Hello.
I installed CM 12. when I get a call or place a call the in call volume is really low (even though I turn the volume all the way up using the buttons). Is there away to fix this?
My device is a5chl VM
xashleychx said:
Hello.
I installed CM 12. when I get a call or place a call the in call volume is really low (even though I turn the volume all the way up using the buttons). Is there away to fix this?
My device is a5chl VM
Click to expand...
Click to collapse
You can fix that...you have to modify the HTML script in your file browser but after if you update your device, you gonna lose that setting
just update it... today they fixed it. look at the chance log.
OP check this link out here http://review.cyanogenmod.org/#/c/86918/
If you don't know what that means, basically redownload the ROM because the problem was fixed in the last nightly.
Thanks every one.
I have not been on in a while, I'm going to reinstall the rom.
Related
So i have started encountering a problem in which about 3 minutes into a phone call my phone freezes and then ultimately turns off and only way to turn it back on is removing the battery and then power button.
I have had this problem on every rom starting on CM. After it happened on this rom i flashed juggs, beast, and da bomb (or whatever) and everyone it still happened. I wiped data, cache and delvik before every flash but this did not help.
I eventually just odin back to stock with the stock tar that is posted somewhere in this forum. This still has the problem. I found that it generally happens if i move from my ear and the screen turns on and then it wont turn back off and no menus are available (ak i cant get into dialer if i call bank or 800 number to input a number) and then it just completely freezes and turns off.
Any help with this would be great. I mean making phone calls is probably the most important part of a "phone" working. So i really need this to be fixed asap. thanks
jr8801 said:
So i have started encountering a problem in which about 3 minutes into a phone call my phone freezes and then ultimately turns off and only way to turn it back on is removing the battery and then power button.
I have had this problem on every rom starting on CM. After it happened on this rom i flashed juggs, beast, and da bomb (or whatever) and everyone it still happened. I wiped data, cache and delvik before every flash but this did not help.
I eventually just odin back to stock with the stock tar that is posted somewhere in this forum. This still has the problem. I found that it generally happens if i move from my ear and the screen turns on and then it wont turn back off and no menus are available (ak i cant get into dialer if i call bank or 800 number to input a number) and then it just completely freezes and turns off.
Any help with this would be great. I mean making phone calls is probably the most important part of a "phone" working. So i really need this to be fixed asap. thanks
Click to expand...
Click to collapse
Looks like it might be a kernal problem. Have you flashed back to the stock kernal? If not, I'd look there first
yeah i flashed stock kernal as well...problem still persist
uninstall Google+
no google + never have had it.
Have you tried flashing CM7 Alpha #2? I had that same problem with Alpha #1 release then flashed #2 fixed permissions. Then at first start up i rebooted with GPS on and voila! No more phone FC.
I started with Alpha #1 where the problem started flashed over #2 fixed permissions and same problem. thats when i started flashing the other roms to try to solve the problems but this hasnt helped. So i odin back to stock. flashed stock kernal and stock recovery. and i still have the problem.
What sucks is im just graduating college and im starting to receive calls from future employers and i cannot talk for more then 2 minutes before my phone decides to shut off.
So any other advice???
bump it up. Any help please...::
what it is doing now update: I click on a contact or type a number and press call and the screen turns black except the status bar. soft keys dont work, hard keys dont work. phone is a fail. people can still hear me and i can still hear them but the phone is unusable and i have to pull battery to get out of the black screen.
This was doing it on every rom and i have now put beastmod v2 4.0 still no luck :[
I just received my White GS2, finished the OTA update.
And yes, the dialer FC on me every single time once I push the hangup button.
I have installed cyanogenmod 7.1 on my T-Mobile Samsung Galaxy S2. Problem is whenever I install a theme, my mic/ speaker on the phone doesn't work. And if I try to restore a backup file using ROM manager, it says MD5 mismatch error. Even when I revert the original wallpaper back, people can't hear me on calls, and I don't hear them. Master resetting the device fixes the issue. Is there any solution, I don't want to be stuck on using just 3 themes that are included.
Only happens to themes downloaded from market. All cm7 themes.
http://forum.xda-developers.com/showthread.php?t=1367547
Hope that helps
Hi .thanks for your response. It works for some time then goes back to mute status. Is that a known problem with CM7.2?
tarek972 said:
Hi .thanks for your response. It works for some time then goes back to mute status. Is that a known problem with CM7.2?
Click to expand...
Click to collapse
Yes it isbut only for our device right now
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Which date of cm10.1 did you flash? You need to give more details. Flash a custom kernel? What's your radio you're using?
Denta87 said:
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Click to expand...
Click to collapse
I've had exactly the same problem, using the CM 10.1 RC5a.
Bluetooth will do as you described - be disabled, when clicked on, will jump to off again.
Restarting always fixes it momentarily.
If BT is on, and successfully connects to my car, and I'm able to place a call, first no one can hear me, the call is dropped, and BT shuts off to remain permanently disabled til I reboot the system.
After a reboot, its usually ok for a couple hours.
Lots of other users are having the same problem....
Denta87 said:
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Click to expand...
Click to collapse
Also, flashing this fix now, will report back:
http://forum.xda-developers.com/showthread.php?t=2174100
I wiped dalvik/cache, flashed the BT fix, fix permissions, then rebooted.
Just CM 10.1 RC5a, UVMC6 radio, I upgraded firmware using the UVMC6.aio.tar.md5 file made by Mikeyman
Hope it works - really tired of having to reboot every time i want to make a call over BT car audio...
HISTORY oforoub
aaronchili said:
Also, flashing this fix now, will report back:
http://forum.xda-developers.com/showthread.php?t=2174100
I wiped dalvik/cache, flashed the BT fix, fix permissions, then rebooted.
Just CM 10.1 RC5a, UVMC6 radio, I upgraded firmware using the UVMC6.aio.tar.md5 file made by Mikeyman
Hope it works - really tired of having to reboot every time i want to make a call over BT car audio...
Click to expand...
Click to collapse
36 hours on this and no BT crashes!
Faster connection to car audio, and call stability is much better.
Also remember after reboot to delete all devices, and re-add them.
Hello World
I'm a OpGP user in Korea. I don't use E98X like most of you guys. I use F240(which is basically the same thing except the antenna... or not?)
I recently downloaded Harmony 12/10 ROM and I flashed it to my device
It works perfectly EXCEPT the dialer app. I can dial but I can't call.
You know how a when you press call a new screen appears like a new app? That seems to be the problem. My phone freezes for a couple of seconds and then reboots.
I tried changing the dialer.apk but it won't work. HELP
BlehF240 said:
Hello World
I'm a OpGP user in Korea. I don't use E98X like most of you guys. I use F240(which is basically the same thing except the antenna... or not?)
I recently downloaded Harmony 12/10 ROM and I flashed it to my device
It works perfectly EXCEPT the dialer app. I can dial but I can't call.
You know how a when you press call a new screen appears like a new app? That seems to be the problem. My phone freezes for a couple of seconds and then reboots.
I tried changing the dialer.apk but it won't work. HELP
Click to expand...
Click to collapse
Also, no audio. Not just in phone calls, not at all.
BlehF240 said:
Also, no audio. Not just in phone calls, not at all.
Click to expand...
Click to collapse
Have you got a backup? I would make sure everything was working well there first.
If you have already factory wiped and still getting this same error, then you might want to backup your files to your computer and format internal SD then factory reset again, then sideload a ROM.
If you are failing to get audio working for any ROM including stock then it is a fault
I have been looking for a solution to this problem for weeks and have found nothing that will fix it.
I am currently on CM11-M3, and have had the problem since 10.2. No matter what ringtone I select it will not play during an incoming call.
I have been testing with wheresmycellphone.com. Ehen a call comes in the phone will vibrate once and very rarely the ringtone will play for a fraction of a second, but most of the time there is no sound. I have noticed that the mute icon (speaker with a line through it) flashes in the notification area briefly the second the phone starts ringing.
Does it be behave the same way on other custom and stock ROMs?
Are you clean flashing?
audit13 said:
Does it be behave the same way on other custom and stock ROMs?
Are you clean flashing?
Click to expand...
Click to collapse
I dirty flashed 10.2 from 10.1, I did a clean install when I switched to CM11, every flash since has been with a cache/dalvik wipe. I have not yet tried a rom beyond CM.
You should try another ROM, even if it is based on CM11 to see what happens.
audit13 said:
You should try another ROM, even if it is based on CM11 to see what happens.
Click to expand...
Click to collapse
I will when I get a moment. I need to be accessible for work right now so I can't risk any excessive off time just yet.
zero|fade said:
I will when I get a moment. I need to be accessible for work right now so I can't risk any excessive off time just yet.
Click to expand...
Click to collapse
Well, I finally got off my ass to try fixing this again. I was going to try installing SlimKat, and as prep I wiped cache, dalvik and then factory reset. I rebooted to try receiving a call before I started work on flashing the rom and the phone now rings fine. I have no idea what changed, I had tried a factory reset on M2 and it didn't fix the issue. This is the first factory reset I applied to M3 though.