Develop Bugs

how to flash pd98img.zip through adb

Anybody know if its poissible to flash the Stock pd98img.zip by using adb shell, i want to return to stock but my volume up key isnt working so is there any way that i can use the adb instead of my volume up key

adilrenzu said:
Anybody know if its poissible to flash the Stock pd98img.zip by using adb shell, i want to return to stock but my volume up key isnt working so is there any way that i can use the adb instead of my volume up key
Click to expand...
Click to collapse
plug the phone in fastboot, you should see fastboot usb in red.
Open a cmd as admin or terminal as root in the pc
type: fastboot oem rebootRUU (you will get a black splash with silver htc)
fastboot flash zip "nameoffile.zip" (no quation marks)
Once it is done (it says OKAY. finished in the CMD session)
fastboot reboot
Make sure that u are in the same folder (in CMD) where the zip file is...This will only be feasible for a RUU...not a rom. It also works for radios and CWM recovery....:good:

glevitan said:
plug the phone in fastboot, you should see fastboot usb in red.
Open a cmd as admin or terminal as root in the pc
type: fastboot oem rebootRUU (you will get a black splash with silver htc)
fastboot flash zip "nameoffile.zip" (no quation marks)
Once it is done (it says OKAY. finished in the CMD session)
fastboot reboot
Make sure that u are in the same folder (in CMD) where the zip file is...This will only be feasible for a RUU...not a rom. It also works for radios and CWM recovery....:good:
Click to expand...
Click to collapse
Hey there, im in this part of the process. Right now is in writing "ZIP"... since around 1 hour. it is normal? how long it will take?
Thank you

fefetron said:
Hey there, im in this part of the process. Right now is in writing "ZIP"... since around 1 hour. it is normal? how long it will take?
Thank you
Click to expand...
Click to collapse
It shouldn´t take that long. Make sure that you are using the oem cable. That USB ports are working fine and there´s no other stuff connected to your USB ports.

glevitan said:
It shouldn´t take that long. Make sure that you are using the oem cable. That USB ports are working fine and there´s no other stuff connected to your USB ports.
Click to expand...
Click to collapse
I only have the mouse in the usb port. im using the HTC cable. i have a htc inspire 4g

fefetron said:
I only have the mouse in the usb port. im using the HTC cable. i have a htc inspire 4g
Click to expand...
Click to collapse
ok, do the following. Eject the sdcard and try again without the sdcard. Report back please. :good:

glevitan said:
ok, do the following. Eject the sdcard and try again without the sdcard. Report back please. :good:
Click to expand...
Click to collapse
Just Waiting for the device.. nothing more
im traying to install new drivers.
i´ll back

glevitan said:
plug the phone in fastboot, you should see fastboot usb in red.
Open a cmd as admin or terminal as root in the pc
type: fastboot oem rebootRUU (you will get a black splash with silver htc)
fastboot flash zip "nameoffile.zip" (no quation marks)
Once it is done (it says OKAY. finished in the CMD session)
fastboot reboot
Make sure that u are in the same folder (in CMD) where the zip file is...This will only be feasible for a RUU...not a rom. It also works for radios and CWM recovery....:good:
Click to expand...
Click to collapse
Many thanks!
I too had this boot problem on a bad flash through the Hack Kit
(my fault by the way). From power on it took 20 mins to get to the first white HTC screen . Then a further 10 mins to start normal boot.
Apart from the LONG boot, everything worked perfectly. Using TermEm I could boot into bootloader and recovery. The rom, IceColdSandwich worked perfectly in every respect but the corrupted boot was doing my head in.
Using your tutorial, I managed to flash the correct bootloader and now all is good.
hboot before was 0.85.2007
hboot after is 0.85.0024
Sorry if this is a long post but I think it is worth it. Here is a log of the fastboot process:
F:\Android\DHD\Bootloader Image\Fastboot>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
HT11BRX11244 device
F:\Android\DHD\Bootloader Image\Fastboot>fastboot oem rebootRUU
... OKAY [ 0.375s]
finished. total time: 0.376s
F:\Android\DHD\Bootloader Image\Fastboot>fastboot flash zip PD98IMG.zip
< waiting for device >
sending 'zip' (227 KB)... OKAY [ 0.056s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOstart image[hboot] unzipping & flushing...
INFO[RUU]UZ,hboot,0
INFO[RUU]UZ,hboot,100
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,100
OKAY [6586.776s]
finished. total time: 6586.834s
F:\Android\DHD\Bootloader Image\Fastboot>fastboot reboot
rebooting...
finished. total time: 8.532s
F:\Android\DHD\Bootloader Image\Fastboot>
I have to say that the timings, because of the LONG boot, are completely wrong, . I was tempted to pull the plug on a number of occasions but I gave myself a talking to and went for a coffee.
The whole process took about 2 hours and I am now the delighted owner of a normal booting DHD.
To anyone who wants to attempt this procedure, the watchword is patience. Whenever you think nothing is happening, DO NOTHING!
The different stages will eventually happen just as laid out as per Glevitan. Good luck with your attempt.
Once again, many thanks.
Edit: Just an afterthought, at one stage Windows had a failed attempt at installing usb drivers that ended up as an 'Unknown Device'. Just ignore it and keep going.

Edit: I just tried again and it worked, nevermind!
Just fyi: if you get an error after flashing the ZIP, just flash it again.

Thanks! This was helpful.
glevitan said:
plug the phone in fastboot, you should see fastboot usb in red.
Open a cmd as admin or terminal as root in the pc
type: fastboot oem rebootRUU (you will get a black splash with silver htc)
fastboot flash zip "nameoffile.zip" (no quation marks)
Once it is done (it says OKAY. finished in the CMD session)
fastboot reboot
Make sure that u are in the same folder (in CMD) where the zip file is...This will only be feasible for a RUU...not a rom. It also works for radios and CWM recovery....:good:
Click to expand...
Click to collapse

Cant flash recovery! Phone reboots when entering recovery!

Please somebody help!
I flashed TWRP and CWM HTC International version. But the phone restarts when entering recovery. The phone is acting a little weird! When I press reboot bootloader in HBOOT the phone shudowns.
And also in CMW the phone gives IO error invluding cant cess any recovery logs and etc
Please what other way I can flash recovery? URGENT HELP PLEASE!

ziaulh.ch said:
Please somebody help!
I flashed TWRP and CWM HTC International version. But the phone restarts when entering recovery. The phone is acting a little weird! When I press reboot bootloader in HBOOT the phone shudowns.
And also in CMW the phone gives IO error invluding cant cess any recovery logs and etc
Please what other way I can flash recovery? URGENT HELP PLEASE!
Click to expand...
Click to collapse
This is the error: FAILED <remote: err = 0x30000>

Do you also have the quadcore hox ?
Flash this one
http://db.tt/t6RTcTwK
Rename to recovery.img
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache

Mr Hofs said:
Do you also have the quadcore hox ?
Flash this one
http://db.tt/t6RTcTwK
Rename to recovery.img
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Click to expand...
Click to collapse
Its giving the same error bro!

What's your main version ?
Fastboot getvar version-main

Mr Hofs said:
What's your main version ?
Fastboot getvar version-main
Click to expand...
Click to collapse
main version means?

The number that comes out of the given fastboot command.....
Edit
So....whats the number ???

Please tell us more details
Have you unlocked bootloader?
Which HBOOT version etc.?

Mr Hofs said:
The number that comes out of the given fastboot command.....
Edit
So....whats the number ???
Click to expand...
Click to collapse
Bro im using htc all in one tool kit. How can i get the numbers?
3498BoyZ said:
Please tell us more details
Have you unlocked bootloader?
Which HBOOT version etc.?
Click to expand...
Click to collapse
1.36. And yes i have unlocked bootloader with unlockkey but at a point i saw a security something where the unlocked is written.

Open a command window inside the folder on the pc where also the fastboot.exe file is located. Type the command there

Mr Hofs said:
Open a command window inside the folder on the pc where also the fastboot.exe file is located. Type the command there
Click to expand...
Click to collapse
What is the command. I am on cmd window inside data of all in one tool kit. Sorry for being to nood!

Mr Hofs said:
Fastboot getvar version-main
Click to expand...
Click to collapse

Mr Hofs said:
Click to expand...
Click to collapse
Thanks!
Its 3.14.707.24

Oke try this :
Download this ruu
http://bugsylawson.com/files/file/1...24-radio-5120416229-release-296434-signedexe/
Then put the phone in the bootloader and relock it :
Fastboot oem lock
Keep the phone in the locked bootloader (you also see a warning sign/text)
Now right click the ruu.exe on the pc and select "run as administrator"
It should flash the phone back to stock completely (kernel,rom and recovery)

Mr Hofs said:
Oke try this :
Download this ruu
http://bugsylawson.com/files/file/1...24-radio-5120416229-release-296434-signedexe/
Then put the phone in the bootloader and relock it :
Fastboot oem lock
Keep the phone in the locked bootloader (you also see a warning sign/text)
Now right click the ruu.exe on the pc and select "run as administrator"
It should flash the phone back to stock completely (kernel,rom and recovery)
Click to expand...
Click to collapse
The download will take a while! I will reply back after I do this. Thanks millions for the help bro! I will get back ASAP!
**** man! This is what I got when I went to OEM lock!
(bootloader) write sector fail !
(bootloader) [SEC] security_set_unlock(1709):
(bootloader) failed to update security data
(bootloader) Lock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.280s
I entered into TWRP somehow(most of the times it hangs) and it cant mount any partition. Caant wipe anything!

Read my post !!! You don't need to wipe anything ! Relock the bootloader (check that it says relocked) and run the RUU !!!
You have no business in the recovery at this point !
QUESTION 1:
What does the top of the bootloader say, does it say ENDEVOURU ?
QUESTION 2:
Did you flash anything to the phone from another forum ?

Mr Hofs said:
Read my post !!! You don't need to wipe anything ! Relock the bootloader (check that it says relocked) and run the RUU !!!
You have no business in the recovery at this point !
QUESTION 1:
What does the top of the bootloader say, does it say ENDEVOURU ?
QUESTION 2:
Did you flash anything to the phone from another forum ?
Click to expand...
Click to collapse
After I got error while locking OEM I tried to get into TWRP.
1. Yup Endevouru
2. Nop. I flashed recovery with All in one toolkit. And then Ordroid and Viper x.

Entering twrp with a locked bootloader is of no use. Did you run the ruu ?

Mr Hofs said:
Read my post !!! You don't need to wipe anything ! Relock the bootloader (check that it says relocked) and run the RUU !!!
You have no business in the recovery at this point !
QUESTION 1:
What does the top of the bootloader say, does it say ENDEVOURU ?
QUESTION 2:
Did you flash anything to the phone from another forum ?
Click to expand...
Click to collapse
Ok now I have successfully locked and exe uted the RU. Then the phone Booted but every single process is getting FC!

Okey, your phone should be 100% stock ! Boot into the bootloader and perform a factory reset, reboot after that and check again. If its still FCing its a fault that we can't solve with software.

[Q] update hboot

Hello people!
Im jctjepkema, pretty new on this site, but i always scrolled through the pages, for the news and stuff. Now since yesterday i bought the HTC Desire HD from my father because i need a second phone for my private stuf. Now i want to root it because it is fun^^. I have done some galaxy's and was always easy job for me. However i can't get the HTC to unlock it's bootloader. I think i have the htc europe rom, however mine is a little newer, I have the 3.12.405.2 so I can't use the RUU from htcdev to update my hboot from 2.00.0027 to 2.00.0029, becuase for the htcdev bootloader unlocker i need hboot 2.00.0029 right? my android version is 2.3.5 and sense is 3.0. Does anybody know how i can upgrade my hboot so i can unlock this bootloader?
I hope you can help me! and thanks in advance!!!!
Greetings Jctjepkema

Make a goldcard and you should be able to use any ruu from htcdev.
Sent from my GT-I9505 using xda app-developers app

ranger4740 said:
Make a goldcard and you should be able to use any ruu from htcdev.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
ooh gold! will google what it is! when i'm done will post the results thanks!
Oh oke, so i found a page, when i install there the original htc europe desire hd rom and then install ruu i can unlock the bootloader, root it and install ligux am i right?
UPDATE: oke now i have a gold card, but where do i find a rom i can install using this card? so i can unlock the bootloader using htcdev site?

The hboot updates are ruu in htcdev.
For full official roms goto
http://www.shipped-roms.com/index.php?category=android&model=Ace
Sent from my GT-I9505 using xda app-developers app

I need to update the hboot, so now with the goldcard i can just install a ruu from the htcdev site? does it matter witch one i choose?
thanks in advance!

download this file
http://www.htcmania.com/g.php?url=h...achment.php?attachmentid=1792087&d=1362853540
put it wherever you have adb.exe and fastboot.exe
plug your phone with usb debug activated
open cmd and write
adb reboot oem-78 (the device will reboot on black scrren with grey HTC letters)
fastboot flash zip rom.zip (your hboot will be updated to 2.00.29)
fastboot reboot

pascuals said:
download this file
http://www.htcmania.com/g.php?url=h...achment.php?attachmentid=1792087&d=1362853540
put it wherever you have adb.exe and fastboot.exe
plug your phone with usb debug activated
open cmd and write
adb reboot oem-78 (the device will reboot on black scrren with grey HTC letters)
fastboot flash zip rom.zip (your hboot will be updated to 2.00.29)
fastboot reboot
Click to expand...
Click to collapse
If I do this, will i end up with a locked bootloader?

no,just updated (be sure your hboot is now 2.00.27, do not use if it´s 0.85)
then you have to unlock using htc-dev
P: D : if your hboot is 0.85 use this https://dl.dropboxusercontent.com/u/55810636/rom.zip

hdc-dev rru can only unlock the bootloader if I have a stock kernel, right?

update de hboot
register in htcdev.com
reboot in fastboot and type
fastboot oem get_identifier_token
submit the token to htcdev and wait to receive the mail with the unlock code
put it in the same place as before
then type
fastboot flashh unlocktoken unlock_code.bin
press yes in the device and go on
thats all, you are unlocked
Now you have to change the recovery and flash superuser or another Rom

pascuals said:
update de hboot
register in htcdev.com
reboot in fastboot and type
fastboot oem get_identifier_token
submit the token to htcdev and wait to receive the mail with the unlock code
put it in the same place as before
then type
fastboot flashh unlocktoken unlock_code.bin
press yes in the device and go on
thats all, you are unlocked
Now you have to change the recovery and flash superuser or another Rom
Click to expand...
Click to collapse
thanks allot! i will try!

jctjepkema said:
thanks allot! i will try!
Click to expand...
Click to collapse
I found out i come to one problem, when the device is in the grey htc letters, windows does not recognise it. it says there is a device but it says it doesn't recognise it and it has the wrong drivers?. Can you help me with that?
edit: maybe important is that im running windows 8
oke i tried it on a windows 7 pc and it is done! it worked! thanks you guys allot !! you're all great!

thanks dude!!
pascuals said:
download this file
http://www.htcmania.com/g.php?url=h...achment.php?attachmentid=1792087&d=1362853540
put it wherever you have adb.exe and fastboot.exe
plug your phone with usb debug activated
open cmd and write
adb reboot oem-78 (the device will reboot on black scrren with grey HTC letters)
fastboot flash zip rom.zip (your hboot will be updated to 2.00.29)
fastboot reboot
Click to expand...
Click to collapse
thanks dude.
You method worked perfectly. I was stuck and didnt want to brick my phone. Thanks a million!!!!
Now am off to unlock my phone!!

pascuals said:
download this file
http://www.htcmania.com/g.php?url=h...achment.php?attachmentid=1792087&d=1362853540
put it wherever you have adb.exe and fastboot.exe
plug your phone with usb debug activated
open cmd and write
adb reboot oem-78 (the device will reboot on black scrren with grey HTC letters)
fastboot flash zip rom.zip (your hboot will be updated to 2.00.29)
fastboot reboot
Click to expand...
Click to collapse
thank you for this guidance, i have performed these steps, this is the result:
sending 'zip' (221 KB)...
OKAY [ 0.060s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping & flushing...
(bootloader) [RUU]UZ,hboot,0
(bootloader) [RUU]UZ,hboot,100
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,100
OKAY [ 9.980s]
finished. total time: 10.040s
i have tried to update from hboot 0.85.2425 to 2.00.29 (took the file from your link: https://dl.dropboxusercontent.com/u/55810636/rom.zip)
but the bootloader screen still says version 0.85.2425
can you help me?

rename downloaded ROM into PD98IMG and start from HBOOT. i will auto detect the file and Volume Up to install

tried this too, but didnt work. have installed newest RUU which also updated hboot, but thanks

"fastboot flash zip rom.zip" dose not work!
pascuals said:
update de hboot
register in htcdev.com
reboot in fastboot and type
fastboot oem get_identifier_token
submit the token to htcdev and wait to receive the mail with the unlock code
put it in the same place as before
then type
fastboot flashh unlocktoken unlock_code.bin
press yes in the device and go on
thats all, you are unlocked
Now you have to change the recovery and flash superuser or another Rom
Click to expand...
Click to collapse
pascuals said:
download this file
http://www.htcmania.com/g.php?url=h...achment.php?attachmentid=1792087&d=1362853540
put it wherever you have adb.exe and fastboot.exe
plug your phone with usb debug activated
open cmd and write
adb reboot oem-78 (the device will reboot on black scrren with grey HTC letters)
fastboot flash zip rom.zip (your hboot will be updated to 2.00.29)
fastboot reboot
Click to expand...
Click to collapse
i do the process "fastboot flash zip rom.zip" , but the cell phone was not responsed, just keep on showing the blcak screen.

Hello, i have Baseband version 26.14.04.28_M is there any better radio to flash ? And if yes is it better in gsm,3g,wifi ? Worth it to flash ?
Thanks !

S-off, Relocked and no Root (SOLVED)

Hi guys,
I flashed stock back to my phone and relocked the bootloader by "fastboot oem lock".
I been stuck with this for the last 2 days searching for solution on how to get my phone unlocked and rooted again.
This is what I have tried so far:
1. Rumrunner 1.10.605.10 and 1.10.605.15 firmware (flashed 1.10.605.10 and updated to 15) - Run just fine, but it does not change anything on the phone. Still shows RELOCKED S-off and NO Root.
2. Firewater (temp-root method) - Temproot: Root acquired. Firewater: "there really isn't a helluva lot to do here. bye bye"
3. Flashing CM recovery - failed remote not allowed
Could someone please help me to get back Root access and UNLOCK my phone?
Thank you in advance.

If your s-off, all you have to do is fastboot flash a custom recovery.
Code:
fastboot flash recovery name_of_recovery_file.img
Then flash superuser zip thru recovery. Then you will be rooted. Also it is a myth that you need to relock the bootloader to do an ruu, so that wasnt really needed. Not sure exactly how to unlock the bootloader again.

cmlusco said:
If your s-off, all you have to do is fastboot flash a custom recovery.
Code:
fastboot flash recovery name_of_recovery_file.img
Then flash superuser zip thru recovery. Then you will be rooted. Also it is a myth that you need to relock the bootloader to do an ruu, so that wasnt really needed. Not sure exactly how to unlock the bootloader again.
Click to expand...
Click to collapse
Thank you for your reply.
I have tried to flash recovery several times, and both TWRP and CWM gives the same error: FAILED remote not allowed
Code:
sending 'recovery' (8784 KB)...
OKAY [ 1.097s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.134s
I tried the following recoveries:
openrecovery-twrp-2.6.3.3-m7vzw
recovery-clockwork-6.0.4.4-m7vzw
recovery-clockwork-6.0.4.7-m7vzw
recovery-clockwork-touch-6.0.4.5-m7vzw
recovery-clockwork-touch-6.0.4.7-m7vzw

NELORAO said:
Thank you for your reply.
I have tried to flash recovery several times, and both TWRP and CWM gives the same error: FAILED remote not allowed
Code:
sending 'recovery' (8784 KB)...
OKAY [ 1.097s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.134s
I tried the following recoveries:
openrecovery-twrp-2.6.3.3-m7vzw
recovery-clockwork-6.0.4.4-m7vzw
recovery-clockwork-6.0.4.7-m7vzw
recovery-clockwork-touch-6.0.4.5-m7vzw
recovery-clockwork-touch-6.0.4.7-m7vzw
Click to expand...
Click to collapse
Ok try this then.
1. Download this file http://vzw1files.dyndns.org/RECOVERIES/twrp/Twrp_2.6.3.4_RUU_Mode.zip, and place it on your pc in the same folder as fastboot.exe and adb.exe. Rename it to recovery.zip
2. Connect the phone to the pc and open a cmd prompt to where the files are, and type the following.
Code:
adb reboot bootloader
Wait for hboot.
Code:
fastboot oem rebootRUU
Wait for grey HTC logo.
Code:
fastboot flash zip recovery.zip
Wait for cmd window to say it has finished.
Code:
fastboot reboot-bootloader
3. Hit power button to select bootloader, and then use the power button again to select recovery.
If all is well you should boot to TWRP 2.6.3.4. Then flash Superuser http://vzw1files.dyndns.org/Superuser/superuser.zip and you will be rooted.
.

NELORAO said:
Hi guys,
I flashed stock back to my phone and relocked the bootloader by "fastboot oem lock".
I been stuck with this for the last 2 days searching for solution on how to get my phone unlocked and rooted again.
This is what I have tried so far:
1. Rumrunner 1.10.605.10 and 1.10.605.15 firmware (flashed 1.10.605.10 and updated to 15) - Run just fine, but it does not change anything on the phone. Still shows RELOCKED S-off and NO Root.
2. Firewater (temp-root method) - Temproot: Root acquired. Firewater: "there really isn't a helluva lot to do here. bye bye"
3. Flashing CM recovery - failed remote not allowed
Could someone please help me to get back Root access and UNLOCK my phone?
Thank you in advance.
Click to expand...
Click to collapse
Enable USB Debugging in Settings.
To do so, go to build information and tap it 7 times.
This will enable the Developer options in settings.
In there, check the box for Usb Debugging.
You should then be able to fastboot flash the recovery as per usual.
Good luck! :good:

cmlusco said:
Ok try this then.
1. Download this file http://vzw1files.dyndns.org/RECOVERIES/twrp/Twrp_2.6.3.4_RUU_Mode.zip, and place it on your pc in the same folder as fastboot.exe and adb.exe. Rename it to recovery.zip
2. Connect the phone to the pc and open a cmd prompt to where the files are, and type the following.
Code:
adb reboot bootloader
Wait for hboot.
Code:
fastboot oem rebootRUU
Wait for grey HTC logo.
Code:
fastboot flash zip recovery.zip
Wait for cmd window to say it has finished.
Code:
fastboot reboot-bootloader
3. Hit power button to select bootloader, and then use the power button again to select recovery.
If all is well you should boot to TWRP 2.6.3.4. Then flash Superuser http://vzw1files.dyndns.org/Superuser/superuser.zip and you will be rooted.
.
Click to expand...
Click to collapse
Dude, there just aren't enough words to say thank you.
Again, thank you so much, everything works like a charm now.
santod040 said:
Enable USB Debugging in Settings.
To do so, go to build information and tap it 7 times.
This will enable the Developer options in settings.
In there, check the box for Usb Debugging.
You should then be able to fastboot flash the recovery as per usual.
Good luck! :good:
Click to expand...
Click to collapse
Thank you, I was finally able to flash your KitKat Rom that I have been dreaming for the last 3 days. :laugh:
Again, thank you so much.

cmlusco said:
Ok try this then.
1. Download this file, and place it on your pc in the same folder as fastboot.exe and adb.exe. Rename it to recovery.zip
2. Connect the phone to the pc and open a cmd prompt to where the files are, and type the following.
Code:
adb reboot bootloader
Wait for hboot.
Code:
fastboot oem rebootRUU
Wait for grey HTC logo.
Code:
fastboot flash zip recovery.zip
Wait for cmd window to say it has finished.
Code:
fastboot reboot-bootloader
3. Hit power button to select bootloader, and then use the power button again to select recovery.
If all is well you should boot to TWRP 2.6.3.4. Then flash Superuser and you will be rooted.
.
Click to expand...
Click to collapse
Holy crap dude. I thought my phone was bricked. Thank you so much for that!

[Q] Can not flah Stock ROM

Hi,
I can not successfully run RUU ROM. I though, that ruu can fix almost everything, but everytime I got error message 140. Before 3 month I download stock rom and successfully used it, but now the same rom doesnt work (from this site: http://shipped-roms.com/index.php?category=android&model=Ace ).
Bootloader is relocked.
Main problem is that after "standart" restart phone stuck on white screen with htc logo. If I restart to bootloader, via fastboot push boot.img to phone, than phone works almost wel.. ...until next restart.. :/
I know only one way how to fix - via stock rom. Or does exist any next solution?
I try to use this stock rom:
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
(before 3 month works perfect, now I got error 140...)
Here is my phone info:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH18KRX02893
INFOimei: xxxxxxxxxxxxxx
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__102
INFObattery-status: good
INFObattery-voltage: 4204mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.004s
Thanks all for tips

You mean fastboot falsh boot boot.img (don't do that on S-on device)
try:
Step 1)
after runing ruu.exe in windows temp folder you can find room.zip
copy it to another location (in folder where you have fastboot and adb)
close ruu.exe
Step2)
If you are in android
adb reboot oem-78
or If you are in hboot (fastboot)
fastboot oem rebootRUU
when your phone restart and get in ruu flash mode
fastboot flash zip room.zip

Gussta said:
You mean fastboot falsh boot boot.img (don't do that on S-on device)
try:
Step 1)
after runing ruu.exe in windows temp folder you can find room.zip
copy it to another location (in folder where you have fastboot and adb)
close ruu.exe
Step2)
If you are in android
adb reboot oem-78
or If you are in hboot (fastboot)
fastboot oem rebootRUU
when your phone restart and get in ruu flash mode
fastboot flash zip room.zip
Click to expand...
Click to collapse
If I am understand well:
1) conect phone to pc, run instalation ruu
2) during instalation process find in win/temp folder rom.zip
3) copy this file tinto folder with adb files
4) cancel instalation
5) in phone run bootloader than fastboot
6) run command prompt in folder with adb and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until instalation end
8) run phone, than go to fastboot and from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired
Is that right?
btw: if I want to turn on my phone, every time I have to flash boot.img via fastboot otherwise phone didnt start..

Pilsner12 said:
If I am understand well:
1) conect phone to pc, run instalation ruu
2) during instalation process find in win/temp folder rom.zip
3) copy this file tinto folder with adb files
4) cancel instalation
5) in phone run bootloader than fastboot
6) run command prompt in folder with adb and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until instalation end
8) run phone, than go to fastboot and from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired
Is that right?
btw: if I want to turn on my phone, every time I have to flash boot.img via fastboot otherwise phone didnt start..
Click to expand...
Click to collapse
Almost
6) run command prompt in folder with adb, fastboot and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until phone goes in ruu install mode
8) than from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired

Gussta said:
Almost
6) run command prompt in folder with adb, fastboot and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until phone goes in ruu install mode
8) than from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired
Click to expand...
Click to collapse
I found rom.zip, ran "fastboot flash zip rom.zip" and now I am waiting more than 10 minutes (mabye more) and on phone is blask screen with white logo HTC and on command prompt isnt nothing new..
How long it takes, or what I should do?

Pilsner12 said:
I found rom.zip, ran "fastboot flash zip rom.zip" and now I am waiting more than 10 minutes (mabye more) and on phone is blask screen with white logo HTC and on command prompt isnt nothing new..
How long it takes, or what I should do?
Click to expand...
Click to collapse
I found other manual http://androidforums.com/desire-hd-all-things-root/716369-unroot-desire-hd-file-ruu-2.html but my phone stop working in same moment:
INFOzip header checking...
INFOzip info parsing...
after parsing nothing happens.. (more than hour)

Pilsner12 said:
I found rom.zip, ran "fastboot flash zip rom.zip" and now I am waiting more than 10 minutes (mabye more) and on phone is blask screen with white logo HTC and on command prompt isnt nothing new..
How long it takes, or what I should do?
Click to expand...
Click to collapse
Info pharsing musn't take to long. Maybe max min. or two.
Do you get any green stripe under HTC logo in black screen?
I didn't see that anytime.
In this step I think you can stop it with unplaging cable close cmd plug cable again and type fastboot reboot or try just close cmd open it again and type the same.
But never ever pull out battery. Rather unplug cable and wait that phone loose battery power. With pulling out battery you can burn eMMC disk.
After you reboot phone, you can try again.
---------- Post added at 09:26 PM ---------- Previous post was at 09:21 PM ----------
Pilsner12 said:
I found other manual http://androidforums.com/desire-hd-all-things-root/716369-unroot-desire-hd-file-ruu-2.html but my phone stop working in same moment:
INFOzip header checking...
INFOzip info parsing...
after parsing nothing happens.. (more than hour)
Click to expand...
Click to collapse
I didn't understand now.
You try several time with the same error or?

Gussta said:
Info pharsing musn't take to long. Maybe max min. or two.
Do you get any green stripe under HTC logo in black screen?
I didn't see that anytime.
In this step I think you can stop it with unplaging cable close cmd plug cable again and type fastboot reboot or try just close cmd open it again and type the same.
But never ever pull out battery. Rather unplug cable and wait that phone loose battery power. With pulling out battery you can burn eMMC disk.
After you reboot phone, you can try again.
---------- Post added at 09:26 PM ---------- Previous post was at 09:21 PM ----------
I didn't understand now.
You try several time with the same error or?
Click to expand...
Click to collapse
I didnt get any green stripe under HTC logo.
Yes, I try several times with same result - nothing happens..
I try for shure again stock rom and still not working. Error 155.
What actually mean "INFOzip info parsing"?
btw: how I can recognize, that eMMC disk is ok or corrupt?

Error 155 gets when either your bootloader is unlocked or u r using the wrong RUU
Factory reset your phone to remove any non-stock stuff from the ROM and try again.
If file fail with error don't get out from ruu, just start flasihng again.
Sometimes you have to flash twice in a row to get it.
After it's done type fastboot reboot-bootloader (takes you back to fastboot)
Do Factory reset again.
If you failed with flashing try with difrent rom.
INFOzip info parsing means that he is checking if room.zip is ok.
"btw: how I can recognize, that eMMC disk is ok or corrupt?"
If you change settings, contacts, alarm etc.. and when you shut down your phone, pull out your battery, wait one to two minutes, put it back in, power on phone and if you get everything back like it was before you maide changes it's probably bad eMMC. If everything get remembered you don't have problem with eMMC.
But error you get dosn't have anything with eMMC. With bad eMMC you can correctly flash ROM and after restarting your phone you can see that you haven't flash anything.
The reason is that phone first push everything to RAM and than on eMMC (because eMMC is slow).
When you push some data to phone and it get RAM you have it but because (and if not) eMMc can't save it, after restart you have nothing.

Gussta said:
Error 155 gets when either your bootloader is unlocked or u r using the wrong RUU
Factory reset your phone to remove any non-stock stuff from the ROM and try again.
If file fail with error don't get out from ruu, just start flasihng again.
Sometimes you have to flash twice in a row to get it.
After it's done type fastboot reboot-bootloader (takes you back to fastboot)
Do Factory reset again.
If you failed with flashing try with difrent rom.
INFOzip info parsing means that he is checking if room.zip is ok.
"btw: how I can recognize, that eMMC disk is ok or corrupt?"
If you change settings, contacts, alarm etc.. and when you shut down your phone, pull out your battery, wait one to two minutes, put it back in, power on phone and if you get everything back like it was before you maide changes it's probably bad eMMC. If everything get remembered you don't have problem with eMMC.
But error you get dosn't have anything with eMMC. With bad eMMC you can correctly flash ROM and after restarting your phone you can see that you haven't flash anything.
The reason is that phone first push everything to RAM and than on eMMC (because eMMC is slow).
When you push some data to phone and it get RAM you have it but because (and if not) eMMc can't save it, after restart you have nothing.
Click to expand...
Click to collapse
If I am understant well:
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot reboot-bootloader run factory reset again
In case, that I have in my phone corrupted stock rom and phone trying use it, how I can use another rom?
via command prompt "fastboot flash zip rom.zip"?
(prepared from stock installation process)

Pilsner12 said:
If I am understant well:
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot reboot-bootloader run factory reset again
In case, that I have in my phone corrupted stock rom and phone trying use it, how I can use another rom?
via command prompt "fastboot flash zip rom.zip"?
(prepared from stock installation process)
Click to expand...
Click to collapse
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot rebootRUU
5) type fastboot flash zip rom.zip (if you get error repeat this step one more time)
6) type fastboot reboot-bootloader
7) run factory reset
---------- Post added at 03:47 PM ---------- Previous post was at 03:42 PM ----------
Pilsner12 said:
In case, that I have in my phone corrupted stock rom and phone trying use it, how I can use another rom?
via command prompt "fastboot flash zip rom.zip"?
(prepared from stock installation process)
Click to expand...
Click to collapse
I didn't understand what did you want to say with this part?
If you wanted to say: what to do if you flash stock rom?
Just flash another one with fastboot flash zip rom.zip

Gussta said:
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot rebootRUU
5) type fastboot flash zip rom.zip (if you get error repeat this step one more time)
6) type fastboot reboot-bootloader
7) run factory reset
---------- Post added at 03:47 PM ---------- Previous post was at 03:42 PM ----------
I didn't understand what did you want to say with this part?
If you wanted to say: what to do if you flash stock rom?
Just flash another one with fastboot flash zip rom.zip
Click to expand...
Click to collapse
Yes, it is what I am wanted to say.. sorry for my english.
I try it exactly how is here described but it doesnt help.. (tryed other rom.zip)
I foud this manual: http://forum.xda-developers.com/showthread.php?t=2367322 but if I want to run aahk, command prompt reply:
Code:
File: "tools\bin\fre3vo" is missing or corrupt.
Download and extract again
Some virus scanners remove the necessary exploits for temproot.
Disable virus scan if that happens.
Pokračujte stisknutím libovolné klávesy...
I think only one way how this fix it is to gain S-OFF. Or does exist any other way?
..but I dont know how..

Pilsner12 said:
Yes, it is what I am wanted to say.. sorry for my english.
I try it exactly how is here described but it doesnt help.. (tryed other rom.zip)
I foud this manual: http://forum.xda-developers.com/showthread.php?t=2367322 but if I want to run aahk, command prompt reply:
Code:
File: "tools\bin\fre3vo" is missing or corrupt.
Download and extract again
Some virus scanners remove the necessary exploits for temproot.
Disable virus scan if that happens.
Pokračujte stisknutím libovolné klávesy...
I think only one way how this fix it is to gain S-OFF. Or does exist any other way?
..but I dont know how..
Click to expand...
Click to collapse
You can try with AAHK.
Here's the link for fre3vo: http://www.4shared.com/zip/nBCVzHMl/Fre3vo
If AAHK tell you that some files in tools\bin\ driectory missing, just find tham on google and download them.
Always turn off your virus scanners and HTC sync when you use aahk.