Q&A for [ROM][CM-11][4.4.4][Unofficial] Huawei Ascend P1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
phone boots in recovery mode when turned off
hi, i flashed the cm11 rom last week and it works great, nice work! i have just one problem, when i turn off my huawei ascend p1 it goes into recovery mode... do you know how to fix this? (the recovery i am using is CWM touch v6.0.3.9 by Urmet77) thank you!
HELP ME
i'm using cwm and somehow somewhere something went wrong
I followed the instructions (though I pressed backup when the sd card wasn't in, i think thats the problem) anyway i flashed the ROM (when you say flash ROM which zip am i supposed to install in the thread there are two, latest build and previous build)
and then it said bad/error and then I continued anyway and rebooted and then it gets stuck in huawei logo.
I should try and do everything again right?
HEEELPPP
I have a few questions
Hey guys, so I'm on stock 4.0.3. Will I be find upgrading to this? And also, is there a tutorial anywhere to follow?
Hi! Sorry about the post here! Which custom rom is good to U9202L-1 (P1 LTE). Can't find on internet. Thx! Regards from Hungary!
Swap support
Hi,
Does the kernel support memory swap? I'm trying to set up swap in my device but fail.
---------- Post added at 11:07 AM ---------- Previous post was at 10:53 AM ----------
Turankushu said:
Hi,
Does the kernel support memory swap? I'm trying to set up swap in my device but fail.
Click to expand...
Click to collapse
I'm using cm11 by Spanorg on my U9200
---------- Post added at 11:20 AM ---------- Previous post was at 11:07 AM ----------
DnA Developers said:
hi, i flashed the cm11 rom last week and it works great, nice work! i have just one problem, when i turn off my huawei ascend p1 it goes into recovery mode... do you know how to fix this? (the recovery i am using is CWM touch v6.0.3.9 by Urmet77) thank you!
Click to expand...
Click to collapse
I'm also having same problem. Its not big deal but will be very nice if the phone could be really off when turned off.
Can someone help me in installing TWRP in Huawei Ascend P1
p1
Υπάρχει περίπτωση να βάλεις οδηγό στα ελληνικά για να σου κάνω και δωρεά;
I am facing the logo freeze issue after flashing the internal sdcard as primary zip. Does anyone know the solution?
mobile data
mobile data wont work im trying to connect to the internet
(U9200) Plz help CM11. Browser, Playstore and others constantly crash
Hello,
last night I tryed to upgrade the Ascend p1 (U9200) to 4.4.4 Kitkat. The main reason for this is to get "ok google" since it doesnt seem to be available for ICS. Unfortunatly it does not work right (see step13).
For > 8 hours I researched most tutorial pages regarding rooting, flashing, upgrading and gapps. I think I now know about the basics but I still have questions I couldn´t find the answers to (plz see below).
Here is what I did:
got TWRP from Appstore but couldn´t use it. Root required.
Installed adb-setup-1.4.2.exe to C:/adb from http://forum.xda-developers.com
downloaded twrp-2.7.1.0-viva-by_SPanorg.zip and unpacked into C:/adb
downloaded cm-11-20140715-UNOFFICIAL-viva.zip from http://forum.xda-developers.com
followed the instructions to root here: http://forum.xda-developers.com more specific: "Gain root access (Works on ANY Huawei stock firmware. Inspiration taken from arkedk's thread)" steps 3. - 9. (but C:/adb/ without the full SDK)
started into "twrp recovery"
wiped -Cache -Dalvik -Data/Factory Reset -/System
followed this sideload tutorial: http://forum.xda-developers.com with cm-11-20140715-UNOFFICIAL-viva.zip from step 4. but wiping cache and dalvik again.
rebooted and kitkat installed correctly (no gapps) (camera not working)
shut down and started into "twrp recovery"
followed this sideload tutorial: http://forum.xda-developers.com with pa_gapps-modular-nano-4.4.4-20150221-signed.zip (http://forum.xda-developers.com) from step 4. to get gapps
It installed right, rebooted to kitkat ... nice!
tried to add google account and hell broke loose. Browser closes immediatly. Playstore crashes when downloading apps. Various apps crash.
I actually managed to download and start whatsapp but it keeps telling me to shut off the usb-drive or usb-cache (its in german USB-Speicher)
I have a feeling that the software constantly wants to write somewhere else then the internal sd-card. Also whatsapp tells me when trying to view a picture that there isnt enough free space. But it has 2GB free!
Unfortunatly I dont have a SD Card, thats why I useed the sideload procedure.
Where did I go wrong and is it normal that the CM11 on ascend p1 works that badly?
Does anyone have a suggestion what I could try?
reading this http://forum.xda-developers.com/ more specific "Install/flash stock or custom recovery. (Root not required.)": I am not even sure if I even had to root?
Is CM 10.2 more reliable? Should I give it a try?
I am looking forward to your help, tips or critique.
Also congratulations on your amaizing work on all the free tools, CMs, tutorials and support you are doing here.
How to access internal storage?
Hello sir I flashed CM on my Huawei p1 but now I can't access my internal storage. Any help?
I have also flashed sd permission and else plz help me...
Bluetooth pairing with CM 11 on Huawei P1
Hi,
Now I switched to CM 11, but the problem is the same.
I'm trying to pair my BT Wristband.
The wristband is showed
after pointing on it, it shows "pairing" for some seconds and then I get the following:
"Pairing mit Power Watch war nicht möglich, weil die eingegebene PIN oder der Schlüssel falsch war"
Means: Pairing is not successfull cause the key or PIN is wrong.
But I am not prompted to key in the PIN.
Any help
THEGOTCHI
How I install twrp recovery on my p1
I am totally new can you help me for installing twrp and unofficial ROM plz admin
How I install twrp recovery and custom rom on my p1
I have huawei p1 b336 how do I flash KitKat ROM and twrp.I am totally new
Please help me spanorg.
can not connect to PC
Hi people, I'm new in the forum.
I just installed CM11 on my Huawei Ascent P1.
Everything works good, but sometimes (i don't know why) all of my contacts disappear from my phone and google account.
But my main problem is that my PC with Win7 64bit can not see my connected phone via USB (to try to sync my contacts).
U9200 driver is unable to install... View attachment 3247207, the newest HiSuite is also installed.
Where can I start to resolve this problem, any idea?
Hey pgyz how you flash cm 11 in p1? Plz I also want to .nd driver error ? Nd if you want your contact back you can copy your contact.vcf file in your SD and then install that backup on your contact. Go to contact-option (= boton) - import from sd-chose your file
Sent from my U9200 using XDA Free mobile app
Installing of custom rom
Hello, I'm new on this and I have some questions.
1/ Do I need to root the phone before installing this rom?
2/ How do I install the TWRP 2.7.1.0?
huawei p1 u9200
Friend, install mod room cyanogend spanorg 11 android 4.4.4 and install your recovery twr 2.7. but when I turn off my phone and connect the charger to charge battery put off because it opens my only way to recover all your options. the truth is a risk that this well. any to reset or something not nice in the team .. ayudammmeeeee please with that spy on Venezuela. this very good functional room totoalmente great detail just that .. thanks .....
jeancsilva21 said:
Friend, install mod room cyanogend spanorg 11 android 4.4.4 and install your recovery twr 2.7. but when I turn off my phone and connect the charger to charge battery put off because it opens my only way to recover all your options. the truth is a risk that this well. any to reset or something not nice in the team .. ayudammmeeeee please with that spy on Venezuela. this very good functional room totoalmente great detail just that .. thanks .....
Click to expand...
Click to collapse
problem: your phone boot's automaticly in recovery mode when plug in your charging cable ??????
It's an emergency funktion for dev's I think. Your phone has to be turned on before you plug in the charging cable. On my phone it's the same and I don't have any problems with that, because my phone is always turned on. If you want to charge your phone whilee battery is emty, you have to plug in the cable (boot's auto. into recovery) and than you have to wait a few (5-10) minutes. Than plug the cable out and reboot to system. After reboot plug the cable again in and wait while your phone is charging.
Related
hi guys ! im a noobie with android my last phone was a iphone so..anyways im french too so excuse my english.. so here i got a ZTE N762 From Public Mobile (montreal) and i CANT ?&%$*(? Root my cellphone....i've try unlock root no succes..(failed to get shell root access) anyways ive tried many other forums and all of these sent me here and i not familiar with flashing rom and all these things......so please help me!!!! im pissed off about easy wifi and many more!!!
so here's my question how can i root my phone and does public mobile can prevent me to root my phone?
anyways here's the details about my phone
ZTE N762 (Public Mobile)
Version 2.3.5
Baseband N760b01
Noyau 2.6.35.7-perf+
[email protected]
build n752v1.0.0b08
chazzy1656 said:
hi guys ! im a noobie with android my last phone was a iphone so..anyways im french too so excuse my english.. so here i got a ZTE N762 From Public Mobile (montreal) and i CANT ?&%$*(? Root my cellphone....i've try unlock root no succes..(failed to get shell root access) anyways ive tried many other forums and all of these sent me here and i not familiar with flashing rom and all these things......so please help me!!!! im pissed off about easy wifi and many more!!!
so here's my question how can i root my phone and does public mobile can prevent me to root my phone?
anyways here's the details about my phone
ZTE N762 (Public Mobile)
Version 2.3.5
Baseband N760b01
Noyau 2.6.35.7-perf+
[email protected]
build n752v1.0.0b08
Click to expand...
Click to collapse
I had one of those before and i rooted foloing these steps
http://www.4shared.com/rar/UAfQldwH/Android_SDK.html
1- Download the link above.
2- extract android sdk folder to c:\. And take the recovery.img file out of the folder and also put it in c:\.
3- open a command prompt (open with admin if using windows
vista/7)
4- navigate to your android sdk folder
5- put your phone in android bootloader interface by turning it on
and IMMEDIATELY PRESSING VOLUME DOWN AND MENU
TOGETHER UNTIL PHONE LOOKS FROZEN.
6- plug your phone into your pc, driver can be found in the
android sdk folder
7- in your command prompt enter: fastboot flash recovery c:\recovery.img (do this twice, for some reason it needs
to be done twice to stick)
8- type fastboot reboot
9- now when you turn your phone on in recovery ( turn on while
pressin volume up and menu) you will get the clockworkmod
recovery.
B08 clockwork backup:
http://www.4shared.com/archive/qULzmkkr/2012-03-09045800.html
To root your B08 device:
1- Before you begin, make a backup of your system with
clockworkmod. It's free!
2-:
http://www.4shared.com/zip/bsGwcWTS/Superuser_Installer_XDA.html
Simple root:
The superuser installer brought to you by Bluntman420. Put this
file in your sd card and install it with clockworkmod using the
install zip from sd option. Done!
B08 voltron rom
http://www.4shared.com/zip/_Vdjgi6T/N762_B08_VOLTRON_rev4.html
Added features: - b08 compatibility
- flash player support (sorta)
- full browser instead of mini
as always all optional apps are removable and base system has been kept light. Enjoy!
lemyster also made a few roms in backup form:
http://www.4shared.com/rar/xS5uhA3n/BC_420_n762_B08_rev5_Linux.html
http://www.4shared.com/rar/Ye_RBl9I/BC_420_n762_B08_rev5_Ubuntu.html
http://www.4shared.com/rar/rFcvFC3Z/BC_420_n762_B08_rev5_BackTrack.html
http://www.4shared.com/rar/4-krCEgt/BC_420_n762_B08_rev5_Windows7.html
http://www.4shared.com/rar/SlfWcnU8/BC_420_n762_B08_rev5_IPhone.html
all roms and backups are pre rooted unless it is specified that they are stock.
backups are different... to install them you must extract the folder on the rar file to sdcard\clockworkmod\backup\ and then in clockworkmod use the restore option.
that comes frrom here: http://nolochemical.kodemind.com/rooting-zte-n762
and everything was posible thanks to smartmanvartan r.
good luck.
Can anyone explain which is the Menu button? What is clockwordmob, clockwork back-up, To root your B08 device and all these ROMs for?
Thanks just wondering if it will work with building b10
Sent from my N762 using xda app-developers app
B10 devices
can anyone confirm if the b08 clockworkmod recovery works with the zte n762 b10 devices.
Yes the clockwork mod works via the instructions i installed it on a b10 myself no.problems
Sent from my N762 using xda app-developers app
MD5 mismatch
B08 clockworkmod worked fine and so did SU install on B10 device. But when trying to flash custom firmware I get :"checking MD5 sums...MD5 mismatch!". Android boots fine, is rooted and was able to uninstall unwanted system apps. Thanks again to everyone here at XDA that makes flashing pleasant and relaxing :victory:
ZTE N860 Public Mobile (Montréal)
Could that work with my ZTE N860 ?
Here's my phone specs:
ZTE N860
PMI_N860
2.6.35.7-perf+
[email protected]
GB_PMI_N860V1.0.0B08
I could not find anywhere how to do it.. I tried using the same way as the N762 but I does'nt seem to be able to acces the Bootloader Interface.
When trying to access it the screen goes black with a white box where u can read FTM.
If I leave it there and plug the usb to my laptop and then run the FASTBOOT FLASH RECOVERY C:\RECOVERY.IMG is says waiting for device... nothing else happen... What do I miss ? I am pretty noob to rooting .. I already suceed but years ago with a motorola Backflip form Telus but now everything seem different with Public Mobile.. Anyway if anyone could help me I would be so thankfull
Thank in advance
Skampy4ever said:
Could that work with my ZTE N860 ?
Here's my phone specs:
ZTE N860
PMI_N860
2.6.35.7-perf+
[email protected]
GB_PMI_N860V1.0.0B08
I could not find anywhere how to do it.. I tried using the same way as the N762 but I does'nt seem to be able to acces the Bootloader Interface.
When trying to access it the screen goes black with a white box where u can read FTM.
If I leave it there and plug the usb to my laptop and then run the FASTBOOT FLASH RECOVERY C:\RECOVERY.IMG is says waiting for device... nothing else happen... What do I miss ? I am pretty noob to rooting .. I already suceed but years ago with a motorola Backflip form Telus but now everything seem different with Public Mobile.. Anyway if anyone could help me I would be so thankfull
Thank in advance
Click to expand...
Click to collapse
Go check out androiforums.com and check out the public mobile n860 all things root section.... everything you need over there...
What Drivers? Where?
Where do I place the supplied drivers that come with Android sdk? Do I leave them in the folder? Do I put them in Win32?
A little more clarity would be usefull.
thanks in advance!
Download mode?????
IMMEDIATELY PRESSING VOLUME DOWN AND MENU
TOGETHER UNTIL PHONE LOOKS FROZEN. Having a very hard time getting into download mode on my ZTE Z796c. I can get into Recovery no prob. Any suggestions?
Help
Hi i just started using this forum and i not that tech savvy but i know enough about root because i rooted my tablet i while back but that program was stricktly for that tablet so please bare with me. My problem is the easyclockwork. i instaled it exactly like you said but when i boot as recovery on my N762 the volume key do not seem to move the highlights the only button that seems to work is the power button when i access recovery mode. but when im on normal mode my volume keys work just fine. please help me. this is the only problem i have encountered till now. Please and thank you
N762 still kickin
Hey smartmanvartan, I have been fooling around on my moms ZTE lately and I was wondering if you still had any of those lightweight roms lying around somewhere. Most of the links I have found are dead. I was able to root it with your clockworkmod recovery.img and tried the b08 rom and everything went haywire after it updated a few apps. It ended up softbricking until I found another live link for a b10 unroot and stock install on the android forums. I was wondering if you would have anything available, thanks in advance.
Yeah i should have it lying around somewhere... im out of town till saturday but ill post a link when i get back
Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.
I tried what you say but no thing happened .
I have alcatel one touch snap
Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega
Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english
weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported
Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:
Hi all.
Is possible to port or create any custom rom for this device?
Thanks
Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.
root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...
please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????
EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards
jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.
EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?
jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.
Q&A for [ROM][5.1] Candy 5 - Hercules [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1] Candy 5 - Hercules [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hello there,
Has anyone tried to take a picture with flash on?
i'm using candy 5.0 and anh my phone will reboot immediately when ever i take picture with flash on...
chjcken12 said:
hello there,
Has anyone tried to take a picture with flash on?
i'm using candy 5.0 and anh my phone will reboot immediately when ever i take picture with flash on...
Click to expand...
Click to collapse
You are the first to report this issue.
The latest is Candy5 v2.1.0 in Post #2 (Android 5.1.1). Try the latest and clean flash. If it still does this, I need logcat logs showing the problem if I'm going to have any chance at fixing it. Paste a log on Pastebin.com and link it back here.
OK, I installed the last version (5.1.1 from 20150422) and everything seems to be working, at first boot I had no signal at all so I restarted my phone... and no signal.
Rebooted to recovery and installed Zero Gapps from slim, reboot system, no signal
The I attempted to add my google account and after conecting my phone to the wifi it got signal, went to APN config and my companies APN is there, Data seems to work OK, phone and messages works as well
Connect my phone to wifi seems to solve the problem
Thanks Dan!
NoSpamDan said:
You are the first to report this issue.
The latest is Candy5 v2.1.0 in Post #2 (Android 5.1.1). Try the latest and clean flash. If it still does this, I need logcat logs showing the problem if I'm going to have any chance at fixing it. Paste a log on Pastebin.com and link it back here.
Click to expand...
Click to collapse
thanks for always support your user
i tried a third-party camera app, and that camera app work fine with flash on, while stock camera still has that problem,
now i will try to update to candy 5.1
data not working.
I like the rom but data not stable. I did a clean install. If wifi turned off I lose mobile. but am looking forward to this rom i love my s2
same here dont have wifi
same here dont have wifi
hillinsf said:
I like the rom but data not stable. I did a clean install. If wifi turned off I lose mobile. but am looking forward to this rom i love my s2
Click to expand...
Click to collapse
mickeymichael said:
same here dont have wifi
Click to expand...
Click to collapse
This is an issue affecting many devices on LP5.1. I believe it is upstream and will get fixed in due time...
hello NoSpam Dan
i connect my phone to PC and choose Mass storage but only my 2GB SD card showed up in My computer window, neither internal storage!
Can you guide me to make the internal storage connect to my PC?
sorry for my bad english, hope you understand what i say
USB ?
I did clean install with new build , the data is much better but... when i try to enable usb it wont give me a menu when i enable it in developer then go to storage and press the settings it shows usb connection and i click it and no menu , the rom is great but really need the usb to work for daily driver , almost there
chjcken12 said:
hello NoSpam Dan
i connect my phone to PC and choose Mass storage but only my 2GB SD card showed up in My computer window, neither internal storage!
Can you guide me to make the internal storage connect to my PC?
sorry for my bad english, hope you understand what i say
Click to expand...
Click to collapse
Can you mount storage in recovery mode?
Check your Device Manager carefully for Nexus or ADB devices (if you're on Windows). If you find something like this, try to change it to a USB Storage Device.
NoSpamDan said:
Can you mount storage in recovery mode?
Check your Device Manager carefully for Nexus or ADB devices (if you're on Windows). If you find something like this, try to change it to a USB Storage Device.
Click to expand...
Click to collapse
i cant find anything like you said, it just an Android CompositeADB Interface i installed recently for android app debugging..
can you tell me more detail about this issue
chjcken12 said:
i cant find anything like you said, it just an Android CompositeADB Interface i installed recently for android app debugging..
can you tell me more detail about this issue
Click to expand...
Click to collapse
Sometimes you can right click that ADB interface and choose "Update driver". Then select manual and choose USB Mass Storage Device.
Depends on the drivers you are using. I haven't changed the connection methods, but that doesn't mean they haven't changed somewhere in the upstream code...
Nice rom but vibrating and does not turn on after restart
I installed in on cwm 6.0.2 and worked eith bugless and smooth i inserted sim it asked to restart and i restart and then it turn on at samsung and then vibrates every second then reboots every time.I don't think that at time of restart my battery was only 10% at the time of restart.Help me for any answer but tried to enter cwm but failed power on key gets automatically pressed
Zubair66 said:
I installed in on cwm 6.0.2 and worked eith bugless and smooth i inserted sim it asked to restart and i restart and then it turn on at samsung and then vibrates every second then reboots every time.I don't think that at time of restart my battery was only 10% at the time of restart.Help me for any answer but tried to enter cwm but failed power on key gets automatically pressed
Click to expand...
Click to collapse
You seem to have a stuck power button. @vincom has a 1-Stop sticky thread that is linked in my signature. Although that's for the Skyrocket, you might find some of it useful for the Hercules as well.
Does not turn on on vibrates and auto restart
Rom successfully installed and eorks later i put sim and restart and phone .It turn on automatically and after samsung logo it starts vibrating continously then restart but when i tries to enter recovery mode it automatically restarts
Zubair66 said:
Rom successfully installed and eorks later i put sim and restart and phone .It turn on automatically and after samsung logo it starts vibrating continously then restart but when i tries to enter recovery mode it automatically restarts
Click to expand...
Click to collapse
You need to give more details please.
- What recovery are you using?
- What GApps package?
- Did you repartition your device?
Full wipe, and try flashing only the ROM, without restoring any backup data, and see how it goes.
Or as I said, stuck power button.
how to root galaxy s2 t mobile version running on candy 5.1 lollipop
i lost my root access after i installed lollipop 5.1 custom rom. pls how do i reroot it
desmond4life said:
i lost my root access after i installed lollipop 5.1 custom rom. pls how do i reroot it
Click to expand...
Click to collapse
This ROM? Root is built in.
Try a full wipe and reflashing.
MY galaxy s2 t mobile version not charging after flashing candy 5 rom
i was running android 4.0.4ics stock and it was charging fine, but recently i flashed candy5 custom rom and my galaxy s2 is now on android 5.1 lollipop, but i noticed that my phone is no longer charging. once i plug in my charger, it will display charging for some few seconds and then it will stop and remain that way. even when i switch off, and then plug the charger, the battery icon will be counting without actualy charging. but if i restore my android 4.0 stock backup, it will be charging fine. pls i need help.
Help. My Letv X800 us version. have malware. it's install the app automatic without my permission.
It's auto download the app in the background and install the application automatic.
and run it , how to solve this problem.
I'm really in pain.
US/international Le1 pro that is sold worldwide on many web-shops comes with very unpleasant malware package. Several malware/trojans are included in rom. Many users suffered automatic installation of unwanted software, and there will be many more in next days.
Root, flash TWRP and install any RECENT custom ROM. Cuoco 14S for stock experience or latest CM12.1 for good experience. Good luck, you can find all infos in the threads!
I had the same problem and my phone bricked trying to install TWRP. Hope to have a chance this weekend to attempt to unbrick the phone this weekend. Let me know if you find a way to install TWRP, because none of the instructions here worked. For the record, this isn't my first rodeo...I've rooted every smart phone I've ever owned.
ProppaT said:
I had the same problem and my phone bricked trying to install TWRP. Hope to have a chance this weekend to attempt to unbrick the phone this weekend. Let me know if you find a way to install TWRP, because none of the instructions here worked. For the record, this isn't my first rodeo...I've rooted every smart phone I've ever owned.
Click to expand...
Click to collapse
I had the same issue. I couldn't get my phone to boot into any of the ROMS (CM, CUOCO92) with TWRP as my recovery. After a few attempts and a few soft bricks later, I stumbled across this sequence.
1- Flash TWRP 3.0.2. At this point, my phone could only boot into recovery.
2- From TWRP, wipe phone, root, flash custom rom, then reboot into TWRP (recovery).
3- Use Fastboot to flash Stockrecovery.img. Reboot. Your phone will be able to start the CM/CUOCO ROM.
YES..... I can confirm too. this phone is installing stupid apps by itself! I just found today morning that i had a new lock screen! wtf????? I'd flash the phone right away! get your self a new TWRP and a different rom.
You can download US rom by Cuoco92 for the US version + TWRP (version 5.5.014S) here:
LETV LeEco Le1 Pro X800
by Cuoco92 *Official Release*
https://www.facebook.com/cuoco92/info/?entry_point=page_nav_about_item&tab=page_info
Developer's thread (in German):
LeEco (Le1Pro_CN/US) X800+ MULTILANGUAGE ROM CUOCO92
I have also bought X800 -but from Gearbest, my friend that already got his phone told my about the same problem like OP, I wonder if we can simplly just install the official FW from here:
http://bbs.le.com//zt/eui/le_pro1.html
will it work or this FW not competible with our X800?
Darth_h said:
I had the same issue. I couldn't get my phone to boot into any of the ROMS (CM, CUOCO92) with TWRP as my recovery. After a few attempts and a few soft bricks later, I stumbled across this sequence.
1- Flash TWRP 3.0.2. At this point, my phone could only boot into recovery.
2- From TWRP, wipe phone, root, flash custom rom, then reboot into TWRP (recovery).
3- Use Fastboot to flash Stockrecovery.img. Reboot. Your phone will be able to start the CM/CUOCO ROM.
Click to expand...
Click to collapse
can you explain little more : wipe what? , root with su? , step 3 flash Stockrecovery.img . i want to instal cuoco92 5.5.014s and i am new in that .thank you
mastika100cc said:
can you explain little more : wipe what? , root with su? , step 3 flash Stockrecovery.img . i want to instal cuoco92 5.5.014s and i am new in that .thank you
Click to expand...
Click to collapse
Go to this site,it's in Italian but everything you need is here.
http://www.androidiani.com/forum/mo...rsione-usa-ovvero-le1pro_us-marchiato-ce.html
tc0566 said:
Go to this site,it's in Italian but everything you need is here.
my question is : did anyone succeed to install cuoco92 (5.5.012s or 5.5.014s) on phone with malware without bricking it and if answer is yes - to explain how he did this step by step , because it s very important . my phone is us version and eui 5.5.011s , youtube app and browser not working.
Click to expand...
Click to collapse
http://showtop.info/letv-leeco-malware-removal-fixing-boot-loop-problems/
https://sites.google.com/site/l1prousx800/
This might be of assistance.
finally i did it : flashed twrp3.0.2 , root with su 2.76 and malware killed. thanks to all of you for your help !!!
mastika100cc said:
finally i did it : flashed twrp3.0.2 , root with su 2.76 and malware killed. thanks to all of you for your help !!!
Click to expand...
Click to collapse
Masti a can you explain the steps u followed?. As I am facing the same problem my data pack gets exhausted in a day or two due to all mallware installation.
kamaljit.lote said:
Masti a can you explain the steps u followed?. As I am facing the same problem my data pack gets exhausted in a day or two due to all mallware installation.
Click to expand...
Click to collapse
first of all what win you use ?
I am using Win10 on my PC.
kamaljit.lote said:
I am using Win10 on my PC.
Click to expand...
Click to collapse
i use win 8.1 and i am not sure about install of drivers on win 10 .
so look at this post: http://showtop.info/letv-leeco-malware-removal-fixing-boot-loop-problems/
and this : http://showtop.info/download-flash-...-version-fix-missing-software-update-youtube/
i do it as hi did but install drivers different way .
try and if you have any trouble write again
anyone who have this problem follow this => work great
1) download file update.zip as is into the root directory of the phone storage (root directory means not in any folders) from here : https://sites.google.com/site/l1prousx800/
2) power off phone
3) hold power and volume+up button at the same time to boot into recovery
4) select update
5) the update should take about a minute and the phone will reboot, and you're done.
I just got a US version today. How do I know if I have malware? I haven't seen anything untoward happening yet
chr0m said:
I just got a US version today. How do I know if I have malware? I haven't seen anything untoward happening yet
Click to expand...
Click to collapse
You almost certainly have malware, install the update mentioned above
anyone who have this problem follow this => work great
1) download file update.zip as is into the root directory of the phone storage (root directory means not in any folders) from here : https://sites.google.com/site/l1prousx800/
2) power off phone
3) hold power and volume+up button at the same time to boot into recovery
4) select update
5) the update should take about a minute and the phone will reboot, and you're done.
Hello,
I haven't found in this big repository which is XDA any good ROM for HTC desire 620 (single sim), but i found it in other place in internet and i decide to share with you guys. This forum is missing special section for phone HTC desire 620 and i have to write it here in general "desire" section and becouse of "To prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!" I'm force to write this thread in General Secion. I hope there is not big deal with this and moderator will not delete it rather moving it to right section and let the others desire 620 users take benefits of such good ROM from CM.
The source of the rom is taken from: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
and i add some my coments to it.
cm-12.1-20160106-UNOFFICIAL-a31ul.zip
GAPPS
ARM -> 5.1 -> "choose"
Personaly recomend "pico" you can always install other google apps from google play store
TWRP
twrp 3.2.0-0 newest version work for meRoot SuperSUDownloand Zip file. Latest(V2.82) version work for me.
STEPS:
1. Unlock your Bootloader.
Register on site https://www.htcdev.com/bootloader/and simply follow the steps
2. Install TWRP.
https://www.xda-developers.com/how-to-install-twrp/
3. Do backup of your current system via TWRP.
4. Do wipe/factory reset
5. Install ROM.
6. Install gapps.
7. Install SuperSU.
8. Restart phone and enjoy! :highfive:
Bugs foud so far by me, to confirm:
- display percent of battery in battery icon on bar is not working
display percent of battery next to icon or hide percent is work fine.
Edit: Now it's working. I think it's after install Theme for CM12 from Play Store.
- Flash light and Torch dont work when battery is low and there is no information about it.
Kryspus said:
Hello,
I haven't found in this big repository which is XDA any good ROM for HTC desire 620 (single sim), but i found it in other place in internet and i decide to share with you guys. This forum is missing special section for phone HTC desire 620 and i have to write it here in general "desire" section and becouse of "To prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!" I'm force to write this thread in General Secion. I hope there is not big deal with this and moderator will not delete it rather moving it to right section and let the others desire 620 users take benefits of such good ROM from CM.
The source of the rom is taken from: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
and i add some my coments to it.
cm-12.1-20160106-UNOFFICIAL-a31ul.zip
GAPPS
ARM -> 5.1 -> "choose"
Personaly recomend "pico" you can always install other google apps from google play store
TWRP
twrp 3.2.0-0 newest version work for meRoot SuperSUDownloand Zip file. Latest(V2.82) version work for me.
STEPS:
1. Unlock your Bootloader.
Register on site https://www.htcdev.com/bootloader/and simply follow the steps
2. Install TWRP.
https://www.xda-developers.com/how-to-install-twrp/
3. Do backup of your current system via TWRP.
4. Do wipe/factory reset
5. Install ROM.
6. Install gapps.
7. Install SuperSU.
8. Restart phone and enjoy! :highfive:
Bugs foud so far by me, to confirm:
- display percent of battery in battery icon on bar is not working
display percent of battery next to icon or hide percent is work fine.
Edit: Now it's working. I think it's after install Theme for CM12 from Play Store.
- Flash light and Torch dont work when battery is low and there is no information about it.
Click to expand...
Click to collapse
i am trying to find a rom for the HTC desire 620 right now as i have just got one to keep me going till i get an upgrade in a few months.... Is there any others you know of?
Problem with CM 12.1 for HTC Desire 620
Please guys I just successfully flashed CM 12.1 on my HTC Desire 620 it worked well at first but after i downloaded some apps from play store, my device just blacked out and started showing CM boot animation for several minutes, then it showed android is starting optimising apps after optimising, I thought the device will boot but it went back to the CM boot animation and that is how it has been doing. I have used TWRP to do a wipe now everything is normal but if I download or install an app the problem starts again. Please I need your help
I have a htc desire 620g dual sim, whats this custom rom support this phone ?
Lost IMEI after factory resetting and flashing a ROM (rooted) ! HTC DESIRE 620g dual
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
subinsunil said:
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
Click to expand...
Click to collapse
Where did you find CM 13
Solution for invalid imei on Htc desire 620
If your device is custom rom and showing invalid imei ,then firstly flash stock rom on your htc desire 620 with flash tool in PC. Then note down your imei no.(printed on back of your phone). Root your mobile with kingroot.apk. Install chamlephon on your device. Then type your imei manually on that application.then restart.your imei will be repaired.
If you want to install custom roms then firstly install Mobile uncle tool and select backup and restore IMEI then backup the imei to extsdcard. Then flash your custom rom. And if its showing imei error then root with kingroot.apk and install mobileuncle tool.apk,then select restore imei from extsdcard then reboot.IMEI will surely get soluted. Hit helpfull if you like this thread.
Hi,GPS is working ?
subinsunil said:
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
Click to expand...
Click to collapse
Try fix from attachment. Found it here: https://forum.xda-developers.com/showpost.php?p=74842530&postcount=464
is there some newer android version ? lineage port ?
can you guys share the link of this rom? It asks for access from this link. but I can't reach the producer
Hello, I need the rom file. Can you grant access? Or can you upload it to a different link?
@Kryspus