Dear friends,
I have a bricked t989. Screen wont start. I thin the phone ran out of space when I was trying to flash a ROM (silly me).
Here is what happens when I connect the phone to:
Windows7/XP laptop:
It start asking me to format the USB drive. Phone is not detected in Samsung Kies. It shows as a USB device ni system tray. IN computer management, a lots of drives appear and all seem to be healthy. The icons disappear when I hold the power button and come back when I press power button again. So it tells me the on and off is occuring, but nothing occurs on screen.
Linux PC:
I can see all the drives with all the contents. Including all my files, apps, system folders, etc. I see folders like image lib etc. And its writable too.
IS there any way I can flash a stock rom or something by copying some files to these folders or anyway I can use what I can see in Linux to put life back into my phone?
Many thanks for reading.
Have you tried getting into download mode and flashing a stock rom with Odin?
mehtajinesh said:
Dear friends,
I have a bricked t989. Screen wont start. I thin the phone ran out of space when I was trying to flash a ROM (silly me).
Here is what happens when I connect the phone to:
Windows7/XP laptop:
It start asking me to format the USB drive. Phone is not detected in Samsung Kies. It shows as a USB device ni system tray. IN computer management, a lots of drives appear and all seem to be healthy. The icons disappear when I hold the power button and come back when I press power button again. So it tells me the on and off is occuring, but nothing occurs on screen.
Linux PC:
I can see all the drives with all the contents. Including all my files, apps, system folders, etc. I see folders like image lib etc. And its writable too.
IS there any way I can flash a stock rom or something by copying some files to these folders or anyway I can use what I can see in Linux to put life back into my phone?
Many thanks for reading.
Click to expand...
Click to collapse
If u can see everything like that then ur not bricked, u need to put he phone in download mode by turning it off and holding vol-vol+ and connecting to PC, a screen should show and give u option to continue or cancel, press continue, now connect to windows via Odin, Samsung kies will not see the phone because u have a custom recovery, make sure kies isn't running/uninstall it if u can, open Odin v1.85 and wait till it says added, from there flash twrp v2.6.1.0 tar.file from here techerrata.com/browse/twrp2/hercules load the file via PDA option and press start in Odin, do not touch anything else besides PDA to load the file and start to initiate the flash, when its done and u get a green passed sign, DL ur fav ROM to ur PC, boot to recovery on the phone and select advanced/mount USB, transfer the file, flash the ROM (and gapps if needed) and reboot, phone should recover fine..
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
soupysoup said:
If u can see everything like that then ur not bricked, u need to put he phone in download mode by turning it off and holding vol-vol+ and connecting to PC, a screen should show and give u option to continue or cancel, press continue, now connect to windows via Odin, Samsung kies will not see the phone because u have a custom recovery, make sure kies isn't running/uninstall it if u can, open Odin v1.85 and wait till it says added, from there flash twrp v2.6.1.0 tar.file from here techerrata.com/browse/twrp2/hercules load the file via PDA option and press start in Odin, do not touch anything else besides PDA to load the file and start to initiate the flash, when its done and u get a green passed sign, DL ur fav ROM to ur PC, boot to recovery on the phone and select advanced/mount USB, transfer the file, flash the ROM (and gapps if needed) and reboot, phone should recover fine..
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have this same problem, but can't get mine to work.
While back, I flash and play around with lots of roms. One day my t989 went dead, after flashing, can't remember the detail. Anyway, so now, when I plug in the usb cable, the computer dings and a message pops up saying I need to format the disk drive before I can use it. Options are "Format disk" or "Cancel". I can't format, it keeps saying to check the disk and make sure it is connected properly and try again. Only option is Cancel. Odin can't see it either. Kies can't see it. Also, Kies is uninstalled and PC is rebooted. Still no luck.
What else can I try?
navy2012 said:
I have this same problem, but can't get mine to work.
While back, I flash and play around with lots of roms. One day my t989 went dead, after flashing, can't remember the detail. Anyway, so now, when I plug in the usb cable, the computer dings and a message pops up saying I need to format the disk drive before I can use it. Options are "Format disk" or "Cancel". I can't format, it keeps saying to check the disk and make sure it is connected properly and try again. Only option is Cancel. Odin can't see it either. Kies can't see it. Also, Kies is uninstalled and PC is rebooted. Still no luck.
What else can I try?
Click to expand...
Click to collapse
First of all u never never format a phone from a PC like that, the device has certain partitions that hold crucial info such as imei, sys data, recovery info, and formating wipes all of that so that's a no no, second if by chance u flashed the wrong ROM or a wrong anything bad things happen, the fact that it even asks u to format the disk tells me something is wrong, try holding vol-vol+ while connecting phone to PC when the phone is off, if its recoverable it will enter download mode, if that doesn't work u can try a USB jig, which will force the device into DL mode and at most there a couple dollars on eBay or amazon, so its worth it to fix the phone, if neither of those options work then congrats man u have officially hard bricked ur device, frame it an mount it on the wall lol
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Ok so first, let me say I know I done goofed. What happened was my phone (Note 2 GT-N7100) started to choke up a lot, battery life was ridiculously low and then suddenly my phone's language was constantly being switched to Italian.
I thought it might be a virus but a scan couldn't find anything. I deleted almost all apps in hopes it would stop but the phone went on with these weird glitches. In an act of desperation, I decided to wipe out everything and go back to factory settings.
Thing is my phone is rooted and I had the X Note Rom installed. When I tried the factory reset on TWRP, it still went back to the X Note Rom. That's when I dun goofed. I deleted EVERY ****ING THING in a desperate and stupid move.
Now when I press Volume Up + Home + Power I can get to Recovery Mode but I ain't got **** to install. If I press Volume Down + Home + Power I get into Odin mode but get a "Downloading... Do not turn off target!!" message that just hangs there forever.
To top it off, my computer won't recognize the damn phone anymore. Am I ****ed? Can I get myself out of this mess?! Please HELP!!!
Take it easy, download a custom rom, transfer it to the SD card, enter recovery and Flash it.
Since you can't connect the phone via USB, you need a SD card reader (if you have a laptop you 100% have it)
OR
You could flash the stock ROM through Odin, but it's more risky in my opinion. I would go with the 1st method
Mashed_Potatoes said:
Take it easy, download a custom rom, transfer it to the SD card, enter recovery and Flash it.
Since you can't connect the phone via USB, you need a SD card reader (if you have a laptop you 100% have it)
OR
You could flash the stock ROM through Odin, but it's more risky in my opinion. I would go with the 1st method
Click to expand...
Click to collapse
thanks... i'll try that when i get home (my SD card is there).
@edit i whrited the wrong model.....it I747 NOT 797
Again....excuse if i'm posting on the wrong place cause i'm really newbie on this forum things......
My problem is that while tring to reinstall my 4.3 droid i went to this thread http://forum.xda-developers.com/showthread.php?t=2498233 and tried using these files to get another rom, so as it mentioned i started flashing the boot loader but via odin i coudn't as odin negated to proceed due to errors. Them i triede odin multiloader them i tried TWRP them i ended up messing everythin tring via Clock work mod recovery. I just got the process well done and them when the system tries to boot it just won't boot. The eternal black screen looks like i have to a Hard Brick and even if while i try the usb cable the computer responds to the device, i couldn't take it to Download Mode.
After some research i have see that it's possible to make a debrick via SD card.
So.....i'm exactly........cring for help, any good soul that have a litle time to explain me a couple things if i can or i cannot debrick it without spending money. IS my time is running cause i got my SIM card cut and this is my only phone now.
Sorry again for anything.......hope somthing comes but while it not come i will keep researching thanks verybody.
@update Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file to the sd card
Farahjr said:
Again....excuse if i'm posting on the wrong place cause i'm really newbie on this forum things......
My problem is that while tring to reinstall my 4.3 droid i went to this thread http://forum.xda-developers.com/showthread.php?t=2498233 and tried using these files to get another rom, so as it mentioned i started flashing the boot loader but via odin i coudn't as odin negated to proceed due to errors. Them i triede odin multiloader them i tried TWRP them i ended up messing everythin tring via Clock work mod recovery. I just got the process well done and them when the system tries to boot it just won't boot. The eternal black screen looks like i have to a Hard Brick and even if while i try the usb cable the computer responds to the device, i couldn't take it to Download Mode.
After some research i have see that it's possible to make a debrick via SD card.
So.....i'm exactly........cring for help, any good soul that have a litle time to explain me a couple things if i can or i cannot debrick it without spending money. IS my time is running cause i got my SIM card cut and this is my only phone now.
Sorry again for anything.......hope somthing comes but while it not come i will keep researching thanks verybody.
Click to expand...
Click to collapse
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
edit: if that does not help use this link http://forum.xda-developers.com/showthread.php?t=2345860
get a usb jtag if you cant access download mode
doesnt work Mobiletechvideos.com is there to debrick your phone for a good price
winosxbuntu said:
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
Click to expand...
Click to collapse
1-Yes it's a AT&T i747 as i had my self upgrading downgrading upgrading again and rooteing the device the last time. I think that i possibly flashed something on these steps that gave me this problem after tring to flash the method on the link that i mentioned.
5- It's hard bricked cause i can't go into download mode. I'm reading this http://forum.xda-developers.com/showthread.php?p=43305728
I forgot to say....i'm not helpfull with the thecnical english language. I'm a braziliam and i really to only get the most simple threads that i can just in case to not comit any mistakes due to language issues.
My nightmares have come.......so i'm just installing a Virtual Machine fo Ubuntu and try to load the img to an 8gb SD series 4 i know that the recomended is 16 gb 10 series but i will try the process anyway just to get experience.
But still wanna help if anybody comes with more! thanks!
Farahjr said:
1-Yes it's a AT&T i747 as i had my self upgrading downgrading upgrading again and rooteing the device the last time. I think that i possibly flashed something on these steps that gave me this problem after tring to flash the method on the link that i mentioned.
5- It's hard bricked cause i can't go into download mode. I'm reading this http://forum.xda-developers.com/showthread.php?p=43305728
I forgot to say....i'm not helpfull with the thecnical english language. I'm a braziliam and i really to only get the most simple threads that i can just in case to not comit any mistakes due to language issues.
My nightmares have come.......so i'm just installing a Virtual Machine fo Ubuntu and try to load the img to an 8gb SD series 4 i know that the recomended is 16 gb 10 series but i will try the process anyway just to get experience.
But still wanna help if anybody comes with more! thanks!
Click to expand...
Click to collapse
cry a little, maybe the phone will accept your apologizes and resurrect from the dead
again it may not work so don't get your hopes up to high ITS A TRIAL AND ERROR situation WITH HARD BRICKS...........
some people have successfully debricked their device, so again you have to be patient and know exactly what you are doing and dont panic
Remember Mobiletechvideos.com can fix it in less than 25 minutes depending on your phone :laugh:and they are affordable :good:
Your pretty much stuck if you can't recover via SD card.
Remember there are a lot of options for JTAG repair, research local repairs by Kijiiji and also places like Mobile Tech Videos. Always search for legitimacy and best price.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
winosxbuntu said:
cry a little, maybe the phone will accept your apologizes and resurrect from the dead
again it may not work so don't get your hopes up to high ITS A TRIAL AND ERROR situation WITH HARD BRICKS...........
some people have successfully debricked their device, so again you have to be patient and know exactly what you are doing and dont panic
Remember Mobiletechvideos.com can fix it in less than 25 minutes depending on your phone :laugh:and they are affordable :good:
Click to expand...
Click to collapse
I'm almost crying. As a brazilian those devices are a litle difficult to access as i should need to import and the Dollar is expensive for me that's why i will try every way it's possible before tring someeone that have a box on brazil and pay for it.
Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file.
@update i have done with the burning img thing. It won't worked but i shall try again tomorrow with a 16GB serie 10 SD card!
Octopus
Farahjr said:
I'm almost crying. As a brazilian those devices are a litle difficult to access as i should need to import and the Dollar is expensive for me that's why i will try every way it's possible before tring someeone that have a box on brazil and pay for it.
Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file.
@update i have done with the burning img thing. It won't worked but i shall try again tomorrow with a 16GB serie 10 SD card!
Click to expand...
Click to collapse
I couldn't get a card with those parameters........
For my lucky......my company has purchased an octopus box that supports SGH-I747...i never used this before never saw never touched i'm just reading tutorials but a i couldn't find any tutorial about unbricking with the box. Any one know if it's possible to solve this easily via box???
Farahjr said:
I couldn't get a card with those parameters........
For my lucky......my company has purchased an octopus box that supports SGH-I747...i never used this before never saw never touched i'm just reading tutorials but a i couldn't find any tutorial about unbricking with the box. Any one know if it's possible to solve this easily via box???
Click to expand...
Click to collapse
Octopus box will not do this work in contact with the support so now i am waiting for the arive of the micro SD 16 GB class10. Will update the post when it arrives.
Farahjr said:
Octopus box will not do this work in contact with the support so now i am waiting for the arive of the micro SD 16 GB class10. Will update the post when it arrives.
Click to expand...
Click to collapse
Tried via sd but nothing happened.
Will try again with another image and charging the battery.
winosxbuntu said:
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
edit: if that does not help use this link http://forum.xda-developers.com/showthread.php?t=2345860
get a usb jtag if you cant access download mode
doesnt work Mobiletechvideos.com is there to debrick your phone for a good price
Click to expand...
Click to collapse
Is it 100% chance to get in to download mode via JIG????
I'm having trouble tring to refind the all the possible debrick images that I should try so i'm thinking about doing a JIG by my self. Any free solution i will try before spending any Money on something I don't know if will really work.
Farahjr said:
Is it 100% chance to get in to download mode via JIG????
I'm having trouble tring to refind the all the possible debrick images that I should try so i'm thinking about doing a JIG by my self. Any free solution i will try before spending any Money on something I don't know if will really work.
Click to expand...
Click to collapse
if its hard bricked then its a 50/50 chance, i would recommend trying to boot using the debrick.img on the SD-CARD and hope some magic will happen otherwise yu might have to spend some money to fix or just buy a new phone
Can’t access to Download Mode or Recovery Mode after bricking AT&T Galaxy S3 i744 4.3
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start
The installation seemed to go right, the program never showed anything weird.
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
I747
winosxbuntu said:
if its hard bricked then its a 50/50 chance, i would recommend trying to boot using the debrick.img on the SD-CARD and hope some magic will happen otherwise yu might have to spend some money to fix or just buy a new phone
Click to expand...
Click to collapse
It's been a while sorry about beinging away.
A guy who says that have a JTAG service tried and coudn't recover it. So I left it there because it have a broken display and a broken firmware and it' is from outside Brazil and after the FIFA CUP Anatel will lock operation of devices that models are not sold on Brazil and I747 is probably included on the list.
So i gave up from my phone and bought a Nexus 5.
The case is closed!
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790321
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790322 View attachment 2790323
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790324
The installation seemed to go right, the program never showed anything weird. View attachment 2790325
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790326
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/showthread.php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Stuck in AT&T logo
Larry2999 said:
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/showthread.php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Click to expand...
Click to collapse
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Maralex1520 said:
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Click to expand...
Click to collapse
Okay. At least, we are almost there. Try booting into recovery mode and doing a hard wipe/reset. If this doesn't work, then you could try reinstalling the 4.3 stock firmware. You may need to reflash custom recovery as the initial flashing would have returned you to stock recovery. If you have to do the firmware flashing again, please make sure you clear your cache/dalvik before rebooting to system.
happy to see this thread resolved, this is what XDA is all about, no matter how fd up something sounds, a community like xda will find a fix for it even if it takes months
And the award of the Q/A thread goes to Larry and everyone in this post for trying and failing but succeeding at the end :laugh:
anywayz happy rooting and be careful, no-one wants to end with a brick cheers and keep this place awsome
Galaxy S3 i747 fixed after hardbrick
Larry2999 said:
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/show....php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2a....3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Click to expand...
Click to collapse
Hey Larry2999 I want to really thank you for your help it was so helpful, actually I discovered that the battery of the Galaxy S3 was failing thats why when I turned on the phone it turned off after a seconds althoughthe battery was charged, so I connected the charger to the phone and it started normally. Now I can use it and it has android 4.3.
Your method was right, and thanks to take the time to answer. I hope it can help someone else too.
Maralex1520 said:
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Click to expand...
Click to collapse
Hey I cannot get into download mode, and I´m exactly in the same problem you were. How did you get into download mode? I haven´t used usb JIG since I cannot get one from where i live.
I´ll be really thankful in you help me!:angel:
Maralex1520 said:
Hey Larry2999 I want to really thank you for your help it was so helpful, actually I discovered that the battery of the Galaxy S3 was failing thats why when I turned on the phone it turned off after a seconds althoughthe battery was charged, so I connected the charger to the phone and it started normally. Now I can use it and it has android 4.3.
Your method was right, and thanks to take the time to answer. I hope it can help someone else too.
Click to expand...
Click to collapse
Glad to know it's working fine now.
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
feta9310 said:
Hey I cannot get into download mode, and I´m exactly in the same problem you were. How did you get into download mode? I haven´t used usb JIG since I cannot get one from where i live.
I´ll be really thankful in you help me!:angel:
Click to expand...
Click to collapse
Did you try getting into download mode with the 3-button combo (Volume Down/Power/Home)?
Long story short- I dropped my phone and the screen does not turn on anymore. I would like to sell it as damaged.
BUT before I do, I would like to format the phone via PC.
The phone still detects on the PC and if i right click the device via PC and press "Format" will the phone still be functional? Or will it wipe the entire phone including the OS? making it in a worst state than it is in?
n7105T said:
Long story short- I dropped my phone and the screen does not turn on anymore. I would like to sell it as damaged.
BUT before I do, I would like to format the phone via PC.
The phone still detects on the PC and if i right click the device via PC and press "Format" will the phone still be functional? Or will it wipe the entire phone including the OS? making it in a worst state than it is in?
Click to expand...
Click to collapse
I believe you can use adb to format, or if nothing else, just use odin to take it back to stock
absinthesummer said:
I believe you can use adb to format, or if nothing else, just use odin to take it back to stock
Click to expand...
Click to collapse
What is adb?
Odin will be difficult as I'm unable to see the screen to follow prompts of going to download mode. I tried holding the buttons and then trying to do a factory reset but it seems I'm always doing it wrong.
n7105T said:
Long story short- I dropped my phone and the screen does not turn on anymore. I would like to sell it as damaged.
BUT before I do, I would like to format the phone via PC.
The phone still detects on the PC and if i right click the device via PC and press "Format" will the phone still be functional? Or will it wipe the entire phone including the OS? making it in a worst state than it is in?
Click to expand...
Click to collapse
If you plug the phone in just delete like all the pics and all the folders but leave the android file all the others should delete if not just delete what you can then download a stock firmware anf flash it via odin while the phone is in download mode and everything should be gone or you can look at pics on the recovery and just wipe the phone without the screen on
terpin32 said:
If you plug the phone in just delete like all the pics and all the folders but leave the android file all the others should delete if not just delete what you can then download a stock firmware anf flash it via odin while the phone is in download mode and everything should be gone or you can look at pics on the recovery and just wipe the phone without the screen on
Click to expand...
Click to collapse
It appears my odin has been successful.
However, upon looking at my files via PC. My music, photos etc are still there. Shouldn't this be deleted?
n7105T said:
It appears my odin has been successful.
However, upon looking at my files via PC. My music, photos etc are still there. Shouldn't this be deleted?
Click to expand...
Click to collapse
No That is pretty much just doing a factory reset just wait till the phone boots and go on the pc and just delete the music pics or like I said go look at pic on what recovery you have and manually format them if you can get philz recovery on there I can post pics and you can see where everything is
Also, for future reference, it's easy to get into download mode even if you can't see the screen. Power off (or remove battery), and then hold volume down, home, and power. This will take you directly to download mode. After a couple of minutes (once you're pretty confident you made it into download mode, press volume up once to accept the custom OS prompt. Once you've done that you should see your device on Odin (the Com port will light up).
While you're in download mode, you can also issue certain fastboot commands (on most devices) if you need to... ie fastboot reboot or fastboot reboot recovery or fastboot reboot bootloader. Fastboot flash... etc. This can be extremely handy when you can't access the touchscreen or can't make accurate selections for whatever reason. It can help you get into certain modes you may need to get to so you can use other tools to repair your device or pull files.
Edited to add: changing out the display assembly is super easy to do. If you decide not to sell it, that is.