Hello,
I just have a Problem with my Phones.
Currently I use my G3 V10H and my Galaxy S3 (Android 4.3.1).
On Wednesday I connected my G3 to WLAN with Internet Access. Then I connected my S3 with my G3 and shared the Internet Connection with Bluetooth Teethering.
Everything works fine the whole day.
On Thursday I could not establish the bluetooth connection between the phones. I restartet both and it work. It was okay for me.
But today even the reboot does not help anything.
When the phones started I activate Bluetooth on every Phone. They dont have any paired devices. Then I search for bluetooth devices and try to pair the the other one.
The system shows me the pairing code and everything looks fine. Now I have the other device in the pairing list. But when I try to connect the device is working, then it shows "connected" and not a second later the connection is lost.
This problem is the same when I try to pair from my G3 or from the S3.
Any Ideas for that?
Related
Situation:
I'm using a Xlink bluetooth gateway in my house to connect my phone with and I also have a Mazda CX-5 with integrated Bluetooth system with the latest update from TomTom and Mazda. In the Mazda, I use the Bluetooth mainly for the phone, but occasionally use it to stream audio.
Phone:
T-Mobile samsung S2 x SGH-T989D with ICS 4.0.4 (Rogers leak)
Issues:
At first (With official Gingerbread)... everything was working fine. Both device paired and all functionality worked.
Then, applied official ICS update from Kies software ICS 4.0.3 and Bluetooth issues started. I first paired my Xlink device. So far it worked. Then tried to pair my Mazda, everything was really slow but managed to have it work. Turn the car off, get back in the house and the phone is now able to pair with my Xlink device, but cannot connect as a phone audio. Even if I go manually in the Bluetooth menu and try to activate the Phone audio it wont work. Only way to have it work again is to unpaired the Mazda and reboot.
After reboot, the phone works great in the house with my Xlink device. Going back to my car and try to pair my Mazda. Same issue. The phone does pair with the Mazda, but I'm unable to make a call since the phone cannot activate the Phone audio.
Look online and have tried the ICS 4.0.4 (Rogers leak) and same issue with Bluetooth.
The only way my devices works perfectly is when I only pair with one device at a time. There is something happening when you pair more than one device, even if not both device are turned on or in range.
Anybody got the same issue or a fix to that?
Thank you and sorry if my post is a little long... but that issue is the only thing that make me not enjoy my phone.
Hello Everyone,
I have a Note 3 Neo 7500Q ( Turkey Version). I am overall satisfied with the phone, but when I try to connect to my multimedia car kit via bluetooth, I have problems. It pairs up with the kit, but neither my nor the other parts voice is transmitted. I tried to every way without luck. Does anyon else has or had the same problem? Is there a way to overcome this issue? All kinds of help is appriciated.
I use the BT car kit all the time, with no issues whatsoever. My unit is a Parrot MK9200 or something. It is 4 years old, can't remember the exact model number. Phone calls, music streaming etc. works fine.
Here are a few suggestions you might try:
1) When I had the Parrot initially, 4/10 the phone was failing to connect over the Bluetooth. I upgraded the Firmware of the Parrot. Ever since, no connection issues. Check whether your Bluetooth unit has a FW update!
2) When the phone pairs with the car the first time, it asks for permisson to access the Phone book, logs etc. Mark "Always yes". That might be your problem.
Hoping someone can help shed some light. Googling didn't turn up anything. My S6 after the 5.1.1 update, bluetooth is borked. It is connected to my Sony Smartwatch 3, Gear 2 Neo, and was connected to my Fibit Charge HR and Microsoft band. The Fitbit Charge HR got a firmware update and then would not pair with my S6, but would pair with my work iPhone. So I thought it was defective. But it pairs with my old S5. So I went into bluetooth settings and did a scan and it will not see it. So, I stupidly unpaired my microsoft band and now it's now recognized at all. The SW3, G2 Neo are paired, as well as my Sync in my car, but show up in bluetooth as "Not Connected" even though they are. This is frustrating and I don't want to go back to my S5. Everything else seems to work okay - just the bluetooth. Anybody have any thoughts? I'm on the latest OTA, OFE.
SO no one's got any ideas. I have wiped cache both while normally running and by booting into recovery. Bluetooth still hosed. Would a factory reset help?
Saafir said:
@kbboykin Does your devics keep a bluetooth pairing history? If so delete it and try again. Have to do that with a lot of my devics
Click to expand...
Click to collapse
I don't think it does. See screenshot. All of these devices are paired and connected, but bluetooth says they are "Not Connected".
Ive been having problems connecting my LG G3 Official Tmobile ROM to my Hyundai Elantra. 9/10 times it doesn't detect the connection at all. It takes several attempts at unpairing the phone, and disconnecting the system on the car before it connects once. Here is what I have done so far without success.
- unpair device
- factory reset car system
- cache and clear bluetooth.apk
- use autoconnect bluetooth apps
Yet it never auto connects. Does anyone here have any solution to this? I used to have Huawei Ascend which used to connect perfectly to my car everytime.
Bump. Help anyone? Im on breadcrumbs now and even ready to install another rom if it helps with my issue. Can somebody let me know if that will do?
Hello, I have some problems with the bluetooth connection to my Seat Leon (2016). Pairing worked fine but once I return to my car only the A2DP profile gets connected. In the car menu media control is working correctly but the phone part is shown as disconnected. The bluetooth connection state in the phone settings shows "connected (no phone)" then.
To fix this I have to manually disconnect and reconnect bluetooth on the phone - afterwards everything is working as expected. This is very annoying though and I had no such issues with my previous Nexus 6P (stock 8.1).
Any suggestions? If there is no solution I try to fix this with tasker, however I'd clearly prefer a "native" solution.
Thanks in advance.
Seems like it's working with the app Bluetooth Auto Connect, will test it more intensively in the next days. But I'm still wondering why it's not working out of the box...