Develop Bugs

Q Xperia S rooted and bootloader unlocked but cant get in to recovery mode

Hi all
Finally got round to rooting my xperia s and unlocking bootloader with view to installing 4.4.4
Everything has gone fine to the point i tried to install a recvoery
First tried to install TWRP recovery which install went fine but i couldnt get phone in to recvoery so i then installed clockwork mod recovery and still cant get phone in to recvoery.
I installed ROM manager and it shows under recvoery already installed clockworkmod recvoery & TWRP recovery but even when i select boot in to recovery from that phone just turns on as normal.
Have tried holding volume up/down button on sony flash but no good
Have tapped screen when sony logo showing and phone just seems to lock
Anyone got any ideas what i can do?
Thanks

freejack2k said:
Hi all
Finally got round to rooting my xperia s and unlocking bootloader with view to installing 4.4.4
Everything has gone fine to the point i tried to install a recvoery
First tried to install TWRP recovery which install went fine but i couldnt get phone in to recvoery so i then installed clockwork mod recovery and still cant get phone in to recvoery.
I installed ROM manager and it shows under recvoery already installed clockworkmod recvoery & TWRP recovery but even when i select boot in to recovery from that phone just turns on as normal.
Have tried holding volume up/down button on sony flash but no good
Have tapped screen when sony logo showing and phone just seems to lock
Anyone got any ideas what i can do?
Thanks
Click to expand...
Click to collapse
Which ROM are You trying to flash? If it is a Kitkat ROM as You mentioned, then first copy the ROM and gapps to phone for flashing purposes .
Now, on PC, extract the boot.img from rom zip and flash it via fastboot. Then flash the ROM via twrp which would be installed from that boot.img!

Mirhawk said:
Which ROM are You trying to flash? If it is a Kitkat ROM as You mentioned, then first copy the ROM and gapps to phone for flashing purposes .
Now, on PC, extract the boot.img from rom zip and flash it via fastboot. Then flash the ROM via twrp which would be installed from that boot.img!
Click to expand...
Click to collapse
Thanks m8
Could you tell me what i should type in command prompt for fastboot of the boot.img
Thanks

freejack2k said:
Thanks m8
Could you tell me what i should type in command prompt for fastboot of the boot.img
Thanks
Click to expand...
Click to collapse
First connect Your phone to pc. Then type this command:
Code:
adb reboot bootloader
Then Your phone will reboot in fastboot mode(The blue led would be lit.)
If the blue led does not lit up, then disconnect Your phone, power it off. The press volume up button and connect the phone the pc. The phone will have the blue led now.
Then type following command to flash the boot.img:
Code:
fastboot flash boot boot.img
Do note copy the ROM.zip to phone first and then perform above steps.

Mirhawk said:
First connect Your phone to pc. Then type this command:
Code:
adb reboot bootloader
Then Your phone will reboot in fastboot mode(The blue led would be lit.)
If the blue led does not lit up, then disconnect Your phone, power it off. The press volume up button and connect the phone the pc. The phone will have the blue led now.
Then type following command to flash the boot.img:
Code:
fastboot flash boot boot.img
Do note copy the ROM.zip to phone first and then perform above steps.
Click to expand...
Click to collapse
Well did that and phone will now only boot to Sony image and just sits on it.
Still cant get in to recovery but can get in to flash mode so tried reflashing this and original firmware but no matter what it just sticks on Sony and wont boot any further than that.
Looks like i got a brick :crying:

freejack2k said:
Well did that and phone will now only boot to Sony image and just sits on it.
Still cant get in to recovery but can get in to flash mode so tried reflashing this and original firmware but no matter what it just sticks on Sony and wont boot any further than that.
Looks like i got a brick :crying:
Click to expand...
Click to collapse
You must have not flashed the rom after flashing the boot.img. That's why it used to get stuck on boot logo of Sony. The kernel(boot.img) of any Kitkat ROM won't with JB ROM as far as I know.
Don't worry, there is still hope since You can at least get it to boot up halfway.
That flashing the original ftf is weird. Are You sure the ftf file is proper? Try downloading a new one. or if You were able to successfully able to flash the original firmware according to flashtool, try flashing it again using Sony Update Service(SUS). Can't guarantee the SUS will work or not.

Mirhawk said:
You must have not flashed the rom after flashing the boot.img. That's why it used to get stuck on boot logo of Sony. The kernel(boot.img) of any Kitkat ROM won't with JB ROM as far as I know.
Don't worry, there is still hope since You can at least get it to boot up halfway.
That flashing the original ftf is weird. Are You sure the ftf file is proper? Try downloading a new one. or if You were able to successfully able to flash the original firmware according to flashtool, try flashing it again using Sony Update Service(SUS). Can't guarantee the SUS will work or not.
Click to expand...
Click to collapse
Got it all up and running again!!
Used to update service (emma think it was called) and got phone to install recovery then got in to recovery and installed kitkat.
Very happy
Thanks for all the help folks

Mirhawk said:
First connect Your phone to pc. Then type this command:
Code:
adb reboot bootloader
Then Your phone will reboot in fastboot mode(The blue led would be lit.)
If the blue led does not lit up, then disconnect Your phone, power it off. The press volume up button and connect the phone the pc. The phone will have the blue led now.
Then type following command to flash the boot.img:
Code:
fastboot flash boot boot.img
Do note copy the ROM.zip to phone first and then perform above steps.
Click to expand...
Click to collapse
Hello.
I'm trying to get this **** working as well, but even though it seems like you gave some crystal clear instructions I still manage to not understand it. I unlocked the bootloader on my S and downloaded. All I really wanted to do was get a good 4.4 ROM running, any chance you could toss an idiot some help?
From what I understand:
1. copy the ROM zip-file over to phone
2. connect phone to pc and fastboot it
3. flash the boot.img from the rom zip-file
4. flash the ROM (how?)
I did a quick google on twrp but don't quite understand what I need it for or if I need it.
EDIT: After a bit of looking, apparently the ROM I'm looking to flash (Paranoid Android) installs twrp when you flash the boot.img. Just in case that changes anything.

Brick?
Hi. So I just tried to flash the boot.img from the latest Paranoid Android, got 0 errors or bad blocks, succesful flash according to cmd. I did fastboot reboot as the guide here says: http://forum.xda-developers.com/showthread.php?t=1526866
LED notification goes pink for a few seconds, I get the Sony logo then just an infinite black screen. Left it on for about 15 minutes with no success. I tried force rebooting/shutting it down with volup+power for 5/10 seconds, but both of them just result in the phone getting instantly turned back on and going pink LED->Sony logo->black screen. This means I can't (from what I can tell anyway) boot into fastboot (vol-up+connect to USB does nothing, vol-down+connect to USB gets me a green LED for a few seconds but then goes over to pink LED, Sony logo and then black screen).
I would really appreciate any kind of help right now, even just advice on how to turn this phone off would be fantastic, because right now that also seems impossible.

Adyzz said:
Hello.
I'm trying to get this **** working as well, but even though it seems like you gave some crystal clear instructions I still manage to not understand it. I unlocked the bootloader on my S and downloaded. All I really wanted to do was get a good 4.4 ROM running, any chance you could toss an idiot some help?
From what I understand:
1. copy the ROM zip-file over to phone
2. connect phone to pc and fastboot it
3. flash the boot.img from the rom zip-file
4. flash the ROM (how?)
I did a quick google on twrp but don't quite understand what I need it for or if I need it.
EDIT: After a bit of looking, apparently the ROM I'm looking to flash (Paranoid Android) installs twrp when you flash the boot.img. Just in case that changes anything.
Click to expand...
Click to collapse
No worries! If You were able to perform upto step no.3 properly, then when You boot into twrp(Press volume up button 2-3 times while booting up), there is an option there called as "Install". In that You select the zip file of the ROM and slide the bar to install it!

Mirhawk said:
No worries! If You were able to perform upto step no.3 properly, then when You boot into twrp(Press volume up button 2-3 times while booting up), there is an option there called as "Install". In that You select the zip file of the ROM and slide the bar to install it!
Click to expand...
Click to collapse
Holy **** this might have just done it! It wasn't actually twrp but CWM I believe, but I did manage to successfully flash the ROM. Seems to be working as of right now so fingers crossed and a massive thank you!

Bricked phone

Hello,
A friend of mine tried to change from stock ROM to Eragon a few days ago.
He wiped all data and then tried to flash the ROM from Android system recovery but it wont install the ROM.
So now the phone just loads the boot screen when its started but nothing happens after that. I can still get access to Android system recovery.
From what I understand, he should have installed CWM before doing anything really but what's done is done.
Is there a way to save his phone?

Hi,
no worries, it's safe! Just reflash Stock ROM, afterwards CWM and install Eragon.

BlueFlame4 said:
Hi,
no worries, it's safe! Just reflash Stock ROM, afterwards CWM and install Eragon.
Click to expand...
Click to collapse
I have downloaded K05TS-A.A.vA0L.E1.150725.zip (Stock ROM Elephone P8000_20150909_Android)
put that on sd card, then I tried to "apply update from sdcard"
then I get "opening update package..." then "installation aborted"
is there something im doing wrong?

You need to use the sp flash tool, there is a guide somewhere so either try the BBS.elephone forum or Google it you will need to install mtk drivers on your PC/laptop...

charliepie said:
You need to use the sp flash tool, there is a guide somewhere so either try the BBS.elephone forum or Google it you will need to install mtk drivers on your PC/laptop...
Click to expand...
Click to collapse
Sp flash tool wont start to download.
Is there a certain setting that needs to be on phone, when you just connect it android preloader shows up in drivers quickly and then disappear. But if you hold down Vol - you get "CDC Serial"
But when in fastboot you get android "ADB Interface."
From what I have understood you want to stay in Preloader.
How do I do that?
Have read about sp flash tool, but there seems to be problems with the downloading proces and the mtk drivers.
Any idéas?

Click download first and then connect the phone while it's off. The guide on elephone's site is weirdly explained.

marwall said:
Hello,
A friend of mine tried to change from stock ROM to Eragon a few days ago.
He wiped all data and then tried to flash the ROM from Android system recovery but it wont install the ROM.
So now the phone just loads the boot screen when its started but nothing happens after that. I can still get access to Android system recovery.
From what I understand, he should have installed CWM before doing anything really but what's done is done.
Is there a way to save his phone?
Click to expand...
Click to collapse
1. Install drivers on your pc
2. download spflashtool
Turn off phone
3. format all + download K05TS-A.A.vA0L.E1.150725.zip
connect phone to pc while off
4. when its done start phone, takes around 5minutes to boot up.
5. download cwm recovery
6. use Spflashtool again and flash cwm.
7. put eragon 2.5 on your SDcard
8. Restart phone in recovery, turn off, powerbutton + vol up.
9. wipe data / factory and cash, and delvik cash.
10. install eragon 2.5
DONE

Thanks for all your suggestions on how to fix it.
I will try them as soon as possible.

To be clear:
You can only install STOCK ROM with SP Flash Tool
You can only install ERAGON ROM via Recovery
To install ERAGON you need to be ROOT'ed and have working CUSTOM Recovery...

Followed Peinnes list of what to do and it worked!
Thanks alot for the help!

Thx very much for this solution that work fine
Just i lose my imei duration and i fix it via the EngineerMode (*#*#3646633#*#*) connectivity - cds information - radio information - phone 1 - AT+ EGMR=1,7,"IMEI" and for phone 2 AT+ EGMR=1,10,"IMEI" (with the space between + and E and a restart at the evry time), you save me
Have a nice day

[Solved]Recovery mode error in A1 running marshmallow

I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
​ fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem

Thanks bro. Really helpful!

HI i got the new update ANDROID 6.0 MARSHMALLOW after i download successfullly when i prress restart and install .................it starts installing for few seconds then it gives error with dead android logo ....and restarts after some time and then it tells to download the update again ....i tried 3 times results were still the same every time...please help
also tried to side load manually.... ANDROID 6.0 ...after i click apply from sd card when it shows verifying system then it gives an error aborts the update ...and shows this
{system/priv-app/prebuiltgmscore.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
(MY PHONE IS NEVER ROOTED OR FLASHED OR HACKED)
(MY IS COMPLETELY CLEAN)
please help...

It means now u r on stock lollipop so root ur device and flash custom rom like cm12.1 and njiy
Sent from my Micromax AQ4501 using XDA Free mobile app

mashoodmasst said:
HI i got the new update ANDROID 6.0 MARSHMALLOW after i download successfullly when i prress restart and install .................it starts installing for few seconds then it gives error with dead android logo ....and restarts after some time and then it tells to download the update again ....i tried 3 times results were still the same every time...please help
also tried to side load manually.... ANDROID 6.0 ...after i click apply from sd card when it shows verifying system then it gives an error aborts the update ...and shows this
{system/priv-app/prebuiltgmscore.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
(MY PHONE IS NEVER ROOTED OR FLASHED OR HACKED)
(MY IS COMPLETELY CLEAN)
please help...
Click to expand...
Click to collapse
No need to root just unlock bootloader ,download Zip file of marshmallow .press power button+volume up for 3 sec,select apply update Zip and select that Zip file and that it .if any problem faced ping me.

Rexspidy said:
No need to root just unlock bootloader ,download Zip file of marshmallow .press power button+volume up for 3 sec,select apply update Zip and select that Zip file and that it .if any problem faced ping me.
Click to expand...
Click to collapse
If you done above steps that mean your build no. Is not appropriate for update update lolipop 5.1.1 to latest lolipop .

Mr problem is solved
Thank you all of you...I have successfully flashed my phone from Lollipop 5.1.1 to lollipop 5.1. After that within half-hour I got the update to marshmallow... Now I have nothing to worry about... Except one problem battery drains faster than usual. And heats alot...
So I switch my phone off for a while to cool down.,.. Thank you

mashoodmasst said:
Thank you all of you...I have successfully flashed my phone from Lollipop 5.1.1 to lollipop 5.1. After that within half-hour I got the update to marshmallow... Now I have nothing to worry about... Except one problem battery drains faster than usual. And heats alot...
So I switch my phone off for a while to cool down.,.. Thank you
Click to expand...
Click to collapse
Battery problem is çommon issue of marshmallow but your device is heating also take a serious look on thàt .by the battery problem will be solved on next update I hope and don't worry after using 2 weeks of the phone battery will automatically stable.

Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
​ fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
Didn't work for me

AAB4K said:
Didn't work for me
Click to expand...
Click to collapse
What error is coming still the dead logo??
Sent from my Micromax AQ4501 using XDA-Developers mobile app

Facing same issue, dead logo. Am on MM 6.0.1. April securty patch not getting installed. tried downloading zip and installing manually. still no luck.
error showing is
{system/priv-app/calendargoogleprebuilt.apk"has unexpected contents
E:error in /sideload/package.zip
status 7}
stock rom. not rooted

Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
If not wrong ur are missing something..
After dead android logo u have to press power button and then volume (up/down) didn't remembered exactly. Then only u will be taken to recovery mode. if on stock recovery
Other wise hitting recovery button only will take u to ur custom recovery.
Sent from my sprout4 using XDA Labs

harsh. said:
If not wrong ur are missing something..
After dead android logo u have to press power button and then volume (up/down) didn't remembered exactly. Then only u will be taken to recovery mode. if on stock recovery
Other wise hitting recovery button only will take u to ur custom recovery.
Sent from my sprout4 using XDA Labs
Click to expand...
Click to collapse
I hope that part how to go to revory known to all ,So I skip it.After Marshmallow first update it does not matter you are in Stock Rom or Custom Rom ,there will be no custom Recovery mode however how hard you try to flash CWM or TWRP .I tried in 3 handset,all given same result .So, I mention how to get to Custom Recovery in an optional way.

Rexspidy said:
I hope that part how to go to revory known to all ,So I skip it.After Marshmallow first update it does not matter you are in Stock Rom or Custom Rom ,there will be no custom Recovery mode however how hard you try to flash CWM or TWRP .I tried in 3 handset,all given same result .So, I mention how to get to Custom Recovery in an optional way.
Click to expand...
Click to collapse
I have rooted 2 Android one device after marshmallow. no problems at all.
using adb and unlocking Boot loader. But you have to reboot to recovery after flashing it.before rebooting system
Sent from my sprout4 using XDA Labs

harsh. said:
I have rooted 2 one device after marshmallow. no problems at all.
using adb and unlocking Boot loader. But you have to reboot to recovery after flashing it.before rebooting system
Sent from my sprout4 using Labs
Click to expand...
Click to collapse
Thats Quite interesting ,it never worked for me although I reboot in recovery first then system.After rebooting system whenever I tried Recovery mode I end up with stock recovery.Maybe some problem with flashing.

Rexspidy said:
Thats Quite interesting ,it never worked for me although I reboot in recovery first then system.After rebooting system whenever I tried Recovery mode I end up with stock recovery.Maybe some problem with flashing.
Click to expand...
Click to collapse
After 1st reboot do you get cwm Or twrp?
Sent from my sprout4 using XDA Labs

harsh. said:
After 1st reboot do you get cwm Or twrp?
Sent from my sprout4 using XDA Labs
Click to expand...
Click to collapse
Thats little funny, got dead android only.

Rexspidy said:
got dead android only.
Click to expand...
Click to collapse
It means u have not flashed recovery correctly.
if you need any help, PM me
or just reply me in thread only . (^~^)

Rexspidy said:
I myself faced this and if I am not wrong you are also facing this problem.
After upgrading A1 to marshmallow you will see there is no recovery mode in your device,when you start your recovery mode only there is dead Android boot animation.
Though u have tried many times to flash recovery like CWM But all in vain.
I have a solution for them,
After flashing the recovery.img file don't type reboot command just use the following command
​ fastboot boot recovery.img
It will bring you on recovery screen ,then install your desired Zip.
Every time you need recovery mode just connect it to pc in fastboot mode and type that command to your recovery mode.
This thread is for them who really facing this problem
Click to expand...
Click to collapse
LOL
When you see android bot logo, you are in recovery mode. But recovery menu options are hidden.
After you see the dead bot logo, hold power up for 5 seconds and then hit vol up (or hold both for 5 seconds) All recovery options will be visible after this.
Its a bad idea to use a pc every time you want to boot into recovery LOL

Hi guyz can anyone provide me stock recovery.img of build no. MOB30N PLZZ

recovery won't open

good day,
i have an HTC 10 factory unlocked, i had the bootloader unlocked through HTCdev. i then flashed the latest TWRP recovery, attempting to enter revovery....i cant. i din't get the triangle thingy what so ever,it jus displayed the screen like when you're about to enter bootloader mode. then it would restart after that, almost brick it cuz it didn't wanna boot at one pointing time :crying::crying: .i've rooted m7,8 & 9 and never came across something like that. i can't even flash over new rom cuz cmd is given error: can't open recovery. before i attempted bootloader unlock via htcdev, i tried sunshine jus to avoid the hassle and when it was attempting to give me temproot, it failed....3 times so that was useless,leaving me to go manual. any help on this?

Wrong thread. But sounds like recovery didn't flash. Make sure your flashing to recovery partition. Search thread for toolkit, will make it easier.

Fastboot flash recovery recovery. IMG @download mode

I used this tool to safely and successfully install ROM and Recovery.. Maybe you could try..
Thanks to the developer..
https://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520

Not sure if this helps, but I get the same type of issue when booting to recovery, except my phone is bone stock.
What works for me is right after the symbol comes up, press Vol Up and Power at the same time. If I time it right, recovery mode comes up. Not sure if it will work with TWRP, since I've never used it.
Sent from my htc_pmewl using XDA Labs

2WildFirE said:
Fastboot flash recovery recovery. IMG @download mode
Click to expand...
Click to collapse
that's what i did but still showing error:can't open recovery

[Guide] Returning back to Stock after flashing custom ROM

Seeing lot of users struggling while going back to stock due to one or the other needed feature on custom ROM missing, few of them are dual SIM not working, MTP, camera or others. Even if they come back to stock by restoring the stock the ROM via TWRP, sound is not working for many of them. I flashed recent LOS, RR, AOSP and returned back to stock without any problem. I made the traditional backup (yeah not followed the instruction of TWRP backup given in ROM thread ) I will quickly brief on the method. There are 2 methods for the same.
Method 1:
Before flashing the custom ROM
Boot to TWRP
Click on backup
You will bunch of options/partition to backup.
Select only - boot, data, system and vendor and no other partition. (can change the name of TWRP to the Date-Time-BXYZ)
Let TWRP finish the backup (time taken will depend on your data size)
Now again click on backup and this time select only - cust, prod and version (can change the name to Date-Time-others or a per your wish)
Flash custom ROM and enjoy
IF you face any issues and want to return back to stock, refer below.
Return to stock-
Boot to TWRP
Click on Wipe
Wipe System, Boot, Data
Click on Restore
Select the backup media (internal memory/external memory/USB etc)
Chose the 1st back up only i.e boot, data, system and vendor (Date-Time-BXYZ)
Chaneg the file system to F2FS (it was channged to EXT4 while moving to Custom ROM, remember )
Boot to system.
It should have all sound and other stuff working without any issue.
Method 2:
Use dload method to restore to full stock.
Link here - https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
In worst case If you have anything non working, like FM, theme etc, flash the small data file via TWRP.
Link here- https://forum.xda-developers.com/honor-6x/how-to/guide-solution-to-themes-fm-app-manual-t3712002
Try to use the same build number's file for this.
Good luck.

I have been trying to relock the boot loader on my honor 6x BLN-L24C567B365 with no luck. It has de factory rom on it, it has twrp an root installed (magisk). I tried the dload method with the same software version it has (BLN-L24C567B365), but i get "software install failed", I want to remove twrp, root, and afther that relock the boot loader. If i try to relock in the actual state, it boots in to fastboot mode, to boot correctly again i have to unlock again de bootloader. Can you give me some advice please.
Thanks in advance.

vcetina said:
I have been trying to relock the boot loader on my honor 6x BLN-L24C567B365 with no luck. It has de factory rom on it, it has twrp an root installed (magisk). I tried the dload method with the same software version it has (BLN-L24C567B365), but i get "software install failed", I want to remove twrp, root, and afther that relock the boot loader. If i try to relock in the actual state, it boots in to fastboot mode, to boot correctly again i have to unlock again de bootloader. Can you give me some advice please.
Thanks in advance.
Click to expand...
Click to collapse
Try flashing b360

shashank1320 said:
Try flashing b360
Click to expand...
Click to collapse
It worked!!!, thank you

Hey, I am currently on lineage and want to go back to stock. I really cant do it. It always fails or the download link is wrong. Can you help me?

Overmind123 said:
Hey, I am currently on lineage and want to go back to stock. I really cant do it. It always fails or the download link is wrong. Can you help me?
Click to expand...
Click to collapse
Model, build number etc please.

Overmind123 said:
Hey, I am currently on lineage and want to go back to stock. I really cant do it. It always fails or the download link is wrong. Can you help me?
Click to expand...
Click to collapse
Check all the files I have given in PM and share the results.

I tried going back to nougat from stable gsi linage os by using huru updater flasing via recovery and it resulted in a bootloop.
I can only enter the three options section -1-press power button to continue. 2- Volume up key to enter erecovery... and 3- The device will continue to boot after 5secs...
I cannot get into the erecovery at all, not even flashing another erecovery since I thought it was corrupted but no. I try to press volume buttons simultaneously with the power button and it doesn't work either. It also doesn't seem to stop rebooting.
I TRIED DLOAD and I had NO result but the same unstopping reboots.
Also I can ONLY enter that three options section by plugging in the device via pc while pressing volume up at the same time while plugging it in the USB.
Flashed recoveries for both nougat and oreo and never worked. I'm worried. Help please

evjgl98 said:
I tried going back to nougat from stable gsi linage os by using huru updater flasing via recovery and it resulted in a bootloop.
I can only enter the three options section -1-press power button to continue. 2- Volume up key to enter erecovery... and 3- The device will continue to boot after 5secs...
I cannot get into the erecovery at all, not even flashing another erecovery since I thought it was corrupted but no. I try to press volume buttons simultaneously with the power button and it doesn't work either. It also doesn't seem to stop rebooting.
I TRIED DLOAD and I had NO result but the same unstopping reboots.
Also I can ONLY enter that three options section by plugging in the device via pc while pressing volume up at the same time while plugging it in the USB.
Flashed recoveries for both nougat and oreo and never worked. I'm worried. Help please
Click to expand...
Click to collapse
Was dload successful?

shashank1320 said:
Was dload successful?
Click to expand...
Click to collapse
It wasn't I used DC Phoenix as last resort and fasttbooted the frimware

shashank1320 said:
Was dload successful?
Click to expand...
Click to collapse
Volume down and plugging in sync cable to computer won't put you in fastboot? Phone should be powered down and then this combo should get you adb access....