Related
my arc sometimes makes squeaking noises, depending on the way i'm holding it. it seems to be coming from the bottom part or back cover.
does this happen to anyone else?
somevietguy said:
my arc sometimes makes squeaking noises, depending on the way i'm holding it. it seems to be coming from the bottom part or back cover.
does this happen to anyone else?
Click to expand...
Click to collapse
I used to have this problem. But once I have "properly" attached the back cover, the noise is gone.
I've had a bit of issues, but it seems to be that the back cover doesn't quite fit tightly with the body of the phone. I just moved it around, pressing it here and there, and the squeaking is now at a minimum level.
arc cover
this is one of the reason i am in a fix..
i dont like to put cover to my phone. currently using x10 and there is no problem whatsoever.
it doesn't slip from hand, there arent any finger prints, smudges etc. etc.
how is your experience of arc without cover? ok.. i know now it sweaks.
apart from that.. i heard from some user that it slips from hand, its plastic is not that tough and will get marks on it easily.. is it true?
I had this problem on my Misty Silver phone at the middle edge of the battery cover I think towards only one side. But I think that is because I applied the full body protector on the battery cover too hard to get it perfect. The sound reduced overtime especially, after I removed the cover and fitted it carefully.
Currently, I still haven't applied any protector to my Midnight Blue Arc and hear to squeaky sounds.
kitsVA said:
I had this problem on my Misty Silver phone at the middle edge of the battery cover I think towards only one side. But I think that is because I applied the full body protector on the battery cover too hard to get it perfect. The sound reduced overtime especially, after I removed the cover and fitted it carefully.
Currently, I still haven't applied any protector to my Midnight Blue Arc and hear to squeaky sounds.
Click to expand...
Click to collapse
Thanks kitsva
So you have removed the full body cover of silver? And it doesn't squeak.. reassuring
Misty silver you will be mine in a week... yey.
somevietguy said:
my arc sometimes makes squeaking noises, depending on the way i'm holding it. it seems to be coming from the bottom part or back cover.
does this happen to anyone else?
Click to expand...
Click to collapse
Yes it does. Quite annoying.
Sent from my LT15i using XDA App
regard on the screen protector, have u seen the type like iphone, protect scratch from front and back
My Arc has a creaky battery cover, it is okay at the top end where the headphone socket is but the bottom left and right corners and near the battery had some definite "give". I solved the problem by getting a heat resistant thick tape from Homebase and sticking a couple of strips inside the battery cover. Now it is solid as a rock...what a difference.
No squeaking sounds yet.
murrayalex said:
My Arc has a creaky battery cover, it is okay at the top end where the headphone socket is but the bottom left and right corners and near the battery had some definite "give". I solved the problem by getting a heat resistant thick tape from Homebase and sticking a couple of strips inside the battery cover. Now it is solid as a rock...what a difference.
Click to expand...
Click to collapse
Is there a certain type of heat resistance tape you used?
Dont have this problem back cover fits nice
@kbadone nice avatar
Mine also makes noises sometimes. I already put some tape inside the back cover, but sometimes it squeks nevertheless.
My gf has a Nexus S and its body is much more solidly built.
depulle87 said:
Dont have this problem back cover fits nice
@kbadone nice avatar
Click to expand...
Click to collapse
Same goes to you
The good news we are getting 4 DLC karakters this summer
murrayalex said:
My Arc has a creaky battery cover, it is okay at the top end where the headphone socket is but the bottom left and right corners and near the battery had some definite "give". I solved the problem by getting a heat resistant thick tape from Homebase and sticking a couple of strips inside the battery cover. Now it is solid as a rock...what a difference.
Click to expand...
Click to collapse
+1
Could you please specify bit more about that heat resistant thick tape?
Touranaga said:
+1
Could you please specify bit more about that heat resistant thick tape?
Click to expand...
Click to collapse
yea, please clarify i also want to try this solution
somevietguy said:
yea, please clarify i also want to try this solution
Click to expand...
Click to collapse
It's just your typical bog standard tape you can pick up in any DIY store that claims to be heat resistant. I thought heat resistant would be better as I have a bit on the inside back cover that lies above the battery but it probably doesn't have to be at all, just get a nice thick tape. Worked a treat, I have a super un-squeaky back cover now!!
I have just got the Arc, and after a couple of days I had had enough of the squeaking. I then placed two strips (3 cm x 10 cm) of duct tape on the inside of the back cover, and it worked wonders! No more squeaking.
Hey Guys and Girls,
I just got my Galaxy S III a month ago and I am developing a problem I can't seem to figure out. On the edges of the phone, where the glass meets the blue plastic I am getting a build up of dirt. I keep my hands very clean as I am super OCD about my devices. With that being said, I am getting dirt and "grime" build up in the sides. Sometimes it's hard to notice but it becomes clearer as more days go on. I have contacted Samsung and they were unwilling to decide what it was without seeing it. I contacted my carrier who sent me a replacement after ten or more calls. The new device seems to suffer the same fate. I am wondering if anyone else is having this problem or knows how to get rid of it. I tried to clean it with an air canister with no luck and plenty of sharp objects. None which would do a great job, the only thing that came close was a toothbrush and that was difficult to say the least. Is this a known problem or am I getting more defective devices. Thanks for your input.
P.S- I know the photo isn't great and I will take more to show the effects. It is most noticeable in the corners, the sides, and around the speaker and home button.
Appreciate the help!
I don't have any issues and I have the white one, so it should be more obvious.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
annulation said:
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
Click to expand...
Click to collapse
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
chaoticfury said:
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
Click to expand...
Click to collapse
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Before I had a case I didn't have this issue. The gap isn't very noticeable. I have a Diztronic TPU case now ($10 Amazon) and it has a small lip which covers that gap. Maybe you have dirty pockets or a batch of phones that just had a slightly larger gap.
zmore said:
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Click to expand...
Click to collapse
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
chaoticfury said:
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Click to expand...
Click to collapse
It can't get behind the screen because it's one piece, so don't worry about that.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Yeah, many of the hard polycarb cases -- like Samsung's mesh case, or the popular Rock Quicksand -- that offer little edge protection don't cover the the entire lip because they can't. All TPU and hybrid cases do, though.
chaoticfury said:
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
AngelsNecropolis said:
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
Click to expand...
Click to collapse
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
chaoticfury said:
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
Click to expand...
Click to collapse
Np. I use this case. http://www.amazon.com/Diztronic-Fle...54&sr=8-7&keywords=diztronic+galaxy+s+III+tpu The matte feel is nice and it comes with a screen protector which I applied and it's good quality as well. It doesn't attract as much finger prints as other screen protectors I've used and it's very clear.
Off Topic:
But... even with a TPU case you'll have to be careful of drops. Gorilla Glass isn't as strong as it's touted to be against sudden impacts (watch iPhone5 vs Samsung Galaxy S III drop test). My GSII got a small scratch prior to applying a protector and just today a coworker dropped her GSII on concrete and the TPU case didn't stop the screen from severely cracking. It will protect from a lot of surface scratches though. My mom just got her first smart phone (a Pantech) and dropped it and it slid across the floor. I hadn't gotten her screen protector yet and her screen has some small scratches and nicks.
I guess my point is even if it reduces the aesthetics get a case, a screen protector, and be careful still.
I ordered that case like you suggested but it has yet to arrive. The replacement phone I got from my carrier is having even worse problems than my first one. I was even more careful with this than the others. Not really sure what to do. I am intrigued by the fact that I see nobody who has a white GS3 post problems about it. I wonder if the blue is the only one with these kind of issues.
I've got a blue one and don't have that problem
Galaxy SIII via XDA premium
This thread on tight fitting cases might be helpful.
I have. White phone no such issues I also noticed the white button sticks out a bit more.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
cboone said:
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Going to see if I can get a white. I prefer blue but I hate this problem.
Mine collects dust too and I use a Rock case. I'd clean it if I could, but I can't seem to fit paper or anything in to push it out either. It's hardly visible, not putting too much thought in to it.
So, I ordered this bumper case on Christmas Eve, and it ended up taking 15 business days for me to receive it, due to delays and because the product was being shipped from the UK, while I live in the US.
The case consists of plastic/TPU like frame with rubber going around it. The case was actually quite hard for me to put on, however, I think it might be because I have a skinomi full body protector on it, so it does take a bit of a push to get it in. Another thing is, the power and volume buttons can be kind of hard to push, and the camera button especially, but once again, I have a protective skin on the inside, so it is harder for me than it may be for you if you do not have one on it. I have attached a diagram that may give a better idea on this issue.
There is a nice grip to it, and there is alot of space between the rubber part of the case and the screen for you to set on the desk on the back or face-down, I even have a nillkin glass screen protector on the front, and it lies on its front side just fine.
Now, the bad thing about this case is that my magnetic charging cable did not fit at all. I had no choice but to modify the cable. I took a knife and cut off the sides, filed them down a bit, and then take some elmer's glue to fill in areas where I cut too deep. After that, it fit perfectly fine, and I have no issues with it what-so-ever. Note that I am using a 3rd party charging cable, I am not sure if the original DK31 cable will fit without any modifications.
The case comes in black, white, and purple. I have attached the links to the case and the respective colors below, as well as pictures of my own. Pictures were taken with my sister's Nexus 5 on 4.4.2 Stock KitKat.
Black:
http://www.mobilefun.co.uk/metal-slim-bumper-frame-for-sony-xperia-z1-black-p41877.htm
White:
http://www.mobilefun.co.uk/metal-slim-bumper-frame-for-sony-xperia-z1-white-p41878.htm
Purple:
http://www.mobilefun.co.uk/metal-slim-bumper-frame-for-sony-xperia-z1-purple-p41879.htm
UPDATE: So I went ahead and removed the skinomi side guards, and the buttons are ever so slightly easier to press. The most noticable difference is the dedicated camera button, as it was extremely hard to push down all the way in order to launch the camera application, and use it to take images. I'm actually kind of glad that I took them off.
Case Review
One of the best reviews i have seem for this case! My friend actually just got this case today and had the same problem with the magnetic charging port. They should have checked that out prior to release XD. Anyways, Solid review. Thanks granted
kusanou said:
The case consists of plastic/TPU like frame with rubber going around it. The case was actually quite hard for me to put on, however, I think it might be because I have a skinomi full body protector on it, so it does take a bit of a push to get it in.
Click to expand...
Click to collapse
Can you confirm whether this is the skinomi protector you have ?
kusanou said:
Another thing is, the power and volume buttons can be kind of hard to push, and the camera button especially, but once again, I have a protective skin on the inside, so it is harder for me than it may be for you if you do not have one on it.
Click to expand...
Click to collapse
ok, this i was not expecting to hear. I figured since the buttons were there that it would be easier than cases that only had holes which means the button now sits flush with the case requiring a more conscious press. So when i saw a case that had rubber inserts i figured easier to push as they are sitting right on top of the real ones. I cant see why skinomi gets in the way of pressing buttons at all.
Why is it harder to push the buttons ? do the buttons not go in all the way, maybe they should have been a little more prominent.
kusanou said:
There is a nice grip to it, and there is alot of space between the rubber part of the case and the screen for you to set on the desk on the back or face-down, I even have a nillkin glass screen protector on the front, and it lies on its front side just fine.
Click to expand...
Click to collapse
Prominent lip is apparent. Bu there is a strip there as well. So i guess the grip comes from the rubber on the edges. Would have preferred an all rubber grip.
kusanou said:
Now, the bad thing about this case is that my magnetic charging cable did not fit at all. I had no choice but to take a knife and cut off the sides, file them down a bit, and then take some elmer's glue to fill in areas where I cut too deep. After that, it fit perfectly fine, and I have no issues with it what-so-ever. Note that I am using a 3rd party charging cable, I am not sure if the original DK31 cable will fit without any modifications.
Click to expand...
Click to collapse
You've done a good job going by your pictures, can hardly tell you've done any work on it.
i suppose the official DK31 requires much more room around the port to fit better.
One Twelve said:
Can you confirm whether this is the skinomi protector you have ?
Click to expand...
Click to collapse
Yes, that is what I have.
ok, this i was not expecting to hear. I figured since the buttons were there that it would be easier than cases that only had holes which means the button now sits flush with the case requiring a more conscious press. So when i saw a case that had rubber inserts i figured easier to push as they are sitting right on top of the real ones. I cant see why skinomi gets in the way of pressing buttons at all.
Why is it harder to push the buttons ? do the buttons not go in all the way, maybe they should have been a little more prominent.
Click to expand...
Click to collapse
I attached a diagram I drew on how it works. The skinomi side guard kind of forces you to have to push a but more, that was already apparent for me for the volume and the camera shutter keys especially. I think that the bumper is also pushed out a bit more around the corners of the device, so the bumper isn't able to reach all the way, resulting in more of a need to push. The buttons on the bumper themselves are also feel a little hard as well, but I think that's just because of the side guard making me push more.
Prominent lip is apparent. Bu there is a strip there as well. So i guess the grip comes from the rubber on the edges. Would have preferred an all rubber grip.
Click to expand...
Click to collapse
I guess so, personally I like it that way, but yes, the grip would be much better had it been all rubber.
You've done a good job going by your pictures, can hardly tell you've done any work on it.
Click to expand...
Click to collapse
I guess I should have made it more clear that it was not the case that I had modified, but the cable. I will fix that in my post.
kusanou said:
I attached a diagram I drew on how it works. The skinomi side guard kind of forces you to have to push a but more, that was already apparent for me for the volume and the camera shutter keys especially.
Click to expand...
Click to collapse
I did not realise the skinomi as you pictured it in the diagram could hold onto the buttons so much. How ? its just a bit of plastic with cutouts for the buttons to go through. Unless its so tight that the buttons face resistance going through. Skinomi must have contracted after you applied it so it literally grips the buttons tighter now.
kusanou said:
I think that the bumper is also pushed out a bit more around the corners of the device, so the bumper isn't able to reach all the way, resulting in more of a need to push. The buttons on the bumper themselves are also feel a little hard as well, but I think that's just because of the side guard making me push more.
Click to expand...
Click to collapse
Would you consider removing the skinomi around the trim since you now have a bumper and you think skinomi is making it harder to operate.
kusanou said:
I guess so, personally I like it that way, but yes, the grip would be much better had it been all rubber.
Click to expand...
Click to collapse
Looks attractive or you could say its trying to preserve the original looks.
kusanou said:
I guess I should have made it more clear that it was not the case that I had modified, but the cable. I will fix that in my post.
Click to expand...
Click to collapse
Oh i must have missed that.
So...would you recommend this case ?
The ads always look a lot more attractive until somebody actually tries it and describes the experience.
One Twelve said:
I did not realise the skinomi as you pictured it in the diagram could hold onto the buttons so much. How ? its just a bit of plastic with cutouts for the buttons to go through. Unless its so tight that the buttons face resistance going through. Skinomi must have contracted after you applied it so it literally grips the buttons tighter now.
Click to expand...
Click to collapse
The buttons don't really face resistance, in fact, they have plenty of room to operate. The issue is that when you push your finger down on it, because of the skinomi, you need to push your finger further for the button to register, it has a similar feeling as to the aluminum bumper case where you have to kind of reach further in, if you get what I am saying.
Would you consider removing the skinomi around the trim since you now have a bumper and you think skinomi is making it harder to operate.
Click to expand...
Click to collapse
It doesn't bother me all too much as to remove it, however, I feel like the skinomi may come off when I remove the case to insert the sim card next month, and I'll probably throw it away then.
Looks attractive or you could say its trying to preserve the original looks.
Click to expand...
Click to collapse
That's kind of why I got this bumper in the first place.
So...would you recommend this case ?
The ads always look a lot more attractive until somebody actually tries it and describes the experience.
Click to expand...
Click to collapse
As I keep using this bumper, I'm getting used to pushing the buttons, and I'm actually liking it more and more. Grip may be an issue for some, but for me the rubber on the front and back are just fine. So long as you don't need access to the microSD or SIM card slot all of the time, and are willing to modify your magnetic cable a bit, I would definitely recommend the case. I'm sure there may be some more favorable options out there in the future, or maybe even now, but right now this is the only case that I really like, I have access to what I need, and it looks good.
kusanou said:
The buttons don't really face resistance, in fact, they have plenty of room to operate. The issue is that when you push your finger down on it, because of the skinomi, you need to push your finger further for the button to register, it has a similar feeling as to the aluminum bumper case where you have to kind of reach further in, if you get what I am saying.
Click to expand...
Click to collapse
Yes i do, you're saying skinomi is actually a lot thicker than it seems. This isn't apparent from the photo on their website. In fact i was wondering why would anyone pay so much when you could get a wet apply transparent protector for half that price. Well, sknimoi is prolly 2-3x thicker than the one i had in mind.
Skinomi I figured was good if you wanted a textured pattern rather than transparent. Now i realise since its so thick maybe its better than a thinner protector. though its overkill for the sides if you have a bumper.
kusanou said:
As I keep using this bumper, I'm getting used to pushing the buttons, and I'm actually liking it more and more. Grip may be an issue for some, but for me the rubber on the front and back are just fine. So long as you don't need access to the microSD or SIM card slot all of the time, and are willing to modify your magnetic cable a bit, I would definitely recommend the case. I'm sure there may be some more favorable options out there in the future, or maybe even now, but right now this is the only case that I really like, I have access to what I need, and it looks good.
Click to expand...
Click to collapse
This case looked attractive and functional at the same time. It tries to preserve the looks and has rounded edges rather then being blocky.
I guess durability is the question, will it last and not break easily. Given a choice between this case & a no name tpu, this one looks like it can handle a little more impact.
Grip is something i'm not sure about, more is better than less. I have not figured out what the minimum amount of grip is. But i think the Z1as it is, offers little. Sony decided looks are more important. This is why i preferred the ZL to the Z just because it felt really secure in the hand due to the textured back.
One Twelve said:
Yes i do, you're saying skinomi is actually a lot thicker than it seems. This isn't apparent from the photo on their website. In fact i was wondering why would anyone pay so much when you could get a wet apply transparent protector for half that price. Well, sknimoi is prolly 2-3x thicker than the one i had in mind.
Skinomi I figured was good if you wanted a textured pattern rather than transparent. Now i realise since its so thick maybe its better than a thinner protector. though its overkill for the sides if you have a bumper.
Click to expand...
Click to collapse
It isn't all that thick, however, just thick enough for it to be kind of an issue. I will say though that the skinomi protector I have applied to the backside gets really greasy, even if my hands are relatively clean.
This case looked attractive and functional at the same time. It tries to preserve the looks and has rounded edges rather then being blocky.
I guess durability is the question, will it last and not break easily. Given a choice between this case & a no name tpu, this one looks like it can handle a little more impact.
Grip is something i'm not sure about, more is better than less. I have not figured out what the minimum amount of grip is. But i think the Z1as it is, offers little. Sony decided looks are more important. This is why i preferred the ZL to the Z just because it felt really secure in the hand due to the textured back.
Click to expand...
Click to collapse
The lip on the back actually helps quite a bit with the grip, however, this is mostly in landscape mode if you're watching a movie or something. The sides are smooth, however, its not really slippery in any way, as the natural moisture of my hands create a sort of friction. I actually don't see myself dropping it due to it slipping out of my hands at all, this may sound weird, but with the friction, the plastic part actually feels grippier than the rubber part, even.
Nice review, I'm tempted to get it now... from the pictures it seems the case makes it look quite bulky overall?
How thick is it with the case compared to the naked phone?
Celeron787 said:
Nice review, I'm tempted to get it now... from the pictures it seems the case makes it look quite bulky overall?
How thick is it with the case compared to the naked phone?
Click to expand...
Click to collapse
I actually have pretty small hands, so the Z1 without a case was already kind of big for me, and only slightly more with the case. Most of the bulk will come from the lip on the front and back of the case that keeps the screen/back from touching the surface of whatever you put the device on. Bulk on the sides isn't very much at all
UPDATE: So I went ahead and removed the skinomi side guards, and the buttons are ever so slightly easier to press. The most noticable difference is the dedicated camera button, as it was extremely hard to push down all the way in order to launch the camera application, and use it to take images. I'm actually kind of glad that I took them off.
cool
Already ordered the black one. Its coming from DHL.
Sent from my C6903 using xda app-developers app
is it a design feature or a defect? it seems too regular to be a defect. the other two edges are flush
skinnycl said:
is it a design feature or a defect? it seems too regular to be a defect. the other two edges are flush
Click to expand...
Click to collapse
Mine has the left and right edges SLIGHTLY raised. The others are flush. Doesn't bother me really.
skinnycl said:
is it a design feature or a defect? it seems too regular to be a defect. the other two edges are flush
Click to expand...
Click to collapse
on mine the right and front side is perfect, the left sticks up quite a bit, and the back a little. I've scraped it against things a few times now and gotten drywall stuck in the lip. its very annoying. Thought of actually taking a razor blade to it!
vladthedog said:
on mine the right and front side is perfect, the left sticks up quite a bit, and the back a little. I've scraped it against things a few times now and gotten drywall stuck in the lip. its very annoying. Thought of actually taking a razor blade to it!
Click to expand...
Click to collapse
I got some paint from a wall stuck in the left lip, but was able to clean it with a fingernail after removing it from the band.
Hi,
I got my Z Fold3 this week and I've been loving it! I got it with the Flip Cover (S Pen included) case, however, and I was not very happy with that. The flip on front almost never actually stays on top of the screen and it adds a tremendous am https://1921681001.id/ ount of akward bulk when used in folded mode. I've been reading other posts on t https://19216811.cam/ his Reddit and looking through reviews, but I've still had trouble deciding the best case for me. My only necessity is that it protects the phone from at least minor drops just in case, but along with that here are some things that would be preferable:
It doesn't need adhesives (most importantly, though, it stays attached to the Fold without issue even after a while).
It provides hinge protection.
Doesn't cover/make unaccessable too much of the front screen.
If it has hinge protection, I'd prefer that to at least let me put one half flat on a table when folded like a DS (aka I wanna be able to put it on a desk like a laptop).
Either an optional method of bringing my S Pen or a stand would be neat (least needed of these 5).
With all that in mind, even if no case perfectly meets all my wants, what would you all say is my best bet?
araree nukin360
make sure it's the new version, with raised bezel on the hind cameras, no squeaky sounds, no loose parts
jemfalor said:
araree nukin360
make sure it's the new version, with raised bezel on the hind cameras, no squeaky sounds, no loose parts
Click to expand...
Click to collapse
pieces of cake said:
What a perfect reply. Excellent. Flawless.
Click to expand...
Click to collapse
i doubt there's a need for me to point out it fits all the five points. also, there are two versions of this case out in the open. just make sure it's not the initial version with loose front case, squeaky when carried.
jemfalor said:
i doubt there's a need for me to point out it fits all the five points. also, there are two versions of this case out in the open. just make sure it's not the initial version with loose front case, squeaky when carried.
Click to expand...
Click to collapse
Apparently the hinge panels crack pretty easily. Particularly the one that holds the S Pen.
pieces of cake said:
Apparently the hinge panels crack pretty easily. Particularly the one that holds the S Pen.
Click to expand...
Click to collapse
dropped my phone twice with it. no cracked hinge. the initial version does have a hinge getting loose holding the spen when folded over time. probably because of the pressure exerted on it while carrying.
karbomike said:
Hi,
I got my Z Fold3 this week and I've been loving it! I got it with the Flip Cover (S Pen included) case, however, and I was not very happy with that. The flip on front almost never actually stays on top of the screen and it adds a tremendous am https://1921681001.id/ ount of akward bulk when used in folded mode. I've been reading other posts on t https://19216811.cam/ his Reddit and looking through reviews, but I've still had trouble deciding the best case for me. My only necessity is that it protects the phone from at least minor drops just in case, but along with that here are some things that would be preferable:
It doesn't need adhesives (most importantly, though, it stays attached to the Fold without issue even after a while).
It provides hinge protection.
Doesn't cover/make unaccessable too much of the front screen.
If it has hinge protection, I'd prefer that to at least let me put one half flat on a table when folded like a DS (aka I wanna be able to put it on a desk like a laptop)one Either an optional method of bringing my S Pen or a stand would be neat (least needed of these 5).
With all that in mind, even if no case perfectly meets all my wants, what would you all say is my best bet?
Click to expand...
Click to collapse
SpeckPresidio, one piece no adhesive
I'm still looking. Had the Samsung silicone cover initially, but the front frame yellowed (was white) and turned brittle and broke. Now have the Spigen Air Skin, but it has the adhesive for the front cover, and it doesn't hold on anymore and cover slips off all the time.