I've been on nightly CM10.1's forever, but recently decided to try the unofficial CM-10.2, specifically the 8/3 update. I actually had the original release for a while as well and it was fine. However, as soon as I installed the 8/3 release, my phone started acting up. First of all, I lost root. Second, my Gmail app disappeared. Then, Google Play would open, but never connect to the internet (constant "Retry" button on the screen). So I decided to try the S3 Toolkit to reroot. No luck. ADB could see my phone, but the toolkit would stay waiting for USB debugging to be enabled and not go past that. I read somewhere this is because of a new security feature in 4.2.2. At that point, I figured I'd ODIN back to stock and start over.
I got ODIN 3.07 and the stock AT&T DLK3 ROM. I made sure only Auto-Boot is enabled and I only adding the ROM tar.md5 file through the PDA button. The process takes a few minutes and completes successfully (PASS, 1 successful/0 failed), but when the phone comes up, I get the Galaxy S III logo, then the AT&T splash screen and chime, but it never goes past the blinking SAMSUNG logo. And by never I mean I've even left it overnight and it's in the same place in the morning.
I've tried flashing more than once. I even tried another ROM I got from another thread I can't find right now, all with the same result.
Anything else I can try at this point? The phone is definitely not bricked, since it's on, updates, etc.
Thank you.
Manually boot into recovery, do a factory reset
mrhaley30705 said:
Manually boot into recovery, do a factory reset
Click to expand...
Click to collapse
What would I do without this forum and experts like you?
That did it. 1000 thanks!
I have been using the i747z ROMs for quite some time and after trying a bunch of other ROMs I always reverted back to theirs. So when their 3.0 version came out with Android 4.3 I installed it, using ClockWorkMod recovery. Right after it installed, CWM displayed a message about the boot loader and to fix it. So I went ahead and did that (Don't really remember what the message was) What I know is that I lost root. Also the phone could not connect to the mobile network, only on Wifi. So this morning, I factory reset the phone again, and attempted to root the phone with Odin with CF-Auto-Root-d2att-d2uc-samsungsghi747 (which I had used when I first rooted the phone). Now the phone doesn't boot past the 2nd samsung logo, it starts out with the Samsung logo with the blue circle around it, then the AT&T Rethink Possible and then the plain white Samsung logo. Also, the LED has a slow blue flicker.
I can get the phone into download mode and I have used Odin to attempt to load the stock firmware and the stock bootloader. But after restarting the phone I can't get past the same screen described above.
I am pretty sure this is not related to the i747z v3.0 ROM but rather something a miss with the order in which things need to start in Android. I have done some reading on that but I am not sure what I need to do to correct this soft brick situation. ( I have googled "soft brick" as well)
Any thoughts would be greatly appreciated!
mozphoto said:
I have been using the i747z ROMs for quite some time and after trying a bunch of other ROMs I always reverted back to theirs. So when their 3.0 version came out with Android 4.3 I installed it, using ClockWorkMod recovery. Right after it installed, CWM displayed a message about the boot loader and to fix it. So I went ahead and did that (Don't really remember what the message was) What I know is that I lost root. Also the phone could not connect to the mobile network, only on Wifi. So this morning, I factory reset the phone again, and attempted to root the phone with Odin with CF-Auto-Root-d2att-d2uc-samsungsghi747 (which I had used when I first rooted the phone). Now the phone doesn't boot past the 2nd samsung logo, it starts out with the Samsung logo with the blue circle around it, then the AT&T Rethink Possible and then the plain white Samsung logo. Also, the LED has a slow blue flicker.
I can get the phone into download mode and I have used Odin to attempt to load the stock firmware and the stock bootloader. But after restarting the phone I can't get past the same screen described above.
I am pretty sure this is not related to the i747z v3.0 ROM but rather something a miss with the order in which things need to start in Android. I have done some reading on that but I am not sure what I need to do to correct this soft brick situation. ( I have googled "soft brick" as well)
Any thoughts would be greatly appreciated!
Click to expand...
Click to collapse
After flashing through odin did you format data?If not try it.
Go into recovery and wipe data.
**SOLVED**
Thanks xXFl4sh, I had tried that.
Solved!
Alright where do I start? How about RTFM Some how I had missed the part about flashing a bootloader and a modem after the ROM. Not recalling having to do that before, I skipped right over it. Once the recovery CWM 6.0.3.1 was finally loaded, getting the flashing the ROM, the bootloader and the modem was easy as usual.
The key was having to use Odin to install a recovery in .tar or .tar.md5 format since I could not access a Recovery Mode on the GS3, as well as a rooted stock image (I used root66_ATT_I747UCDLK3.tar.md5 which is a rooted Android 4.1.1 for AT&T) For the recovery, I couldnt' find a .tar or .tar.md5 for ClockWorkMod (did find a utility to convert it, but didn't want to introduce another variable into the mix) so I used one from Team Win Recovery (v2.6.3.0) and with that I loaded the CWM recovery. Once all of that was in place, I proceed to factory reset, clear data, cache, system and then flash the new ROM, bootloader and modem.
In all of this I learned quite a bit about the whole process and how to narrow down possible resolutions. I still see the "Rom may flash stock recovery on boot" message after flashing either a ROM, bootloader or modem, but just backing out without answering Yes or No seems to work. Also (and this may be related, I don't see the option to restart in recovery from shutdown menu). Don't really know what that's all about for now, and honestly don't want to mess around (at least for a while)
I know the steps are general, but I hope this can help some else if they get their devices in a soft brick situation. As for the i747z v3 ROM with 4.3, I really like it, everything works (Wifi,Blutooth,tethering) and the battery seems good as well.
Thanks!
Hi all. I'm in a real pickle here and hoping someone can tell me how to get out of this mess. It's a bit of a long story, but I'll summarise as best I can.
I've had my Galaxy Note 2 LTE (N7105) for a year and I rooted it pretty much the day after I got it. I'm not new to rooting at all (fourth Android device since 2010, all rooted), but I still feel like a noob at times. Over this 2014 Easter period I had time off so I decided to change ROMs.
I was previously using CM 11, which I had been using pretty much since I rooted. And I had updated CM at least once a month, sometimes more frequently. So I was looking for some new ROMs, downloaded about 5 and tried them out. The last two I tried was OmniROM (a 4.4.2 ROM) and CM 11 Remix (also a 4.4.2 ROM). I was using TWRP 2.7.0.2 to do the wipes, caches, flashes, etc. I had no issues flashing OmniROM, but when I flashed CM 11 Remix, I couldn't get in the first time. I was stuck in a boot loop. I pulled the battery, got back into recovery and tried flashing again. Still boot looping. I think the mistake I made was a Data Format. Either way, I finally got CM 11 Remix to load by first wiping, flashing the ROM, GApps, a sensor fix, a camera fix, Devil Kernel and then Super SU. However once in the ROM I was getting constant Google Play Store / Services FCs. Oh, and yes, I went through the typical brand new Android setups, entering my Google account and so on... I found that if I cleared data / caches on both Google Play Store app and Google Play Services app, it gave me temporary joy but as soon as I tried to download any app in Google Play I'd get the FC. Also, my signal was totally gone. I tried flashing back to OmniROM as it was my last known good and working ROM, but now that was boot looping. I even tried some of the other ROMs from that bunch I had, including AOKP. All would boot loop.
So after much trying different GApp packages, I decided to best thing to do would be restore it to stock, root again, then go for the custom ROM (hopefully CM 11 Remix) from a nice clean slate. So I did this. I downloaded the Android 4.3 stock ROM from SamMobile here. Installed Odin 3.07, then loaded it up and flashed the stock ROM. All seemed to go great, but when the ROM was done and phone rebooted, I get stuck in another boot loop! This time at the white "Samsung" logo with the glowing blue edges. Not the model number screen. Also my LED light is on blue, if that means anything.
So I found this thread (post at top of page) which suggests I need to flash the PIT file during the stock ROM installation with Odin. So I found the PIT file here, and I'm ready to flash this along with the stock ROM... HOWEVER, I read something somewhere (can't find it now) that implied if I'm on Android 4.3, flashing a PIT is a bad move. Can anyone comment on that? I guessing since the stock ROM is 4.3, I'm technically on 4.3 (even though I can't get into it).
Or if anything else I'm doing immediately stands out as a seriously stupid move, please let me know. I've been without normal use of my phone for a couple days now and ironically I'm at the point where I'm considering going without a phone for the rest of my life... LOL! AS IF I COULD!
Anyways, any help will be much appreciated!
EDIT: I just realised I should have posted in Troubleshooting, not General Questions... If mods want to move this, please do.
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
edan1979 said:
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
Click to expand...
Click to collapse
I don't have any working ROM. All I have now is a boot loop.
invertedskull said:
I don't have any working ROM. All I have now is a boot loop.
Click to expand...
Click to collapse
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Banutu said:
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Click to expand...
Click to collapse
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
invertedskull said:
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
Click to expand...
Click to collapse
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Banutu said:
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Click to expand...
Click to collapse
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
invertedskull said:
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
Click to expand...
Click to collapse
I'm glad to hear that man, peace ^^
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
invertedskull said:
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
Click to expand...
Click to collapse
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Banutu said:
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Click to expand...
Click to collapse
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
invertedskull said:
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
Click to expand...
Click to collapse
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Banutu said:
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Hmmm, I haven't seen that one... Feel free to PM me a link.
Help Me!
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
If you have access to anything, and don't get JUST the boot loop, then you DO NOT have the same case I was in. You are probably able to recover from this. Try posting on the Tf Forums. The guys over there are "specialists" in Asus Tf tablets, and as you'll see on this thread (http://www.transformerforums.com/fo...-boot-loop-after-doing-routine-cm-update.html), they gave me a lot of help. Not that I was able to recover, but they were awesome dudes.
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
mroldman281, You didn't post again, so I don't know, If You found solution, but since I had same simptoms, and after four days of reinstalling different stock roms, wiping and even messing with PIT via Odin etc..I can say, that in my case the reason for boot loop was faulty battery. The phone worked when it was plugged in and restarted soon after i unplugged USB cable, and just lopped afterwards. Replacement battery put everything back in order. And I am one happy Camper!
Hope this info helps someone else with boot loop problem
same problem stuck in bootloop
hey guys i have the same problem bootloop all the time i tryied stock firmware but nothing happend avec i rooted my note 2 and intalled a costom recovery and a many roms but stuck in bootloop i didn't chage baterry , by the way i wiped cache and reset factory and clear dalvick cache but the same always bootloop
what u suggest i do
ps : i can acces to bootloader or download mode it charge normally
woow get back my note 2 lte alone
hey guys i get back my note 2 i don't know how but it was a succes :victory:
first : i tried so many afficial firmware 4.4.2 and costom roms but didn't change the problem of bootloop
then i remembred what version i was in it was 4.1.1 so i download it from sammobiles thenks to them flash it and boooom the note 2 lte start like a charm
i want to thanks everyone for their help even if they didn't help directly but this past 3 days i read almost all the threads about note 2
well i thinks one of the selutions here is to revert back the the original stock firmware like i did so maybe will fix the bootloop
I purchased two note 3's. The black one boots up fine on 4.4.2 just fine, but the white one however out of the box
experienced serious rebooting issue that almost made it impossible to root and attempt to tweak. Both these phones were factory sealed in the box. I was eventually able to get white note 3 rooted. I unlocked using chainfires region unlock.apk, and sure enough that unlocked the phone
domestically for use on At&t's network. However, when I attempted to flash back to Jelly Bean modem the phone accepted modem, but still had reboot issue. I tried to install HyperDrive Rom, and even that couldn't fix reboot issue. I turned OFF wifi scanning, and all of the other tricks that have helped people, but this phone continues to reboot about 30 seconds to 1 minute into main screen boot. Any IDEAS??
I am open to trying a myriad of ideas to fix this, I really need to get fixed to sell ASAP. Thanks for your help!
Neither of these phones can be sent back to Samsung. Need to fix myself
Thanks:good:
twill1987 said:
I purchased two note 3's. The black one boots up fine on 4.4.2 just fine, but the white one however out of the box
experienced serious rebooting issue that almost made it impossible to root and attempt to tweak. Both these phones were factory sealed in the box. I was eventually able to get white note 3 rooted. I unlocked using chainfires region unlock.apk, and sure enough that unlocked the phone
domestically for use on At&t's network. However, when I attempted to flash back to Jelly Bean modem the phone accepted modem, but still had reboot issue. I tried to install HyperDrive Rom, and even that couldn't fix reboot issue. I turned OFF wifi scanning, and all of the other tricks that have helped people, but this phone continues to reboot about 30 seconds to 1 minute into main screen boot. Any IDEAS??
I am open to trying a myriad of ideas to fix this, I really need to get fixed to sell ASAP. Thanks for your help!
Neither of these phones can be sent back to Samsung. Need to fix myself
Thanks:good:
Click to expand...
Click to collapse
So u have a recovery on the device? If so, try this zip out.. https://www.dropbox.com/s/okx7op92cirn3l1/Brick_Loop_FIX_afterRestoringBackup.zip
Have you reset it from the menu or have you full restored to stock
mrej201 said:
Have you reset it from the menu or have you full restored to stock
Click to expand...
Click to collapse
Thanks for your help guys. Yes, I have performed a factory reset. Flashed stock firmware in Odin and Heimdall, flashed JB modem. Rooted, flashed Hyperdrive Rom, turned wifi scanning to off, and seriously tried every trick in the book. Perhaps try another rom on JB? I've heard some Note 3's have a Kitkat issue. Someone suggested hardware could be faulty but that doesn't add up since the phone doesn't reboot in download or recovery mode..
hi,
so i just got my s6 edge for sprint shipped to me (it wasn't activated to any service when i got it). here is the order of events i took:
1) tried to activate my service, but there was a delay in porting the #
2) while waiting for them to port it, i rooted it, installed twrp and a rom (this was when it was on 5.0.2)
3) they called and said they were ready to port, but the new rom didn't have the activation software in it. so i stalled them and said i would call back. i then reverted back to stock using odin.
4) got the number ported and was fine using the phone at that point.
5) this is where the day turned bad...... i didn't realize that coincidentally today, a new firmware was released to 5.1.1 and the phone auto-updated to it while i wasn't looking
6) i went to go re-root it using the same 5.02 root and now my phone is stuck. it's sitting on the "Samsung Galaxy S6 Edge, Powered by Android" screen and in the top left in red it says "RECOVERY IS NOT SEANDROID ENFORCING"
7) i tried to restore it back to the stock using odin, but it errored in the download mode (i don't remember the error off hand)
i can get into download mode, and that's about it. i had to let the phone's battery die on it's own to turn it off (this phone gets super hot, btw)
so i guess what i need to know is how to restore back to factory default again, now that it thinks it's on 5.1.1. is there any hope?
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
bbacon said:
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
Click to expand...
Click to collapse
check this post, download the tar and flash it in odin. it worked for my phone!
http://forum.xda-developers.com/showpost.php?p=61650724&postcount=142
it got me into a recovery image that worked and i was able to factory reset in there. my phone is booting properly now. (after it reboots when done, it took a bit on the first title screen to do anything, just be patient)
Thanks man, that worked great. Although I found out in the process of trying to fix it the past few days, I must have flashed a non-compatible kernel because once it boots the touch screen is unresponsive. I guess I'll have to wait until the firmware download is available after all. Thanks again for the help though