Hi I just purchased lg g2 sprint ls980
Which have ls980zve Build
And I'm unable to root this device
Through
iroot and temp and towel root
So I've decided to restore my phone
will try to root it again
There are three different firmwares
LS980ZV8
LS980ZVA
LS980ZVC
I'm unable to find which firmware to flash
please guide me
kafeel said:
Hi I just purchased lg g2 sprint ls980
Which have ls980zve Build
And I'm unable to root this device
Through
iroot and temp and towel root
So I've decided to restore my phone
will try to root it again
There are three different firmwares
LS980ZV8
LS980ZVA
LS980ZVC
I'm unable to find which firmware to flash
please guide me
Click to expand...
Click to collapse
Try the zv7 firmware using download mode on a computer. The zv8 is the next update after zv7. Try to root and get recovery on zv7 firmware.
http://www.rwilco12.com/forum/showthread.php?tid=96
Which is zv7 firmware
ryan012 said:
Try the zv7 firmware using download mode on a computer. The zv8 is the next update after zv7. Try to root and get recovery on zv7 firmware.
http://www.rwilco12.com/forum/showthread.php?tid=96
Click to expand...
Click to collapse
Where can I find zv7 firmware
And can I instal any sprint firmware?
And how to root
kafeel said:
Where can I find zv7 firmware
And can I instal any sprint firmware?
And how to root
Click to expand...
Click to collapse
It's on there in the zip file download to get to zv7. Use the www.towelroot.com while on zv7. Do you have a computer ? Do you know how to use download mode ?
Yes I have pc and I've already flashed lg g2 d802
But this phone is giving me hard time to root
kafeel said:
Yes I have pc and I've already flashed lg g2 d802
But this phone is giving me hard time to root
Click to expand...
Click to collapse
If your on the lg g2 ls980 why did you flash the d802 ? I think that's a different lg g2 model
No I mean previously I had d802
Now I have ls980 sprint
you can try what I said above and then say what happens here when you have done what the instructions say
why not try stump to root?
I've restored my phone
Successfully
And rooted successfully
Now problem is can't instal cloudy G3 and miui
Instalation done smoothly but stuck on boot loop
ryan012 said:
you can try what I said above and then say what happens here when you have done what the instructions say
Click to expand...
Click to collapse
I've restored my phone
Successfully
And rooted successfully
Now problem is can't instal cloudy G3 and miui
Instalation done smoothly but stuck on boot loop
kafeel said:
I've restored my phone
Successfully
And rooted successfully
Now problem is can't instal cloudy G3 and miui
Instalation done smoothly but stuck on boot loop
Click to expand...
Click to collapse
Do you have twrp ? What did you do when trying to flash the rom ? did you update your phone or stay at stock after getting root ?
I've tried both twrp and cwm Recovery
And rooted my phone through iOroot25
kafeel said:
I've tried both twrp and cwm Recovery
And rooted my phone through iOroot25
Click to expand...
Click to collapse
Did you try flashing the kernel after flashing rom ? When flashing roms, wipe cache, system, dalvik cache. When flashing kernels, wipe cache and dalvik cache before you restart. I used dorimanx kernel on cloudy g3 rom
ryan012 said:
Did you try flashing the kernel after flashing rom ? When flashing roms, wipe cache, system, dalvik cache. When flashing kernels, wipe cache and dalvik cache before you restart. I used dorimanx kernel on cloudy g3 rom
Click to expand...
Click to collapse
I didn't tried To flash kernel
And yes I did wipe dalvik cache and
Wiped system cache too still no luck
kafeel said:
I've tried both twrp and cwm Recovery
And rooted my phone through iOroot25
Click to expand...
Click to collapse
do you have both at same time on phone ?
Here it is
http://www.dorimanx.shine.sk/LG/
Wipe cache and dalvik cache, flash
Kernel-Dorimanx-V9.2-KK-[05-02]-[07-12]-LG-LS980-PWR-CORE.zip
then restart
if it won't flash. Flash older version first
No,, now I have only cwm Recovery
Which recovery do you have could you please give me the link
And could you please tell me the exact order to flash cloudy g3 with kernel
And it is compulsory to flash kernel?
kafeel said:
No,, now I have only cwm Recovery
Which recovery do you have could you please give me the link
And could you please tell me the exact order to flash cloudy g3 with kernel
And it is compulsory to flash kernel?
Click to expand...
Click to collapse
Are you on android 4.4 kitkat ?
If you are you can get twrp with this
https://www.androidfilehost.com/?w=files&flid=13763
Download flashify for root users app.
and download this. Make sure you downloaded the right model version.
http://dansroms.com/G2-TWRP/
extract the img file from it.
Run the app autorec
When it's done don't reboot yet.
run the app flashify foe root users and flash the img file for the twrp with thermal temperature control.
Reboot to recovery. make a full backup of everything. don't skip md5 verification. Leave it alone.
factory reset. Then advanced wipe, (cache, dalvik cache, system.) Flash cloudy g3.
advanced wipe ( cache and dalvik cache )
flash the latest version kernel for lg g2 ls980 first . if it won't flash, flash the other earlier version then wipe both caches and flash that one and wipe caches again. Reboot.
---------- Post added at 06:13 PM ---------- Previous post was at 06:04 PM ----------
kafeel said:
No,, now I have only cwm Recovery
Click to expand...
Click to collapse
You have cwm right now.
Is it safe to use autorec right now or do you have to remove cwm first ? You could try autorec and see if it works then do the rest of what I said
Related
I have been trying everything to successfully install CM 11.0 Kit Kat 4.4 on my Captivate Glide, to no avail.
I have followed these instructions numerous times:
http://forum.xda-developers.com/showthread.php?p=49743700
I have even used Superuser 3.2 RC2 arm signed and the RC3 versions for root.
Everytime I get my device rooted (which I have checked after the fact), I reboot into TWPR, factory reset and wipe the dalvik cache and then try to install the ROM. Everytime I try it has failed and I have to reflash a stock rom.
What in the sam hell am I doing wrong?
taydayrey said:
I have been trying everything to successfully install CM 11.0 Kit Kat 4.4 on my Captivate Glide, to no avail.
I have followed these instructions numerous times:
http://forum.xda-developers.com/showthread.php?p=49743700
I have even used Superuser 3.2 RC2 arm signed and the RC3 versions for root.
Everytime I get my device rooted (which I have checked after the fact), I reboot into TWPR, factory reset and wipe the dalvik cache and then try to install the ROM. Everytime I try it has failed and I have to reflash a stock rom.
What in the sam hell am I doing wrong?
Click to expand...
Click to collapse
are you on 4.0.4?
What version of TWRP are you using (you need to use Bubor's latest TWRP, Fetch it here)
taydayrey said:
I have been trying everything to successfully install CM 11.0 Kit Kat 4.4 on my Captivate Glide, to no avail.
I have followed these instructions numerous times:
http://forum.xda-developers.com/showthread.php?p=49743700
I have even used Superuser 3.2 RC2 arm signed and the RC3 versions for root.
Everytime I get my device rooted (which I have checked after the fact), I reboot into TWPR, factory reset and wipe the dalvik cache and then try to install the ROM. Everytime I try it has failed and I have to reflash a stock rom.
What in the sam hell am I doing wrong?
Click to expand...
Click to collapse
what he said, use the latest TWRP.
Yes, I am running 4.0.4
And I have only been able to use TWRP 2.6.3 (2.6.3.1)...using odin to flash it.
I wanted to use 2.6.3.4 but it was just a zipped recovery image. I thought you couldn't use a zip when installing a recovery? I just wasn't clear on which would actually work.
taydayrey said:
Yes, I am running 4.0.4
And I have only been able to use TWRP 2.6.3 (2.6.3.1)...using odin to flash it.
I wanted to use 2.6.3.4 but it was just a zipped recovery image. I thought you couldn't use a zip when installing a recovery? I just wasn't clear on which would actually work.
Click to expand...
Click to collapse
there is NO 2.6.3.4.
Actually you need 2.7, but version string is 2.6.3.
Recovery without selinux would fail, I dont know other reason to fail. Try to install 2.6.3.1.zip from recovery, reboot to recovery, and install cm again.
stormdude124 said:
are you on 4.0.4?
What version of TWRP are you using (you need to use Bubor's latest TWRP, Fetch it here)
Click to expand...
Click to collapse
2.6.3.4 at http://dualhoki.vim.hu/bubor/dev/twrp-i927/twrp-2.6.3-4.zip
Check for latest by browsing http://dualhoki.vim.hu/bubor/dev/twrp-i927/
---------- Post added at 11:56 AM ---------- Previous post was at 11:50 AM ----------
xqme said:
2.6.3.4 at http://dualhoki.vim.hu/bubor/dev/twrp-i927/twrp-2.6.3-4.zip
Check for latest by browsing http://dualhoki.vim.hu/bubor/dev/twrp-i927/
Click to expand...
Click to collapse
2.6.3-4 not 2.6.3.4 sorry
I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
sinoka56 said:
I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
Click to expand...
Click to collapse
Mj5 is fine for flashing any 4.3 or 4.4.2 rom just click on my signature and look for how to wipe your phone via philz follow those steps and flash phantom rom if still gives you issue then flash latest twrp you'll find the links for it in my signature as well and steps how to wipe via twrp good luck
Sent from my GT-N7100 using Tapatalk
I installed TWRP recovery but when I factory reset / wipe data, dalvik, data, system it doesn't format the system
You can try another recovery through odin, if it fails flash stock rom through odin. Make sure you flash one which is as least as new bootloader. Then start from square one.
Witch version of TWRP do you use ?
To do full wipe I use Zoot Wipe script, but be careful it remove everything :
http://forum.xda-developers.com/showthread.php?t=2121347
my lg was running stock kitkat then i rooted it correctly then i installed TWRP
i rebooted into recovery then i wiped all and format all
then i restart and i stucked into lg boot
i still can acsess download mode
Help please
Why did you wipe and format everything without flashing a new rom? Can you still access TWRP? If so, just pick whatever rom you want to flash and flash it.
ahmedatala said:
my lg was running stock kitkat then i rooted it correctly then i installed TWRP
i rebooted into recovery then i wiped all and format all
then i restart and i stucked into lg boot
i still can acsess download mode
Help please
Click to expand...
Click to collapse
Lol, are you wondered by the facto you can´t boot android?
Enter twrp again please and reflash a rom
So i recently installed TWRP version 3.0.0-0 and i wan to get out of it but when i reboot it it jus goes back to TWRP instead of booting into my device if you know how to fix it please help
It seems that you have uninstalled your rom.
how did you flash twrp and what's your rom?
darknessd31 said:
It seems that you have uninstalled your rom.
how did you flash twrp and what's your rom?
Click to expand...
Click to collapse
I Used Flasify to get TWRP and i was trying to get Cyanegen Mod
did you wipe anything?
flash with Odin your samsung firmware stock.
if you want cm13 download it from their website
put it in your memory
go to twrp (it is better to install it again with odin )
wipe system,cache,data
install cm13 and gapps
have fun
**becareful you should download your device specefic rom
darknessd31 said:
if you want cm13 download it from their website
put it in your memory
go to twrp (it is better to install it again with odin )
wipe system,cache,data
install cm13 and gapps
have fun
**becareful you should download your device specefic rom
Click to expand...
Click to collapse
I reinstalled the rom so every thing is fine
darknessd31 said:
did you wipe anything?
Click to expand...
Click to collapse
No But i reflashed the rom and everything in fine now
Hey guys. I am still on marshmallow on my op3. I am rooted and have twrp recovery. My question is what firmware/modem do I need to flash before I update to latest Nougat update and if my steps below are correct.
I would prefer not to do a clean install.
My steps would be:
Download full rom
Flash any firmware if required - this is what I need to know
Flash Magisk as I need root
Profit?
cd69 said:
Hey guys. I am still on marshmallow on my op3. I am rooted and have twrp recovery. My question is what firmware/modem do I need to flash before I update to latest Nougat update and if my steps below are correct.
I would prefer not to do a clean install.
My steps would be:
Download full rom
Flash any firmware if required - this is what I need to know
Flash Magisk as I need root
Profit?
Click to expand...
Click to collapse
this is stock rom, you don't need to flash any firmware...
if you're coming from MM, i would recommend sideloading the rom, wipe everything, then go back to stock recovery then sideload then before 1st boot fastboot TWRP again, then reboot to TWRP and flash Magisk...Profit.
if you want to flash from TWRP without going through this (which i don't recommend), make sure in TWRP to format data as f2fs, wipe everything then flash the rom, and then form TWRP flash TWRP again, then reboot to recovery (not system), then flash Magisk.
theduke7 said:
this is stock rom, you don't need to flash any firmware...
if you're coming from MM, i would recommend sideloading the rom, wipe everything, then go back to stock recovery then sideload then before 1st boot fastboot TWRP again, then reboot to TWRP and flash Magisk...Profit.
if you want to flash from TWRP without going through this (which i don't recommend), make sure in TWRP to format data as f2fs, wipe everything then flash the rom, and then form TWRP flash TWRP again, then reboot to recovery (not system), then flash Magisk.
Click to expand...
Click to collapse
Thanks a ton for replying. Another question for you. I get the OTA notification. I could just let that run and flash twrp after the installation right.
cd69 said:
Thanks a ton for replying. Another question for you. I get the OTA notification. I could just let that run and flash twrp after the installation right.
Click to expand...
Click to collapse
if you're already rooted it wont install..and you can't flash the small ota file from TWRP, you have to flash the Full rom (1.4 GB)...
how you download is up to you, but why download from the update when there's many links available around !
Thanks for all the help. I flashed the new update successfully.
cd69 said:
Thanks for all the help. I flashed the new update successfully.
Click to expand...
Click to collapse
what steps did you follow ? did you have to wipe internal memory fully ?
netcitizen said:
what steps did you follow ? did you have to wipe internal memory fully ?
Click to expand...
Click to collapse
I just flashed the full Rom with Magisk. Wiped dalvick cache and nothing else. So far so goos.
cd69 said:
I just flashed the full Rom with Magisk. Wiped dalvick cache and nothing else. So far so goos.
Click to expand...
Click to collapse
Oh ok. I just flashed full rom via twrp after wiping cache and Dalvik cache.it updated fine. I wasn't sure of magisk.