[Q] Q & A BrokenPop [5.0.2][official] Dialer not working ? - Sprint Samsung Galaxy Note II

Merry Christmas to all!
JLM, have posted similar on your other site.
Having a problem with the BrokenPop 5.0.2 on my L900 (Sprint Note2)
I can't seem to dial out with this rom. I get popup saying 'Unfortunately, Dialer has stop"
Are others seeing this problem? Is this an rom issue or a setup issue on my end?
I don't expect a daily driver from an early alpha of this rom and do expect issues but I would hope that I can at least make phone calls, after all, the Note 2's primary function is a phone
What I have done so far.
DL and installed rom twice. Both DL check via MD5 OK
Using Philz 6.07.9 recovery
1. Backup internal sdcard to pc
2. Factory reset / Install new rom option
3. Wipe/format internal sdcard
4. Reboot recovery (selected yes to restore root notification)
5. Install rom
6. Boot rom
7. Boot into recovery
8. Flash Gapps
9. Did minor setup of things like Wifi, Google Login, Play Store, DL ES File Manager.
10. Try to make phone call using dialer (phone icon) and get 'Unfortunately, Dialer has stop"
11. DL another free dialer from Play Store.. same error message.
I'm open to suggestions on how to get this to work.
I do like what I see from my little tour around this rom, but not being able to make calls is a major issue for me even for an alpha release. For now I have fallen back to my trusty Community Rom 4.4.2 which has been rock solid for me.
Thanks

bump.... a few people have viewed this posting .. anyone else having this problem? I have since try to install once again.. had some limited success with dialer, but then problem returns. even made a nandroid of when it was working.. still my favorite early lollypop rom for the l900

I installed Broken5.0.2, ran it for 24, and found it seemed to be one of the least reliable functioning loli roms for L900. I personally am preferring the LiquidSmooth 12-23 nightly. The LS rom has overcome the wifi/screen off hotboot bug, the keyboard bug, but still needs the manual GPS fix. Right now it offers hands down the most functioning options at this particular time and the phone is semi reliable??? Lol its doesnt FC but its buggy.
My two cents ... Cheers!

I've tried LiquidSmooth 12-23 nightly also.. one thing I had issues with was I have a OTG usb drive and did not find a way to unmount it. Did you find that function anywhere in LS?.. Other issue I have is no XPOSE support right now.. and I'm not a fan of the AOSP messaging pgms. Lots of things I don't like about TW .. but they make a nice messaging pgm
I did see a semi-workaround where you click on the carrier setting and it kinda resets the capability to make calls.. kinda hokey.. but it seems to work.. Lolllypop is still very early.. and I guess these are the growing pains for being alpha testers. Hopefully over time it will get more mature. Back on 4.4.2 for now.. everything works.. the thing is huge.. over 2gb nandroids using high compression.. but hey, everything works.. Thanks for responding.

Related

[Q] LiteROM 0.8.4 issues

Hi there, since I'm not obligated to post replays under development thread here's the place to do it.
I just installed newest version of LiteROM (used 0.7 previously) and I found some unpleasant behaviors.
First of all - I couldn't get wifi connection to work. Password was ok but it continuously tried to authenticate or get proper ip. Re-flashing with stock rooted rom, then gettin literom over it worked like a charm.
But, after installing newest LiteRom I'm getting message every time I reboot device: ... android.process.acore has stopped working.
Also, when trying to set lockscreen wallpaper it gets me a message: ... TwWallpaperChooser has stopped.
So, is there any proper fix to get things right or maybe I'm doing it wrong?
(I did full wipe before all installations but it does not resolve issues)
First, you might try downloading the ROM again(preferably from a pc) to see if maybe the download was bad.
Sent from my jelly monster.
Already did. Then reflash with FULL wipe - nothing. As long as sim card isn't on, there's no issue with .acore (it happens even when switching airplane mode on/off). I also tried to wipe contact and contact manager data but with no good solution.
Another thing is - I've tried IcePop rom and it worked fine. IMHO, there's something in literom that causes such bad behavior.
I would be grateful for helping me resolve that :good:
Hmmmm. The only problem when i flashed literom is if i didnt install the stock gallery then it seemed to crash the lockscreen wallpaper when trying to choose a wallpaper from settings and did not give me and option in quickpic.
Sent from my jelly monster.

ParanoidAndroid 4.4.2 Kit Kat

Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
bytes-zn said:
Hello guys,
I've been using the Beta 4.0 for a while now and it works brilliantly, so I saw an update beta 3 I had to download it.
It has some bugs, not much apps like how you get in the beta, gapps not installing and my data is off but it is switched on.
Having a android phone with no gapps and data is useless, it's like having a nokia 3310, just phone text and that's it.
Please fix if possible.
Thanks
Click to expand...
Click to collapse
Redstarr1 said:
I installed PA 4.0 Beta 3 as well (yesterday) and I have none of the bugs you're describing: data (3G/2G) works, and Gapps not installing, that depends ENTIRELY on which Gapps you are using. I'm using the latest PA Gapps complete package (23/01/2014) and they just installed for me. So both of the bugs that you're experiencing are only on your end. Are you absolutely sure you set the Data icon correctly, because since Beta 3 PA uses a new Quicksettings systems. See in your systems if it's really working. Also check if your APN is still correct. Download and install the latest version of PA Gapps. If that still doesn't work, you should do a clean install (even though I didn't, I'm coming from CM11 Beta 3, just flashed the latest Gapps and PA 4.0 Beta 3 and everything was good to go).
To be honest you're being rude here and you obviously only tried installing everything once. Well this is a custom ROM scene and you need to do an effort yourself. What I see now is that you're using a "thumbs-down"-icon which is extremely discouraging, comparing this phone to an old dumb phone is also completely out of line because WiFi still works, and there are a ton of other things you could still do even without Gapps and data. This post just smells of you having a sense of entitlement, but don't forget that we're not paying deedwar. If a dev decides not to release a ROM that's very sad and it's all due to threads like these.
So what I'd like you to do now is rephrase your OP, use a positive icon and maybe we can turn this wasted thread into a discussion thread for PA Nozomi instead of a shouting contest.
Click to expand...
Click to collapse
That is very well said redstarr1 but i dont quite feel as strongly about it as you. I just see it as a logical statement. However it would help if you can expand on your issues somewhat. Did you do a clean install (wipe data / system / cache / dalvik) or just a dirty flash over the top. What network do you connect too and have you tried Changing your carrier in "access point names". Creating a whole thread for an issue but not elaborating on what you have and havent tried really makes it hard to help.
Beta 5
Hi guys,
The latest update beta 5 works just fine but a few bugs.
Sometimes the back button doesn't work, have to restart the phone for it to start working again.
When charging the wireless is activated, and the battery takes longer to charge.
The phone lags now and then but other than that works fine.
If anyone who can post this on the Xperia S development thread I would really appreciate it, I don't have rights to post on the development thread as yet.
Thanks
Beta 6
Hi guys,
The new update of Beta 6 for Paranoid is brilliant.
After the 1st boot the phone is a little slow but after the rom has settled it's very smooth.
So far all I have tested works perfectly, don't like the launcher much though, so I have my own custom launcher, Next launcher works brilliantly and very customizable. The new launcher's that are added aren't very good and would like if they could get the original launcher if possible.
Other than that all is well.
Thanks Paranoidanroid.
Pa beta 4.3 13052014
Thanks deedwar...the rom(PA 4.3 Beta 13052014) works like a charm. My battery lasts for a day...with data on(3G)....although there is issue of random reboots and the date setting to 1972th year...but i think it will be resolved in the next version i.e. Beta 5/6....Love your work..really appreciate it. :good:
Beta 6
Beta 6 is out..!! Great...!! Trying it now..!!
What about VOIP apps(Viber, line etc.) ? do they work on the latest build ? Cheers.
The latest build
Yes, the VOIP does work..(Viber, Skype etc.,)on the latest builds ..however, I am having a few system UI crashes while using option of any app from the notification bar..like when you're downloading an app from Playstore and which you wish to stop or pause from the by pulling down the notification bar. or using controls of the stock android walkman app.
---
is this room can accept for xpeeria sl lt26ii
plz help me ti find room to my phone 4.4.2
and how can use this room to my phone
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
agugar said:
I had installed beta 4. A few days ago I installed beta6 but after install and reboot sony logo appears and mobile does nothing more. I restored a backup and today I tried to install beta7 with the same problem. Has anyone the same problem or have any idea to solve it?
Click to expand...
Click to collapse
mgrinwis said:
How did you install the ROM?
I assume you did wipe cache and dalvik cache before flashing any ROM since you've installed several ROMs. If not, please do so.
Try flashing (with fastboot) a new kernel (twrp or cwm) followed by: (1) factory reset, (2) wipe cache, (3) wipe dalvik cache and then (4) install PA Beta 7.
Click to expand...
Click to collapse
I did factory reset, wipe cache and wipe dalvik but It didn't work.
I had some troubles trying to restore an old backup after the last failed installation. After the failed restore I tried to install Beta 7 again and It worked. I do not know why, but now I have beta7 working perfectly.
Thanks for your help.
problem with Ant+ on Paranoidandroid 4.3
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
rednose2 said:
Yesterday I install Paranoidandroid 4.3 [BETA 7] - and i have problem with ANT+. it don't work. Is there any possibility to repair that.
Click to expand...
Click to collapse
Unfortunately, ant+ does not work with android version 4.3 and onwards. This has something to do with the drivers I believe (not sure though). So it doesn't matter which ROM you try: all 4.3.x or 4.4.x will not have ant+ support...
Having FCs updating from beanstalk to paranoid
Hey guys! I recently have the beanstalk rom of deedwar for the Acro S and using the current stable build of the rom which is 4.4.278 then i want to try paranoid so heres what i did
1. I copied the paranoid zip file to my phone
2. Flashed the IMG file from the latest version of paranoid rom via Fastboot mode (i extracted it first)
3. Cleared system, factory reset, cache and dalvik cache
4. Installed the zip file
Well it worked and i have the rom but i experienced random FCs so i just reverted back to stock 4.1 ROM and also i am having trouble with some APPS too.. some apps install perfectly but sometimes they dont
WiFi problem :/
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
alessandropsbra said:
Hi guys
1st - this is a greater rom ever! congratulations
2nd - my wifi works (sometimes) - why sometimes ? because i turn on the wifi on job, ok working connected, when i go to a local whitout wifi, my phone scan the ssids and freeze, when i remember to turn off wifi in my home (lol), that ssids continue on screen, they will disapear only i reboot my phone, can i do anything?
thanks a lot for help
Click to expand...
Click to collapse
i installed a new kernel, now wifi works.

[Q&A] [ROM] [4.4.4] SlimKat (d2tmo) Stable 7.0

Q&A for [ROM] [4.4.4] SlimKat (d2tmo) Stable 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Does this weekly fix the inverted Tilting ? temple run does and other apps that require accurate tilting do not work correctly doodle jump is affected to. I don't think a bug report should be done since it is so easy to test and it was a clean flash from the first 8.0?
Just to be sure I have a tmobile galaxy s3 t999l rooted ,
i put slim full gapps 4.4.4 build 8x -28.2 and
slim d3lte 4.4.4 build 7.0 official 5979 - on sd card
is this they way to go ? before i proceed?
what is the best rom installer to use, im having trouble getting a custom recovery to boot . and is there a tutorial/ step by step ? thanks chefno2
chefno2 said:
Just to be sure I have a tmobile galaxy s3 t999l rooted ,
i put slim full gapps 4.4.4 build 8x -28.2 and
slim d3lte 4.4.4 build 7.0 official 5979 - on sd card
is this they way to go ? before i proceed?
what is the best rom installer to use, im having trouble getting a custom recovery to boot . and is there a tutorial/ step by step ? thanks chefno2
Click to expand...
Click to collapse
Sorry but you need a custom recovery. Personally I suggest TWRP. You need to read these two threads carefully in order to correctly do things:
-[INFO] [FAQ] Galaxy S3 w/ LTE - SGH-T999L & SGH-T999N (covering general questions)
- [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates! (this one will explain how to use ODIN for flashing custom recoveries and firmwares)
Any news on when a stable 8.0 will be released?
I am having issues getting the downloaded zip to work. When I go to flash it, it says It "cant open (bad)". Ive tried downloading the rom to my computer and then moving it to the SDcard, via an adapter. Ive tried re-downloading it & emailing it. Ive also tried downloading it via my phone's browser, but it still wont work. Does anyone have any other ideas so to how I can download this without it getting corrupt? Thanks. I have been trying to download Version 7 of the rom, and it seems no matter how I try to get it on my phone I always get "Cant open (bad)" when I go to flash it.
Im having trouble getting any pictures taken with the stock camera to stay on my external SD Card, regardless of what SD Card I put in. Ill take a picture, but once the phone reboots, its gone from my SD Card. I even checked before and after rebooting in Root Explorer. Its there, but then the whole "Camera" folder in DCIM is gone after rebooting the phone. Any suggestions as to how I can get my pictures to stay on my SD Card so I dont fill my internal memory with photos? Running version 7.
NoRingtone get reset when reboot or shutdown. Becomes unknown ringtone. There's something that has to deal with the SD card as far as I know. Because the sounds are on SD card and when I use factory sounds it stays selected when rebooted/shutdown.
---------- Post added at 04:58 AM ---------- Previous post was at 04:57 AM ----------
itsLYNDZ said:
I am having issues getting the downloaded zip to work. When I go to flash it, it says It "cant open (bad)". Ive tried downloading the rom to my computer and then moving it to the SDcard, via an adapter. Ive tried re-downloading it & emailing it. Ive also tried downloading it via my phone's browser, but it still wont work. Does anyone have any other ideas so to how I can download this without it getting corrupt? Thanks. I have been trying to download Version 7 of the rom, and it seems no matter how I try to get it on my phone I always get "Cant open (bad)" when I go to flash it.
Click to expand...
Click to collapse
Try to reformat your sdcard. But save what you want BEFORE you format.
---------- Post added at 05:00 AM ---------- Previous post was at 04:58 AM ----------
you have to let your phone reformat it. Go to setting-storage-unmount SD card-formatt.
boot loop issue
EDIT: Resolved the issue. Pretty sure its unrelated to the rom. Experienced a faulty power button that causes the phone to continuously reboot last year. Thought it went away since i used the power button fine past couple of months, but guess its resurfaced. Jiggling the power button and using an app to power off the phone helps band-aid the issue.
I flashed slimkat 7.0 and gapps about 2 weeks ago following the instructions on the slimroms website using CWM. It's been working great until today where its fallen into a sort of boot loop. I didn't do any major changes to the phone in the past few days so not sure what prompted this since it was working perfectly before. But now every 2 min, it would reboot without warning. During those 2 min, the phone works fine. Please let me know if there is anything I can or should do.
Thanks!
Possible fix for SlimKat Camera Issues
I had the same camera issues that people mentioned in the SlimKat build thread, where all of my camera apps were crashing upon opening, but my camcorder was fine. I tracked it down to have a corrupt image file in my images directory, which I was able to delete using the gallery app. Hopefully this helps someone.
Bluetooth in car doesn't work for Skype, Viber, Hangout Calls
Hi experts!!
I've flashed SlimKat d2lte build 7.0 5979 on my Galaxy S3 (T-Mo) T999 and everything just works great. EXCEPT for these 2 issues:
1. Bluetooth in car doesn't work for Skype, Viber, Google Hangouts Calls Normals phone calls over the network connect perfectly fine.
2. When placing calls over Skype, Viber or Hangouts, the phone makes just 1 ring (albeit showing "ringing" on the screen) but the call connects just fine and I can hear the other person then (ie. the call is placed successfully). The other person confirmed that the call keeps ringing Skype/Viber/Hangouts continuously until answered just normally. But I hear just one outgoing ring and then silence!
I hope I've not messed up some settings somewhere. Pls help!
Cleaned flashed 9.0
I cleaned flashed 9.0 per the installation instructions and now there is no SIM toolkit and Offline APN Database Pro says there is no sim card detected. Is there a way to install the SIM toolkit?
sgh-t999 no SIM PIN unlock and no service with official 9
I originally had SIM lock PIN enabled and working in official 6 and 7. Weekly 8.20 and official 9 do not attempt to unlock. The SIM Card Lock option does not even show up between Encrypt phone and Passwords in the Security screen.
I disabled the SIM Card Lock using a different phone and now official 9 says "no service". bugreport.zip is from this point with unlocked SIM, but no service.
#slimusers told me to post bugreport.zip in official 9 thread. When I attempted to reply to the official 9 thread, I got redirected to this Stable 7.0 thread.
rcpao
PS: forum.slimroms.net registration is broken.
Upgrading from SlimKat Stable 8.0 to Stable 9.0 without losing data, apps & settings
Hi experts,
I just saw that SlimROM posted SlimKat Stable 9.0 release. I am running version 8.0 and would like to upgrade to 9.0 but without losing my data, apps, settings, etc. How do I do that? I do have Ti Bkup Pro but have never really used it to upgrade ROMS.
+1 on the last post. I have installed slimkat 4.4.4 build 7 official since August, and have not had any issue whatsoever and love how it runs. Is it necessary to update? Or if it isn't broken, don't fix it?
A Simplified Beginner's Guide to Rooting, Flashing & Unrooting Your Samsung Galaxy S3
A Simplified Beginner's Guide to Rooting, Flashing & Unrooting Your Samsung Galaxy S3
SlimKat 9.0 Apn settings
Hi, why is it i can't add an Apn setting on my network provider. Each time I add an apn and save it after, it doesn't save. Is this a bug issue? Please help with this issue.. Anyone having similar problems?
T-999 non lte version
I've had issues with other ROMs on my T999 version and CM 11 had a stable build but, I just recently updated (apparently to lte version) because the volume on the headset was really low. I like what SlimKat has to offer but, I need to know if I will run into the same issues without having lte.
not able to make calls
I read a lot about this ROM and wanted to try. Flashing went fine, but I am having basic issue with phone calls.
Before this ROM, I tried LP roms and other 4.3 roms. They were all fine.
Steps done are ODIN flash of root66+Modem, then flashed TWRP, flashed ROM+Gapps.
---------- Post added at 04:24 PM ---------- Previous post was at 04:09 PM ----------
I read a lot about this ROM and wanted to try. Flashing went fine, but I am having basic issue with phone calls.
Before this ROM, I tried LP roms and other 4.3 roms. They were all fine.
Steps done are ODIN flash of root66+Modem, then flashed TWRP, flashed ROM+Gapps.
I am really interested in using this, please help.

General Question about Installation of Custom ROMS on E980

Hello,
My apologies if this was answered before. I was on the stock ROM until a few months ago, but every ROM I tried had flaws that was difficult to deal with in a productive manner. My phone is on the T-Mobile Network.
I am going to post my procedure and my issues, in case I am missing a step.
1. Rooted Phone and installed TWRP via FreeGee
2. From TWRP recovery, I wipe the data from the SD Card partition and paste the ROMs there.
3. Then I wipe the system, cache, etc.
4. Install Custom ROM
5. Install GAPPS
6. Wipe Cache
7. Reboot
Issues:
1. One common issue I am experiencing as that no matter what ROM I use (CyanogenMod / BLISSPOP / SlimLP), I have to install the following patch or else no audio can be heard on either side of the call.
- http://forum.xda-developers.com/optimus-g-pro/general/news-cm-12-e980-lte-phone-t3063079
2. Is there anything that brings back the IR functionality of the phone on a custom ROM? I know many people might not use it, but I used it extensively and miss it lol.
3. Bluetooth doesn't seem to work correctly with Voice Assist.
- I am using the Plantronics Voyager Edge
-- Calls works with no issue
-- The headset works on Apple Devices with no issue.
- However, on my e980 whenever I activate voice assist.. My phone changes to the google voice screen where it is waiting for input but it never hears what I am saying. The dots that usually move as you do not move like it is not taking any audio from me. (I enabled the setting to allow recording from BT devices).
Just got called for work, so not wording everything this the way I initially wanted to. My main concern is #1 issue, no one ever talks about needing that file in the ROM instructions so I am not sure what I am missing. I had some other issues like the black screen of death, but that was resolved by the SlimLP ROM.
I am not sure if the call audio or bluetooth issue sare related to the radio firmware.... which I seen people mention upgrading the radio firmware but not many instructions on how to find and install the right one.
Thank you for your time and any provided information.
damainman2015 said:
Hello,
My apologies if this was answered before. I was on the stock ROM until a few months ago, but every ROM I tried had flaws that was difficult to deal with in a productive manner. My phone is on the T-Mobile Network.
I am going to post my procedure and my issues, in case I am missing a step.
1. Rooted Phone and installed TWRP via FreeGee
2. From TWRP recovery, I wipe the data from the SD Card partition and paste the ROMs there.
3. Then I wipe the system, cache, etc.
4. Install Custom ROM
5. Install GAPPS
6. Wipe Cache
7. Reboot
Issues:
1. One common issue I am experiencing as that no matter what ROM I use (CyanogenMod / BLISSPOP / SlimLP), I have to install the following patch or else no audio can be heard on either side of the call.
- http://forum.xda-developers.com/optimus-g-pro/general/news-cm-12-e980-lte-phone-t3063079
2. Is there anything that brings back the IR functionality of the phone on a custom ROM? I know many people might not use it, but I used it extensively and miss it lol.
3. Bluetooth doesn't seem to work correctly with Voice Assist.
- I am using the Plantronics Voyager Edge
-- Calls works with no issue
-- The headset works on Apple Devices with no issue.
- However, on my e980 whenever I activate voice assist.. My phone changes to the google voice screen where it is waiting for input but it never hears what I am saying. The dots that usually move as you do not move like it is not taking any audio from me. (I enabled the setting to allow recording from BT devices).
Just got called for work, so not wording everything this the way I initially wanted to. My main concern is #1 issue, no one ever talks about needing that file in the ROM instructions so I am not sure what I am missing. I had some other issues like the black screen of death, but that was resolved by the SlimLP ROM.
I am not sure if the call audio or bluetooth issue sare related to the radio firmware.... which I seen people mention upgrading the radio firmware but not many instructions on how to find and install the right one.
Thank you for your time and any provided information.
Click to expand...
Click to collapse
1. That one is because of TMobile, every E980 ROM I know about has same issue... Can't do much, because I'm not sure if including the tmob. fix won't break device for others.
2. Only KK ROMs, I'm trying to port LP QRemote but no luck so far...
3. Havey you tried latest Bliss & Slim builds? Bluetooth quirks and bugs should be gone or minimal now.
ShadySquirrel said:
1. That one is because of TMobile, every E980 ROM I know about has same issue... Can't do much, because I'm not sure if including the tmob. fix won't break device for others.
2. Only KK ROMs, I'm trying to port LP QRemote but no luck so far...
3. Havey you tried latest Bliss & Slim builds? Bluetooth quirks and bugs should be gone or minimal now.
Click to expand...
Click to collapse
Thanks for the reply and for letting me know the reason for the issue is TMobile. It would explain why the issue is not spread further lol. I tried bliss and am running the latest Slim build but my bluetooth headset still can not send commands to android voice a assist. It works flawlessly on apple devices though lol.
Do you know if I should be flashing the firmware for my bluetooth or lte radio?
damainman2015 said:
Thanks for the reply and for letting me know the reason for the issue is TMobile. It would explain why the issue is not spread further lol. I tried bliss and am running the latest Slim build but my bluetooth headset still can not send commands to android voice a assist. It works flawlessly on apple devices though lol.
Do you know if I should be flashing the firmware for my bluetooth or lte radio?
Click to expand...
Click to collapse
Welcome to AOSP, where bluetooth is mostly broken on unpopular and older devices. I've tried updating bluetooth drivers and that brought nothing but troubles; I'm using patched up bluetooth repo for Slim ATM, it should fix most of the problems... That thing is shady... Will see what can be done.

Most stable Rom for LG g-pad 7.0 v410?

Hi, I have the latest CM12 installed in my tablet, but I have a lot of issues, especially when installing multiple apps or if I try to change the Launcher. It gets into boot loop and there is nothing one can do but re-flash the rom, which is pretty annoying. It has happened to me already 3 times in a short while and I am thinking of flashing LineageOS. However, I hear it is still very buggy, especially the issues with wifi. So I would like to ask which is the least buggy Rom for 7.0 v410 or if there is a way to avoid CM12 from getting the problem with boot loop.
Boot loop has been caused when trying to change Launcher (because trebuchet regularly crashes), when installing x-plore file manager and in a clean flash when I attempted to install multiple apps at the same time. In all cases it got stack in boot loop, or would start only to restart after a while, endlessly.
Finally, I opted for LineageOS 14.1.
I had the 11-11 Nightly for some time and seemed fine. Today I updated to 25-11 Nightly. It feels maybe slightly laggy, but still checking it.
I have also installed "Best WiFi Keeper" app from play store and it generally keeps me connected. However, if connection is lost (e.g at restart or if I get out of range), I have to reconnect manually. I tried few apps for reconnecting but nothing worked. It appears that although the WiFi network is seen, the tablet cannot really re-establish the connection automatically.
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Tesla works great for me. I'm running a lollipop version that's still on androidfilehost; I'm not sure if GZR ever got updated beyond 5.1 for V410.
I've had CM 14.1 (long enough ago it was still CM and not LOS) on the tablet, and it felt like it would get laggy. That could just be from junk my kid installs though, but I don't seem to have that problem with Tesla.
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
kingzones said:
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
Click to expand...
Click to collapse
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
jason2678 said:
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
Click to expand...
Click to collapse
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
xdause said:
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
Click to expand...
Click to collapse
I'm on Tesla, but it has the same base as Tipsy. I don't have data on the tablet so it isn't a 100% conclusive test, but it doesn't seem to work. The switch for USB tethering never turns on. Wifi turns on but never connects properly. My laptop does briefly show connection then disconnects with both USB and wifi tethering. It could be because there is no data connection on my tablet, but looking through dmesg on the laptop gives me the impression that something on the tablet isn't working right.
kingzones said:
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Click to expand...
Click to collapse
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
nicospanas said:
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
Click to expand...
Click to collapse
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
KLit75 said:
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
Click to expand...
Click to collapse
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
nicospanas said:
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
Click to expand...
Click to collapse
Thanks. That's more or less what I thought. From what I'm hearing there are some bugs in the roms that no doubt aren't being maintained at this late stage so I think I'll stick with stock (would be nice to have a custom recovery though.)
Not that it matters (a year later) but lots of people root with Kingroot when there isn't another option and there's several ways to remove all the bits left behind and switch it to supersu.
Thanks again!
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
kingzones said:
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
Click to expand...
Click to collapse
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
nicospanas said:
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
Click to expand...
Click to collapse
That would be great.. I shall try.. if successful, I shall post results.
I have a uk410, the US Cellular variant of the v410. I tried the CM12.1 "stable" release cm-12.1-20151117-SNAPSHOT-YOG7DAO1K5-v410.zip found here (archive.org/download/cmarchive_snapshots), along with Open GApps nano for 5.1 (opengapps.org/?api=5.1), and quickly got the infinite rebooting issue.
I then switched to the Telsa ROM mentioned earlier in this thread (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip) found at androidfilehost.com/?fid=24052804347807214, again with Open GApps nano for 5.1 (build open_gapps-arm-5.1-nano-20180922.zip), and have been running it with no issues for two days. My wifi is connected, and stays connected (tested two different routers), Play Store and apps have been working fine, and no crashes so far.
I'm using TWRP 3.1 (twrp-3.1.0-0-v410.img).
Thanks for mentioning Tesla, @jason2678 !
So like all of you I was looking for a rom to install on this v410 7" tablet, and it looks like I should just give up or stick with 4.4.2 stock if I want to go through the rooting process.
Basically all the development roms end with the same problems, wifi dropping, hostspot not working, no ir blaster, volume problems, bluetooth errors, and several hundred posts about lolipop memory leaks crippling the tablet because of only 1gb mem.
So, I am asking all of you, is there any real reason to root it, besides going back to stock 4.4.2?
And lastly, is the stock 4.4.2 kdz image that is floating around a test version, and if so is there an actual official kdz image somewhere that isn't a test image?
Thanks...
CrDroid by far in my opinion. Lineage based, 7.1.2.
Also, e/ os has been unofficially released. No Google anything...an entirely new Google list operating system by lineage. It's lightning fast and runs magisk perfectly. It's basically like nothing you've ever seen before and if you look under LG g pad 7.0 on Android file host, go to the second page and click on the last user who goes by the name anonymous and you'll find the ROM there. I had no idea what it was until my g pad boot it up and I saw the e logo. I pretty much **** myself in excitement

Categories

Resources