I have been looking for a solution to this problem for weeks and have found nothing that will fix it.
I am currently on CM11-M3, and have had the problem since 10.2. No matter what ringtone I select it will not play during an incoming call.
I have been testing with wheresmycellphone.com. Ehen a call comes in the phone will vibrate once and very rarely the ringtone will play for a fraction of a second, but most of the time there is no sound. I have noticed that the mute icon (speaker with a line through it) flashes in the notification area briefly the second the phone starts ringing.
Does it be behave the same way on other custom and stock ROMs?
Are you clean flashing?
audit13 said:
Does it be behave the same way on other custom and stock ROMs?
Are you clean flashing?
Click to expand...
Click to collapse
I dirty flashed 10.2 from 10.1, I did a clean install when I switched to CM11, every flash since has been with a cache/dalvik wipe. I have not yet tried a rom beyond CM.
You should try another ROM, even if it is based on CM11 to see what happens.
audit13 said:
You should try another ROM, even if it is based on CM11 to see what happens.
Click to expand...
Click to collapse
I will when I get a moment. I need to be accessible for work right now so I can't risk any excessive off time just yet.
zero|fade said:
I will when I get a moment. I need to be accessible for work right now so I can't risk any excessive off time just yet.
Click to expand...
Click to collapse
Well, I finally got off my ass to try fixing this again. I was going to try installing SlimKat, and as prep I wiped cache, dalvik and then factory reset. I rebooted to try receiving a call before I started work on flashing the rom and the phone now rings fine. I have no idea what changed, I had tried a factory reset on M2 and it didn't fix the issue. This is the first factory reset I applied to M3 though.
Related
Hi, I have the Wildfire S with Cyanogen 7.2 (the release from july this year) and I had no problems so far, but since yesterday it started behaving strange.
Each time I make or receive a call after a few seconds the screen goes blank and and I get two vibrates. Then each time I move the phone the screen comes to life and two more vibrates. THis will continue through-out the call
It is very annoying... and I have no idea how to fix it...
I didn't make any changes or updates or whatever it just started happening...
Try wiping the rom once.....it might help.....But remember to backup
csoulr666 said:
Try wiping the rom once.....it might help.....But remember to backup
Click to expand...
Click to collapse
What do you mean by wiping? the dalvik cache? will every thing still be there, except the cache of course, cause I've only wiped before installing roms and am not sure what really happens...
EDIT: A Factory reset fixed it, sooo it's not broken... but it would be great if I can fix it without flashing and installing everything all over again...
Any suggestions?
I was running latest paranoid android and I wiped cache/dalvic cache after flashing Cerberus in recovery and when the phone booted up it was asking me to Activate (sprint service) my phone. I've never seen this with flashing roms and was wondering if this is a known issue with flashing roms on the S3 or something that can randomly occur from time to time.
Anyone have experience with this before? I had been running Paranoid Android for less than 24 hours but initially didn't have any problems whatsoever.
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
youdoofus said:
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
Click to expand...
Click to collapse
This didn't have anything to do with my Google account. I guess I should have been more specific, I mean that my phone is deactivated on Sprint's network as in I can't make phone calls and all the info is missing in about phone. Phone number, PRL and such. I am flashing back to stock right now and hope this fixes it. Will probably give paranoid another go but this doesn't sound like a common issue because I haven't been able to find anything by searching.
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Ahhh... could try manually flashing your modem after the install too
sent from my thumbs
billard412 said:
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Click to expand...
Click to collapse
Soon as I flashed the stock rom it tried to activate and initially failed and prompted me to reboot. Second attempt it was successful and then I immediately flashed back to PA and it is working. Going to give it another shot and keep the stock rom on my sd card this time in case I get stuck in a pinch.
I jumped the gun, phone activated fine but signal drops in and out randomly and will not connect to 3g. Just reflashed to stock again and everything seemed fine but signal was still back in and out. Checked under status and PRL read "0" tried updating to no avail so did the dialer code and it did the activation and all is right in the world again, or at least for the moment.
Just trying to figure out why when I flash Paranoid all my settings just disappear
*edit*
Just flashed back to PA this third time after fully making sure that the phone was working and had 3G data and all was right with the world (my phone). Will update if it goes South again but as of right now the phone is behaving properly. Maybe it just wasn't working right the first time and I didn't notice since I was on wifi. Only thing that keeps me from thinking that is I didn't get the Activation message until 12 hours or so after I had flashed and had been using the phone. /shrug
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
youdoofus said:
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
Click to expand...
Click to collapse
how do you flash a modem? I am new to this and this is also a problem that I am having with the same rom. I tried searching for a fix and this is where i landed.
Thank you,
and sorry if i am breaking forum rules
I reverted to stock from liquidsmooth to flash a new rom, now when I try to make calls phone I can't hear anything or be heard. Even on speaker phone. Phone also freezes during calls. Any help?
Michaelk706 said:
I reverted to stock from liquidsmooth to flash a new rom, now when I try to make calls phone I can't hear anything or be heard. Even on speaker phone. Phone also freezes during calls. Any help?
Click to expand...
Click to collapse
Try rebooting into the stock recovery and doing a factory reset/cache wipe.
DinoSoup said:
Try rebooting into the stock recovery and doing a factory reset/cache wipe.
Click to expand...
Click to collapse
I tried that multiple times. I've wiped and changed different Roms still the phone freezes a and has not audio sending or receiving.
Unroot and send it back to Samsung. Hardware issue?
Can't, cracked the screen while out in the field. I'm getting ready to deploy and like to havleave a working phone with my wife.
Calls worked until I installed cm10.1 nightly. Now I can't be heard unless i turn on speaker phone. Sound is still crap but at least I can make a call.
I have tried a few nightly's and now I'm on the people's rom 3.14. (Loving tpr by the way). I doubt it is a hardware issue based on other reports and the fact it was fine until the custom roms.
I still use my phone as a phone from time to time and need it to work or I have to go back to stock.
Thanks
Could have been a bad flash / download
Did you check the md5sum?
leftcranium said:
Calls worked until I installed cm10.1 nightly. Now I can't be heard unless i turn on speaker phone. Sound is still crap but at least I can make a call.
I have tried a few nightly's and now I'm on the people's rom 3.14. (Loving tpr by the way). I doubt it is a hardware issue based on other reports and the fact it was fine until the custom roms.
I still use my phone as a phone from time to time and need it to work or I have to go back to stock.
Thanks
Click to expand...
Click to collapse
Let me make sure I'm understanding you correctly:
Your mic was working fine until you flashed the CM10.1 nightly. Afterwards, the other person could only hear you when you were on speakerphone.
You switched to TPR 3.14. This switch did not fix the mic problem.
You're thinking that switching back to stock (presumably unrooted) will fix this issue.
Please correct me if any of the above is incorrect.
If he issue isn't hardware-related, I'd bet it has to do with the kernel. Let me ask you the following:
Which CM10.1 nightly did you install? Did you see any other issues in the CM10.1 thread which might indicate problems with the nightly you flashed?
What kernel did you use while on CM10.1? I know that the newer kernels (3.4.y verses the old 3.0.y) have had issues and are just recently getting stable.
As CNexus asked,did you check the md5sum for the TPR Rom you flashed?
When you flashed TPR, did you do a full system wipe, or only a Factory Reset (data) wipe? I believe since you were coming from a 4.2.2 Rom (CM 10.1) to a 4.1.2 Rom (TPR), you should do a full system wipe. Some remnants of the CM10.1 kernel/system files could still be there, messing up the mic.
I would think re-flashing TPR (after checking the md5sum) with a full system wipe would fix your issue, but answering these questions would help us diagnose the problem better.
topherk said:
Let me make sure I'm understanding you correctly:
Your mic was working fine until you flashed the CM10.1 nightly. Afterwards, the other person could only hear you when you were on speakerphone.
You switched to TPR 3.14. This switch did not fix the mic problem.
You're thinking that switching back to stock (presumably unrooted) will fix this issue.
Please correct me if any of the above is incorrect.
If he issue isn't hardware-related, I'd bet it has to do with the kernel. Let me ask you the following:
Which CM10.1 nightly did you install? Did you see any other issues in the CM10.1 thread which might indicate problems with the nightly you flashed?
What kernel did you use while on CM10.1? I know that the newer kernels (3.4.y verses the old 3.0.y) have had issues and are just recently getting stable.
As CNexus asked,did you check the md5sum for the TPR Rom you flashed?
When you flashed TPR, did you do a full system wipe, or only a Factory Reset (data) wipe? I believe since you were coming from a 4.2.2 Rom (CM 10.1) to a 4.1.2 Rom (TPR), you should do a full system wipe. Some remnants of the CM10.1 kernel/system files could still be there, messing up the mic.
I would think re-flashing TPR (after checking the md5sum) with a full system wipe would fix your issue, but answering these questions would help us diagnose the problem better.
Click to expand...
Click to collapse
I think you have the symptoms correct.
I did a data wipe but not a factory reset before each rom install.
I started with this rom
cm-10.1-20130303-NIGHTLY-d2spr.zip
I tried 3/13, 3/24 and 3/27 before trying TPR3.14.
leftcranium said:
I think you have the symptoms correct.
I did a data wipe but not a factory reset before each rom install.
I started with this rom
cm-10.1-20130303-NIGHTLY-d2spr.zip
I tried 3/13, 3/24 and 3/27 before trying TPR3.14.
Click to expand...
Click to collapse
Yeah, a full system wipe might be the ticket. Let us know if that works.
I'm Back Baby
I tried a system wipe and a rooted stock rom. This didn't work. I then tried the LJ7_Stock_with_count_reset16 rom and my sound was ok. I cleaned out the mic hole with a pin and bam sound was like normal. I'm now back on TPRGS3.14 and everything is good. I think I had 2 issues but possibly only 1. messed up mic from multiple flashes and crap in the mic hole. I guess checking for a physical problem even as small as a mic debris is an easy first step.
thanks for the suggestions
Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?
JonnyZaggi said:
Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?
Click to expand...
Click to collapse
Since yesterday I am facing the same problems you are describing. At first I thought it was a bad flash or something like that. Clean installed various 4.3 costum roms and it's always the same.
Right now I will look deeper into it since the phone is unusable in that condition.
If I find a solution I will comment.
Best regards
Edit: Okay, works again flawlessly. I simply flashed an nightly from carbon-rom and the lags were gone. Hope it helps. What exactly caused the lag I don't know. For now I am staying on 4.2.2 Carbon as it is my favourite rom anyway and I will wait till there are stable 4.3 from carbon.
Are you sure it's the phone and not an app?
chrisinsocalif said:
Are you sure it's the phone and not an app?
Click to expand...
Click to collapse
Not pretty sure, but it still occured after countless factory resets, wipe cache, wipe dalvic cache and wipe system via TWRP.
Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4
chrisinsocalif said:
Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes I did. I only flashed for example newest PA and their PA Gapps.
So far I resolved it by "downgrading" to a 4.2.2 nightly from carbon. The lags are completly gone. I will stay and wait till carbon has stable 4.3.
why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct
Zepius said:
why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct
Click to expand...
Click to collapse
Already did that.
I am having the same/similar problems with my GNex too. Specifically bullets [1-3] from the original post. I am running unmodified yakjuux and have tried with just my google account with no other apps and the same problem exists.
Mine makes a noticeable "click" sound with a vibration followed by a reboot.
It usually happens during calls and after it boots the phone call log shows no record of the incoming/outgoing call that just happened. Its like a blue screen of death for android!
I have sent the phone back to Samsung's warranty service 4 separate times and each time they reported no trouble found in the completion report. They just factory reset or put an older version of jelly bean back on the phone and send it back to me with some notes of PRL updates and other nonsense to make it seem like they did something to fix it.
Does anyone have any suggestions (logs, adb, etc) how I can help prove to Samsung/service absolute that the phone is a lemon (other than trying to video tape the phone hoping it reboots - because that is the last resort)?
I already escalated to executive customer service and they refused an exchange because the completion reports show no trouble found :crying:
Thx!
well... I also have this problem.
First happened when I flash Cm10.2 nightly (don't remember which one).
Then I flash PA, or whatever... Looks like the random reboot relating to notifications? It's usually happened when whatsapp notification coming in, but not always.
But a few weeks ago I flashed stock ROM rooted (via TWRP, not fastboot).
The problems solved. No random reboots anymore. Then today I tried latest CM10.2, and it happened again... Wonder why... Looks like it's a very rare problems.
Interesting to see someone having the same problem...
Now I want to flash stock ROM via fastboot to check if it'll fix.
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?
lonestrider said:
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?
Click to expand...
Click to collapse
I believe CM offers an upgrade option somewhere in the system settings. Unless you want to wipe your phone and flash directly to 10.2 in which case I do not think you need to flash stock 4.3 first. Maybe just do a reset within 10.1 before you flash CM10.2 via whatever recovery (clockwork etc) you are using but even that may be unnecessary.
My 1 year warranty expires this month so if I can't manage to get something out of Samsung I am going to play around with flashing stock 4.3 as you suggested. I have tried converting yakjuux to yakju in the past but still saw the problem then which made me revert back to yakjuux so I could send the phone back for service).