Related
Hello, I would like to add libusb library to my Nook Simple Touch. I read few documents how to port and compile it. As it seems to me there are two options:
1.Putting your sources into the Android source tree and compiling them with the Android tool chain.
I'm new to this and my questions may sound stupid but I don't want to mess things up.
I found only NTS kernel source, but which android source tree I need to use and where to find it?
2.Compiling your sources statically with another tool chain.
Do I need to use Android NDK?
Is it possible to make an update zip containing ported library?
I need some directions for further reading. Thank you! Best regards, Andy
So I have been trying to get a functional build of this devices kernel for a while now and I have to say it sucks.
My first problem was finding the actual kernel source which isn't on the aosp site but rather in the chromium source. When I finally found the kernel source for it, I was greeted with an absurd amount of branches. I mean aosp has like 6 branches for a device after 4 or so years and this device has countless branches referencing its multitude of names (pixel c, ryu, smaug, and dragon). Anyways I decided to pick the chromeos-3.18 branch (https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.18) not sure if this is right. Then I spent forever looking for a fitting defconfig which there was none, only to find you have to run a script with the right flavor and device to create the defconfig. I finally got that done and got a dragon_defconfig that let me build a kernel binary.
Here is where I am stuck. So before I went to substitute this binary in the boot image I just wanted to try making a boot image with the stock provided kernel.
I was able to build using "make bootimage" and got a boot image that sent me into a bootloop. And this is with the 6.0.1r16 branch with no modifications. I looked into the dragon-kernel and noticed the provided kernel file is a file called Image.fit which is the first time seeing such a file format. The kernel binary I created was just an "Image" and a compressed version "Image.gz" but neither is anything like the Image.fit file that is provided.
Either way I am really stuck and the lack of documentation pertaining to the pixel kernel source is frustrating. Can anyone help me out?
Hi,
I am trying to port LineageOS to an unsupported device, an IBall Slide Cuddle A4.
Here's the guide I'm following : https://fat-tire.github.io/porting-intro.html
This is the part where I need help:
"Add the blobs to the vendor/ directory
Once you have a working recovery, it's now time to get CyanogenMod building and working.
The first thing to do is to get all the proprietary, binary blobs into the vendor/ folder, along with a .mk file that will include them in the final build.
This requires three steps:
Create extract-files.sh and setup-makefiles.sh scripts to pull those blob files from the device using adb and put them in the right /vendor/ directory. There are plenty of examples available for other devices.
Create an .mk Makefile to copy those files to the $OUT folder during the build process and put them in the right place. Again, use other devices as a guide for what this Makefile should look like. An example filename might be BoardConfigVendor.mk
Make sure that the Makefile you just created is included from your main BoardConfig.mk via a command such as -include vendor/[vendor]/[codename]/BoardConfigVendor.mk. Again, existing devices can illustrate how this is done.
Now revise the device/ directory
Since you have a working recovery, go back and start modifying the files in the device/ folder. As always, use other similar devices as a reference.
You now have a easy means to do backups and test your builds. So start tweaking the device folder itself, and see if you get it to boot... Once you do, from there its a matter of building and supporting the various parts and peripherals, one-by-one. "
Click to expand...
Click to collapse
Q #1: Where all should I look on my device for the proprietary blobs, and what do they look like? Can I manually extract them out of my existing ROM and paste them into the proper folder of the new one?
Q #2: What do I modify in the device/ folder?
Q #3: What does it mean to "build and support the various parts and peripherals" Does this mean to add the necessary drivers? If so, can I get these drivers from the stock ROM?
The reason I have to ask this here is because my device has NO similar LineageOS-supported devices with the same chipset for me to refer to. My tablet has a MediaTek MT8392 chipset, and I couldn't find any supported devices with an MT8392 (or an MT6592, which is very similar). Also, there is NO code available from the manufacturer, at all. The only resource I have is a stock ROM.
Are there any other ways in which a device can be similar enough for me to use as reference?
It would be really nice if someone could provide links to articles explaining the above 3 things, or if someone has already gone through this process, share their experience.
Also, will my kernel (v3.4.67) be compatible with the latest LineageOS 16 / Android 9 or will I have to build an earlier version?
I am very new to Android development, but that doesn't mean that I can't learn!
That's a hard task for getting started. A mtk device with no twrp available. I recommend to start with low hanging fruits. Like buying an old phone with dropped lineageOS support and building an updated version.
I understand that it is quite difficult. So instead of doing a full port myself, I am now trying the method of taking an image made for a similar MTK device and transferring the device-specific files from my stock ROM, as shown in the following guide:
https://www.techubng.com/2017/09/how-to-port-lineage-os-14-nougat-rom-on-mtk.html
It says:
"From System/lib/hw: Delete all mt6572.so blobs and replace with these blobs: DOWNLOAD BLOBS
Now copy these files from stock to port:
System/lib/hwcomposer.mt65xx.so
System/lib/gralloc
System/lib/lib.audio.primary.so
Systemlib/lib.mali.soS
System/Etc
System/lib/libcameracustom.so
System/etc/firmware
System/lib/libfeatureio.so
boot/kernel
boot/unventd.rc (only if you are getting stuck at logo)
boot/Replace only camera lines under #Camera from stock boot.img init.rc to init.mt6572.rclib/libcamdrv.solib/libcamalgo.so"
But my stock ROM does not have any of the files he listed uner /system/lib! Can I ignore these files, or is there some other place where these files could be? (I checked /vendor)
Also, what about all the other files in /system/lib? Which ones are device-specific and does anything else need to be copied into the new ROM?
As for the TWRP, I have found tools like Easy Magic TWRP Installer ( https://forum.hovatek.com/thread-5162.html ) which will automatically do the porting given the boot.img and recovery.img from the stock ROM. Are these safe to use, as long as I provide the right info to the tool?
I want to use LineageOS on this tablet because the stock OS has some annoying bugs and is quite old (Android 4.4.2) considering how recent the tablet is and how much capability the tablet's hardware has. The manufacturer (IBall) has provided no updates at all.
Lineage OS on Samsung Galaxy J3 Achieve (SM-J337P)
Can I pay a developer to make a working ROM to put Lineage OS on the Samsung Galaxy J3 Achieve (SM-J337P) ?
If so, how do I find a developer who can do it?
hey, i have a sm-t280 that have a similar supported device. how i port to it?
i have a sm-t280 that i wan't to update the android. the only exit i found it's build linegeos or aosp for it, can anyone help me?
here is the source tree:
vendor tree: huttps://github.com/gtexswifi/android_vendor_samsung_gtexswifi
-----
device tree: huttps://github.com/gtexswifi/android_device_samsung_gtexswifi
-----
kernel tree: huttps://github.com/pfent/sm-t280-kernel
[i writed huttps because i don't have posted 10 posts already]
Porting similar device mt6750t
vinaypundith said:
I understand that it is quite difficult. So instead of doing a full port myself, I am now trying the method of taking an image made for a similar MTK device and transferring the device-specific files from my stock ROM, as shown in the following guide:
https://www.techubng.com/2017/09/how-to-port-lineage-os-14-nougat-rom-on-mtk.html
It says:
"From System/lib/hw: Delete all mt6572.so blobs and replace with these blobs: DOWNLOAD BLOBS
Now copy these files from stock to port:
System/lib/hwcomposer.mt65xx.so
System/lib/gralloc
System/lib/lib.audio.primary.so
Systemlib/lib.mali.soS
System/Etc
System/lib/libcameracustom.so
System/etc/firmware
System/lib/libfeatureio.so
boot/kernel
boot/unventd.rc (only if you are getting stuck at logo)
boot/Replace only camera lines under #Camera from stock boot.img init.rc to init.mt6572.rclib/libcamdrv.solib/libcamalgo.so"
But my stock ROM does not have any of the files he listed uner /system/lib! Can I ignore these files, or is there some other place where these files could be? (I checked /vendor)
Also, what about all the other files in /system/lib? Which ones are device-specific and does anything else need to be copied into the new ROM?
As for the TWRP, I have found tools like Easy Magic TWRP Installer ( https://forum.hovatek.com/thread-5162.html ) which will automatically do the porting given the boot.img and recovery.img from the stock ROM. Are these safe to use, as long as I provide the right info to the tool?
I want to use LineageOS on this tablet because the stock OS has some annoying bugs and is quite old (Android 4.4.2) considering how recent the tablet is and how much capability the tablet's hardware has. The manufacturer (IBall) has provided no updates at all.
Click to expand...
Click to collapse
I saw Lineage OS 16 for HomTom S99….
I have HomTom HT70 with same Chipset of HomTom S99 MT6750T….
Im trying to read and follow carefully your guide but still i have bootloop..
Is it Possible to Port it to Homtom HT70 so we can have Android 9 too??
https://forum.xda-developers.com/ge...tom-ht70-6-0-hd-189-mt6750t-4gb-64gb-t3803052
hey, I have a samsung j7 j700t (t-mobile), and if it has a similar version that is the j700f / h / m, but I have tried it and it does not work for me. What do I have to do to make it work for me? Help me please!!!
AlexRsl1999 said:
hey, I have a samsung j7 j700t (t-mobile), and if it has a similar version that is the j700f / h / m, but I have tried it and it does not work for me. What do I have to do to make it work for me? Help me please!!!
Click to expand...
Click to collapse
Different processsor. J700t is Qualcomm. J700f is exynos
kurtn said:
Different processsor. J700t is Qualcomm. J700f is exynos
Click to expand...
Click to collapse
But my processor is Exynos 7580 to 1.5GHz
AlexRsl1999 said:
But my processor is Exynos 7580 to 1.5GHz
Click to expand...
Click to collapse
If you haven't already, I'd recommend checking in Geekbench as there's a lot of conflicting information on the web. Usually, Samsung only puts the Exynos chip in GSM only devices sold outside the US.
There is a custom rom for a variant of my device (Huawei g760) please how can i make it work on my device (Huawei g7-UL20) they both have the same specs and processor everything is the same
YomaAroriode said:
There is a custom rom for a variant of my device (Huawei g760) please how can i make it work on my device (Huawei g7-UL20) they both have the same specs and processor everything is the same
Click to expand...
Click to collapse
Have you unlocked the bootloader, before huawei stopped allowing it?
kurtn said:
Have you unlocked the bootloader, before huawei stopped allowing it?
Click to expand...
Click to collapse
Yes my bootloader is unlocked
kurtn said:
Have you unlocked the bootloader, befes ore huawei stopped allowing it?
Click to expand...
Click to collapse
Yes my bootloader is unlocked
I followed this guide: https://forum.xda-developers.com/t/guide-porting-twrp-without-source.3843473/
And ported the twrp recovery made for huawei g760 to my g7-UL20
Now how do i modify the custom rom for it to work on my device. Please i need your help!!
kurtn said:
That's a hard task for getting started. A mtk device with no twrp available. I recommend to start with low hanging fruits. Like buying an old phone with dropped lineageOS support and building an updated version.
Click to expand...
Click to collapse
Hi there, I just noticed this reply you had made and I have a question about a device that may have had Lineage support.
What I would like to do, once I have my new phone that is, is to take my current phone Motorola Edge+ (2020) and turn it into a small Lineage tablet.
However, there is one slight problem with this, and that is rhat there is currently no Lineage support for this device, but there is support for it's younger brother the Motorola Edge (2020).
Now I do know that porting is possible between devices, but I've seen a lot of guides says they should have the certain similarities such as processor and such.
However the CPU, GPU and Chipset are slightly different (Same brands though), will this pose a problem in porting?
I of course do realize that I will of course need the proprietary blobs from Motorola for this device and I believe I have found them.
Finally, I am curious if you know of any up to date guides on porting? I will of course continue researching myself, however I thought I would make an enquiry anyway.
Any help you may be able to provide would be greatly appreciated.
Bloodstalker
Bloodstalker82 said:
Hi there, I just noticed this reply you had made and I have a question about a device that may have had Lineage support.
What I would like to do, once I have my new phone that is, is to take my current phone Motorola Edge+ (2020) and turn it into a small Lineage tablet.
However, there is one slight problem with this, and that is rhat there is currently no Lineage support for this device, but there is support for it's younger brother the Motorola Edge (2020).
Now I do know that porting is possible between devices, but I've seen a lot of guides says they should have the certain similarities such as processor and such.
However the CPU, GPU and Chipset are slightly different (Same brands though), will this pose a problem in porting?
I of course do realize that I will of course need the proprietary blobs from Motorola for this device and I believe I have found them.
Finally, I am curious if you know of any up to date guides on porting? I will of course continue researching myself, however I thought I would make an enquiry anyway.
Any help you may be able to provide would be greatly appreciated.
Bloodstalker
Click to expand...
Click to collapse
Install a gsi
GSI Rom´s For Motorola Edge +?
Hi for everyone! I have been looking for custom rom for our Motorola Edge +. But I haven't found any yet. However there is the option of the GSI rom's, this smartphone has an A / B system partition. 64-bit ARM CPU architecture. (information...
forum.xda-developers.com
Thank you very much for your reply. I had seen that I could uae a GSI, however I had not realized it is actually possible with Lineage. I clearly misread the topic.
kurtn said:
That's a hard task for getting started. A mtk device with no twrp available. I recommend to start with low hanging fruits. Like buying an old phone with dropped lineageOS support and building an updated version.
Click to expand...
Click to collapse
yo i have a phone with an unofficial version of lineageos 15.1 (Lenovo K8 Note) how would i go about building that newer version
WARNING:
This is not a post targeted to end users. It is a development reference. If you expect any installable download or even added features out of this thread, please close your browser. Thank you.
What is Umbrella?
Umbrella is a project that aims to make the kernel sources that HMD released for Nokia 8 Sirocco (A1N) compatible with the Nokia 8 (NB1). The idea behind this is to replace the outdated 8.0 kernel sources that HMD released for NB1 with more up to date ones that are used in the 9.0 builds for Nokia 8 Sirocco.
Why do this, you might ask. Well, the answer is simple: The devices are so similar that HMD / FIH already have their kernel sources in a shared source tree. You can validate that yourself, by downloading the kernel config from a stock NB1 kernel (under /proc/config.gz), unpacking it, and searching for the commended entry "CONFIG_FIH_A1N". What umbrella does is take the sources that were released for A1N, readd all device specific files for NB1 (they were pruned) from it's original kernel soure, and integrate the stock kernel config (also called defconf) from NB1.
Doing this also lead to some other small quality of life improvements that are not directly relevant to an end user.
Umbrella contains the latest changes from linux-stable (v4.4.179 at the time of writing, compared to the stock v4.4.153), and Qualcomms Codeaurora upstream
The WiFi driver from Qualcomm is compiled directly into the kernel, instead of being loaded as a module. This allows you to flash umbrella based kernels to every build version while keeping everything else working correctly. The stock kernels use signature enforcement, which means that the wifi module that is loaded from the system partition has to be signed against the kernel, which is not the case for every custom kernel or even the kernels that were built for a different security patch.
Unlike the officially released kernel sources, umbrella does not have stupid typos in it's device trees that cause the phone to display white bars on all of your screen etc.
Umbrella disables the block that FIH put in place to prevent users from rebooting into EDL mode from within android (using adb reboot edl).
Umbrella also includes a patch that causes the device to not reset it's entire memory when the kernel crashes, therefore retaining the last kernel output log, which can be used for debugging
You can compile the kernel with compilers newer than GCC 4.9 (not clang though), without having it immideately crash at boot.
It includes a tool that automatically sets up a crosscompiling environment for the kernel.
What Umbrella is not
Umbrella is not a project to add significant new features, or the ability to tweak things beyond what the stock kernel already offers (which is technically not that bad). It aims to be a reference kernel, a base for (potentially) other kernels that are based on it and add those features. I know that that is kind of a broad goal, considering I am the only one who seems to do actual development for this phone, but who knows. Having a lower entry level might help in case someone is curious and wants to get into kernel hacking. And I would certainly be happy if I wasn't the only one developing for this device.
If you want Umbrella to contain features like:
Overclocking
More governors / schedulers / whatever
Color / Sound / whatever control
Wakelock blocking
etc. etc. etc.
then please Alt-F4 your browser right now. Ok, don't do that but at least please don't request it because it will make you get ignored, nothing else.
Why the name Umbrella?
While I developed the initial prototype I watched through 3 Resident Evil movies, and this is kinda a zombie project, so I think the name fits quite well.
Why are you posting this?
I am posting this because I am hoping that it will be useful for anyone that would like to get into kernel development and tweaking without the hassle that comes with setting up the kernel sources that are released by HMD.
But, one disclaimer: I am not a kernel developer. I am a curious CS student suffering from a bad mix of too much time and stupid ideas that solve stupid problems. I am trying my best to produce something useful and be of help, but please don't expect wonders from me, thanks.
Links?
Source: https://github.com/resident-nokia/umbrella
Download: None, this is a development reference.
Looks promising
Sent from my NB1 using XDA Labs
Nice. this will likely be useful in the future
Updated the umbrella source to the latest 4.4.180 kernel, and May 07 CAF tag (LA.UM.7.4.r1-05100-8x98.0). Also readded some NB1 specific code where it was missing (discovered by doing a diff against the 5140 kernel source that Nokia recently released).
Just in case anyone actually cares about it
THMSP said:
Updated the umbrella source to the latest 4.4.180 kernel, and May 07 CAF tag (LA.UM.7.4.r1-05100-8x98.0). Also readded some NB1 specific code where it was missing (discovered by doing a diff against the 5140 kernel source that Nokia recently released).
Just in case anyone actually cares about it
Click to expand...
Click to collapse
I do. Who knows, in a year's time I might have enough knowledge to build a custom Rom for this phone
Kernel sources which is used on pie has been released officially. Finally, we have an "original" kernel and we've got closed one more step to custom roms.
https://www.nokia.com/phones/en_int/opensource/
techno_man000 said:
Kernel sources which is used on pie has been released officially. Finally, we have an "original" kernel and we've got closed one more step to custom roms.
https://www.nokia.com/phones/en_int/opensource/
Click to expand...
Click to collapse
@THMSP it would be interesting to let us know how different is your kernel mod from the newly released official pie kernel for Nokia 8
MDV106 said:
@THMSP it would be interesting to let us know how different is your kernel mod from the newly released official pie kernel for Nokia 8
Click to expand...
Click to collapse
As I described here: https://forum.xda-developers.com/nokia-8/development/official-source-code-releases-nokia-8-t3930324, they are identical. The only difference are the device tree files (which still contain typos that break the display), and of course all modifications I made to the sirocco kernel source that Umbrella is based on (wifi driver, EDL mode reactivation, upstreaming, etc.)
THMSP said:
As I described here: https://forum.xda-developers.com/nokia-8/development/official-source-code-releases-nokia-8-t3930324, they are identical. The only difference are the device tree files (which still contain typos that break the display), and of course all modifications I made to the sirocco kernel source that Umbrella is based on (wifi driver, EDL mode reactivation, upstreaming, etc.)
Click to expand...
Click to collapse
So, are these new codes broken like 4.84?
techno_man000 said:
So, are these new codes broken like 4.84?
Click to expand...
Click to collapse
I wouldn't call Nokia sources broken, but I would call them incomplete, outdated and impractical to work with. And that hasn't changed.
Iam currently building device tree for nokia 8..
Unable to figure out how to edit init folder specifically for nokia8
[email protected] said:
Iam currently building device tree for nokia 8..
Unable to figure out how to edit init folder specifically for nokia8
Click to expand...
Click to collapse
Please do so! We can't let this phone die so early!
which defconfig file should choose?
lk
[email protected] said:
which defconfig file should choose?
Click to expand...
Click to collapse
nb1_defconfig is for Nokia 8
Can somebody help me? I have built Lineage OS 16.0 for the Nokia 8 with the Umbrella Kernel. However I am facing issues with getting it into work. Firstly TWRP fails to flash it with error 7. I am including the recovery.log file in case anyone wants more detail. I then proceeded to extract the payload.bin file, and flashed boot.img and system.img seperately. However that didnt work either as my phone got stuck at the Bootloader unlocked warning screen. If anyone is interesteed I can upload the .zip outputed by the build
Device Tree: https://github.com/GPUCode/android_device_nokia_nb1
Recovery.log: https://hastebin.com/akohutiwed.sql
Thanks in advanced
emufan4568 said:
Can somebody help me? I have built Lineage OS 16.0 for the Nokia 8 with the Umbrella Kernel. However I am facing issues with getting it into work. Firstly TWRP fails to flash it with error 7. I am including the recovery.log file in case anyone wants more detail. I then proceeded to extract the payload.bin file, and flashed boot.img and system.img seperately. However that didnt work either as my phone got stuck at the Bootloader unlocked warning screen. If anyone is interesteed I can upload the .zip outputed by the build
Device Tree: https://github.com/GPUCode/android_device_nokia_nb1
Recovery.log: https://hastebin.com/akohutiwed.sql
Thanks in advanced
Click to expand...
Click to collapse
hey, did you wipe userdata before flashing this? I think you need to do that, like when switching to using GSIs.
also, have you checked this https://github.com/resident-nokia/twrp? Specifically the fstab file for NB1.
oaid said:
hey, did you wipe userdata before flashing this? I think you need to do that, like when switching to using GSIs.
Click to expand...
Click to collapse
Thanks for the suggestion. I have flashed GSIs before but never had any problems. Also I cannot find any userdata partition in TWRP. I asked in the Lineage OS discord and I was told that probably that TWRP image is broken. I am confused
emufan4568 said:
Thanks for the suggestion. I have flashed GSIs before but never had any problems. Also I cannot find any userdata partition in TWRP. I asked in the Lineage OS discord and I was told that probably that TWRP image is broken. I am confused
Click to expand...
Click to collapse
that's the data partition, if I'm not mistaken ?*
which twrp image are you using? Maybe try Dorian's latest?
oaid said:
that's the data partition, if I'm not mistaken ?*
which twrp image are you using? Maybe try Dorian's latest?
Click to expand...
Click to collapse
Yes I am using the latest TWRP. Before flashing I erased the data partition but still the error persisted
I'm trying to build for a device that has no known Android 10 device trees that I can find. I think I fleshed out the trees pretty well by following some sister/cousin devices and extracting a lot of stuff from the rooted phone itself, but my build fails at 2% due to a missing output file. The missing libdss.so file should be built as part of the kernel (whose source I have), but the build clearly isn't happening (or isn't happening in time to be recognized by the build system.)
I tried to build the kernel as a standalone module to see what might be wrong, and in trying to do that I can't seem to resolve all the issues with dependencies for cross-compilation to arm64. I've built for devices with existing trees by cherry-picking what I needed, but I've never built for something from the ground-up like this. I don't want to make the ROM with a pre-built kernel as the end-goal would be to become official. The attached image is the exact error I'm receiving, and the following links are to all of my source repositories that I'm using in addition to the Lineage17.1 base. Any help would be appreciated. I work as a full-time dev by day, I don't mind slogging around in some code if that's what I takes, I've just reached the end of my troubleshooting knowledge here and am not sure what the next step might be.
https://github.com/polaarbear/android_device_motorola_troika_sprout
https://github.com/polaarbear/android_device_motorola_universal9610-common
https://github.com/polaarbear/android_vendor_motorola_universal9610-common
https://github.com/polaarbear/android_kernel_motorola_universal9610