I'm looking to have access to the Blackstone phonebook when I connect it in rSAP mode to my Audi MMI.
Because I dont have the very brand new MMI with harddisk navigation and new integrated phone) I can only select numbers from SIM card.
Any comments/suggestions?
I've got an Audi A6 and I use software from jetwaremobile.com to sync my HTC with the MMI.
First try to install the demo version and then look for a config file that lets you SWITCH PHONEBOOKS (between SIM and Outlook).
In my Audi I've got to sync the Outlook Phonebook, Incoming/ Missed/ Outgoing calls and signal strenght.
NOTE: Do not try the AUDI MMI configuration that appears on the web page. It's not necessary and doesn't work.
Mode Handsfree vs. rSAP
thx for your answer.
It sounds to me you are connected in "handsfree mode" - could you check the small sign at the MMI display?
Should show 2 x symbols (1 bluetooth-symbol and 1 signal bar symbol) - right?
I have got the same issue with my VW Passat. It worked fine with Nokia phones, but I also cannot get the phone book over SAP with Win Mob. Tried all version patches etc. But have not been able to find a solution.
The work-around: Copy the needed contacts to your SIM, hide SIM contacts in the phone and let the car sync with the SIM card. It is not the best solution but at least it works.
Grtz Remko
Teh reason why...
The reason is the use of a proprietary use of a Nokia phone unit in the car of VAG in the past.
All new cars are able to communicate in the right way of bluetooth..
(I tried it successfuly with my HTC Touch HD and a brand new A6 - all worked perfect!)
Did you use the "Handsfree" profile in the Audi, cause I know this works fine? I've tried this with a few rentals.
The problem arises as soon as you want to connect using the Bluetooth SAP profile. In my Passat I have no other option as SAP and I actually like this function, just this phone book issue...
Handsfree
I dont like "Handsfree" because I have to use my inbuilt phoneunit of my Audi - and so I need the SIM access- Biggest advantage is the us of an external antenna with very strong signal.
Nobody else with a hint?
OldFellow said:
thx for your answer.
It sounds to me you are connected in "handsfree mode" - could you check the small sign at the MMI display?
Should show 2 x symbols (1 bluetooth-symbol and 1 signal bar symbol) - right?
Click to expand...
Click to collapse
Sorry for the delayed answer.
Yes I've got two symbols, the bluetooth and the signal bar.
I realized that symbols on MMI depends on the implementation of the bluetooth protocol of the phone. For instance, with sony-ericsson I used to have bluetooth, signal bar, SIM entrys (not phone contacs), incoming, outgoing, missed calls, etc.
But with Motorola the only thing I used to get was the bluetooth symbol (no contacts, calls, etc.)
This is exactly what happend when I first connected my HTC, so I searched for a solution. Since I have JetweareMobile I've got the same features than with sony-ericsson, and even more, because I can sync both SIM and PHONE contacts.
It's nicely resolve because when you toggle to PHONE CONTACTS, you get your contact's names in the MMI with a /W, /H and /M for work, home and mobile numbers (you may have several numbers per contact)
If you have the bluetooth car kit and you're having problems, give it a try.
Same result without jetwaremobile.com
ok pitaXDA - thx for your answer.
So I was right - your are using the HTC in "Handsfree" mode - this works fine with the standard Bluetooth Software installed on the HTC - you will not need this extra peace of software.
I don't like the handsfree-mode, because it only uses the Bluetooth connection for the phonebook.
I'm using the rSAP mode - because I want to use the external phone antenna of my A6 and also the phone funtion at the HTC is disabled (like Airplane mode) to save power. The disadvantage for me is the use of phonenumbers stored on SIM only (there is no synch of the "normal" phonbook in that mode)
Greetings for the new year folks !!!
I have an X50v upgraded to WM6 ROM.I linked it to a Rocketfish bluetooth headset RF-MAB2.
Initially everything ran smoothly.
Now I used the old pairing information to reconnect and it says something like " cannot connect to the headset ..authentication failed " . I removed the pairing, put it in pairing mode again ( the BT Headset ) and then tried to connect again - with the same pin 0000 - same problem.
Soft reset ..same problem.
Whats happening ..all of a sudden why did it refuse to connect .
Did anyone run into the same problem with any headset...
Dear all,
My HTC Desire is now 15 months old, and still works as new. No, better than new since it's rooted and faster.
Coming to the problems:
My car has a bluetooth feature to stream music from the phone, and to take and make calls. Bluetooth music streaming works perfectly, and I can skip songs using the car controls.
I am facing the following issues with the "Phone Connect" feature when I pair the Desire:
After any and every incoming or outgoing call is completed, I get a pop up on the screen which says "Fatal Exception..." and I can only force close from here. When I force close, the signal strength icon shows a cross and all connectivity is lost for sometime, including BT: car says "phone disconnected". After a while the signal strength comes back and BT can be reconnected.
So basically I have to repeat this process everytime I make or answer a call via the car BT feature. Needless to say, it's a PITA.
I am guessing this is a problem to do with the radio or kernel of the phone. Not sure which. Please confirm this, and guide me to a radio or kernel file which may solve this issue.
My second problem has to do with the phonebook feature of the car. It can pull the contacts, the recently dialled numbers, recently received numbers, and missed calls. Only in the Desire it doesn't.
The phonebook feature can only see the contacts in the SIM card.
The recently dialled, received, and missed calls don't work. Numbers only show up on the car list if I have made/answered/missed a call while connected to the car BT.
The only feature that works as it should is redial.
As I am told, all Nokia models work perfectly on the same car model, and since we own a 'smart'phone, not to mention an Android, we should be able to get it to work however we want it to.
Any fixes for this one?
Thanks in advance.
PS. If you want the exact error message thrown by the phone after taking/making a call, I can write it down and get back to you afterwards.
BUMP!
Please help, guys!
I have Range Rover with an on bluetooth working handsfree telephone set, but when i'm trying to connect my Htc Desire HD with it. it wont sync all my contacts. im able to call people but then i have to type in the whole number
please help me
Does somebody know how to sync my contacts with the car?
Have you tried rebooting the car?
no i havent. i will try and see if that works. thanks
Good morning,
I've a problem with miui 7 (6.6.3) and car bt.
When I use Google voice, in the car start a whistle for about 10 seconds even if the communication is ok, and this is the major problem, if I try to compose one phone number from the car audio (the model is a Kenwood ddx6023bt) the feedback from the radio is "dial error".
These are rom bug because if I use the s.voice (official firmware 4.3) I'haven't any problem.
Could you help me as relsolve the problem? I could also install another rom... ( I tried 7.1.2 but, is a my opinion, isn't reactive).
Thanks!!
Nobody could help me?