hii guys i made a mistake of using wrong recovery.img on my canvas 4
the screen went blank and the phone rebooted normally. after the boot the touch screen is not behaving properly
the touch has become upside down and it works at few points but not the selected area????
i flashed the phone with the stock rom still the problem is persisting!!!!
i also flashed the correct cwm recovery for a210 with sp tools the phone is booting in recovery mode but even after factory reset the touch screen problem is there:crying:
pls help how to solve this problem..
thanks in advance:good::good::good:
drvjshah said:
hii guys i made a mistake of using wrong recovery.img on my canvas 4
the screen went blank and the phone rebooted normally. after the boot the touch screen is not behaving properly
the touch has become upside down and it works at few points but not the selected area????
i flashed the phone with the stock rom still the problem is persisting!!!!
i also flashed the correct cwm recovery for a210 with sp tools the phone is booting in recovery mode but even after factory reset the touch screen problem is there:crying:
pls help how to solve this problem..
thanks in advance:good::good::good:
Click to expand...
Click to collapse
flash whole stock rom using sp flash tool :good:
007jigar said:
flash whole stock rom using sp flash tool :good:
Click to expand...
Click to collapse
thanks for the reply bro...
i already did flash it with stock rom using sp tools and also showed at micromax service center they said the touch display is gone and need to change the touch screen
Related
Hi. i tried to install maximus new 3.2 rom and after i installed from zip and rebooted my phone, my phone is stuck on the htc logo white screen and keeps rebooting!
i tried to go back to recovery and it doesnt work now! the phone goes into a black screen then reboots again!
try in fastboot mode fastboot erase cache .
you posted in wrong section
Don't forget to reflash kernel modules incase you are using a custom kernel and if you need to reflash the recovery in fastboot make sure your battery isn't below 10% else fastboot won't allow you to flash it.
Sent from my HTC One X using Tapatalk 2
jonneymendoza said:
Hi. i tried to install maximus new 3.2 rom and after i installed from zip and rebooted my phone, my phone is stuck on the htc logo white screen and keeps rebooting!
i tried to go back to recovery and it doesnt work now! the phone goes into a black screen then reboots again!
Click to expand...
Click to collapse
I have the same problem. The solution is simple: Flash the default recovery then re-flash the clockworkmod recovery again and then try.
You mention which rom you installed and that you flashed the zip file but don't mention that you did a wipe before this (depending on which rom you were previously on) or that you flashed the boot.img file via fastboot first.
PS! There's a section specifically for Q&A and these types of posts should go there are not to be posted in the dev section. Hopefully some kind mod will move it, but I guess you have a few answers by now.
jonneymendoza said:
Hi. i tried to install maximus new 3.2 rom and after i installed from zip and rebooted my phone, my phone is stuck on the htc logo white screen and keeps rebooting!
i tried to go back to recovery and it doesnt work now! the phone goes into a black screen then reboots again!
Click to expand...
Click to collapse
You haven't flashed the boot.img if your phone keeps rebooting.
Also - you've posted this in the wrong section, this is a development section only.
Sent from my HTC One X using Tapatalk 2
theintelligent said:
I have the same problem. The solution is simple: Flash the default recovery then re-flash the clockworkmod recovery again and then try.
Click to expand...
Click to collapse
Soz for the delay but this is what i done and it worked. reflashed the recovery from fastboot mode and it worked.
i dont know why some rom and karnals dont boot up properly. a pain really. nearly got worried when maximus lates stable rom messed up my recovery clockworkmod!
Hi,
I have a Xperia S and have unlocked the bootloader and rooted. I then used RecoverX to put CWM on. Then when I try to boot in to recovery (tapping sony logo as it boots), the screen goes black and nothing happens.
Anyone got any ideas?
Note that if I don't tap to go in to recovery the phone boots fine.
Cheers,
Iain
i think u must install custom kernel with CWM recovery or TWRP to get into recovery mode....
36468824 2111
iwabernethy said:
Hi,
I have a Xperia S and have unlocked the bootloader and rooted. I then used RecoverX to put CWM on. Then when I try to boot in to recovery (tapping sony logo as it boots), the screen goes black and nothing happens.
Anyone got any ideas?
Note that if I don't tap to go in to recovery the phone boots fine.
Cheers,
Iain
Click to expand...
Click to collapse
Go to flash boot and reflash kernel either TWRP or CWM. This should resolve the issue.
shahrukhqasim said:
Go to flash boot and reflash kernel either TWRP or CWM. This should resolve the issue.
Click to expand...
Click to collapse
So if I flash a new kernel I can load in to that and then use it to load any ROM? Can you recomend a particular kernel? I've looked at some of the ones linked from the roll up and it's all a bit confusing to me - they all seem to say they are only for this rom or that rom.
Try doomkernel....http://d-h.st/qE0
Sent from my LT26i using XDA Premium 4 mobile app
iwabernethy said:
Hi,
I have a Xperia S and have unlocked the bootloader and rooted. I then used RecoverX to put CWM on. Then when I try to boot in to recovery (tapping sony logo as it boots), the screen goes black and nothing happens.
Anyone got any ideas?
Note that if I don't tap to go in to recovery the phone boots fine.
Cheers,
Iain
Click to expand...
Click to collapse
Must be a problem with the recovery.. use sony emma flashtool to flash Advanced stock kernel for your firmware... check if your firmware is .200 or .211 or .96.. go to this link to download kernel..
http://forum.xda-developers.com/showthread.php?t=2302393
check your firmware and download the appropriate kernel.. and flash via flashtool.. in fastboot mode.. and after flashing.. reboot and an amber light will show up on your notification light, then press volume + several times to enter CWM.. (just follow the steps in the link)
Good Luck..!! :fingers-crossed:
Hit thanks if I helped..
</b>
Hi,
I was trying to flash STOCK ROM.
After flashing the stock rom, I found that I lost IMEI numbers and bluetooth address.
So, I went back to recovery to flash the rom again, Android Bot with red alert was coming.
So, I used SP tools to flash the ROM again but now with "Format option" including boot loader also.
After that, phone is stuck in Micromax logo and am not able to access anything including recovery.
Pls help. </b>
asantikari said:
</b>
Hi,
I was trying to flash STOCK ROM.
After flashing the stock rom, I found that I lost IMEI numbers and bluetooth address.
So, I went back to recovery to flash the rom again, Android Bot with red alert was coming.
So, I used SP tools to flash the ROM again but now with "Format option" including boot loader also.
After that, phone is stuck in Micromax logo and am not able to access anything including recovery.
Pls help. </b>
Click to expand...
Click to collapse
Use SP tools again to download (flash) complete stock ROM again. This time, use "Firmware Upgrade" option.
To fix IMEI issue, install Android CDC Gadget Drivers and use MAUI Meta 3G tool. Use this tutorial: http://www.youtube.com/watch?feature=player_embedded&v=-CokpIVGPBw
Hi GokulNC,
I tried flashing it but still its the same condition.
When I did a memory test from SP FLASH TOOL, it sayid NAND flash was not detected.
asantikari said:
I tried flashing it but still its the same condition.
When I did a memory test from SP FLASH TOOL, it sayid NAND flash was not detected.
Click to expand...
Click to collapse
So, if your phone is booting up, it means you can access boot loader menu. Press Volume up+power button and choose fastboot mode. Unlock the boot loader and flash any ROM or Nandroid backup from anyone. Otherwise format all the partitions from ADB and try reflashing the stock ROM using SP Tools
GokulNC said:
So, if your phone is booting up, it means you can access boot loader menu. Press Volume up+power button and choose fastboot mode. Unlock the boot loader and flash any ROM or Nandroid backup from anyone. Otherwise format all the partitions from ADB and try reflashing the stock ROM using SP Tools
Click to expand...
Click to collapse
I dis flash it again after oem unlock. I fixed the IMEI also. Now stock recovery is not working so I installed CMW Recovey. When i checked the logs, it says cannot load volume/misc.
also I am not able to root using sideload.
asantikari said:
I dis flash it again after oem unlock. I fixed the IMEI also. Now stock recovery is not working so I installed CMW Recovey. When i checked the logs, it says cannot load volume/misc.
also I am not able to root using sideload.
Click to expand...
Click to collapse
You cannot just say that stock recovery is not working.
To work with stock recovery, you need to hold power button and press volume up bottom top access the options. That's how it works. Moreover, you cannot do much with stock recovery. Its features are limited. In this case, custom recovery helps
Can you tell why misc error comes when we install cmw recovery
Sent from my Micromax AQ4501 using XDA Free mobile app
My micromax android one is not working ....when I switch off the phone and when I started it ..it is stuck in after micromax logo that four dot one plz help urgently
My phone is totally stopped there no any recovery option ia opening
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Thanks bro. Really helpful!
HI i got the new update ANDROID 6.0 MARSHMALLOW after i download successfullly when i prress restart and install .................it starts installing for few seconds then it gives error with dead android logo ....and restarts after some time and then it tells to download the update again ....i tried 3 times results were still the same every time...please help
also tried to side load manually.... ANDROID 6.0 ...after i click apply from sd card when it shows verifying system then it gives an error aborts the update ...and shows this
{system/priv-app/prebuiltgmscore.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
(MY PHONE IS NEVER ROOTED OR FLASHED OR HACKED)
(MY IS COMPLETELY CLEAN)
please help...
It means now u r on stock lollipop so root ur device and flash custom rom like cm12.1 and njiy
Sent from my Micromax AQ4501 using XDA Free mobile app
mashoodmasst said:
HI i got the new update ANDROID 6.0 MARSHMALLOW after i download successfullly when i prress restart and install .................it starts installing for few seconds then it gives error with dead android logo ....and restarts after some time and then it tells to download the update again ....i tried 3 times results were still the same every time...please help
also tried to side load manually.... ANDROID 6.0 ...after i click apply from sd card when it shows verifying system then it gives an error aborts the update ...and shows this
{system/priv-app/prebuiltgmscore.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
(MY PHONE IS NEVER ROOTED OR FLASHED OR HACKED)
(MY IS COMPLETELY CLEAN)
please help...
Click to expand...
Click to collapse
No need to root just unlock bootloader ,download Zip file of marshmallow .press power button+volume up for 3 sec,select apply update Zip and select that Zip file and that it .if any problem faced ping me.
Rexspidy said:
No need to root just unlock bootloader ,download Zip file of marshmallow .press power button+volume up for 3 sec,select apply update Zip and select that Zip file and that it .if any problem faced ping me.
Click to expand...
Click to collapse
If you done above steps that mean your build no. Is not appropriate for update update lolipop 5.1.1 to latest lolipop .
Mr problem is solved
Thank you all of you...I have successfully flashed my phone from Lollipop 5.1.1 to lollipop 5.1. After that within half-hour I got the update to marshmallow... Now I have nothing to worry about... Except one problem battery drains faster than usual. And heats alot...
So I switch my phone off for a while to cool down.,.. Thank you
mashoodmasst said:
Thank you all of you...I have successfully flashed my phone from Lollipop 5.1.1 to lollipop 5.1. After that within half-hour I got the update to marshmallow... Now I have nothing to worry about... Except one problem battery drains faster than usual. And heats alot...
So I switch my phone off for a while to cool down.,.. Thank you
Click to expand...
Click to collapse
Battery problem is çommon issue of marshmallow but your device is heating also take a serious look on thàt .by the battery problem will be solved on next update I hope and don't worry after using 2 weeks of the phone battery will automatically stable.
Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
Didn't work for me
AAB4K said:
Didn't work for me
Click to expand...
Click to collapse
What error is coming still the dead logo??
Sent from my Micromax AQ4501 using XDA-Developers mobile app
Facing same issue, dead logo. Am on MM 6.0.1. April securty patch not getting installed. tried downloading zip and installing manually. still no luck.
error showing is
{system/priv-app/calendargoogleprebuilt.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
stock rom. not rooted
Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
If not wrong ur are missing something..
After dead android logo u have to press power button and then volume (up/down) didn't remembered exactly. Then only u will be taken to recovery mode. if on stock recovery
Other wise hitting recovery button only will take u to ur custom recovery.
Sent from my sprout4 using XDA Labs
harsh. said:
If not wrong ur are missing something..
After dead android logo u have to press power button and then volume (up/down) didn't remembered exactly. Then only u will be taken to recovery mode. if on stock recovery
Other wise hitting recovery button only will take u to ur custom recovery.
Sent from my sprout4 using XDA Labs
Click to expand...
Click to collapse
I hope that part how to go to revory known to all ,So I skip it.After Marshmallow first update it does not matter you are in Stock Rom or Custom Rom ,there will be no custom Recovery mode however how hard you try to flash CWM or TWRP .I tried in 3 handset,all given same result .So, I mention how to get to Custom Recovery in an optional way.
Rexspidy said:
I hope that part how to go to revory known to all ,So I skip it.After Marshmallow first update it does not matter you are in Stock Rom or Custom Rom ,there will be no custom Recovery mode however how hard you try to flash CWM or TWRP .I tried in 3 handset,all given same result .So, I mention how to get to Custom Recovery in an optional way.
Click to expand...
Click to collapse
I have rooted 2 Android one device after marshmallow. no problems at all.
using adb and unlocking Boot loader. But you have to reboot to recovery after flashing it.before rebooting system
Sent from my sprout4 using XDA Labs
harsh. said:
I have rooted 2 one device after marshmallow. no problems at all.
using adb and unlocking Boot loader. But you have to reboot to recovery after flashing it.before rebooting system
Sent from my sprout4 using Labs
Click to expand...
Click to collapse
Thats Quite interesting ,it never worked for me although I reboot in recovery first then system.After rebooting system whenever I tried Recovery mode I end up with stock recovery.Maybe some problem with flashing.
Rexspidy said:
Thats Quite interesting ,it never worked for me although I reboot in recovery first then system.After rebooting system whenever I tried Recovery mode I end up with stock recovery.Maybe some problem with flashing.
Click to expand...
Click to collapse
After 1st reboot do you get cwm Or twrp?
Sent from my sprout4 using XDA Labs
harsh. said:
After 1st reboot do you get cwm Or twrp?
Sent from my sprout4 using XDA Labs
Click to expand...
Click to collapse
Thats little funny, got dead android only.
Rexspidy said:
got dead android only.
Click to expand...
Click to collapse
It means u have not flashed recovery correctly.
if you need any help, PM me
or just reply me in thread only . (^~^)
Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
LOL
When you see android bot logo, you are in recovery mode. But recovery menu options are hidden.
After you see the dead bot logo, hold power up for 5 seconds and then hit vol up (or hold both for 5 seconds) All recovery options will be visible after this.
Its a bad idea to use a pc every time you want to boot into recovery LOL
Hi guyz can anyone provide me stock recovery.img of build no. MOB30N PLZZ
When i tried to flash an unofficial CMW recovery image file using flashify app, my htc desire 820s stuck in a boot loop. I tried to use SP Flash tool to fix the problem but i can't even turn off my phone to proceed.
I tried to power the phone off but it turns itself on all by itself
SP Flash Tool - Error message : https://onedrive.live.com/?authkey=!AN53tkzqk0fbScM&cid=688CDDEDE5596852&id=688CDDEDE5596852!1926&parId=root&o=OneUp
I also tried to wipe cache partition and data in recovery mode to solve the problem but without success.
I refer to the link below for installing CWM recovery and to recover the system:
http://forum.xda-developers.com/desire-820/development/desire-820s-root-cwm-recovery-stock-t3251639
I'm using an HTC desire 820s kitkat 4.4.4 mediatek processor build version 1.20.707.2 . Help me please! :crying:
ben07 said:
When i tried to flash an unofficial CMW recovery image file using flashify app, my htc desire 820s stuck in a boot loop. I tried to use SP Flash tool to fix the problem but i can't even turn off my phone to proceed.
I tried to power the phone off but it turns itself on all by itself
SP Flash Tool - Error message : https://onedrive.live.com/?authkey=!AN53tkzqk0fbScM&cid=688CDDEDE5596852&id=688CDDEDE5596852!1926&parId=root&o=OneUp
I also tried to wipe cache partition and data in recovery mode to solve the problem but without success.
I refer to the link below for installing CWM recovery and to recover the system:
http://forum.xda-developers.com/desire-820/development/desire-820s-root-cwm-recovery-stock-t3251639
I'm using an HTC desire 820s kitkat 4.4.4 mediatek processor build version 1.20.707.2 . Help me please! :crying:
Click to expand...
Click to collapse
What version of SP Flash Tools are you using?
Gibz97 said:
What version of SP Flash Tools are you using?
Click to expand...
Click to collapse
@Gibz97 SP Flash Tool v5.1352.01. Thanks for responding.
I recently fixed the problem by flashing the "flashable" stock rom from the post on the link above using the default recovery mode.
Fortunately it works but i lost all my data. Anyway thank you so much
ben07 said:
@Gibz97 SP Flash Tool v5.1352.01. Thanks for responding.
I recently fixed the problem by flashing the "flashable" stock rom from the post on the link above using the default recovery mode.
Fortunately it works but i lost all my data. Anyway thank you so much
Click to expand...
Click to collapse
Unfortunately that version of SP Flash Tool doesn't work for our phone
Only v5.1532.00 works. It seems your kernel was corrupt, you would have flashed the boot.img only and preserved your data . I'm glad you solved it though
do one "press volume up ,down and power key at the same time for atleast 10 seconds
ben07 said:
When i tried to flash an unofficial CMW recovery image file using flashify app, my htc desire 820s stuck in a boot loop. I tried to use SP Flash tool to fix the problem but i can't even turn off my phone to proceed.
I tried to power the phone off but it turns itself on all by itself
SP Flash Tool - Error message : https://onedrive.live.com/?authkey=!AN53tkzqk0fbScM&cid=688CDDEDE5596852&id=688CDDEDE5596852!1926&parId=root&o=OneUp
I also tried to wipe cache partition and data in recovery mode to solve the problem but without success.
I refer to the link below for installing CWM recovery and to recover the system:
http://forum.xda-developers.com/desire-820/development/desire-820s-root-cwm-recovery-stock-t3251639
I'm using an HTC desire 820s kitkat 4.4.4 mediatek processor build version 1.20.707.2 . Help me please! :crying:
Click to expand...
Click to collapse
"Vol up +vol down +power key' at the same time to turn off handset okay and
After connecting to USB port press VOL DOWN Key to connect as download or firmware upgrade as you want
My phone is stuck in a bootloop as yours was. Please help!