work (both front and back, also auto-focus is not working, just like said @komedol, it looks like the app freezes when it's trying to save a file).
I've tried to do a reset and even reflash. All in vain. What's strange even apps from Google Store cannot take any photos.
I really need to fix camera :/
any help from you, guys? :/
PS. My Lollipop ROM is not rooted, but I've unlocked bootloader before flashing a new ROM.

kamildzi said:
Same here :/
I've upgraded from KitKat (stock, branded) to Lollipop (downloaded by XperiFirm and flashed by FlashTool).
Everything works fine, but the camera app just won't work (both front and back, also auto-focus is not working, just like said @komedol, it looks like the app freezes when it's trying to save a file).
I've tried to do a reset and even reflash. All in vain. What's strange even apps from Google Store cannot take any photos.
I really need to fix camera :/
any help from you, guys? :/
PS. My Lollipop ROM is not rooted, but I've unlocked bootloader before flashing a new ROM.
Click to expand...
Click to collapse
I tried this method just now and it works (rooted with working autofocus for both front and rear camera).
1. Download older FW of Z1C. I downloaded the FTF of FW 14.2.A.1.114 from http://xperiafirmware.com/8-firmware/46-sony-xperia-z1-compact-d5503
2. Download or create pre-rooted flashable file of latest lollipop file then put in external SD card
3. Download FTF file of the latest lollipop (I used the same FTF for creating PRF file and for flashing the FTF via Flashtool)
4. Flash the older FW of Z1C using Flashtool. I check all option from "Wipe" and don't check any option from "Exclude" in the Flashtool
5. Root the FW using Easyroot then install Nut's latest dual recovery using installer
6. Reboot into recovery/TWRP then flash the PRF zip file located in external SD card
7. After flashing the PRF file, clear cache/dalvik and turn off the phone. Do not switch on
8. While keeping the phone off, start Flashtool then select the lollipop FTF file
9. Uncheck all options from "Wipe"
10. Under "Exclude", check the PARTITION,TA and SYSTEM
11. Click flash button, while pressing the volume down button connect USB cable to Z1C
12. After flashing finished, disconnect the cable and start the phone
I mostly followed the guide from this thread: http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893.
Hope this helps.

komedol said:
Hi all,
I've recently updated my stock FW from KitKat (.157) to Lollipop (.242) by flashing zipable files created by PRFcreator containing the FTF, SuperSU (version 2.46) and dualrecovery from Nut (version 2.8.12). I clean wiped the phone before flashing.
Now I noticed my stock Xperia camera app (front and back) isn't working. When I pushed the shutter button no picture is taken (even though I have plenty of space in my internal and external SD card). The autofocus function isn't working either. This is strange because in KitKat or when I flashed the FTF directly from Flashtool (so it's unrooted), I recalled the camera worked just OK.
Here's a list of what I've tried to fix the camera problem:
1. Clean data from stock camera app.
2. Installed another camera app.
3. Re-wiped the phone then re-flashed the flashable zip containing the Lollipop FW
4. Re-created flashable zip with PRF (but this time it's a signed zip)
5. Flashing the zip file using Philz Touch and TWRP
But still the problem remains.
What is the problem and how can I fix this?
Thanks.
Click to expand...
Click to collapse
I had the same problem upgrading from Jelly bean to Lollipop using TWRP, everything worked except the camera and autofocus.
My solution was upgrade where you first flash zip from TWRP and then, without powering the phone on, you flash ftf with flash tool - like in this thread http://forum.xda-developers.com/sony-xperia-z1-compact/general/mod-14-5-0-242-pre-rooted-xzdualrecovery-t3081109?nocache=1

lufthof said:
I had the same problem upgrading from Jelly bean to Lollipop using TWRP, everything worked except the camera and autofocus.
My solution was upgrade where you first flash zip from TWRP and then, without powering the phone on, you flash ftf with flash tool - like in this thread http://forum.xda-developers.com/sony-xperia-z1-compact/general/mod-14-5-0-242-pre-rooted-xzdualrecovery-t3081109?nocache=1
Click to expand...
Click to collapse
after I had also the problem with the latest version from lollipop (*.236), i found a simple method they has eliminated all my problems in 20 minutes.
Perhaps it works with other ftf also for other people.
http://forum.xda-developers.com/son...lollipop-5-t3264557/post64283783#post64283783

I have same issue, camera works in JellyBean?(14.2.A.1.114), but after upgrading to Lolipop 14.6.A.1.236, camera and autofocus wont work ;(, when i try to take a picture app freezes, and doesn't take a picture.
Sadly this happens even with STOCK flashed 14.6.A.1.236, with Flashtool or EMMA.
following method result in bootloop ;(
komedol said:
I tried this method just now and it works (rooted with working autofocus for both front and rear camera).
1. Download older FW of Z1C. I downloaded the FTF of FW 14.2.A.1.114 from http://xperiafirmware.com/8-firmware/46-sony-xperia-z1-compact-d5503
2. Download or create pre-rooted flashable file of latest lollipop file then put in external SD card
3. Download FTF file of the latest lollipop (I used the same FTF for creating PRF file and for flashing the FTF via Flashtool)
4. Flash the older FW of Z1C using Flashtool. I check all option from "Wipe" and don't check any option from "Exclude" in the Flashtool
5. Root the FW using Easyroot then install Nut's latest dual recovery using installer
6. Reboot into recovery/TWRP then flash the PRF zip file located in external SD card
7. After flashing the PRF file, clear cache/dalvik and turn off the phone. Do not switch on
8. While keeping the phone off, start Flashtool then select the lollipop FTF file
9. Uncheck all options from "Wipe"
10. Under "Exclude", check the PARTITION,TA and SYSTEM
11. Click flash button, while pressing the volume down button connect USB cable to Z1C
12. After flashing finished, disconnect the cable and start the phone
I mostly followed the guide from this thread: http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893.
Hope this helps.
Click to expand...
Click to collapse
Since flashtool layout changed, i checked boxes as in attached picture, rest of the steps are exactly the same...
Can someone help? Why would camera not work with unrooted STOCK 14.6.A.1.236 flashed via EMMA or Flashtool. I have unlocker bootloader.
edit: I'm getting pretty sad, already 8 hours flashing roms in different configs, and nothing helps
edit2: After whole day trying im happy to report my camera finally seems to work!
I've downloaded few different firmware versions via XperiFirm and what worked for me was:
1. downloading in XperiFirm and clean flashing 14.4.A.0.157 firmware
2. tried EasyRoot but it didnt work so i've installed NUT dual recovery in non root version (option 3 in installer)
3. downloading 14.6.A.1.236 firmware (i dont know if it makes a difference but "3 UK" worked for me)
4. created pre-rooted-zip with PRF Creator with 14.6.A.1.236 firmware
5. put flashable zip on sd card
6. reboot into recovery and without wiping anything in recovery, flashed pre-rooted-zip i just put on the card
Even those steps were similar to original instruction, and the rest was indentical
7. After flashing the PRF file, clear cache/dalvik and turn off the phone. Do not switch on
8. While keeping the phone off, start Flashtool then select the lollipop FTF file(I used same 3UK version as I udes to make PRF )
9. Uncheck all options from "Wipe"
10. Under "Exclude", check the PARTITION,TA and SYSTEM
11. Click flash button, while pressing the volume down button connect USB cable to Z1C
12. After flashing finished, disconnect the cable and start the phone
Click to expand...
Click to collapse
and if someone is wondering i did finally check those boxes as in attachment pic when flashing final 14.6.A.1.236 firmware

[Kernel] [Z3+ Single] DRM fixed Stock Kernel-Stock Ver.32.2.A.5.11

DRM fixed Stock Kernel for Version 32.2.A.5.11
1. I just followed a guide by najoor and used the tool developed by tobias.waldvogel. So All Credits to tobias.waldvogel for his superb tool and najoor for his guide.
2. Sony RIC, DM Variety disabled and DRM Fixed, Busy Box installed Stock Kernel
3. Requirement: Unlocked Boot Loader and Stock Ver. 32.2.A.5.11 installed
4. Flash it at your own risk, I am not responsible if it bricks your device.
5. Unpack the Zip and use Fastboot commands to flash Kernel, Recovery.
6. After flashing Kernel & Cutom Recovery, to log into Recovery, press Volume up when yellow LED turns on or Switch On the phone by pressing Power+ Vol Down for a while and release. Latest SU zip can be flashed using Custom Recovery
7. I tested this on my Z3+ (Single) and X-reality working. This is my first upload. Sorry if anyone get trouble by this
Download Link: http://d-h.st/4Ujw [No Recovery & No Super SU installed]
Download Link: http://d-h.st/HzW0 [TWRP Recovery 3.0.2 & Super SU installed] with this you can not update or Uninstall Super SU apk. Trying to update will give continuous SU binary message.
Download Link: http://d-h.st/r6iz [with TWRP Recovery 3.0.2] Flash latest SU zip from the below link using TWRP Recovery
SU Zip Link: Latest SU Zip thread link
All patched Boot images with X-reality working, tested with my Z3+
Credits to :
tobias.waldvogel for his great tool for Kernel Re-packing
IgorEisberg for his great tool of Xperia Firmware Downloader
Androxyde for great Sony Xperia Flash Tool
najoor for his guide
ChainFire for Super SU
Busy Box Team
and TWRP Team for TWRP Recovery
Referred Link:
Kernel Re-packing tool: http://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605
Step by Step Guide: http://forum.xda-developers.com/xperia-z4/general/guide-safe-bootloader-unlock-restore-t3386915

Thanks

thank you bro

Hi,
Would be very grateful if you could direct me to the right TWRP Recovery. The earlier version from this forum takes me back into TWRP recovery it fails to reboot. Thanks

yawo76 said:
Hi,
Would be very grateful if you could direct me to the right TWRP Recovery. The earlier version from this forum takes me back into TWRP recovery it fails to reboot. Thanks
Click to expand...
Click to collapse
https://dl.olivierk.at/ivy/twrp/recovery.img

Thank you .
For taking some time to do that for users of the Z3 + E6553

​
yawo76 said:
Hi,
Would be very grateful if you could direct me to the right TWRP Recovery. The earlier version from this forum takes me back into TWRP recovery it fails to reboot. Thanks
Click to expand...
Click to collapse
Start the phone using power bottom + volume down button. Regular method not working

Download Link: http://d-h.st/HzW0 [TWRP Recovery 3.0.2 & Super SU installed] with this you may not update Super SU apk through Play Store (not tried)
Can confirm that the above works (TWRP Recovery & Super SU). Have root now. Thanks :good::good:

yawo76 said:
Download Link: http://d-h.st/HzW0 [TWRP Recovery 3.0.2 & Super SU installed] with this you may not update Super SU apk through Play Store (not tried)
Can confirm that the above works (TWRP Recovery & Super SU). Have root now. Thanks :good::good:
Click to expand...
Click to collapse
I meant the Super SU apk may not be updated through Playstore, Patched kernel working with TWRP & SU, tested with my Z3+ (single)

Thanks for this kernel. Have now been able to flash latest .11 firmware. Only issue, which isn't a biggie, is bootloop with Luckypatcher. Don't really need it anymore but liked playing with it. Might try with your kernel that just includes TWRP and install supersu separately. Apart from that all is working better than previous version. Better battery and way less heat.
Thanks again. And your English is fine!

can i use this for dual sim version?

bombamanz said:
can i use this for dual sim version?
Click to expand...
Click to collapse
No, Dual version by bruno$0 is available plz check.

DRM fix for 32.3.a.0.372????????????????

Can somebody experienced add Vulkan support on the stock rom so that it can be flashed on my non-root Z3+. Is it even possible?

Links not availables
Thanks for this post my friends, just have a problem with the links, can't download the kernel files

betoesp said:
Thanks for this post my friends, just have a problem with the links, can't download the kernel files
Click to expand...
Click to collapse
links working for me, check your internet / browser once again.

The download isn't working for me as well...
the links OPEN, but when you try to download "fs1.d-h.st took too long to respond."..

¿¿¿MIRRORS??? The server is not working

thank you

[email protected] said:
DRM fixed Stock Kernel for Version 32.2.A.5.11
1. I just followed a guide by najoor and used the tool developed by tobias.waldvogel. So All Credits to tobias.waldvogel for his superb tool and najoor for his guide.
2. Sony RIC, DM Variety disabled and DRM Fixed, Busy Box installed Stock Kernel
3. Requirement: Unlocked Boot Loader and Stock Ver. 32.2.A.5.11 installed
4. Flash it at your own risk, I am not responsible if it bricks your device.
5. Unpack the Zip and use Fastboot commands to flash Kernel, Recovery.
6. After flashing Kernel & Cutom Recovery, to log into Recovery, press Volume up when yellow LED turns on or Switch On the phone by pressing Power+ Vol Down for a while and release. Latest SU zip can be flashed using Custom Recovery
7. I tested this on my Z3+ (Single) and X-reality working. This is my first upload. Sorry if anyone get trouble by this
Download Link: http://d-h.st/4Ujw [No Recovery & No Super SU installed]
Download Link: http://d-h.st/HzW0 [TWRP Recovery 3.0.2 & Super SU installed] with this you can not update or Uninstall Super SU apk. Trying to update will give continuous SU binary message.
Download Link: http://d-h.st/r6iz [with TWRP Recovery 3.0.2] Flash latest SU zip from the below link using TWRP Recovery
SU Zip Link: Latest SU Zip thread link
All patched Boot images with X-reality working, tested with my Z3+
Credits to :
tobias.waldvogel for his great tool for Kernel Re-packing
IgorEisberg for his great tool of Xperia Firmware Downloader
Androxyde for great Sony Xperia Flash Tool
najoor for his guide
ChainFire for Super SU
Busy Box Team
and TWRP Team for TWRP Recovery
Referred Link:
Kernel Re-packing tool: http://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605
Step by Step Guide: http://forum.xda-developers.com/xperia-z4/general/guide-safe-bootloader-unlock-restore-t3386915
Click to expand...
Click to collapse
Link broken,,,please reupload