Recently I started getting "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" whenever I reboot or boot to recovery. Searched on google and xda as well, but whoever had this problem, their phone never booted. But my phone boots fine when I press and hold the power button and working fine as well . Currently I am on DN4 but I had this problem on other ROMS as well. Is it going to be a problem? Do I need to do something?
Nobody has the answer?
???
Since you are on a Custom ROM, you can safely ignore the issue.
What happens is Samsung checks your Device for the Firmware version that has been loaded on to it. And Samsung already has the hardware details with it (since it manufactured that device) which you show it to be a Note 2.
However you have modified it to be a Note 4.
So Samsung gets confused because this is also a Samsung firmware running on a Samsung device and it is not the proper version. Therefore your software throws this error.
If it was a Note 2 with stock firmware, then you would not face this error else you will always get an error while trying to check for updates with a ROM other than the stock ROM.
Ravi.
-----------------------------------------
If you found my post helpful, please hit the Thanks / Thumbs Up Button.
Yeah I got that but I was getting this error even on older versions. And like I said, whoever had this problem had a soft brick. Anyways thanks. As long as it works, its fine.
Yes,
But you always know how to recover from a soft brick
But I don't think you will get softbricked. Its just some messed up service gone haywire. You can greenify / remove it 8f you identify the culprit.
Cheers,
Ravi.
-----------------------------
If you liked my post, please hit the thanks / thumbs up button.
Related
So, at the risk of posting too much info (instead of not enough) I'm going to start at the beginning:
I rooted my wife's S3 and loaded TWRP and Paranoid Android. It ran fine, but there was a camera issue, so she wanted me to restore it to the stock ROM. I did this (to 4.1, I believe, whatever was out in August). Again, it ran fine and I was planning to restore the root access, but did not.
Later, it was dropped in Hibachi sauce (not sure this is relevant, but in case) and we put it immediately in rice. It worked fine, other than the touch screen intermittently ceasing to receive touch commands.
When the updated ROM came from Samsung, my wife installed the update and the phone continued to work fine, other than the screen issue.
She was tired of the issue and decided to sell it to buy an iPhone (shudder) so she did a factory reset. This is where the issues began (I included the previous steps as I'm not sure which may have caused the current issue).
Upon the factory reset, the phone would only boot to the beginning of the AT&T logo loading. I thought it may be something she could fix through Kies and suggested she try that, so she did. The phone would then boot to a screen in Odin mode that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." We did this and there was no help.
I can get it to boot into recovery (the default one now) and have tried to reflash that and the stock ROM that I did previously and only can get two actions: either the freeze at the AT&T logo (if I use Odin to flash the ROM) or the above message in Odin mode (after trying to fix from Kies).
I'm not sure what to do at this point and would appreciate any and all help you guys can provide. I've lurked around and learned quite a bit to flash my ROM and my wife's from you guys, so I'm really hoping I can learn more from this.
Thanks in advance!
Fearborn said:
So, at the risk of posting too much info (instead of not enough) I'm going to start at the beginning:
I rooted my wife's S3 and loaded TWRP and Paranoid Android. It ran fine, but there was a camera issue, so she wanted me to restore it to the stock ROM. I did this (to 4.1, I believe, whatever was out in August). Again, it ran fine and I was planning to restore the root access, but did not.
Later, it was dropped in Hibachi sauce (not sure this is relevant, but in case) and we put it immediately in rice. It worked fine, other than the touch screen intermittently ceasing to receive touch commands.
When the updated ROM came from Samsung, my wife installed the update and the phone continued to work fine, other than the screen issue.
She was tired of the issue and decided to sell it to buy an iPhone (shudder) so she did a factory reset. This is where the issues began (I included the previous steps as I'm not sure which may have caused the current issue).
Upon the factory reset, the phone would only boot to the beginning of the AT&T logo loading. I thought it may be something she could fix through Kies and suggested she try that, so she did. The phone would then boot to a screen in Odin mode that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." We did this and there was no help.
I can get it to boot into recovery (the default one now) and have tried to reflash that and the stock ROM that I did previously and only can get two actions: either the freeze at the AT&T logo (if I use Odin to flash the ROM) or the above message in Odin mode (after trying to fix from Kies).
I'm not sure what to do at this point and would appreciate any and all help you guys can provide. I've lurked around and learned quite a bit to flash my ROM and my wife's from you guys, so I'm really hoping I can learn more from this.
Thanks in advance!
Click to expand...
Click to collapse
So is it stuck on the AT&T Logo? Or Samsung Logo?
UnknownTroll1 said:
So is it stuck on the AT&T Logo? Or Samsung Logo?
Click to expand...
Click to collapse
It was the AT&T logo, it's currently the Odin. If I flash it again with the stock ROM, it'll be the AT&T logo again, but it doesn't completely load the AT&T logo. The Samsung one loads and then the AT&T starts to load, but doesn't finish playing.
Anyone?
Yes, Odin to stock unrooted, then go ahead and factory reset by holding volume up + home button on first boot. Done.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jblparisi said:
Yes, Odin to stock unrooted, then go ahead and factory reset by holding volume up + home button on first boot. Done.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If this works (I'll try it when I get home) I will be so grateful! BTW, do you happen to have a decent link to a stock ROM? If not, I'll Google it tonight.
Hello guys
I just want to say i'm no where near an expert on this, and i feel i have tried to fix this issue but made it way worse in the process so please be gentle.
This morning i woke to my Samsung Note 2 N7100 just hanging on the samsung start up screen. Tried all the normal things, taking bat out, restarting many times etc. No luck, just kept hitting the samsung screen and freezing.
After some goggling i found my way to the Recovery screen (power+vol up+home) but when it was loading there was a lot of Red Error messages. It loaded the options screen and i tried to do a factory reset. A lot more error messages to basically then say failed. Tired it a few times and even tried to clear the cache but kept failing.
So i tried loading it into Kies, which didn't connect to the phone so i couldn't reinstall the software.
So i decided maybe i need to flash the phone. I downloaded a stock Rom for the phone (i was on Kitkat so found that version) Used odin and half way through the install it came up failed.
Since then the phone only displays the "Fireware upgrade encountered an issue. Please select recovery mode in Kies"
So i went back to Kies but still couldn't find the phone. It also won't let me go back into recovery mode, only into download mode.
I thought maybe i'd give the flashing another go but this time when i flashed it, it just hangs trying to find Pit but eventually fails saying no Pit.
From research it appears that the partition is buggered. All the research i've done seems to say stay away from messing with the partition. some people say its Emmc thats gone and its game over but others say there is hope still.
I can still access the Download menu and the product name is still GTn7100, Binary still samsung official so i am holding out hope there is some life left in it. I'm on my last legs now so open to all offers for solutions. Please assist if you can
Thank you in advance
Andy
If you're able to get in download mode.. Maybe try flashing a custom recovery (TWRP) which you could try full format in it then install a ROM using it.. Also, maybe trying to use a CM based one? Though you might need a external SD card to move files from PC to your phone.
I don't know if this would work, but try it.
Sent from my Galaxy Note II using Tapatalk
Hello there, all xda members.
I got Ace 2 to fix from my friend. He doesnt know exactly why did the phone becoming stuck on bootlogo. Maybe messing up with flashing GB or JB. or maybe wrong terminal command.
Ace 2 Condition :
- Its unable to pass boot logo samsung galaxy ace 2
- Its unable to enter recovery mode
- Its able to enter download mode, and its custom binary download : No, Current binary : Samsung official
Here all the thing that i have tried to fix the phone :
1. Flashing the phone with Russian Gingerbread with 3 files, Pit, CSC, and PDA. But it still stuck on bootlogo and unable to enter stock recovery. it shows succeed though on Odin, but it can't boot.
2. Flashing the phone with Latest Jelly bean, with Jelly bean pit file. Odin displaying succeed, but it doesnt boot either.
Can someone help me how to solve this problem?
Is there a condition where phone completely unable to recover from hardbrick such as stuck on bootlogo, but still able to enter download mode?
I'm going to download jelly bean mb2 or mb4 which include pit and csc from jelly bean and try to reflash it. Hope it gonna work.
Thanks for any help.
Anyone here to help me?
@ChronoMonochrome , maybe you've experienced something like this and able to resolve the problem.
The phone can't boot at all. and im a little frustrated here. I've already tried a 3 parted firmware MB4, and it doesnt work either. Tried to flash chrono 4.3 cwm through odin and it doesnt work either.
And if it really doesnt have a solution, maybe i'll just give it up. And doesnt continue researching to fix this phone. Thanks
maybe another devs that able to fix this. @ace2nutzer @fluffi444 or anyone??
It got the same case. Successfull flashing, but still doesnt boot, it just like flashing is fail. or it just like it reverted the way it was before flashing. Your help is very appreciated.
riyosakura said:
maybe another devs that able to fix this. @ace2nutzer @fluffi444 or anyone??
Click to expand...
Click to collapse
Very strange. And more strange is that several people have this "only boot to logo / only downloadmode issue"
Up to now I have no Idea - I asume that ADB is not working, because of missing recovery mode? With ADB there are plenty of possibilities.
An complete Factory reset could be helpfull - But how to do it out of downloadmode ?! Don't know.
Up to now I didn't had a Phone with this behaviour for repair at home. If it would be reproducible how this all happens, I would bring my phone to this state to find out how to repair it (riff box here - so dead ACE 2 is not a problem) - But even this is unclear - Every report regarding this said only "suddenly" "without any reason" "flashed this or that" - But no exact infomation what happend acctually.
I'm out of Ideas. Sorry!
Thanks for answering.
I dont know if i have to give up already or not. But i'll try to flash it with another pc and data cable. Maybe it gonna work.
riyosakura said:
Thanks for answering.
I dont know if i have to give up already or not. But i'll try to flash it with another pc and data cable. Maybe it gonna work.
Click to expand...
Click to collapse
Another try:
Flash with ODIN Ace2Nutzers Stock Kernel (search on FTP)
Do not let the Phone boot
After Flashing pull usb und press drictly the 3 keys to get into Rec. Mode
riyosakura said:
Anyone here to help me?
@ChronoMonochrome , maybe you've experienced something like this and able to resolve the problem.
The phone can't boot at all. and im a little frustrated here. I've already tried a 3 parted firmware MB4, and it doesnt work either. Tried to flash chrono 4.3 cwm through odin and it doesnt work either.
Click to expand...
Click to collapse
No, I haven't had the phone in such condition as described above. But I have heard that any odin-flashable file that's wrongly flashed via "Phone" entry can lead brick which is similar to this. I remember only one case - one user from 4pda has flashed some file via odin, wrongly putting file to the "phone", and wasn't able to restore it anyhow - but he also had some brick on GPIO side - vol.up worked like vol.down, and the real vol.down didn't work at all. I don't know however, what memory partitions / any devices capable of storing data would be messed after this operation, and whether it's reparable at all. I mentioned devices, that can also store data, I know only that touchscreen has small memory for its firmware(that what I had broke one day in the past after accidental firmware change in the kernel) - but maybe some other devices also has it?!
There are also some chances that it's dead flash memory - chances are pretty small, but should also be taken into account.
Hi,
a friend of mine had an issue with his Gnote 3 Neo (N7505XEF). Restart again and again and again.
I saw it and I said that I was able to fix it.
Went to recovery, wipe data/cache.
Reboot, and phone starts an update of sytem.
Before the end, bootloop on "galaxy note 3 lite" screen. Noway to have "samsung" bootanimation.
I ask him if he had installed an app recently. No for 4/5 days, and no issue since.
An OTA came sometimes ago and no issue with it.
So, I took his phone and expect to flash a stock firmware with odin. That what I've done with latest french firmware (5.1.1)
Reboot and.... bootloop
Sometimes, bootanimation "samsung" appears but doesn't go to the end of process, and restart the phone in "galaxy note 3 lite".
I wiped everything, test some others firmwares from 4.4.2 to 5.1.1.
I can always enter recovery and download mode, but the issue is usually the same, bootanimation doesn't finish.
I search everywhere but found nothing.
I remember with my old Gnote 2 that I had to install stock recovery once to solve a starting problem, but here, I can enter recovery, so I don't think that it is the same error.
Perhaps a kernel issue? I don't know, and I can't find them on the web!!
The phone has always been full stock, with no tweaks (root, custom recovery or rom....) The issue arrives without any signs. Hardware problem? Perhaps, but never been drown or wet....
What do you think I can do to solve this? Cause at the moment, I don't see haw I can!!
Thanks for all.
Yoh from France.
Excuse my bad english.
Keep trying and making a factory reset could help after installing a new rom. But I can't see more things.
Excuse my english, I'm french
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Hyldran0 said:
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Click to expand...
Click to collapse
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
xdausernl said:
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
Click to expand...
Click to collapse
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Hyldran0 said:
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Click to expand...
Click to collapse
It is quite easy to turn the device off, for that to happen you have to press and hold the on/off button. You'll see that the device will shutdown and try to reboot and then finally shuts down again and stay off, then release the on/off button.
Are you sure trying to flash the correct firmware with correct changes, etc??
Please share with us the device and Android version, as well as the stock ROM version with changes you're trying to flash.
Put (copy and paste) the output of Odin below.
Another way to get the firmware flashed is by using Heimdall, but for that to happen you first need to rename the extension of the stock ROM (remove .md5 and leave .tar) and than extract all seperate pieces that are contained within the stock ROM.
All those extracted pieces from the stock ROM you have to upload seperately onto Heimdall and try to flash them to your tablet, one by one.
Heimdall you'll find 'here' or use FWUL instead which has Heimdall pre installed, download is to be found 'here' and install it on a USB medium a stick, to put FWUL onto USB, use Balena-Etcher and the download is to be found 'here'.
Micro USB cable does work, but if you're unsure, try another one and make sure using the correct drivers too.
Using Odin, make sure the tablet is recognised and 'connected' in Odin, also make sure 'repartitioning' is unchecked.
If you've used the wrong Odin version, flashing will fail!
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Hyldran0 said:
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Click to expand...
Click to collapse
You're welcome.
Hi, complete novice here, does anyone know where I can get a working Firmware for my Tab 3 v7 (SM-210)?
I have searched through various forum articles here, and tried to install with several builds but none will install. The only one that gets anywhere near is the JASBR build by gr8nole. It appears to install, but on restart, the TAB just sits on the "Samsung Tab3" start screen.
I read that I may need to flash the firmware 4.4.4 (Kit Kat), but can't find it!
The unit is not totally bricked (yet), as I can run TWRP 2.8, with which I created a backup of the original build, but when I try to restore the backup, it fails at just over 31%.
Can anyone help please?