Hello people, i have a Smartwatch 2 and i was updating the frimware via PC Companion... in the middle of the process (around 30%) my electricity go off and my pc shut down. I guess the frimware of the device simply get destroyed...
Now, the problem is... the Smartwatch 2 dont boot, the screen never turn on.
Because of that PC Companion don't recognize the device.
I Tried Turn it on by pressing the button 10 - 20 and 30 sec... nothing. Tried charging it by a wall charger and press the button, nothing happends.
Can anyone help me? is there any way to flash the frimware without uising PC Companion?, or is any different way to make the PC Companion recognize the device?
Note: When i approach the Smartwatch 2 to my Xperia Z1 NFC, the phone vibrates, sounds and recognize that is there a Smartwatch 2. I Tried turn on the Smartwatch by approaching to the Z1's NFC and pressing the power button but again, nothing happens.
Any Help will be so grateful. I Have expired the warranty time.
Related
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved
I am updating the latest software on my phone using the pc companion and my phone is connected to my computer. But sudddenly my phone shut down on its own and cannot be started up until now..only the light of the phone showed up..what should i do?
syifa said:
I am updating the latest software on my phone using the pc companion and my phone is connected to my computer. But sudddenly my phone shut down on its own and cannot be started up until now..only the light of the phone showed up..what should i do?
Click to expand...
Click to collapse
If at first you don't succeed... Hold the power and vol+ until the Phone vibrates then it should power down, then try again.
XperienceD said:
If at first you don't succeed... Hold the power and vol+ until the Phone vibrates then it should power down, then try again.
Click to expand...
Click to collapse
i have tried that..but it still remain the same..it vibrates and the light showed up but it does not start..the phone also does not power off and i have done what you asked me to do
syifa said:
the phone also does not power off and i have done what you asked me to do
Click to expand...
Click to collapse
Hold the power and vol+ for 3 or 4 seconds, if it doesn't vibrate a few times and power down then you'll need a service centre.
Take the battery out for 1 minute
I have tried to hold the vol for more than 5 seconds but the phone does not vibrate to power off..it can be on only until the light showed up..I'll try taking the battery...
The phone still behave the same..what should i do? i have taken out the battery for 1 minute..
Just put PC Companion/Sony Update Service in repair mode and when asked, connect the phone by holding Volume Down and plugging USB cable...
XperienceD said:
If at first you don't succeed... Hold the power and vol+ until the Phone vibrates then it should power down, then try again.
Click to expand...
Click to collapse
Bro, volume up and power will just boot the phone in fastboot mode (blue LED)...
mbc07 said:
Just put PC Companion/Sony Update Service in repair mode and when asked, connect the phone by holding Volume Down and plugging USB cable...
Click to expand...
Click to collapse
how to put the pc companion in a repair mode?
syifa said:
how to put the pc companion in a repair mode?
Click to expand...
Click to collapse
Without any phone connected, open PC Companion, go to Support Zone and Start Tablet/Phone Update. A small popup will show saying that no phone were detected, and in that popup you'll have an option to repair the phone. Click in "repair my phone/tablet" and follow the instructions...
mbc07 said:
Without any phone connected, open PC Companion, go to Support Zone and Start Tablet/Phone Update. A small popup will show saying that no phone were detected, and in that popup you'll have an option to repair the phone. Click in "repair my phone/tablet" and follow the instructions...
Click to expand...
Click to collapse
There is no pop up..only one pop up saying that the pc is searching if there are any applications..
syifa said:
I am updating the latest software on my phone using the pc companion and my phone is connected to my computer. But sudddenly my phone shut down on its own and cannot be started up until now..only the light of the phone showed up..what should i do?
Click to expand...
Click to collapse
1.Download and install Sony update service a.k.a. SUS
2.Open SUS
3.Choose your mobile from the list.
4.Press and Hold vol down button and connect the usb cable.
5.In Sus click next tocheck for update.
Else
1. Download a. Ftf file as per ur country.
2. Use flashtool to flash.
Sent from my C2004 using Tapatalk
My Phone Can't Power On
What should i do? i have tried took the battery out but it doesn't have any effect..
Hello guys. I just got this Xperia Acro S with the red light when it is connected to the charger. The phone was working all right and then it suddenly went off. When it is connected to the wall charger (Samsung or Sony charger) it gives a red led for a while, depends on how long it was disconnected from the charger and then the led goes off. If I connect to the pc, I get SEMC Flash Device. I tried everything I saw in lots of forums and nothing helped. If I hold the Volume + with power button, I don't get any vibration, no matter how long I hold. The same thing with the Volume - and the same with the Volume + - and the power button together. If I connect to the pc, the red led will come on, then after a while it will go off and only then the pc sees the device as SEMC Flash. I tried to remove the battery and reconnected it, but still no results as well. The flashtool says For 2011 devices line, be sure you are not in MTP mode. SUS doesn't see the phone, but the PC companion behaves strangly. When it says connect the phone, I plug it in and then the Pc companion says: Please update Pc companion. When I check for latest version it tells me that is the latest one. It can't be an old version, because I just downloaded it from the sony website. If I launch the repair services, it says press volume down and connect usb. I did that but the phone keeps entering into SEMC Flash mode. Please help me out
Hi there,
I tried to re-flash my smartwatch 3 using Sony Companion and after the success message shown on the PC screen, my watch never switch back again.
when I press its button for long time it just vibrate, sometime my PC detect it when I connect the smartwatch 3 as unknown device.
I tried to redo the flash process again, but PC Companion never detect it anymore.
Any ideas Gurus?
Thanks,
yassermekled said:
Hi there,
I tried to re-flash my smartwatch 3 using Sony Companion and after the success message shown on the PC screen, my watch never switch back again.
when I press its button for long time it just vibrate, sometime my PC detect it when I connect the smartwatch 3 as unknown device.
I tried to redo the flash process again, but PC Companion never detect it anymore.
Any ideas Gurus?
Thanks,
Click to expand...
Click to collapse
i had some problems with PC companion too..
what i did was " restart " smartwatch .. and in the end it did boot up ! try to upload again the firmware.. !!
I just left it overnight with charger connected, and on morning viola it's working again.
By the way, it looks like it takes ages until software updates finish and boot again in normal mode.
The title says it all . i want to repair my smartwatch 3 but Sony pc companion doesn;t recognise my watch . what is the solution . Thanks
You need to disconnect the watch, shut it down, and hold the power button until you see the connect to pc animation. Then, go into pc companion and click on the repair panel. It should allow you to download a new update.
Pc panel does not recognize the watch as a normal device.