I have installed cyanogenmod 7.1 on my T-Mobile Samsung Galaxy S2. Problem is whenever I install a theme, my mic/ speaker on the phone doesn't work. And if I try to restore a backup file using ROM manager, it says MD5 mismatch error. Even when I revert the original wallpaper back, people can't hear me on calls, and I don't hear them. Master resetting the device fixes the issue. Is there any solution, I don't want to be stuck on using just 3 themes that are included.
Only happens to themes downloaded from market. All cm7 themes.
http://forum.xda-developers.com/showthread.php?t=1367547
Hope that helps
Hi .thanks for your response. It works for some time then goes back to mute status. Is that a known problem with CM7.2?
tarek972 said:
Hi .thanks for your response. It works for some time then goes back to mute status. Is that a known problem with CM7.2?
Click to expand...
Click to collapse
Yes it isbut only for our device right now
Related
I updated to 3.0.3 yesterday and since then I haven't been able to answer calls.
android.phone keeps crashing
any ideas?
What did you install on top of it/what did you delete from it?
'Cause if that was a general bug with the ROM, it'd be all over the thread...
I have revolution HD theme installed on top
i can make calls but can't answer them
I'd go for a reflash of the ROM without flashing the theme. If the problem disappears, you have your reason right there
I get that problem when I flash ports to my phones. Usually the ROMs built for the actual device have less problems. I generally stick with those.
I had that problem with the stock ROM during the final bits of its life. I had to wait like half a minute for the touchscreen to start responding. It would work fine then.
Download the latest version of the theme, the FC problem with phone.apk has been fixed.
airsick said:
I get that problem when I flash ports to my phones. Usually the ROMs built for the actual device have less problems. I generally stick with those.
Click to expand...
Click to collapse
Dude, LeeDrOiD HD isn't a port...
Hi everyone,
I just updated my Galaxy note 2 with the latest ARHD 9.2, coming from 9.1, without wiping. The fact is the bottom buttons are not vibrating anymore...
I tried to flash the ROM again, but still it doesn't vibrate. I already made sure that the vibration was enabled in the sound settings, tried to deactivate it and reactivate.
Is anyone having the same issue? Could somebody help me with this?
Thanks.
Try Reflashing ROM with a Full Wipe
OK, that's what I wanted to avoid... But I guess I have no other choice...
I'll do that and keep you updated ! Thanks
OK, just wiped my phone and flashed the ROM again, and... you were right! It works!
Just need to restore all my apps now...
Thanks for your support.
Topic closed!
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Which date of cm10.1 did you flash? You need to give more details. Flash a custom kernel? What's your radio you're using?
Denta87 said:
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Click to expand...
Click to collapse
I've had exactly the same problem, using the CM 10.1 RC5a.
Bluetooth will do as you described - be disabled, when clicked on, will jump to off again.
Restarting always fixes it momentarily.
If BT is on, and successfully connects to my car, and I'm able to place a call, first no one can hear me, the call is dropped, and BT shuts off to remain permanently disabled til I reboot the system.
After a reboot, its usually ok for a couple hours.
Lots of other users are having the same problem....
Denta87 said:
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Click to expand...
Click to collapse
Also, flashing this fix now, will report back:
http://forum.xda-developers.com/showthread.php?t=2174100
I wiped dalvik/cache, flashed the BT fix, fix permissions, then rebooted.
Just CM 10.1 RC5a, UVMC6 radio, I upgraded firmware using the UVMC6.aio.tar.md5 file made by Mikeyman
Hope it works - really tired of having to reboot every time i want to make a call over BT car audio...
HISTORY oforoub
aaronchili said:
Also, flashing this fix now, will report back:
http://forum.xda-developers.com/showthread.php?t=2174100
I wiped dalvik/cache, flashed the BT fix, fix permissions, then rebooted.
Just CM 10.1 RC5a, UVMC6 radio, I upgraded firmware using the UVMC6.aio.tar.md5 file made by Mikeyman
Hope it works - really tired of having to reboot every time i want to make a call over BT car audio...
Click to expand...
Click to collapse
36 hours on this and no BT crashes!
Faster connection to car audio, and call stability is much better.
Also remember after reboot to delete all devices, and re-add them.
Hello World
I'm a OpGP user in Korea. I don't use E98X like most of you guys. I use F240(which is basically the same thing except the antenna... or not?)
I recently downloaded Harmony 12/10 ROM and I flashed it to my device
It works perfectly EXCEPT the dialer app. I can dial but I can't call.
You know how a when you press call a new screen appears like a new app? That seems to be the problem. My phone freezes for a couple of seconds and then reboots.
I tried changing the dialer.apk but it won't work. HELP
BlehF240 said:
Hello World
I'm a OpGP user in Korea. I don't use E98X like most of you guys. I use F240(which is basically the same thing except the antenna... or not?)
I recently downloaded Harmony 12/10 ROM and I flashed it to my device
It works perfectly EXCEPT the dialer app. I can dial but I can't call.
You know how a when you press call a new screen appears like a new app? That seems to be the problem. My phone freezes for a couple of seconds and then reboots.
I tried changing the dialer.apk but it won't work. HELP
Click to expand...
Click to collapse
Also, no audio. Not just in phone calls, not at all.
BlehF240 said:
Also, no audio. Not just in phone calls, not at all.
Click to expand...
Click to collapse
Have you got a backup? I would make sure everything was working well there first.
If you have already factory wiped and still getting this same error, then you might want to backup your files to your computer and format internal SD then factory reset again, then sideload a ROM.
If you are failing to get audio working for any ROM including stock then it is a fault
Merry Christmas to all!
JLM, have posted similar on your other site.
Having a problem with the BrokenPop 5.0.2 on my L900 (Sprint Note2)
I can't seem to dial out with this rom. I get popup saying 'Unfortunately, Dialer has stop"
Are others seeing this problem? Is this an rom issue or a setup issue on my end?
I don't expect a daily driver from an early alpha of this rom and do expect issues but I would hope that I can at least make phone calls, after all, the Note 2's primary function is a phone
What I have done so far.
DL and installed rom twice. Both DL check via MD5 OK
Using Philz 6.07.9 recovery
1. Backup internal sdcard to pc
2. Factory reset / Install new rom option
3. Wipe/format internal sdcard
4. Reboot recovery (selected yes to restore root notification)
5. Install rom
6. Boot rom
7. Boot into recovery
8. Flash Gapps
9. Did minor setup of things like Wifi, Google Login, Play Store, DL ES File Manager.
10. Try to make phone call using dialer (phone icon) and get 'Unfortunately, Dialer has stop"
11. DL another free dialer from Play Store.. same error message.
I'm open to suggestions on how to get this to work.
I do like what I see from my little tour around this rom, but not being able to make calls is a major issue for me even for an alpha release. For now I have fallen back to my trusty Community Rom 4.4.2 which has been rock solid for me.
Thanks
bump.... a few people have viewed this posting .. anyone else having this problem? I have since try to install once again.. had some limited success with dialer, but then problem returns. even made a nandroid of when it was working.. still my favorite early lollypop rom for the l900
I installed Broken5.0.2, ran it for 24, and found it seemed to be one of the least reliable functioning loli roms for L900. I personally am preferring the LiquidSmooth 12-23 nightly. The LS rom has overcome the wifi/screen off hotboot bug, the keyboard bug, but still needs the manual GPS fix. Right now it offers hands down the most functioning options at this particular time and the phone is semi reliable??? Lol its doesnt FC but its buggy.
My two cents ... Cheers!
I've tried LiquidSmooth 12-23 nightly also.. one thing I had issues with was I have a OTG usb drive and did not find a way to unmount it. Did you find that function anywhere in LS?.. Other issue I have is no XPOSE support right now.. and I'm not a fan of the AOSP messaging pgms. Lots of things I don't like about TW .. but they make a nice messaging pgm
I did see a semi-workaround where you click on the carrier setting and it kinda resets the capability to make calls.. kinda hokey.. but it seems to work.. Lolllypop is still very early.. and I guess these are the growing pains for being alpha testers. Hopefully over time it will get more mature. Back on 4.4.2 for now.. everything works.. the thing is huge.. over 2gb nandroids using high compression.. but hey, everything works.. Thanks for responding.