Since I ported my number into Google Voice, I have been using Hangouts Dialer as my go-to voice service on my S3. My calls will usually connect after a 3-5 second pause. I can then hear the other person crystal clear, but they can only hear my voice garbled and extremely low volume. It doesn't matter if I'm on WiFi or mobile data. It doesn't matter if I make the call or receive the call. I am currently using PAC-man ROM 4.4.4.RC-3. Does anyone else have this issue or know how to solve it? Is there anyone who has been using Hangouts Dialer regularly that does not have this issue that can maybe help? Thank you!
OK, so after further testing I have discovered that Hangouts is using the wrong microphone for audio. It seems to be using the speakerphone microphone (at the top of the phone) instead of the handset microphone at the bottom. Is there any way to switch the microphone that is being used for just this application?
Related
Have this annoying problem that when I when I make a voice call the person on the other side hears my voice but I can't hear theirs. When this happens I also can't hear the dial tone before the one way conversation starts. 1 out of 4/5 calls this happens
Does anyone experience the same problem?
Sent from my GT-N7100 using xda app-developers app
fixed
lupus83 said:
Have this annoying problem that when I when I make a voice call the person on the other side hears my voice but I can't hear theirs. When this happens I also can't hear the dial tone before the one way conversation starts. 1 out of 4/5 calls this happens
Does anyone experience the same problem?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
hi i have been having this problem on various 4.2 and 4.3 aosp roms. after a lot of trial and error i found that the in call sound worked if some sound was played before dialing or receiving for the first time. it could be touch pad sound or unlock sound or dial pad sound. as i dont enable any of these i used tasker to play a short sound immediately after every boot and the in call sound has become consistent after using this method
hope this helps
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
jfd3220 said:
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
Click to expand...
Click to collapse
Same issue here. every sip I throw it in failed. Vonage mobile also failed. The only voip apps that I know works is grooveip.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have gotten it to work and use it pretty extensively. I use csipsimple with pbxes.org but I don't use their gateway because I have had the problems you have described with them. Instead I use simontelephonics gateway with pbxes.org. My sets up is kinda complicated though because I have two lines and two gateways that I'm useing
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
What ROM are you using? I'm using the CM 10.1 nightly from a few days ago. I've tried PBXes.org and I get the same issue. When I try to make an outgoing call it unregisters and then registers again a few seconds later but the call is never made.
jfd3220 said:
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
Click to expand...
Click to collapse
3cx phone works.. Sure wish csipsimple was working though
jfd3220 said:
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
Click to expand...
Click to collapse
I do a lot of VOIP work and it almost sounds like you don't have the ports open to your phone box. If you're on asterisk TCP/UDP 5060-5080 and UDP 10001-20000 to get audio to work. Just a stab into the dark.
Just found one that works with CM10.1 (I'm on 06/02/2013nightly), MizuDroid. Works great so far and has tons of options!
djxs said:
Just found one that works with CM10.1 (I'm on 06/02/2013nightly), MizuDroid. Works great so far and has tons of options!
Click to expand...
Click to collapse
Nice find! Seems to be working for me too!
jfd3220 said:
Nice find! Seems to be working for me too!
Click to expand...
Click to collapse
As you might already know, you have to change some Sound settings first, especially if you want calls through the ear piece. I believe this is why the built-in SIP client in CM10.1 doesn't work, it's using the wrong audio inputs/outputs.
The Audio recorder should be set to use the mic, not default or auto guess (Voice call, Voice downlink, Voice uplink, Voice communication don't work either). The Audio player to use System sounds (only option that routes the call through the ear piece). Speakerphone player is set to Music playback, and Speakerphone output to Speaker Forced, although Speaker works also.
Groove IP works.
Csipsimple doesnt.
djxs said:
As you might already know, you have to change some Sound settings first, especially if you want calls through the ear piece. I believe this is why the built-in SIP client in CM10.1 doesn't work, it's using the wrong audio inputs/outputs.
The Audio recorder should be set to use the mic, not default or auto guess (Voice call, Voice downlink, Voice uplink, Voice communication don't work either). The Audio player to use System sounds (only option that routes the call through the ear piece). Speakerphone player is set to Music playback, and Speakerphone output to Speaker Forced, although Speaker works also.
Click to expand...
Click to collapse
Your tips proven to be right. the only sip client can be configured like that is mizudroid. Finally I jump into 4.2.2 boat. Thanks.
Sent from my SGH-T989 using xda premium
I got csipsimple to work by changing the following option:
Settings (Expert) > Media > Audio Troubleshooting > Audio Implementation > change from OpenSL-ES to Java
Apparently CM10's OpenSL-ES doesn't work.
tsuda said:
I got csipsimple to work by changing the following option:
Settings (Expert) > Media > Audio Troubleshooting > Audio Implementation > change from OpenSL-ES to Java
Apparently CM10's OpenSL-ES doesn't work.
Click to expand...
Click to collapse
Another great tips! I am using the latest nightly version on 4.2.2. Sip call seems to be working great
Sent from my SGH-T989 using xda premium
hangouts dialer problems mic not working end call speaker not working
Hi,
I have a couple android phones and hangouts dialer works just fine on my rooted htc evo 3d. The galaxy s3 sprint phone has problems with hangouts dialer that maybe some one can help me with.
The microphone is not working again. Last time I did an update it stopped working so I uninstalled and reinstalled and it started working again. Today it will not work again and I tried reinstalling the app but it did not work.
The speakerphone and end call button will not work on the galaxy s3 sprint phone. when I select these items it takes me back to the main dialer page showing an ongoing call. I can not hang up and I have to shutdown the phone to end call. If I have bluetooth connected these end call and speakerphone buttons will work though.
Does anyone know what the problem is with the galaxy s3 on hangouts dialer? Maybe I should just stick to HTC phones for now on?
Same problem here. Only fix so far is using a Touchwiz ROM. Lame. Hopefully someone fixes this. Stay vocal and talk to the devs. Ive been trying to sort this out all month. No one is of much help, honestly.
STAY VOCAL.
totbl said:
Same problem here. Only fix so far is using a Touchwiz ROM. Lame. Hopefully someone fixes this. Stay vocal and talk to the devs. Ive been trying to sort this out all month. No one is of much help, honestly.
STAY VOCAL.
Click to expand...
Click to collapse
I have the same problem. No one can hear me when I call them on google hangouts with out bluetooth. If I used a wired headset they still cant hear me. They can only hear me if I use bluetooth
customromlover said:
I have the same problem. No one can hear me when I call them on google hangouts with out bluetooth. If I used a wired headset they still cant hear me. They can only hear me if I use bluetooth
Click to expand...
Click to collapse
on the latest CM11 and 12.1 (unsupported) I found that it activates the microphone on the TOP of the phone, rather than at the bottom. Not sure how to swap it around. Had to go back to stock
We finally have our watches updated with the long waited 1.4 internal speaker enable firmware.
I was so excited to side-load the update to my watch and seeing the new features activated, but with more usage to the watch/phone (note5) I started getting frustrated.
Phone calls cannot be received (heard or voice out) from phone if bluetooth (Play phone audio on watch) is selected. (unlike my previous iWatch)
2nd flaw is the strange behaviour using Facebook messenger calling when audio is diverted to watch, but this time the calls fail.
I thought i would see if its only me facing this, is it the combination of my phone/ watch misfit? or its the update?
I have already factory reset my watch, to no avail.
Please share your experiences guys.
For me this works super cool, no problem. Speaker is very loud and clear. I use it 50% volume at home, whitch is enough.
taiseer999 said:
Phone calls cannot be received (heard or voice out) from phone if bluetooth (Play phone audio on watch) is selected. (unlike my previous iWatch)
Click to expand...
Click to collapse
When you accept phone call on a phone voice is automatically directed through phone's earpiece. When you accept it on the watch, voice goes through the watch.
You can also switch voice direction during call using button having BT icon within in-call screen. This is how it works for me on Nexus 5x and I find it quite consistent.
C3C076 said:
When you accept phone call on a phone voice is automatically directed through phone's earpiece. When you accept it on the watch, voice goes through the watch.
You can also switch voice direction during call using button having BT icon within in-call screen. This is how it works for me on Nexus 5x and I find it quite consistent.
Click to expand...
Click to collapse
Unfortunately answering the call from the screen doesn't activate the ear speaker in my case, but I can activate the loud speaker!
Sent from my SM-N920C using Tapatalk
taiseer999 said:
Unfortunately answering the call from the screen doesn't activate the ear speaker in my case, but I can activate the loud speaker!
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Answering the call from the watch screen will answer on the watch. To me that is as expected. If you want to answer it on the phone use the phone to answer instead of watch.
Sent from my Nexus 6 using Tapatalk
I guess it's dependent on a device type, Android version it is running and most importantly a dialer app that it is running.
I can imagine devices having custom dialer supplied by a vendor that significantly differs from the standard Android one could yield different results.
Anybody else encountered FB messenger crash?
I'm facing very serious problems while trying to use HWatch to make/answer calls.
1. Without activating "Play phone audio on watch" everything works as before (no way to answer the call without pulling the phone). Somehow expected behaviour.
2. When I activate "Play phone audio on watch", I can answer the call on watch and apparently it thinks the call is going normally. Byt nothing can be heard on either side of the call. On phone the in-call UI is also displayed and no sounds played or recorded.
3. What's even worse, when I conventionally answer the call on my phone, it's somehow answered also on watch, with result being similar to 2 - no voice whatsover on either device - for about 10 seconds. After that the call is hung up on watch and starts to be hearable on phone. This is very annoying.
I admit, I have an old Samsung Galaxy SII running SlimKat 4.4.4 (which should include standard AOSP dialer). Maybe it has an old version of Blutooth or something screwed elsewhere. But for me the new 1.4 functions are now plain unusable.
Edit: Point 3 somehow fixed (or demonstrates randomly). But still: no audio stream between phone and watch.
nalott said:
I'm facing very serious problems while trying to use HWatch to make/answer calls.
1. Without activating "Play phone audio on watch" everything works as before (no way to answer the call without pulling the phone). Somehow expected behaviour.
2. When I activate "Play phone audio on watch", I can answer the call on watch and apparently it thinks the call is going normally. Byt nothing can be heard on either side of the call. On phone the in-call UI is also displayed and no sounds played or recorded.
3. What's even worse, when I conventionally answer the call on my phone, it's somehow answered also on watch, with result being similar to 2 - no voice whatsover on either device - for about 10 seconds. After that the call is hung up on watch and starts to be hearable on phone. This is very annoying.
I admit, I have an old Samsung Galaxy SII running SlimKat 4.4.4 (which should include standard AOSP dialer). Maybe it has an old version of Blutooth or something screwed elsewhere. But for me the new 1.4 functions are now plain unusable.
Click to expand...
Click to collapse
Well I am somehow facing same issues with my GN 5 with the latest MM, in addition to crashing of FB messenger... Line and other voice calling apps are running fine.
Hi All
I got a refurbished G3 recently, flashed fulmics 6.5, Xceed and xposed and start enjoying my use of it. However, I just found an issue that is really annoying - the microphone during speakerphone call does not pick anything. Microphone works fine during regular call, when using skype video call or when using voice search for instance. Any suggestions? How many mics are there in the phone?
Thanks!