[ROM][4.4.4][UNOFFICIAL] CyanogenMod 11.0 [R30, 2015-11-14]

[ROM][4.4.4][UNOFFICIAL] CyanogenMod 11.0 [R30, 2015-11-14] - Xiaomi Redmi 1S

Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
Bluetooth doesn't properly work with some devices. If you're affected, flash THIS ZIP in recovery.
Frequently Asked Questions:
Q) Where are Developer options and Performance settings?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I set 3G only network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why is cpu min freq raising to 1190MHz?
A) It's "touch boost", cpu min freq increases when you touch the screen to give a better response. When you don't touch the screen for a couple of seconds, cpu min freq goes back to 300MHz.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot to recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.

KitKat bootloader/modem files
This zip contains the bootloader and modem files from latest stable international release (MIUI7 V7.0.5.0 KitKat). I made it so users don't have to download and install the official zip, which also includes the rom. It's a flashable zip, so just install it from recovery and reboot (no wipes required).
Firmware 7.0.5.0: https://www.androidfilehost.com/?fid=24052804347850305

THX to developers work.!
Deleted the nonsense.

pgreed said:
The developer of the CM 11 for Redmi 1s is Kra1o5. Because him is present on the forum you have no right to post in the orig-dev section. I will report that.
Click to expand...
Click to collapse
You should've asked first. There are two developers in armani-dev, you know that. Well, I'm the other one. Check this:
https://github.com/armani-dev/android_device_xiaomi_armani/wiki
http://forum.xda-developers.com/showpost.php?p=56107913&postcount=11

does this kernel source really work?? i mean cause no cm11 rom has dev's version of kernel ! instead they all have xiaomi's stock kernel??
https://github.com/armani-dev/android_kernel_xiaomi_armani.git

ateeq72 said:
does this kernel source really work?? i mean cause no cm11 rom has dev's version of kernel ! instead they all have xiaomi's stock kernel??
https://github.com/armani-dev/android_kernel_xiaomi_armani.git
Click to expand...
Click to collapse
We use that kernel source for the headers, they are needed at build time. But for now we have to use stock kernel (latest version available). Still waiting that Xiaomi releases the kernel source....
Edit: New build up, 20141018 (a.k.a. R7).

jsevi83 said:
We use that kernel source for the headers, they are needed at build time. But for now we have to use stock kernel (latest version available). Still waiting that Xiaomi releases the kernel source....
Edit: New build up, 20141018 (a.k.a. R7).
Click to expand...
Click to collapse
Thanks!! Awesome ! Downloading....... :highfive: :highfive:
Lol.. i compilied a kernel using these Sources! and was gonna flash it to my phone!!

@ jsevi83 a.k.a fefifofum. (orig-dev) thank you for attending here, thank you for bringing to our devices cm11. and don't forget to thank you also to @ Kra1o5 (orig-dev)
I like your work...
#Still waiting that Xiaomi releases the kernel source
sorry my bad english.

jsevi83 said:
You should've asked first. There are two developers in armani-dev, you know that. Well, I'm the other one. Check this:
https://github.com/armani-dev/android_device_xiaomi_armani/wiki
http://forum.xda-developers.com/showpost.php?p=56107913&postcount=11
Click to expand...
Click to collapse
My complete apologizes but I didn't found your name before listed on the CM. I did a regrettable thing. Sorry and best wishes.
Now that is 2 developers is a hope that one of you can be able to modify the kernel adding more governor, voltage selector, optimize the screen consumption .... and dreaming
Back to reality why you can't use the XOLO q1100 kernel to modify the redmi?

Hi, I want to ask, is it OTA (CM Updater) supported? Or everytime we'll have to download and flash the whole ROM? And if its not, why don't you @jsevi83 add this project to an automated build server like Jenkins, It'll help users to get latest builds easily and the devs to solve the bugs fast. And what's the Gerrit Instance link (If you have one)? And I wanna know about the bugs in the ROM, is everything is working? SIM2 RIL, Data everything? Android One Devices will soon taste Official CyanogenMod support as stated by the developer. Our hardware is a bit better than A1, can we too look forward to have a Official CM support? Please do reply.
ThankYou

Really great ROM, thanks mates

We really appreciate reports about if Miracast / Wifi Display works or not for you guys.
Greetings

Kra1o5 said:
We really appreciate reports about if Miracast / Wifi Display works or not for you guys.
Greetings
Click to expand...
Click to collapse
Kra1o5, i'll ask some users about logs of it, greetings

Thanks for the wonderful ROM.
Dear Developer,
Thanks for bringing such a wonderful ROM for our device. I have been using it for quite sometimes now. And I never looked back after installing CM11. Having said just wanted to inform few bugs which I have been facing.
Proximity: The After a long call, and when you want to hang up the phone, when you pull the phone from your ear, it doesn't not wake. You have press power button to switch on or wake up the screen. What I am saying is that long hours mean something like more that half and hour talk on the phone. It does wake up when the other person hang up his phone.
UI Crashed: This usually happens when you try to change the wallpaper. But I know for sure, it happens only when you try to change the default wallpaper to something of your own choice. You can change it but occasionally or randomly , the ui crashed report pop up will show up and it will go the imersive mode and will start the ui from the lockscreen. If i don't change the wallpaper then it's cool.
Thanks

Hello dev,
thanks for bringing awesome rom for this device.
i'd like to ask about this glitch, because this problem exist since R1 release.
which one carrier name for sim card 1 isn't displayed correctly.

Sometimes to wake up the phone, you have to press the button several times 3-5 times
Sent from my HM 1S using xda premium

In call touches are still present - screen react on swipe down and afterwards you can touch anything from notifications up to buttons in quick settings.
Issue is easy to reproduce - call number, which don't pick up (SIM2), put one finger on proximity and with other swipe down from upper corner. Tap on screen...
Till now, I found 2 workarounds:
1. Call (pick up call), press power button. (this is easy to forget)
2. Use app ProximityScreenOff. It works perfectly, but messes with proximity sensor and sometimes lock screen don't start after pressing power button.
HM1S CM11 R7
---------- Post added at 10:37 AM ---------- Previous post was at 10:27 AM ----------
Benyegh said:
Sometimes to wake up the phone, you have to press the button several times 3-5 times
Sent from my HM 1S using xda premium
Click to expand...
Click to collapse
It's known issue. Go to Settings - Display & lights - uncheck Prevent accidental wake-up.
After some time you can check it back and it will work as intended.
HM1S CM11 R7

tried screen mirroring with sony w700b ,both tv and phone detected each other,but in the end tv showed device connection failed while the phone showed connected :/( when i first tried the tv was stuck at showing connecting to device , while the phone showed connecting and then reset back to the original prompt ,this was the case when until i accidentally locked the screen while connecting and then it started showing the error mentioned above)
i couldnt test much, as i had to return the phone ,its my sisters, so had to reflash to stock, so no log cat :/

Benyegh said:
Sometimes to wake up the phone, you have to press the button several times 3-5 times
Sent from my HM 1S using xda premium
Click to expand...
Click to collapse
Uncheck "Prevent accidental wake-up" under Display & lights settings.

Related

[ROM][4.4.4] CyanogenMod 11.0 for A3000-H [23/10/2015]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
NOT WORKING
Camera
WORKING
GPS
WiFi
Audio
Boots
SELinux
Sensors
Vibration
Bluetooth
HWComposer
Offmode charging
sw video en/decoding (not hw)
Internal and external sdcards
RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)
NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports
DOWNLOAD
Instructions:
ordinarystar said:
Pre-equisites to flash:
1. Correct Firmware
1.1 First verify your build version by installing Terminal Emulator from Play Store and then type the following:
getprop ro.product.board
if the output is a3000_prc_3gfull, proceed to number 2.
1.2 if the output is not a3000_prc_3gfull, you will have to first flash another firmware which can be downloaded at:
https://drive.google.com/file/d/0B5yhZ9sXUH_GMWhCQllhbkZRbUk/edit
Firmware flashing instructions can be referred here:
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
2. My version of CWM installed
2.1 Now you should install the CWM. You need a rooted device to proceed. Assuming you followed 1.1 and 1.2, your device is already rooted.
You will need:
2.1.1 Install mobileuncle MTK Tools from PlayStore or download apk from thread below: http://forum.xda-developers.com/showthread.php?t=2697236
2.1.2 My CWM, download the zip file and extract the recovery.img. Put the recovery.img in your microSD card.
http://olivier.hubdroid.com/a3/cwm/cwm_a3-20141220.zip
2.2 Open up mobileuncle MTK Tools, and select install recovery. It will detect the recovery.img in your microSD card (top in the list).
Tap on it to install. DO NOT tap on others in the list. Just click OK to install. If you have already downloaded my rom with it placed in your microSD card,
you may proceed to boot into recovery, or you can press cancel and shut down your device.
The pre-equisites is now completed!
Steps to flash:
1. Download my rom from http://olivier.hubdroid.com/a3/cm-11.0/ - select a preferred release. latest release recommended.
2. Download gapps from http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693 - select gapps for kit kat 4.4.4
2. Boot up recovery: hold power button and volume up button, as it booted up release power button. Use volume up button to browse to "recovery mode" and press volume down to proceed recovery mode.
3. Do the following:
2.1 Factory reset
2.2 Clear cache
2.3 Clear dalvik cache (Advanced > clear dalvik cache)
2.4 install from zip, select the rom and install
2.5 install gapps.
2.6 when done, reboot to system
The installation is now completed!
Click to expand...
Click to collapse
I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated.
My builds can be found here.
SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)
CREDITs
chrmhoffmann
kashifmin
Grarak
xplodwild
Dr-Shadow
superdragonpt
EnerJon
kupyxa4444
XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-26
Last Updated 2015-10-23

Changelog
BUILD STATUS
Willing to contribute? Just drop me a PM, send me pull requests on GitHub or join my IRC channel on freenode: #cm-a3!
Please don't clutter the thread, post your bug reports here instead. Thanks!
CHANGELOG
Code:
[B][U]29/07/2015:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Fixed automatic rotation
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Removed scsi_wait_scan module
[*][/list]
[B][U]02/02/2015:[/U][/B]
[list][*]Fixed sw encoding and decoding ([B][COLOR="Lime"]YouTube videos etc work now![/COLOR][/B])
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Reverted to LZMA compression (for TWRP)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Misc patches for ext4, crypto
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added support for kernel mode NEON
[*][/list]
[B][U]28/12/2014:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Switched to LZ4 compression (instead of LZMA)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added overall stats for all available cores
[*]Fixed battery capacity (item in framework-res)
[*][/list]
[B][U]26/12/2014:[/U][/B]
[list][*]Switched back to deodexed build on community request
[*]Removed recovery-from-boot.p (we don't really want this)[/list]
[B][U]20/12/2014:[/U][/B]
[list][*]Fixed Internal sdcard[/list]
[B][U]17/12/2014:[/U][/B]
[list][*]Fixed HWComposer
[*]Odexed build for better performance[/list]
[B][U]16/12/2014:[/U][/B]
[list][*]Fixed NVRAM
[*]Fixed Bluetooth
[*]Fixed RIL[/list]
[B][U]26/11/2014:[/U][/B]
[list][*]Initial public release.[/list]

Successfully flashed over A3000_A422_013_25_140624.
Felt like holding a nexus 7!
Thanks a lot man!

Thanks
Thanks Olivier for your enormous efforts, you are working alone , You rock
successfully installed it over A3000_A422_013_025_140926_WW_CALL_FUSE
Using this build "cm-11-20141127-UNOFFICIAL-a3"
I'm testing it , and i'm going to report the bugs i find via the bug report
Again , thanks

This is the best post on XDA so far.
Thank you for your effort @Olivier

Think you Sir...is it support Call function ?
i will try it soon...

Hesham Sleem said:
Think you Sir...is it support Call function ?
i will try it soon...
Click to expand...
Click to collapse
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***

nut27455 said:
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
Click to expand...
Click to collapse
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??

Hesham Sleem said:
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Click to expand...
Click to collapse
No. Guys, it's clearly stated in the OP that RIL/radio (and hence calls/SMS) is broken!

New user
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??

Magiiic said:
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Click to expand...
Click to collapse
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)

MirXas said:
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
Click to expand...
Click to collapse
Any solve to this problem's?

Magiiic said:
Any solve to this problem's?
Click to expand...
Click to collapse
Wait for future builds.
Stop asking questions in this thread, there is a seperate Q&A thread especially for this.

Really great work
Only the camera to go and I'll use this I promise
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app

Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Sent from my Lenovo A3000-H
MOD EDIT: Not a great sense posting some other ROM LINK here

afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
STOP spaming the same everywhere ! The RIL bug is not in the kernel, it's in the ROM itself.
Click to expand...
Click to collapse

Members,
It is not so difficult to be sensible and considerate.
1) Kindly stop asking questions here. Use the Q&A.
2) If you find something not to your liking, find something which you like or produce what you like by yourself
THREAD CLEANED.

OP thankyou for this works very well with my F version ,never seen HD video load so fast

afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Click to expand...
Click to collapse
Yes, the CM11 kernel is based off my HodorKernel. Apparently the kernel isn't the problem here - you could flash it on any fused Stock ROM and everything would work.
To those who wanted ETAs: At the moment, I'm a bit busy with exams and other devices. Bugfixing is progressing rather slowly, not only due to time constraints but also because I'm working on this alone and it's not easy to work on mtk devices.

keep up the good work.
you can make it buddy.

[ROM][6.0.x][UNOFFICIAL] CyanogenMod 13.0 [20161107]

Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
Music pauses during screen off. A workaround can be found here.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Q) Where should I ask other questions related to this rom?
A) http://forum.xda-developers.com/redmi-1s/help/rom-cyanogenmod-13-0-t3282811

KitKat bootloader/modem files
This zip contains the bootloader and modem files from latest stable international release (MIUI8 V8.0.1.0 KitKat). I made it so users don't have to download and install the official zip, which also includes the rom. It's a flashable zip, so just install it from recovery and reboot (no wipes required).
Firmware 8.0.1.0: https://www.androidfilehost.com/?fid=24694152805484448

Superb work as always @fefifofum !
Sent from my HM 1SW using Tapatalk

Hurray............Finally got ur Release of CM13....Cheers

Guess I'm not sleeping tonight.
Sent from my HM 1SW using Tapatalk

wow have nice day, and say yes for not sleeping tonight, hahahaha...... sori for OOT thank bro @fefifofum you like fire ...

Running like butter on grease! So far I've seen only CM source issues on it like network bar is grey even when there is network, workaround is to turn airplane mode on and off. Not used to the new font.
Multi-window
Sent from my HM 1SW using Tapatalk

fefifofum said:
Known bugs:
When bluetooth is on, a log file is created in internal sdcard. You can manually delete it.
Click to expand...
Click to collapse
Let's see if we can change it to "?" mark in the nearest development..

Thanks for you hardwork of the newest cm13...:thumbup: @fefifofum

If everyone that's trying it could report here that would be great
Sent from my HM 1SW using XDA Free mobile app

camera can save in external sd ?? any one try ?

Compatibility Fixed?
Can anyone clarify this? Is the compatibility issues with games solved? Last time I installed this rom, FIFA 15UT and many other games just kept crashing without even opening. Someone please let me know if this is happening, thanks.

hudadoank said:
camera can save in external sd ?? any one try ?
Click to expand...
Click to collapse
No , for daily use cm12.1 you wanna live on edge of technology try cm13 they still lag behind cm12.1 features.
Awesome work fefi as always [emoji108]

Our Beloved Armani Devs :beer::beer:
Redmi 1s : Started from 4.3 Jelly Bean ( Stock)
Now at 6.0
One hell of a Journey For a Sub $100 device

3G mode not working....any solution ?????

This rom with my class 10 sdcard... Flawless

Any one tested the battery life on this?

Unfortunately move to sd not support:crying:.... future or next update will included?? also hope camera picture able save to ext sd as well in future Thanks in advance

Can we use 12.1 gapps package with marshmallow builds?

[ROM] [UNOFFICIAL] Paranoid Android [6.0.1]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are launching brand spanking fresh. All new features. New team members. New everything and we have made sure that everything that we are releasing has been polished to our best.
A lot went into this version of Paranoid Android, specially on the CAF side (OnePlus / Non-nexus devices). We ship with custom in-house kernels tweaked to provide the best power-battery combo, new functionalities and designs for hardware-specific options like the alert slider and advanced controls just for OnePlus devices - so feel pretty.
The main features and enhancements that you will probably end up noticing are our custom Quick Settings tile reordering functionality, floating window support, immersive mode, the new on-the-spot interface and CM Theme Engine. There's much more to come, so sit tight!
Feature highlights
Floating mode
Immersive mode
On-the-spot controls
Quick settings re-order
Paranoid OTA (Updates)
Battery styles
Advanced power dialog
Quick pull-down
Theme engine
CAF specifics
Enhanced kernel + control
Advanced buttons control
Ambient display support
Download
Get my latest Xiaomi Mi5 build here.
This Firmware is also required Global Beta 6.9.29 Firmware
Changelogs
As we're getting back into the thread game, keeping up with threads and updating them as per changelogs can be too hectic given our schedule. However, very detailed changelogs always go up on our Google+ page, follow us for constant updates!
For Device specific changelogs, check the second post.
Instructions & requirements
We highly recommend you to follow these instructions very carefully. Users usually tend to skip a few steps and eventually fall in trouble. Are you with me? Good. Let's get this train going.
Just a few things to keep in mind first -
If you're coming from another ROM / Stock, your system data (not internal storage) and cache will have to be wiped. This includes apps, accounts, messages, call logs etc.
There's been some users complaining about different GAPPS variants messing up installs and causing a ton of issues. Upon investigating it seems OpenGapps Mini/Nano work best.
Understand that Paranoid Android is a custom ROM and it might lead to addiction as it's relatively good. We shouldn't be accused of anything just incase your cat starts drinking wine. Things get a little woozy in the Paranoid World.
Some brain might be involved if things go wrong. Not a lot though, as much to solve what's 1+1.
Okay let's get to the main bit -
Once you have all the required files - boot into recovery and wipe the bananas out of your device. Get into the wipe menu and wipe data, system, cache and dalvik cache (basically everything except Internal Storage).
Once wiped, get into the "Install from zip" menu and select the ROM zip. (pa_gemini_6.x...). Once added to the install queue, TWRP will ask you if you want to add more zips into the queue - Click on "add more zips" and select the firmware package.
Swipe the bar on the bottom to flash/install zips. Once both zips are done installing - Reboot into system and set-up your device, after you've let it settle with screen off for about 10 Minutes, do not do anything else! Please let your device settle with screen off for about 10 Minutes after the first boot, otherwise the system wont boot after a reboot!
Once you're done setting up your device - well that's when you're done. One thing though - Make sure you DO NOT INSTALL any other zip in the same queue as the ROM! Meaning, do not flash anything like Gapps, a kernel or a root package while installing the ROM. We recommend you do that AFTER you're done setting up your device.
Important / Useful links
OpenGapps
SuperSU root package
Paranoid Android Community (G+)
As always, we listen to what you have to say. Help me make PA better by submitting good bug reports possibly with a log attached. Learn how to take logs here. Submit bug reports and we'll try to iron out issues as soon as possible - it really helps a lot.
Mention me if you need any assistance and/or when reporting bugs or if you just wanna chat.
Thank you to savadam for the video guide and review below
Quick Review:
Installation Guide:
Cheers and #StayParanoid!
XDA:DevDB Information
AOSPA - Paranoid Android, ROM for the Xiaomi Mi 5
Contributors
33bca (& @bgcngm for the work on CyanogenMod)
Source Code: https://github.com/AOSPA
Device Source Code: https://github.com/33bca/android_device_xiaomi_gemini/tree/aospa-6.0
Kernel Source Code: https://github.com/CyanogenMod/android_kernel_xiaomi_msm8996
Version Information
Status: Beta
ROM OS Version: 6.0.x Marshmallow
Based On: AOSPA
Created 2016-11-10
Last Updated 2016-11-17

Bugs:
Performance issues with battery below 5%
Gapps are not working at first boot (just install them later )
You tell me (but without log, its not a bug!)
Changelog:
10.11.2016
Initial release
13.11.2016
Temporary Performance & Battery adjustments
Rom upstream with PA
Kernel Upstream with CM
Firmware Update to Global Beta 6.9.29
17.11.2016
Rom upstream with PA
Kernel Upstream with CM
3G Fixed

Tricks:
Battery and Performance Increasement
To activate my Battery and Performance Adjustments, excetuce "su" to run the Terminal in Superuse Mode. Then run "sh /system/etc/init.qcom.post_boot.sh" to activate them.

Installing as we speak, nice work bringing PA to mi5!

ota updates? isnt it unofficial

vallabh1994 said:
ota updates? isnt it unofficial
Click to expand...
Click to collapse
Yes, unofficial ota updates
I modified the paranoid hub app to check if i published an update If there is an update, you can download it within the settings

Boot.img with kernel falcon 1.4.1 by harrynowl implemented for rom paranoid OVERCLOCKING 2.5GHz
Running 100% on my Mi5 32GB
With kernel falcon implemented
You already know to download booti.img open zip of the rom and replace the boot.img of the rom with the downloaded ... zip and flash rom
DOWNLOAD: https://mega.nz/#!fN0XjLpT!YwFGdPguVhzv3xDe1S4XgP0Ngp8h9jQKKCpMuoln3sc

33bca said:
Yes, unofficial ota updates
I modified the paranoid hub app to check if i published an update If there is an update, you can download it within the settings
Click to expand...
Click to collapse
So will u release full. ROM updates or just upgrade via ota?

Thank you for supporting MI5
Sent from my MI 5 using XDA-Developers mobile app

vallabh1994 said:
So will u release full. ROM updates or just upgrade via ota?
Click to expand...
Click to collapse
full rom, no delta updates...

Installation is a bit fiddly. Have to follow instructions and give it a time to settle. Then you get an. excellent rom.
Exposed works very well.
Great camera. Take pictures while recording video
Fingerprint works better than any other rom.
Am staying Paranoid .
Thanks dev

4719 said:
Installation is a bit fiddly. Have to follow instructions and give it a time to settle. Then you get an. excellent rom.
Exposed works very well.
Great camera. Take pictures while recording video
Fingerprint works better than any other rom.
Am staying Paranoid .
Thanks dev
Click to expand...
Click to collapse
Which gapps version you use? I was installing this rom, wait for about 10 minutes and install latest opengapps nano and it can enter homescreen for a while then back to bootanimation again.
Sent from my MI 5 using Tapatalk

arif_kholid said:
Which gapps version you use? I was installing this rom, wait for about 10 minutes and install latest opengapps nano and it can enter homescreen for a while then back to bootanimation again.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Also latest open nano. Did you set up the rom, before flashing gapps?

arif_kholid said:
Which gapps version you use? I was installing this rom, wait for about 10 minutes and install latest opengapps nano and it can enter homescreen for a while then back to bootanimation again.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Can happen, happened to me only one time (the one time i did no logcat...) but after the reboot, it should work
I always use the pico gapps, but its up to you!

which version of twrp do u recommend?

younant said:
which version of twrp do u recommend?
Click to expand...
Click to collapse
its up to you, but i'm useing the newest from the twrp site

younant said:
which version of twrp do u recommend?
Click to expand...
Click to collapse
The best is TWRP-3.0.2-2-gemini.img
Doenload: http://www103.zippyshare.com/v/RHeV3pjE/file.html
---------- Post added at 11:15 AM ---------- Previous post was at 11:12 AM ----------
33bca said:
its up to you, but i'm useing the newest from the twrp site
Click to expand...
Click to collapse
Thanks 33bca for this rom
It's the best rom there is so far
Better even than the JDC
In antutu with kernel falcon implemented 139600 in my Mi5 32GB
From Spain we thank you
Results with Benchmark and falcon kernel implemented on my Mi5 32GB

Awesome work mate, maybe you should try to make this official? After every bug will be fixed :fingers-crossed:

marcoly said:
Awesome work mate, maybe you should try to make this official? After every bug will be fixed :fingers-crossed:
Click to expand...
Click to collapse
Haha no, this wont happen

33bca said:
Haha no, this wont happen
Click to expand...
Click to collapse
Why? You are not interested in this or Paranoid team is not accepting anyone else? :crying:

[ROM] [Final Build 1] 01/09 LineageOS 14.1 | Android 7.1.2 | Final

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2(Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available on the LineageOS Github repo. And if you would like to contribute to LineageOS , please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Unofficial builds of LineageOS 14.1 (Android 7.1.2) for the Elephone P9000
Code:
Changelog:
Fixed HDR
Fixed Deepsleep
Fixed all random reboots
Fixed Wi-Fi, Usb, BT tethering
Fixed memory leaks
Fixed offline charging
Fixed interface/and system bugs
Fixed logs spam
Fixed all other bugs, provided by users
Fix's of codecs ( Now multimedia working more and more better)
Fixed FPS of video recording in Screen recorder and Footej Camera APS
For video recording use app from Google Play Store (Footej camera ONLY (She is provide stable recording with high FPS)
Added Doze support
System optimisation
And a lot of other fixed for you :highfive:
Working:
It is boots and hardware accelerated!
WiFi
Fast charge
Camera
Offline charging
GPS
AGPS
Vibration
Audio
Auto brightness
RAM and ROM
Rotation
All sensors
NFC (Payments, pairing (TESTED!))
HDR
Lazer autofocus
Flashlight (Statusbar and Camera)
Bluetooth
External SD
RIL for SMS/Calls/Internet/Lte on 1 and 2 SIM
MTP and Mass Storage mode
Audio over Bluetooth ((a2dp)Music and etc)
Fingerprint Scanner
FM Radio
Wi-fi Tethering
Home button like in stock
Special button like in stock + new feature (Check it)
F2FS
In progress:
Video recording in stock camera app ( use Footej camera app from Play Store for video recording)
Download LineageOS:
Final Build 1:
https://www.androidfilehost.com/?fid=961840155545592306
How to install LineageOS 14.1 on your P9000:
For installation of new LineageOS 14.1 you need to do next action only one time. Next builds can be installed like about it written in point 2:
0. If on your phone installed stock Nougat(if not, go to point 2), you should install latest Android 6.0 ROM and after install any TWRP from github
1. Download ROM
1.1 Download Gapps: https://www.androidfilehost.com/?fid=817550096634792652
1.2 Copy Gapps And ROM on SD Card
Attention! If you user of old LineageOS and CyanogenMod ROMs, install next builds of LineageOS from this step.
2 Boot in to Recovery mode (on dissabled phone press Vol. Up and Power on buttons, wait of entering in to recovery mode).
Steps:
Copy ROM and GAPPS on sd card, if you still not copied
Choose: Factory reset
Choose: Data reset
Return, choose: Install
Choose downloaded LOS build
Wait of successfully flashing
After, don't reboot
Choose downloaded Gapps package
Wait of successfully flashing
Reboot your phone
Sources:
Device Tree: https://github.com/Deepflex/android_device_elephone_p9000-nougat
Device Common: https://github.com/Deepflex/android_device_cyanogen_mt6755-common
Vendor Tree: https://github.com/Deepflex/android_vendor_elephone_p9000-nougat
Kernel sources: https://github.com/Deepflex/android_kernel_elephone_p9000/tree/flexy
Thanks to:
Leskal
Mohancm
CyanogenMod team
Wuxianlin
Ferhung
SHVED
Xen0n
JonnyXDA
olegsvs
Visi0nary
DeckerSU
Gearlabs
andyrichardson
Team M.A.D
Appendix:
If you want to mirror the files or port the ROM to another device, I encourage you to do so! Only please respect my work and give proper credits. Also, if you like my works, you can donate to me. Thank you!
XDA:DevDB Information
LineageOS, ROM for the Elephone P9000
Contributors
Deepflex
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Android 6.0 Stock
Based On: LineageOS
Version Information
Status: Final
Current Final Version: Final Build 1
Final Release Date: 2017-09-01
Created 2017-08-10
Last Updated 2017-09-01

Reserved.

Wow great job, to bad i'm on vacation , and alto i've got time enough i need my phone functions in proper these weeks to Stay in touch for family reasons.
I love to Read other comments.
Thnx deepflex for the hard work done sofar, i guess other p9000 look a likes would benifit from youre hard work in this.

thx
I'm going to try it right now people

Are the branches of the kernel both updated, i would like to try and build aicp, based out of these sources. Also can i flash this version on the updated preloader, or do i need to go back to the old one?

Yay, that's good news. However, did you just copied the description of the old entry for LOS 13 or is it really based on Android 6? I'd make more sense to preload the phone with Android 7 stock rom for Android 7.1 based system.
Good job, appreciate your continuous work and look forward to a stable build also.

TheMRK said:
Yay, that's good news. However, did you just copied the description of the old entry for LOS 13 or is it really based on Android 6? I'd make more sense to preload the phone with Android 7 stock rom for Android 7.1 based system.
Good job, appreciate your continuous work and look forward to a stable build also.
Click to expand...
Click to collapse
Hello!. Description for los14.1, not copied from los13

Great news!!!! I'll wait until everything is working.
Thanks a lot!

Do not forget
!!! You must have a Android 6 rom loaded !!!!
If you use Android 7 you will be stuck in a bootloop...
so please if you are using Android 7 ... downgrade to the stock ROM first ( i used : Elephone P9000_Android 6.0_20160810 OTA)
and do not forget .. first boot wil take more then 5min .. so please be patient
Thanks deepflex for this rom . testing has now started !
michael

megasounds said:
Do not forget
!!! You must have a Android 6 rom loaded !!!!
If you use Android 7 you will be stuck in a bootloop...
so please if you are using Android 7 ... downgrade to the stock ROM first ( i used : Elephone P9000_Android 6.0_20160810 OTA)
and do not forget .. first boot wil take more then 5min .. so please be patient
Thanks deepflex for this rom . testing has now started !
michael
Click to expand...
Click to collapse
Hello. Waiting for feedback :highfive:

Ruben Craveiro said:
Are the branches of the kernel both updated, i would like to try and build aicp, based out of these sources. Also can i flash this version on the updated preloader, or do i need to go back to the old one?
Click to expand...
Click to collapse
Soon. Use Leskal open-source brunches

Deepflex said:
Hello. Waiting for feedback :highfive:
Click to expand...
Click to collapse
Hahaha ok no problemo !
-when i use open gapps "stock" version i have a lot of errors and slow system , so i cleaned the phone completely , reinstalled the phone with your beta and used the open gapps NANO package ... so far so good
-i know the camera is not working correctly but can you please fix this asap !!!
-speed is great
-wifi is faster then Android 6
-the default left button is not working well , i had to reset this to an other app. I set it now to "phone", so when i press the left extra button on the device it goes strait to the phone app. Thats working SUPER!
-sometimes the phone "hangs" doing nothing... reboot is needed.
-power button doesn't work .
-when installing i get 2 errors :
patching system image unconditionally...
E:unknown command [log]
E:unknown command [log]
-sound is great ! even louder than stock android 6
-after first boot i doesn't see my simm , just reboot it and its there and working.
michael

OK got 2.........810 Android 6 Rom installed lost my imei flashed recovery installed los14.1 bot no Sims but one thing is strange Maui Meter to recovery imei only seems to work when i installed Android 7 stable 2......418 i can restore my imei but in Android 6 what i need no way any plan?

can you port this rom to umi super ? umi super and elephone ar very very similar please
thanks

kurador911 said:
can you port this rom to umi super ? umi super and elephone ar very very similar please
thanks
Click to expand...
Click to collapse
if its so simillar you can port it yourself.. are you expecting someone will just say yes, to a device they dont even have? ...

Ruben Craveiro said:
if its so simillar you can port it yourself.. are you expecting someone will just say yes, to a device they dont even have? ...
Click to expand...
Click to collapse
**** you men, i dont ask anything for you.

kurador911 said:
**** you men, i dont ask anything for you.
Click to expand...
Click to collapse
Hm ok, no need to insult, why? just why?... and why do you even ask for someone to port a rom, to a device they *dont even have*? its just spamming with things that will never be done... if you want the rom so much you should talk to the developers of your device to try and port the rom from this device to your device or simply try and port it yourself... Another tip, is that you try to improve your education, and be nicer to people. Insulting wont get you anywhere....

kurador911 said:
can you port this rom to umi super ? umi super and elephone ar very very similar please
thanks
Click to expand...
Click to collapse
https://github.com/Deepflex/android...-nougat/blob/master/proprietary-files-mtk.txt
Copy this lib's/bin's from your stock in ROM. For unpack of sdat use sdat2img, and ext4unpacker. Or make flashable zip with this lib's/bin's.
kurador911 said:
**** you men, i dont ask anything for you.
Click to expand...
Click to collapse
And, please, don't need agression. Ruben says all correctly.

Hi deepflex
i tried everything but the power button doesn't work. I reinstalled several time android 6 and played with variuos openGapps packages.
i ended up with your Beta version and openGapps nano.
I CAN NOT make the power button work to instaled lock the phone....so when the phone is unlocked i can not make it lock.
I installed the Lock app from the playstore to lock my phone.
conclusion : unlock with the power button works but locking the phone with the power button DOES NOT work.
Also a reset to factory default from the OS does not work ! it will end up with a device thats only booting in to recovery mode.
michael

megasounds said:
Hi deepflex
i tried everything but the power button doesn't work. I reinstalled several time android 6 and played with variuos openGapps packages.
i ended up with your Beta version and openGapps nano.
I CAN NOT make the power button work to instaled lock the phone....so when the phone is unlocked i can not make it lock.
I installed the Lock app from the playstore to lock my phone.
conclusion : unlock with the power button works but locking the phone with the power button DOES NOT work.
Also a reset to factory default from the OS does not work ! it will end up with a device thats only booting in to recovery mode.
michael
Click to expand...
Click to collapse
Hello! Thank you for feedback. It's fixed. In next build

[ROM][8.1.0][OFFICIAL] ⚛ CarbonROM (Noct) Weeklies | Sony Xperia Z1 ⚛

CHANGELOGS:
All changes can be tracked here:
https://blog.carbonrom.org/changelog
You can find the changelog prior to official builds below.
Official Build:
* Fixed Video Recording
* Improved RIL for C6903 devices
14/04/2018:
* Fixed Camera
* Fixed RIL and mobile data (on C6902 at least)
* Enforcing SELinux + user build
* Fixed Bluetooth
23/01/2018:
* Fixed audio
* Fixed thermanager
24/12/2017:
Initial Release
BUGS:
* Connecting to data for C6902 devices is buggy (read FAQ).
* NFC may or may not be broken (I cannot test it as my device does not have the NFC plate).
FAQs (Please read before posting questions):
Q: Does the ROM support OMS and theming with Substratum?
A: Yes it does! Simply enable "Allow untrusted overlays" from Settings -> CarbonFibers -> Privacy and Security and follow the instructions that follow.
Q: Does the ROM work on C6902 as well?
A: Yes, but you will face a few issues while trying to connect to mobile data. Apparently the way to make it work is by going to *#*#4636#*#* -> Phone Info, change the network mode to WCDMA only, and turn on and turn off airplane mode.
Q: Is the ROM rooted by default?
A: No, please flash your favorite root solution after installing the ROM.
Q: Do I need to make a factory reset before installing this ROM?
A: If you're moving from cr-5.1 official builds to cr-6.1 builds, then a factory reset is recommended. Some have been able to dirty flash their way from cr-5.1 to cr-6.1, but before trying that, make sure you have a backup, in case you're caught in a bootloop. Clean install is ALWAYS recommended. If you face any issues after dirty flashing, clean flash first and see if it's persistent and only then report the bug.
Q: SafetyNet?
A: Sure, if you use Magisk and enable Magisk hide.

Reserved

Nice!
Merry Christmas :victory:

Thanks for sharing carbon rom oreo, I will download and let you know whether audio and nfc work
---------- Post added at 03:41 PM ---------- Previous post was at 03:23 PM ----------
Unable to flash on latest TWRP, any ideas how to fix?
Coming from CarbonROM nougat, i already done wipe /data /system /dalvik-cache /cache
https://drive.google.com/open?id=1fVGP6Be2u5j7T8lpPkeuF_mXmQXxIw6_

miXXed404 said:
Thanks for sharing carbon rom oreo, I will download and let you know whether audio and nfc work
---------- Post added at 03:41 PM ---------- Previous post was at 03:23 PM ----------
Unable to flash on latest TWRP, any ideas how to fix?
Coming from CarbonROM nougat, i already done wipe /data /system /dalvik-cache /cache
https://drive.google.com/open?id=1fVGP6Be2u5j7T8lpPkeuF_mXmQXxIw6_
Click to expand...
Click to collapse
Try to install advanced kernel img via fastboot. Then reboot. In the kernel is twrp 3.1 included. Then you're able to boot into that recovery. Wipe all and try again to flash

MIcHiJK said:
Try to install advanced kernel img via fastboot. Then reboot. In the kernel is twrp 3.1 included. Then you're able to boot into that recovery. Wipe all and try again to flash
Click to expand...
Click to collapse
same issue

miXXed404 said:
same issue
Click to expand...
Click to collapse
Okay strange. When nothing helps try to start from the bottom and go back to stock. I will also test this rom later to check, if it's working on my third party screen.

Reflashing stock, flashing twrp again doesn't help, still same issue, something is wrong with carbon rom oreo zip

@miXXed404 update your recovery in this version https://androidfilehost.com/?fid=745425885120742869
https://forum.xda-developers.com/showthread.php?t=2522762
in any case follow the XDA link to resolve the error!
Merry Christmas!

Hansars said:
@miXXed404 update your recovery in this version https://androidfilehost.com/?fid=745425885120742869
https://forum.xda-developers.com/showthread.php?t=2522762
in any case follow the XDA link to resolve the error!
Merry Christmas!
Click to expand...
Click to collapse
Flashing recovery that you provided does not help, still same issue persist, also there is no lines in updater-script thats checking for specific device

thankyou so much....

Nevermind,somehow i managed to flash it,first impressions.. working better than nougat, at first boot up it heated up a lot, i can't enable NFC in settings, so i can't even test it, battery is draining pretty quick, gapps is working, audio is not working , i'm gonna use it for few days, maybe i will find more bugs.. and please fix thermal in this rom, 81c cpu 44 battery and still all cores is enabled on max frequency 2150mhz

miXXed404 said:
Nevermind,somehow i managed to flash it,first impressions.. working better than nougat, at first boot up it heated up a lot, i can't enable NFC in settings, so i can't even test it, battery is draining pretty quick, gapps is working, audio is not working , i'm gonna use it for few days, maybe i will find more bugs.. and please fix thermal in this rom, 81c cpu 44 battery and still all cores is enabled on max frequency 2150mhz
Click to expand...
Click to collapse
I have no issues of battery draining on my end. Nor did I face heating issues. My phone went to deep sleep and drained less than 1% an hour. Maybe you should just let it settle down for a few days and see if it helps.
If not, maybe it's me not using a SIM card or gapps giving me a better experience.

drakonizer said:
I have no issues of battery draining on my end. Nor did I face heating issues. My phone went to deep sleep and drained less than 1% an hour. Maybe you should just let it settle down for a few days and see if it helps.
If not, maybe it's me not using a SIM card or gapps giving me a better experience.
Click to expand...
Click to collapse
Really? no heating issues? try use 100% of cpu and it should throttle down frequency when it heats up, but it doesn't doing that
i'm only connected to wi-fi and charging, brightness set to 0% no apps in background.... no problems with heating? look at this
https://drive.google.com/open?id=1PMnMLuNsunStZV_Wd-AKXj8uR3FrOGCV

ΤΗΑΝΚ YOU! Merry Christmas!

miXXed404 said:
Flashing recovery that you provided does not help, still same issue persist, also there is no lines in updater-script thats checking for specific device
Click to expand...
Click to collapse
good morning, I saw that you have solved, I still do not flash because of too many bugs and the bug that is present in addition to the other bugs! thanks to the developer for the work done! @drakonizer

o be an alpha, the rom is stable.
some things do not work:
- without audio in calls and player
- root can not be activated
- the phone gets very hot
- the wifi is disconnected every time
- the sim card sometimes detects it and other times it does not
- the gapp can not be installed gives error 20 the twpr
for now just notice those problems .... thanks

rayzo_1986 said:
o be an alpha, the rom is stable.
some things do not work:
- without audio in calls and player
- root can not be activated
- the phone gets very hot
- the wifi is disconnected every time
- the sim card sometimes detects it and other times it does not
- the gapp can not be installed gives error 20 the twpr
for now just notice those problems .... thanks
Click to expand...
Click to collapse
Gapps.. use this, it will work-- https://drive.google.com/drive/folders/16D1ev3XgcjoewlPuafvlheUaqFA15cly
Root.. flash magisk it worked for me
Wi-Fi also works for me
No sim card problems
i agree that phone gets very hot, this rom is not safe to use because of overheating

miXXed404 said:
Gapps.. use this, it will work-- https://drive.google.com/drive/folders/16D1ev3XgcjoewlPuafvlheUaqFA15cly
Root.. flash magisk it worked for me
Wi-Fi also works for me
No sim card problems
i agree that phone gets very hot, this rom is not safe to use because of overheating
Click to expand...
Click to collapse
thanks
gapps work
but I do not get root with magisk 15 and 14 gives me error 1 in twrp
a question the audio works for you?
temperature in 40 degrees and more

Develop Bugs

welcome