Related
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
HuaweiG510 said:
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Thanks dear. It worked.
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
HuaweiG510 said:
Thanks dear. It worked.
Click to expand...
Click to collapse
If that worked U can press thanks :good: button
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
poirot13 said:
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
Click to expand...
Click to collapse
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
S34Qu4K3 said:
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
Click to expand...
Click to collapse
It happens the same to me, but I don't know how to do.
I'm a newbie and I'm not familiar with this command...could you kindly explain what I have to do step by step?
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
It works!!! You are simply a genius!
Thanks a lot. :laugh:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
hey man, ur posts in this thread were a real big help for me, i accidently wiped my stock recovey (dont ask ) and got stuck at the boot logo with nothing working at all and ofcourse froce updating wont work in apsence of recovery (put update.app on sdcard/dload bla bla)
so i downloaded the stock recovery you posted and flashed it via adb after i got my pc to see my device with ur combination back in post #10 (hold power and vol - buttons while plugged to pc) and everything went great
thanks for your help man, really can't thank u enough, thought my device was hardbricked
Mine doesnot work
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
I am using Huawei G 510-0200 in Pakistan. I had rooted my cell phone and was converting a user app into system app via Titanium backup. The process was taking long time so force closed Titanium Backup app. This caused phone crash and it restarted and hung up at huawei logo.
Now i tried factory data reset and clearing cache in Power and Volume + key mode. It did not work. I tried applying update (two different roms, one custom pakistani rom and other was normal g510-0200 rom) in the same mode but it shows installation aborted.
I tried Forced Firmware Update mode too. I placed update.app file in the sd card and restarted cell phone by holding Volume+, Volume- and Power key. In that mode, it shows unpacking Step 1/2 for a while and then instead of installing, it shows Update Failed.
Error log shows this:
filename = /mmc1/dload/update.app call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST CMD=0xf,moduleaddr = 0xd2000000, len_tmp=0x4000
I have tried everywhere and I'll be really greatful if you can sort this out for me. :crying:
hi
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Good bless you. It worked also for me. Thank you very muck , thank you thank you.
No luck.
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
when entered the command for original recovery its says 'error:cannot load recovery_original_flashable.img'
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello !!
Model Huwaei : Asceud G510 -- G510-0200
Problem : Stuck On Logo Flash Done
I Have Same Handset-Stuck On Huwaei Logo ! Already Flashed !!
With
HUAWEI-Ascend-G510-firmware(G510-0200,Android_4.1,Emotion_UI,V100R001C00B173,Normal,05011EUC)
Above File But Same Frimware Update Done !! But Sam Stuck On Huwaei Or Restart
Any Guidence- @ ?
please my p6 is stucked at bootloop and when i go to recovery it says unable to mount cache,plz any help
HI all,
I've asked this question on the firmware thread, but I do not have an answer. So I'm trying here.
I installed the new firmware without any problems. But after the reboot I'm stuck on the white screen with the green logo, and I do not have connection with the computer via fastboot (waiting for device). As against the phone is communicating with the computer by HTC Sync or Windows Explorer.
What can I do?
Thanks
ggreg said:
HI all,
I've asked this question on the firmware thread, but I do not have an answer. So I'm trying here.
I installed the new firmware without any problems. But after the reboot I'm stuck on the white screen with the green logo, and I do not have connection with the computer via fastboot (waiting for device). As against the phone is communicating with the computer by HTC Sync or Windows Explorer.
What can I do?
Thanks
Click to expand...
Click to collapse
How did you install the firmware?
Have you tried fastboot from the bootloader?
thanks clsA
For mike's method (re-lock the bootloader and fastboot) :
1.If you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
2.If you are S-OFF ---> no need to re-lock the bootloader.
3.Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
4.Re-name .zip file to firmware.zip
5.Open command prompt
6.Boot your device in fastboot mode (vol down + power ===> fastboot)
7.Connect device to the PC
8.In command prompt cd to fastboot.exe location
9.Make sure you have correct modeid and cidnum (type: fastboot getvar all)
10.Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
11.Type: fastboot oem rebootRUU and wait for device to reboot
12.Type: fastboot flash zip firmware.zip and wait for process to complete
13.Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
14.Type: fastboot flash zip firmware.zip and wait for process to complete
15.Type: fastboot reboot
Currently I have no access to the bootloader
Although the phone is stuck on the white screen it rings when they call me
Turn off the phone holding power button for almost 15seconds till completely shut down. Then hold volume down and power button. You'll be able to enter boot loader. Also provide more details...version firmware, rom, etc
Are you flash a fw twice ?
Try to unlock bootloader and recovery again brother
lennita said:
Turn off the phone holding power button for almost 15seconds till completely shut down. Then hold volume down and power button. You'll be able to enter boot loader. Also provide more details...version firmware, rom, etc
Click to expand...
Click to collapse
I can not. The only possible action is Power and he returns on the white screen.
c3scr33 said:
Are you flash a fw twice ?
Try to unlock bootloader and recovery again brother
Click to expand...
Click to collapse
Yes, twice. And it was ok. I do not have access to the bootloader
You don't provide enough details. But for me it seems like you flash firmware with stock recovery and if you have custom Rom the phone won't boot. Are you sure you are shutting down the phone properly? Then hold volume down for a second. Then WITHOUT release the volume button hold down power WITHOUT release anything till I boot to boot loader?
The phone vibrates once and nothing happens. Still the white screen.
hold power + vol up....if the phone reboots...hold vol down...
Alex-V you are THE GENIUS
Thank you very very very much :good:
ggreg said:
Alex-V you are THE GENIUS
Thank you very very very much :good:
Click to expand...
Click to collapse
nice that its working for you
I can't boot up my device it's have blink sleeping android error. (my device is ze551ml running WW_2.19.40.22 firmware and never ever ROOT!!! )
I tried hold power button and press volume up button but its doesn't work.
I also can't access to recovery mode too.
It's have the same blink error message and can't pass by hold power button and press volume up button.
Oh but i can access to fastboot page.
and my computer don't recognize my phone at all(i already install driver)
Before this problem happen I get in to recovery mode try to wipe cache but i miss press and i selected "apply update from adb"
and that time my phone doesn't connected with PC. I don't know what to do so I turn off my phone.
then I open recovery mode again and select wipe cache then I go out to take a bath.
I came back and see my phone is off so I boot it.
It's booting about 2-3 mins and nothing happen so i go to recovery mode again but this time they have problem like i explain before(blink error message that can't pass by hold power button and press volume up button)
So anyone have a solution for my problem. please I really need your help!
Sorry for my bad english
Hi,
I had this when I went to wipe my system cache and it failed. Your best bet, especially if you can't get into recovery is to fastboot flash the recovery again if you have an unlocked bootloader.
If you don't you'll want to unlcok the bootloader and follow the instructions for using ADB if you're new to it: http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
How can I unlock my boot loader when i can't even open up my phone.
stultus136 said:
How can I unlock my boot loader when i can't even open up my phone.
Click to expand...
Click to collapse
If you hold volume down and power, it should go to bootloader first, then you have your choices for recovery....Get it to the bootloader screen, then run the commands to unlock it...
Could you please tell me everything step by step on how to cure my phone?
I'm very noob.
okay thank you.
I can start it now
THANKS!!!!!!!
p.s. i use fastboot erase cache code
stultus136 said:
okay thank you.
I can start it now
THANKS!!!!!!!
p.s. i use fastboot erase cache code
Click to expand...
Click to collapse
Glad you have it working...It seems that wiping the system cache can be problematic at times - Perhaps it's a bug.
Same Problem
smokinjoe2122 said:
Glad you have it working...It seems that wiping the system cache can be problematic at times - Perhaps it's a bug.
Click to expand...
Click to collapse
Hey I'm having the same problem, how'd you get the computer to recognize that the phone was plugged in? My computer does not recognize that the phone is on when I have the flashing error screen, so ADB doesn't recognize that there is a device connected.
Hi,
I had the exact same problem, and I managed to boot up again thanks to you!
What I did :
Install ADB and Drivers
Boot my phone into Fastboot (Power+Volume Up at boot, keeping VolumeUp button pressed while booting). Don't go into any menu (do not select recovery or so). At this point your computer should recognize your Android phone when you plug it in through USB.
Open up a cmd with admin rights, navigate to adb install path by typing : cd C:\adb
Then type : fastboot erase cache
It should trigger an action on your device, and the prompt should display sth like "Cache successfully erased" (I don't remember exactly)
Finally type : fastboot reboot, press volume up while booting again, and access Recovery like usual!
Now you can try wiping your partition cache again.
Worked like a charm for me! Thanks a lot
Hi everyone,
yesterday I finally get my bootloader unlocked and I wanted to root my device, flash custom recovery and then flash CM13..¨
I found guide to root android 6.0 because I´m v20a, everything was fine, I booted to recovery via cmd command: fastboot boot recovery_image.img, but I forget to flash kernel and flashed only SuperSU and rebooted. After that I have a bootloop, adb not recognize my phone and LG Flash tool crashes with note: Required data not found. Contact your administrator..
I don´t know what I should do, please help me anybody.. :fingers-crossed:
PS: Sorry for my bad English I´m from Czech Republic..
Hello
Poweroff the phone.
Use key to start in Fastboot (Press Up and power button, release up button for 1-2 sec when LG logo appear and then push it again) and install the recover : fastboot flash recovery_image.img.
Start in recovery and flash CM13, you don't have to root the phone before doing this.
Regards.
same thing happened to me here
h811
flashed cm13
worked ok.. then flashed SUpersu via twrp
( and later found out that cm13 dont need supersu as it is already rooted )
Dumb A... of me!!
now i am in a boot loop cm13
i only see the cm13 boot animation.. and stuck there
phone wont take the :
Poweroff the phone.
Use key to start in Fastboot (Press Up and power button, release up button for 1-2 sec when LG logo appear and then push it again) and install the recover : fastboot flash recovery_image.img.
any clues... fastboot says wating for device...
i mean when i do the key combination
i still boot get in to the bootloop
fixed it
my phone did the same today, laptop wouldn't recognize phone after bootlooping.. I went to control panel, uninstalled the lg mobile usb drivers, then reinstalled the older drivers rom the internet .. lg up then immediately recognized my phone whilst connected in download mode I hit upgrade and flashed the kdz file.. and I now have a factory reset fully functional g4 hope this helps.
I'M USING HTC DESIRE 820 DUAL SIM INDIAN VERSION
DURING FLASHING MY PHONE GET REBOOT
AFTER THAT IT " WONT START
AND NOT SHOWING MY BOOT MENU
AND ALSO NOT CHARGING.
CHARGING LED IS ONLY BLINKING IN RED COLOR
PLEASE HELP ME
ANY SOLUTION FOR THIS PROBLEM
PLEASE HELP FOR AT-LEAST SHOW MY BOOT MENU. [/B]
I'M FOLLOW THIS STEP
PLZ HELP ME PLZ ANY ONE ...
Installation Step-1
1. Boot your phone to Bootloder [ Turn off phone , Hold power & vol down ]
2. [ON PC ]extract fastboot drivers install ADB and fastboot.exe
3. HOLDING shift open CMD to open CMD on that location
4. Enter command [fastboot reboot-bootloader ]
5. Command [fastboot oem lock ]
6. Now your bootloder get RE-LOCKED
FOR RE-LOCKING
ITS WORK PROPERLY
AND MY PHONE RE-LOCKED AFTER THAT
I FOLLOW SECOND STEP
1. Place the Downloaded RUU in the fastboot folder
2. Re-name it to "firmware.zip"
3. Boot the phone into Bootlodder [VOL DOWN + POWER]
4. Command
Code:
fastboot reboot-bootloader
5. Command
Code:
fastboot oem lock
If bootlodder is not Locked till now
6. Command
Code:
fastboot oem rebootRUU
7. HTC silver Logo will apper in a while
8. After you see sil [/ver logo
9. Command
Code: fastboot flash zip firmware.zip AFTER THIS STEP MY PHONE AUTOMATICALLY REBOOT AND NOT START ..
10. Progress bar will be display,wait until it gets done completely
11. Command
Code: fastboot reboot
12. Done reboot the system
PLEASE GUYS HELP ME ANY ONE ANY ANY SOLUTION FOR THIS .
AND HERE IS THE LINK FOR THAT I FOLLOW FOR FLASHING MY DEVICE
http://forum.xda-developers.com/desire-820/general/solved-solution-software-update-option-t3269290
Help
I'm also having the same problem...
c4m3rl3ng0 said:
I'm also having the same problem...
Click to expand...
Click to collapse
any solution for this plz suggest me
Fixed
rishisingh0004 said:
any solution for this plz suggest me
Click to expand...
Click to collapse
Idk how or why or anything...
But my issue is solved..
My Phone booted up on it's own :angel:
c4m3rl3ng0 said:
Idk how or why or anything...
But my issue is solved..
My Phone booted up on it's own :angel:
Click to expand...
Click to collapse
Tell me anything that u do ..anything even little thing plz tell me
rishisingh0004 said:
Tell me anything that u do ..anything even little thing plz tell me
Click to expand...
Click to collapse
I Didn't do anything!
It turned back on, on it's own!
Now I tried to boot into recovery mode again and i have the same issue now...
It's not turning on!
I hope it'll turn back on again on it's own!
But any other solutions will be really helpful!
---------- Post added at 08:46 AM ---------- Previous post was at 08:38 AM ----------
rishisingh0004 said:
I'M USING HTC DESIRE 820 DUAL SIM INDIAN VERSION
DURING FLASHING MY PHONE GET REBOOT
AFTER THAT IT " WONT START
AND NOT SHOWING MY BOOT MENU
AND ALSO NOT CHARGING.
CHARGING LED IS ONLY BLINKING IN RED COLOR
PLEASE HELP ME
ANY SOLUTION FOR THIS PROBLEM
PLEASE HELP FOR AT-LEAST SHOW MY BOOT MENU. [/B]
I'M FOLLOW THIS STEP
PLZ HELP ME PLZ ANY ONE ...
Installation Step-1
1. Boot your phone to Bootloder [ Turn off phone , Hold power & vol down ]
2. [ON PC ]extract fastboot drivers install ADB and fastboot.exe
3. HOLDING shift open CMD to open CMD on that location
4. Enter command [fastboot reboot-bootloader ]
5. Command [fastboot oem lock ]
6. Now your bootloder get RE-LOCKED
FOR RE-LOCKING
ITS WORK PROPERLY
AND MY PHONE RE-LOCKED AFTER THAT
I FOLLOW SECOND STEP
1. Place the Downloaded RUU in the fastboot folder
2. Re-name it to "firmware.zip"
3. Boot the phone into Bootlodder [VOL DOWN + POWER]
4. Command
Code:
fastboot reboot-bootloader
5. Command
Code:
fastboot oem lock
If bootlodder is not Locked till now
6. Command
Code:
fastboot oem rebootRUU
7. HTC silver Logo will apper in a while
8. After you see sil [/ver logo
9. Command
Code: fastboot flash zip firmware.zip AFTER THIS STEP MY PHONE AUTOMATICALLY REBOOT AND NOT START ..
10. Progress bar will be display,wait until it gets done completely
11. Command
Code: fastboot reboot
12. Done reboot the system
PLEASE GUYS HELP ME ANY ONE ANY ANY SOLUTION FOR THIS .
AND HERE IS THE LINK FOR THAT I FOLLOW FOR FLASHING MY DEVICE
http://forum.xda-developers.com/desire-820/general/solved-solution-software-update-option-t3269290
Click to expand...
Click to collapse
Bro try this.. it worked for me !
1. Unplug the phone from the charger.
2. Press the power button 10 times at 1 second intervals to discharge it.
3. Now hold the power button for 16-30 seconds until it turns on.
4. Charge your phone properly even If it says phone is charged.
Hope this helps.
c4m3rl3ng0 said:
I Didn't do anything!
It turned back on, on it's own!
Now I tried to boot into recovery mode again and i have the same issue now...
It's not turning on!
I hope it'll turn back on again on it's own!
But any other solutions will be really helpful!
---------- Post added at 08:46 AM ---------- Previous post was at 08:38 AM ----------
Bro try this.. it worked for me !
1. Unplug the phone from the charger.
2. Press the power button 10 times at 1 second intervals to discharge it.
3. Now hold the power button for 16-30 seconds until it turns on.
4. Charge your phone properly even If it says phone is charged.
Hope this helps.
Click to expand...
Click to collapse
Not working for me, still led blinking when plug in, no fastboot menu, no turn on.
All combination power+ up, down not working for me
HELP PLEASE