Develop Bugs

urgent help required!!!

guys please help i cant boot into recovery!!!
it just flashes then boots into the rom.
im currently using the cm9 build
ive tried every thing inc. flashinng interim recovery but does not work! what should i do please suggest!!!

i really don't know, but since i'm here i'll guess. if you did "fastboot flash recovery recovery.img" or however and it still isn't working, then ask that tripping raver person what's going on.

You done a flashboot erase cache
Sent from my HTC One X using XDA

im getting no response on modaco! everyone else on his rom seems to be able to boot into recovery!
yes that is the command i ran.....

if you mean rebooting into recovery from the power menu, then i think i read something about not being able to do that without true s-off. you have to go the manual way. i might be wrong, but you might be worrying about something nobody can actually do yet.

dragon546 said:
You done a flashboot erase cache
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
problem solved thanks so much!!!
gosh i love the guys at xda everyones so damn helpful and noob-friendly!

brent8577 said:
if you mean rebooting into recovery from the power menu, then i think i read something about not being able to do that without true s-off. you have to go the manual way. i might be wrong, but you might be worrying about something nobody can actually do yet.
Click to expand...
Click to collapse
no i meant through the bootloader
anyways problem solved thanks to you guys!

How to... I've tried to install four ROMS

Can someone please tell me what I'm doing wrong.. I've tried to install four ROMs and I get to the reboot screen and I reboot and it loads up and then twenty minutes later and still in the boot animation screen an hour later still on the boot animation screen.. two hours later still on the boot animation screen.. I'm no rookie at flashing if had iPhone, evo 4g, gs3 but this puzzles me I have used twrp on all my devices except the I phone so I'd like to think I know what I'm doing but I just can't get any ROM to boot up successfully on this thing I've tried paranoid Android, miui , a few jelly Bean ROMs and still none will go past the boot animation... Help please
Sent from my SPH-L710 using Tapatalk 2

Look up how to correct a boot loop or get out of fastboot mode......there are more than enough threads about your issue plaguing the Q&A forum

guitarman2010 said:
Look up how to correct a boot loop or get out of fastboot mode......there are more than enough threads about your issue plaguing the Q&A forum
Click to expand...
Click to collapse
Bro I see your name all over the kindle thread. If checked the Q&A forum and I don't see where someone has the exact same problem I'm having.. I already know how to get out of fast boot.. but as I stated I just want to know why four different ROMs would not install after waiting a hour at the boot animation screen .. all I see is a thread with links that go to more pages with links.... its making my head spin.. but as I said you Are all over this kindle thread and you seem like a pretty knowledgeable guy so can you just tell me what I'm doing wrong and or link me exactly where I can find exactly what I'm looking for which is how to install a ROM and have it boot up.. thanks in advance very knowledgeable guy and very helpful guy
Sent from my SPH-L710 using Tapatalk 2

monty_python said:
Bro I see your name all over the kindle thread. If checked the Q&A forum and I don't see where someone has the exact same problem I'm having.. I already know how to get out of fast boot.. but as I stated I just want to know why four different ROMs would not install after waiting a hour at the boot animation screen .. all I see is a thread with links that go to more pages with links....
Click to expand...
Click to collapse
So did you come from stock 6.3.1? What did you use to root your KF? what did you use to install your ROM? these would all be helpful answers. Thanks.

monty_python said:
Bro I see your name all over the kindle thread. If checked the Q&A forum and I don't see where someone has the exact same problem I'm having.. I already know how to get out of fast boot.. but as I stated I just want to know why four different ROMs would not install after waiting a hour at the boot animation screen .. all I see is a thread with links that go to more pages with links.... its making my head spin.. but as I said you Are all over this kindle thread and you seem like a pretty knowledgeable guy so can you just tell me what I'm doing wrong and or link me exactly where I can find exactly what I'm looking for which is how to install a ROM and have it boot up.. thanks in advance very knowledgeable guy and very helpful guy
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Don't know if ur being sarcastic or not but if all else fails.....go back to complete stock (no root, stock Amazon 6.3.1), re-root and try again. There have been a number of not so good issues with the newest TWRP. I have been using TWRP version 2.2.2.1 and have flashed many ROMs with no complication
Sent from my SCH-R880 using xda app-developers app

Please close
Sent from my SPH-L710 using Tapatalk 2

Josepho1997 said:
Did you figure it out?
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
Yeah I did with a lil help.. thanks for asking...
Sent from my Amazon Kindle Fire using Tapatalk 2

monty_python said:
Yeah I did with a lil help.. thanks for asking...
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
What was it? I have the identical issue.
Thanks!

rootshot said:
What was it? I have the identical issue.
Thanks!
Click to expand...
Click to collapse
TWRP.......use version 2.2.2.1
Sent from my rooted SCH-R880 POS

[Q] Kindle Fire 2 (10.4.1) Red Screen Recovery

Hi there,
I would like to ask if there is someone that could help me solve my problem.
I was going to install a custom ROM from Hashcode (OFFICIAL CM10.1), but before I had a chance to flash it I stumbled upon a problem when I tried to flash TWRP from TWEEZERMOD 1-CLICK cordless METHOD, I downloaded TWRP ran it and while it was installing
it rebooted my Kindle Fire 2 I could see Kindle Fire logo and after that flowed by RED SCREEN and no way out of there, I can turn it off when I
long press the power button for 20 seconds, but after I turn it on same thing happens Kindle Fire logo and followed by RED Screen.
I purchased a fastboot cable from Ebay
and after plugging it into my KF2 and then into my laptop, I'm stuck at Fastboot screen with a traffic light BLINKING GREEN.
Can anyone help me with the next steps, as I have no idea what to do, and I tried to google this with no luck.
Thank in advance ​

Screen
Actually I followed your instructions at the beggining of your thread and they worked like a charm, the KF First Aid didn't for some reason,
But anyway thank you lots.
For people who have the same problem just download this tool from mindmajick
Restoration tool link:
Once downloaded run the tool and in the options choose
1st Check fastboot status
2nd Erase cache and userdata
3rd Restore-Boot and recovery
4th then wait after your Kindle will be booting for a bit, at some point I thought I was stuck at the booting logo but it was just preparing your KF2
SUCCESS =D

Follow the instructions in my post.. It's the last one in the thread:
http://forum.xda-developers.com/showthread.php?t=2035047
Read the OP first and download the tool in post #2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Red Screen Kindle Fire 2 Help
mindmajick said:
Follow the instructions in my post.. It's the last one in the thread:
http://forum.xda-developers.com/showthread.php?t=2035047
Read the OP first and download the tool in post #2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Will have a look and try it out,
I will let you know if it worked asap
Thank you for now:good:

Red Screen Kindle Fire 2 Help
mindmajick said:
Follow the instructions in my post.. It's the last one in the thread:
http://forum.xda-developers.com/showthread.php?t=2035047
Read the OP first and download the tool in post #2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Hi there again,
I'm completely lost,
I don't even know how to mount raw system image file nor what it is,
maybe if that is fine for you, could you send me a step by step guide please.
Kind REGARDS :fingers-crossed:

Huh? The instructions there are simpler than rooting and installing custom ROM.
You might be better off with this tool. And you can ask the OP any questions you have since he's very active
http://forum.xda-developers.com/showthread.php?t=2096888
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Red Screen Kindle Fire 2 Help
I have had a look at that one and for some reason the KF First Aide cannot find my device,
it keeps giving me this message whenever I try to Completly restore or Display the fastboot Status
"The system cannot find the path specified".
I would like to try it your way but as I don't understand the terms used it your instructions or procedures I'm unable to do so,
that is why I asked for you step by step guide.
So when I got to your post I went straight into last page number 4
Followed these steps
QUOTE:
DRIVERS- USE THE ONES IN THIS POST- http://forum.xda-developers.com/show....php?t=1893838
ADB- USE THE ADB FROM THE KINDLE FIRE FIRST AID TOOL-
http://forum.xda-developers.com/show....php?t=2096888
I installed Kindle fire First AID tool and also installed the drivers needed, unistalled SDK.
Now I don't know what to do, can you help me please?

Red Screen Kindle Fire 2 Help Solved
Actually I followed your instructions at the beggining of your thread and they worked like a charm, the KF First Aid didn't for some reason,
But anyway thank you lots.
For people who have the same problem just download this tool from mindmajick
Restoration tool link:
Once downloaded run the tool and in the options choose
1st Check fastboot status
2nd Erase cache and userdata
3rd Restore-Boot and recovery
4th then wait after your Kindle will be booting for a bit, at some point I thought I was stuck at the booting logo but it was just preparing your KF2
aSUCCESS =D

Red Screen Kindle Fire 2 Help
mindmajick said:
Follow the instructions in my post.. It's the last one in the thread:
http://forum.xda-developers.com/showthread.php?t=2035047
Read the OP first and download the tool in post #2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
And one more question,
I just check the list of my apps and I see that my super user is still there and working,
does that mean my Kindle is still rooted?
If so is there any way I could install Gapps on it, the version of my Kindle Fire 2 is 10.4.1
Thank you:highfive:

Upgrading your Kindle Fire 2
I will be making a new thread about transforming your Kindle Fire 2 into and Android table if I can get it right it'll be step by step guide. :good:

nanotibz said:
And one more question,
I just check the list of my apps and I see that my super user is still there and working,
does that mean my Kindle is still rooted?
If so is there any way I could install Gapps on it, the version of my Kindle Fire 2 is 10.4.1
Thank you:highfive:
Click to expand...
Click to collapse
You know there is cm10 for kf2 .-.
Sent from my air conditioner unit running CyanogenMod

Installing your custom ROM on my KF2"
dugoy13 said:
You know there is cm10 for kf2 .-.
Sent from my air conditioner unit running CyanogenMod
Click to expand...
Click to collapse
Hello there,
Yes I do know that, but as it didn't work for me to install TWRP which is quite important for flashing a new ROM
I will be doing a step by step guide that worked for me.
You see I was following the instruction for Hashcode CM 10.1 and when I tried to install TWRP on my KF2
I got stuck at the Red Screen, and then I had to unbrick my KF2, thanks to Mindmajick I unbricked.

nanotibz said:
Hello there,
Yes I do know that, but as it didn't work for me to install TWRP which is quite important for flashing a new ROM
I will be doing a step by step guide that worked for me.
You see I was following the instruction for Hashcode CM 10.1 and when I tried to install TWRP in my KF2
I got stuck at the Red Screen, which thanks to Mindmajick I unbricked.
Click to expand...
Click to collapse
I check now, if the secruity hole is fixed in 10.4.1
Gesendet von meinem LG-P990 mit Tapatalk 2

Installing your custom ROM on my KF2"
flopower1996 said:
I check now, if the secruity hole is fixed in 10.4.1
Gesendet von meinem LG-P990 mit Tapatalk 2
Click to expand...
Click to collapse
Thank you, looking forward to hear from you :good:

Ok i also faced the Red screen bug. I fixed it by downgrading the bootloader via fastboot
Gesendet von meinem KFOT mit Tapatalk 2

Installing your custom ROM on my KF2"
flopower1996 said:
Ok i also faced the Red screen bug. I fixed it by downgrading the bootloader via fastboot
Gesendet von meinem KFOT mit Tapatalk 2
Click to expand...
Click to collapse
Would you be so kind in assisting me to do that please?

nanotibz said:
Would you be so kind in assisting me to do that please?
Click to expand...
Click to collapse
Yes i am preparing a thread.
Gesendet von meinem KFOT mit Tapatalk 2

nanotibz said:
Hello there,
Yes I do know that, but as it didn't work for me to install TWRP which is quite important for flashing a new ROM
I will be doing a step by step guide that worked for me.
You see I was following the instruction for Hashcode CM 10.1 and when I tried to install TWRP on my KF2
I got stuck at the Red Screen, and then I had to unbrick my KF2, thanks to Mindmajick I unbricked.
Click to expand...
Click to collapse
I've got a Factory cable on the way, will be here tomorrow.
Also DL'd the KF2 SRT from MindMajick, I'm assuming this does require said Factory Cable, no?
Thanks!

Red Screen Kindle Fire 2 Help Solved
andrew2163 said:
I've got a Factory cable on the way, will be here tomorrow.
Also DL'd the KF2 SRT from MindMajick, I'm assuming this does require said Factory Cable, no?
Thanks!
Click to expand...
Click to collapse
Yes it does I bought one from Ebay, and once you get it just plug the cable into your KF2, then to your computer and follow the instructions at the beginning of this post. :good:

ok here you go: http://forum.xda-developers.com/showthread.php?p=42062477#post42062477

[Q] bootloop on stock bootloader

it loops the roms logo. i think it was a bad flash so the rom won't boot.
i am on the stock bootloader and have no idea how to get into recovery. when i plug the device into the computer it doesn't recognize it. do i need a factory cable or is there a fix for this? =(

aaron.a said:
it loops the roms logo. i think it was a bad flash so the rom won't boot.
i am on the stock bootloader and have no idea how to get into recovery. when i plug the device into the computer it doesn't recognize it. do i need a factory cable or is there a fix for this? =(
Click to expand...
Click to collapse
Yes, you need a factory cable to get into fastboot so you can wipe data, or access custom recovery so you can reflash your ROM.

soupmagnet said:
Yes, you need a factory cable to get into fastboot so you can wipe data, or access custom recovery so you can reflash your ROM.
Click to expand...
Click to collapse
Thanks. I was afraid of that. Oh well, I want the cable anyway =D
Sent from my One X using Tapatalk 4 Beta

aaron.a said:
Thanks. I was afraid of that. Oh well, I want the cable anyway =D
Sent from my One X using Tapatalk 4 Beta
Click to expand...
Click to collapse
Just remember to always factory reset before flashing your ROMs.

aaron.a said:
it loops the roms logo. i think it was a bad flash so the rom won't boot.
i am on the stock bootloader and have no idea how to get into recovery. when i plug the device into the computer it doesn't recognize it. do i need a factory cable or is there a fix for this? =(
Click to expand...
Click to collapse
Hey aaron. I have the same problem. Stuck at rom logo after flash new room. Althought Kindle Fire Utility notice status "Online", but my device can't boot or do anything. I think it lost bootloader .
Plz tell me if u can fix this

tvpham said:
Hey aaron. I have the same problem. Stuck at rom logo after flash new room. Althought Kindle Fire Utility notice status "Online", but my device can't boot or do anything. I think it lost bootloader .
Plz tell me if u can fix this
Click to expand...
Click to collapse
Your bootloader is working just fine. What color is your Kindle Fire logo?

soupmagnet said:
Your bootloader is working just fine. What color is your Kindle Fire logo?
Click to expand...
Click to collapse
Color of logo "Kindle Fire" is White and Orange. But my device stucks at logo "Android" after logo "Kindle Fire" passed.
Here it's:
http://youtu.be/EVeH86OhOME

Yep, you need a factory cable. There seems to be a lot of that going around lately.

soupmagnet said:
Yep, you need a factory cable. There seems to be a lot of that going around lately.
Click to expand...
Click to collapse
Ok. Thankiu! I'll take one and try

Edit all the ROM threads installation instructions to point to a sticky called "firefirefire and you" lol
Sent from my One X using Tapatalk 4 Beta

soupmagnet said:
Yep, you need a factory cable. There seems to be a lot of that going around lately.
Click to expand...
Click to collapse
YEAH! Finally, I unbricked my KF using a factory cable . Many thanks @soupmagnet for your help

Please Help Stuck In boot loop...

If this does not belong here please advise and I will remove.
I could really use some help. I cant boot into the os. Here is what I did I had everything up and running twrp and root. I realized I accidently flashed the alpha build of twrp not the rc build so I dowloaded the rc zip and flashed it via twrp. It started boot looping into twrp. When I realized this I flashed back to the alpha 2 build and then booted my backup. I am now stuck at the android dancing dots. Can some one help me out please. Thanks for your time

specd_out said:
If this does not belong here please advise and I will remove.
I could really use some help. I cant boot into the os. Here is what I did I had everything up and running twrp and root. I realized I accidently flashed the alpha build of twrp not the rc build so I dowloaded the rc zip and flashed it via twrp. It started boot looping into twrp. When I realized this I flashed back to the alpha 2 build and then booted my backup. I am now stuck at the android dancing dots. Can some one help me out please. Thanks for your time
Click to expand...
Click to collapse
Boot into bootloader, use the latest Google stock factory image and use the flashall.bat with the -w removed inside the file. Let the batch file run and boot the OS using fully stock firmware. If it boots fine, go ahead and fastboot boot TWRP rc1 and flash TWRP rc1 zip and supersu zip.
Sent from my Pixel using Tapatalk

you have no idea how good it feels to see a reply. Thanks taking the time. forgive the stupid questions I may ask but is the factory img something I will flash inside twrp or is it through fast boot

specd_out said:
you have no idea how good it feels to see a reply. Thanks taking the time. forgive the stupid questions I may ask but is the factory img something I will flash inside twrp or is it through fast boot
Click to expand...
Click to collapse
Through fast boot..

specd_out said:
you have no idea how good it feels to see a reply. Thanks taking the time. forgive the stupid questions I may ask but is the factory img something I will flash inside twrp or is it through fast boot
Click to expand...
Click to collapse
Fastboot. Use the latest version from Google.
Search for "Nexus factory image download," grab the latest factory image for our device, and flash all. The aforementioned will overwrite your internal memory, and there is a way to preserve your internal data. You can read about it in the Q&A section.
Check the thread from @bajasur for guidance.
For your reference, threads like this belong in that same section, not development (a moderator will move this soon enough). There's also a noob friendly thread, where you can post most anything and folks will help.
Good luck, and please keep us posted.
Sent from my Pixel XL, #WhiteUIsMustDie, #EndDarkAppOppression

joetheshmo said:
Boot into bootloader, use the latest Google stock factory image and use the flashall.bat with the -w removed inside the file. Let the batch file run and boot the OS using fully stock firmware. If it boots fine, go ahead and fastboot boot TWRP rc1 and flash TWRP rc1 zip and supersu zip.
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
Thank you very much sir. I really appreciate
you taking the time.
Doing what he recommended fix my phone and I am ready to go

micmars said:
Fastboot. Use the latest version from Google.
Search for "Nexus factory image download," grab the latest factory image for our device, and flash all.
There are plenty of answers to your particular question in the Q&A forum, and I suggest that you read them.
For your reference, threads like this belong in that same section, not development (a moderator will move this soon enough). There's also a noob friendly thread, where you can post most anything and folks will help.
Good luck, and please keep us posted.
Sent from my Pixel XL, #WhiteUIsMustDie, #EndDarkAppOppression
Click to expand...
Click to collapse
i did see that section after I posted. I am sorry about that. I was kinda in a bit of a panic.

specd_out said:
i did see that section after I posted. I am sorry about that. I was kinda in a bit of a panic.
Click to expand...
Click to collapse
No worries, just for future reference.
Sent from my Pixel XL, #WhiteUIsMustDie, #EndDarkAppOppression

micmars said:
No worries, just for future reference.
Sent from my Pixel XL, #WhiteUIsMustDie, #EndDarkAppOppression
Click to expand...
Click to collapse
I just realized your a fellow local I am from the Spring Hill area. About 30 min north of Tampa

You guys are awesome for helping. It's just as easy to help someone as it is to flog them with the usual replies of "search" or "wrong thread". Nice to have good people here.

dmb219 said:
You guys are awesome for helping. It's just as easy to help someone as it is to flog them with the usual replies of "search" or "wrong thread". Nice to have good people here.
Click to expand...
Click to collapse
Very true. The info is out there but not knowing exactly what I did, there seems to be too many answers, and I was quickly overwelmed. After my two attempts to fix it failed I figured it was best to ask for help before I made the problem worse

dmb219 said:
You guys are awesome for helping. It's just as easy to help someone as it is to flog them with the usual replies of "search" or "wrong thread". Nice to have good people here.
Click to expand...
Click to collapse
Agreed! I was welcomed into these forums when I was still a noob and just wanted to pay it forward. Takes just as much effort to flame someone so might as well help out.
Glad you got it sorted @specd_out
Sent from my Pixel using Tapatalk