Dropped my phone too many times and now the power button doesn't work. I've been sliding out the keyboard to wake it up.
I tried using the CM9 'volume rocker to wake' feature but it doesn't seem to work most of the time. Specifically it only works when it's plugged in, or there is music/other app running in the background so I'm guessing my phone is sleeping too deeply to recognize it? is there a way to make it always work?
I've also had a few other deep sleep problems. Once in awhile my phone won't wake back up. After a night's sleep, I've had my phone freeze once the alarm activates (screen turns on and capacitive lights turn on but screen doesn't work and nothing helps except battery pull), this has also happened when I haven't used my phone in a little while and I get a phone call. Has anyone had this problem? It's especially horrible with my power button problem since I have no way to turn the phone back on after a battery pull without a charger on hand.
Finally, is there an easy way to fix the power button or should I just take it to Sprint?
Try reverting back to a stock rom or at least one based on stock and see if that works. If it doesn't then probably it's a hardware problem.
i can't get it into download mode to do anything (was originally going to revert to stock and take it to sprint). with the power button broken, i had to try adb reboot download and also reboot download with su from terminal emulator. both failed and just ended up doing a normal reboot...
anyone know how i can get into download mode to downgrade?
nvertigo said:
i can't get it into download mode to do anything (was originally going to revert to stock and take it to sprint). with the power button broken, i had to try adb reboot download and also reboot download with su from terminal emulator. both failed and just ended up doing a normal reboot...
anyone know how i can get into download mode to downgrade?
Click to expand...
Click to collapse
Use cwm to flash stock deodexed (using adb reboot recovery and the home button to select.
Sent from my Samsung Epic 4G using Tapatalk 2
for some reason the stock deodexed fc09 failed to install in TWRP. tried redownloading, no luck. can't find anythign about it in the thread, any ideas?
still can't get it into download mode either, and now i can't even turn it on despite having a charger. it just turns green and i haven't found any combinations that will turn it on.
nvertigo said:
for some reason the stock deodexed fc09 failed to install in TWRP. tried redownloading, no luck. can't find anythign about it in the thread, any ideas?
still can't get it into download mode either, and now i can't even turn it on despite having a charger. it just turns green and i haven't found any combinations that will turn it on.
Click to expand...
Click to collapse
Remove battery and sd card hit the power button a few times to make sure it is fully discharged. Plug into computer with battery out and try to get into download mode. Also make sure you are using a BB cable and not the stock one.
luckily I took it to sprint and they fixed it for free even though it was on CM...
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
I cannot. I have the battery of the phone out right now. As soon as i put the battery in the phone, it tries to reboot into recovery without me even pressing the power button. Then it again shuts off and tries to restart every 2-3 seconds.
Lawful123 said:
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just some additional info, I flashed CWM recovery through Rom Manager. After flashing it, it asked to reboot the phone. As soon as the phone rebooted, i started having this issue.
I'm in a similar situation. I used to be able to use the phone controls (power-home-Vol Up) to be able to go into recovery mode, but even that has stopped functioning. The only way to get the phone to boot normally after that is to pull battery, put the phone in download mode and then cancel download mode to boot up normally.
re: download mode
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I think the only way to get your phone into download mode now would be
to get a USB Jig from eBay or some online store.
They are under $5 bucks shipped.
Once you have that you would simply remove the battery from your
phone and then plug in the Jig before putting the battery back in.
The usb Jig is basically meant to be used for those
phones which will not go into download mode any
other way.
I have a Jig and as soon as it's plugged into the phone when the phone
is powered down it goes into download mode within 2-3 seconds.
Soon as its in download mode you can remove the jig and start a
clean Odin flash of the official stock firmware for your phone.
Good luck!
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
Thanks for that USB Jig suggestion. I guess that is my last hope.
Sent from my SM-N900T using XDA Premium 4 mobile app
Per suggestion from Misterjunky, I've now been successful in installing the Stock Tmobile 4.4.2 NB4 formware that I downloaded from sammobile. I used Odin 1.85 to install that on the Note 3. So far, the phone looks functional again.
So pressing power, vol down and menu doesn't get you into download? Have you tried holding them for at least 30 seconds?
I had this happen to me when I messed up flashing twrp. Pull the battery for 30 minutes, then put the battery in while holding power home and vol down.
That's what worked for me.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
I encountered the same issue after flashing CWM Touch to my SM-N900T (Note3-Aus) running Infamous Rom on the BioShock kernel. After being stuck in the loop for a fair while I removed the battery, went to grab a cup of tea before completely raging at the phone, went back and put the battery back in. The phone did not boot automatically this time, a good sign I thought to myself. I then went on to hold down VolumeDown + Home + Power to see if I could get into download mode. I successfully booted into download mode and selected the reboot option. My Note3 then went on to boot successfully. Hopefully this helps :fingers-crossed:
I recently had the same issue......heres step by step:
1. with the battery OUT, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. open kies. and at this point you'd want to restore back sto stock as follows:
4. go to tools, firmware upgrade and intialisation
5. follow the on screen direction and then just wait.
6. if you want to re root, then feel free to once the phone is up and running.
i have tried this method so many times and hasnt failed me yet. IF this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
I resolved the problem by flashing the phone back to T-mobile stock using Odin. In my case, the recovery was corrupted and hence the issue. After flashing back to stock, I was then able to root and install a TWRP recovery successfully.
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I'm having the same problem, what I do is take out the battery put it back in and try to turn on the phone on recovery mode, and it will give me the option to restart the phone. Hope it works
Same problem has happened to me, do you guys know if the jigs are universal? The ones I see on amazon and ebay dont list the note 3 at all so I just want to be safe. Since upgrading to nf9 the recoveries have given me major issues, TWRP was really buggy so I switched back to CWM and this happens.
Scratch that, just rebooted. I would still like to know if its universal though, in case this happens again. Doesnt hurt to be prepared
You're a life saver, Thanks a ton
atlzonly89 said:
i recently had the same issue......heres step by step:
1. With the battery out, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. Open kies. And at this point you'd want to restore back sto stock as follows:
4. Go to tools, firmware upgrade and intialisation
5. Follow the on screen direction and then just wait.
6. If you want to re root, then feel free to once the phone is up and running.
I have tried this method so many times and hasnt failed me yet. If this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
Click to expand...
Click to collapse
you're awesome, thank you so much
Note 3 (sm-n900w8) will not go into recovery mode after CWM Flash
Helllo Sorry if this is not in the proper place I have not had much experience posting.
my Phone is a Note 3 (sm-n900w8) Canada (rogers)
running Lollipop 5.0
base version n900w8vlu2doc4
kernel 3.4.0-4348112
[email protected]#1
build number ..... lrx21v.n900w8vlu2doc4
ap: n900w8vlu2doc4
I Flashed CF Auto root first (CF-Auto-Root-hltecan-hlteub-smn900w8.tar) All went well and I got root access
Then I Flashed CWM ( n900-cwm-recovery-6.0.5.0-kk_L5.0(0812)) and all seemed to go well but .. I could not get into
recovery mode. when I pressed vol up + Home + power key at the same time it went directly to download modes second screen..( the one that is ready for you to hit start on odin.) ...
I was able to reboot and try several times with the same result.
I then went and got the CWM app and tried to enter form there to only get stuck on the download mode without being able to reset.
then I flashed the CWM again and was back to being able to reset but not being able to get into recovery mode.
I updated CWM recovery setup from the app to the latest 6.0.4. and then tried to back up my current rom ... this let to a boot loop that said something like ..... Kernel is not seandroid enforcing...
once again I was able to get into download mode and had to re flash CWM and get back to my original problem ... not being able to get into download mode
Can anyone help me figure this out
Thanks
Hi my coworker has a sprint galaxy note 2 stock and not rooted. His phone shut down and when he started it back up it was stuck in a bootloop. I tried to flash the stock tar file via Odin and it failed. I don't think usb debugging has been checked in developing options, is their a way to fix this?
Thanks.
Andre
Have you tried using the (incredibly awesome) instruction set and downloads from Billard's (in)famous MC2 build?
http://forum.xda-developers.com/showthread.php?t=2086769
No but I'm going to try it now, I'll keep you posted.
Thanks.
Andre
Now I can't boot into recovery, I flashed twrp and it worked for a while and now it doesn't. I tried to refresh twrp but no luck.
Almost sounds like this could be a hardware issue.
By chance, does he have an extra battery? Or maybe another person in your office (or wherever you are with this) who can let him try their battery as a test? Last summer, my battery ballooned when I took a trip to Colorado up in the mountains (stock Samsung battery) and caused bootloops and just plain crashed my phone. Got a new Duracell from Batteries Plus ($40) and immediately fixed the "problem". You might want to see if he can try another battery next before attempting another software fix.
However, if that doesn't work, have you tried to immediately boot into recovery/download mode after turning on the phone? Then use odin to root/flash ROM/whatever you need?
1) turn off your device (pull battery "just in case" for 10 seconds too)
2) press this button combination: volume up, power button and home button. hold until download mode shows up
3) press volume up to enter the download mode (or volume down to cancel and reboot the device)
I guess that could be the problem. I tried Ballard's MC2 build but it didn't work it put the phone in emergency mode and I had to use kies to get it out of that and now I'm back to a bootloop and stock recovery. I think I'm going to try Philz recovery and flash from there
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Hm, I had this 2 month ago with a S4...
Same thing, I go to my provider he checked the Handy and said I have a defect on my Mainboard... He use dos tools for Handy analysis... I flash stock with Odin, too... Success but no boot...
CarHDRom V.27.3 by Carotix S6edge
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Docmjldds said:
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Click to expand...
Click to collapse
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
nyknight77 said:
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
Click to expand...
Click to collapse
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
Really appreciate your help here. Would flashing TWRP with odin trip knox? I'm afraid to flash anything not stock rom related.
Docmjldds said:
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
Click to expand...
Click to collapse
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
PS: Have you tried turning phone off. Then power on and then immediately hold the vol up home pwr buttons combo. That should also get you into recovery mode. But that said, I would still try my last.
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
He wants to keep stock. NOT a good idea
Docmjldds said:
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
Click to expand...
Click to collapse
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
nyknight77 said:
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
Click to expand...
Click to collapse
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
maxter55 said:
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
Click to expand...
Click to collapse
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
nyknight77 said:
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
Click to expand...
Click to collapse
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Docmjldds said:
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Click to expand...
Click to collapse
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think i would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
nyknight77 said:
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think I would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
Click to expand...
Click to collapse
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Docmjldds said:
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Click to expand...
Click to collapse
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
The only thing I can think of is that your setup is so corrupted you basically have no choice here. It's kind of the old adage about knowing it's important to occasionally back up the internal data, but just never get to it. I'm kind of paranoid to every now and then make sure I have copies of stuff around. I know it's zero solace for you, but without getting into recovery mode, there is no way to get to the Internal stuff that I know of. I'm assuming you never used smartswitch to backup or just use a computer to copy paste Internal stuff to a folder for saving.
HMMMM...Password:
ZiDroid.com
Try this stock Recovery. I found a post I made almost two years ago with a link to this file. Use the password to open the file and try ODIN again
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Docmjldds said:
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Click to expand...
Click to collapse
Really appreciate your help. I'm starting to think more that it's a bad battery now. Hope that's just it instead of the main board.
I left phone on charge for a few hours (constantly boot looping the whole time). I'm able to power off the phone by holding Power button and Volume down for 10 seconds. Screen is completely off, no boot looping.
Step1: When try to simply turn phone on by holding power button for three seconds, the first samsung galaxy s6 edge logo screen pops up but then goes away and phone looks to be off. Like it's trying to get power from the battery but can't.
Step2: If I keep holding the power button, that first logo screen would turn on and off as if it's a boot loop. If I let go, then phone is off again.
Step3: If I go into download mode and select Cancel (restart phone), it goes into boot loop with only first logo screen again. It loops until I hard reset by holding power button and volume down again for 10 seconds. Then phone is off. Same thing repeats if I go back to Step1 again.