Develop Bugs

Fastboot - No mainver

Hello,i'm going to flash a new rom and firmware, and while I checked some information, I realized that i have no mainver....
also i have noticed that OS line in the bootloader screen is blank ....
sorry for this awful pic ....
http://oi61.tinypic.com/2rdhs0m.jpg
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ---------------------
(bootloader) imei: ------------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.030s
is this a known bug or something else ?
thanks in advance

Yes its because of a custom recovery "bug". Reflash the (original) firmware and check for the changed TWRP recovery which should fix that the main doesn't disappear

oh thanks....
since i noticed that you are the O.P of this thread that i was reading before discovering the bug Collection of Stock Backups
let me ask another question, can i just put one of those stock backups on my sdcard and flash it trough philz recovery?
i'm on 1.54.401.5 Root S-OFF and unlocked bootloader
i want to flash this "2.22.401.5 - CWM Philz touch Thanks to MATRIKS"
is it correct ?

[Q] New with M8, unlocked, trying OTA with no success

There's a new OTA this morning but when I try to run it it brings me to bootloader. (unlocked, rooted, never flashed a custom rom)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 23c984e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.010s
From what I read, I need to install the proper recovery, relock and then update. Problem is, I can't find the proper number for my version. I read I can use a lower number but when I tried it told me it failed security signature. Any help would be appriciated.
Should I just go to a custom 4.4.4 like pac or paranoid? Not my first android just never seen this issue but then again, only usually did this after support stopped on my phones.

You need a stock recovery and stock rom to flash the OTA.
Try to flash stock recovery for your CID and retry
Yuskow said:
There's a new OTA this morning but when I try to run it it brings me to bootloader. (unlocked, rooted, never flashed a custom rom)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 23c984e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.010s
From what I read, I need to install the proper recovery, relock and then update. Problem is, I can't find the proper number for my version. I read I can use a lower number but when I tried it told me it failed security signature. Any help would be appriciated.
Should I just go to a custom 4.4.4 like pac or paranoid? Not my first android just never seen this issue but then again, only usually did this after support stopped on my phones.
Click to expand...
Click to collapse

Yuskow said:
There's a new OTA this morning but when I try to run it it brings me to bootloader. (unlocked, rooted, never flashed a custom rom)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 23c984e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.010s
From what I read, I need to install the proper recovery, relock and then update. Problem is, I can't find the proper number for my version. I read I can use a lower number but when I tried it told me it failed security signature. Any help would be appriciated.
Should I just go to a custom 4.4.4 like pac or paranoid? Not my first android just never seen this issue but then again, only usually did this after support stopped on my phones
.
Click to expand...
Click to collapse
You can also grab the stock recovery.img from the OTA that you downloaded. Instead of "installing" it select "install later" and copy the OTA.zip to computer(you can find OTA.zip in downloads folder on internal storage). You can then extract the ota.zip, inside it you'll find the firmware.zip, extract that one and inside the firmware.zip you'll find the stock recovery.img. Sounds like a lot of effort but it's pretty simple...
If you're planning on going to 4.4.4 custom ROM it should probably be an AOSP one and not Sense based. You'll need 4.4.4 firmware to have sense based ROMs work correctly, if you don't have it then y ou'll have issues with radio(bluetooth, wifi, data etc) not working. As far as I know that problem doesn't occur with AOSP but I'm not willing to bet anything on it

Thanks guys. Think I posted too soon. Relocked phone before flashing proper recovery. Working on that now.
Will give both methods a try.
Edit: took the recovery update, relocked and did the ota. All is great Thanks again.

Yuskow said:
took the recovery update, relocked and did the ota.
Click to expand...
Click to collapse
Relocking the bootloader is not necessary to install OTA.

[Q] Wifi cannot be enabled

Long story short, I updated to a lollipop ROM recently with no issues flashing, but in the new ROM when I attempt to turn on the wifi, it grays out the button as if pressed and then does nothing and stays off. I have s-off and am running CWRM v6.0.4.8. I've googled around and read that it may be tied to firmware incompatability, however my camera app and all other apps on the phone work fine. Before flashing to lollipop I was running kitkat. Did I forget to update something? Carrier is Verizon.
http://forum.xda-developers.com/showthread.php?t=2723159 - firmware used to update
http://forum.xda-developers.com/showthread.php?t=2732877 - ROM used
Phone informantion from fastboot-
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 0.89.20.0321
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.605.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA46CSF02250
(bootloader) imei: 990004997370006
(bootloader) imei2: Not Support
(bootloader) meid: 99000499737000
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f2489bd1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.100s​

Might try flashing the FW again. Or reflashing the ROM. Maybe even a cache/dalvik cache wipe would fix it too.

How do I update to Marshmallow on a rooted Bell HTC One M8?

I realize this is probably asked fairly often, but I did try to find the answer myself. So I thank you and apologize in advance.
In any case, I've been using lollipop for some time on my M8 now. It is rooted and S-On. As a result, I can't simply OTA up into Marshmallow. I bought this phone used, and I believe it was Bell, but I'm uncertain. I was hoping to update to Marshmallow (and keeping my files intact if that is at all possible), but am totally at a loss as to what I should be doing. For one, not a whole lot of threads about Bell, so I'm unsure what files I should be using, but beyond that if someone could give me a nudge in the right direction, I'd really appreciate it.
To get things started, my fastboot getvar all is:
Code:
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.666.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH445WM-----
(bootloader) imei: --------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.060s

You can unroot it within supersu app itself.
Then restore system & boot only from non-rooted 4.20.666.1 backup and keep your data, install 4.20.666.1 stock recovery.img. You'll receive OTA up to Marshmallow with your data intact.
You can have all those in my thread : http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860

Thank you, everything worked out perfect, though it took a little longer than I thought it would. One issue though, it seems maybe the radio is weaker? I can't get to LTE most of the time in places I had no trouble with before.
For anyone going through the same thing, if Sense is crashing after your update, just go into settings, apps and clear out the data for Sense.

No idea about the radio matter .. maybe an updated fastboot getvar all can tell something if not correctly done.

ckpv5 said:
No idea about the radio matter .. maybe an updated fastboot getvar all can tell something if not correctly done.
Click to expand...
Click to collapse
Well my fastboot getvar now is:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.666.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH445---------
(bootloader) imei: -------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s
It's definitely having some trouble getting up to LTE, but it does connect to LTE once in a blue moon so its not the APN or something stupid like that.

RUU flash failed, stuck in fastboot s-on, relocked

I've spent all day trying to get my M8 (Sprint)unrooted and back to stock. I followed countless tutorials that involved locking the bootloader then running the RUU installer. Everything usually works up until i have to use the RUU, which always fails. I've tried a ton of different versions that all say they're for the sprint m8 but they always have an error and say to get the correct rom or something like that.
Any help is much appreciated
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA46PSF01708
(bootloader) imei: 990004992423669
(bootloader) imei2: Not Support
(bootloader) meid: 99000499242366
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0f94b3b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.022s

Everything you need & how-to : http://forum.xda-developers.com/showthread.php?t=2729173
Step 1. Install signed firmware
Step 2. Install RUU