Related
Hey Guys and Girls,
I just got my Galaxy S III a month ago and I am developing a problem I can't seem to figure out. On the edges of the phone, where the glass meets the blue plastic I am getting a build up of dirt. I keep my hands very clean as I am super OCD about my devices. With that being said, I am getting dirt and "grime" build up in the sides. Sometimes it's hard to notice but it becomes clearer as more days go on. I have contacted Samsung and they were unwilling to decide what it was without seeing it. I contacted my carrier who sent me a replacement after ten or more calls. The new device seems to suffer the same fate. I am wondering if anyone else is having this problem or knows how to get rid of it. I tried to clean it with an air canister with no luck and plenty of sharp objects. None which would do a great job, the only thing that came close was a toothbrush and that was difficult to say the least. Is this a known problem or am I getting more defective devices. Thanks for your input.
P.S- I know the photo isn't great and I will take more to show the effects. It is most noticeable in the corners, the sides, and around the speaker and home button.
Appreciate the help!
I don't have any issues and I have the white one, so it should be more obvious.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
annulation said:
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
Click to expand...
Click to collapse
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
chaoticfury said:
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
Click to expand...
Click to collapse
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Before I had a case I didn't have this issue. The gap isn't very noticeable. I have a Diztronic TPU case now ($10 Amazon) and it has a small lip which covers that gap. Maybe you have dirty pockets or a batch of phones that just had a slightly larger gap.
zmore said:
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Click to expand...
Click to collapse
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
chaoticfury said:
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Click to expand...
Click to collapse
It can't get behind the screen because it's one piece, so don't worry about that.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Yeah, many of the hard polycarb cases -- like Samsung's mesh case, or the popular Rock Quicksand -- that offer little edge protection don't cover the the entire lip because they can't. All TPU and hybrid cases do, though.
chaoticfury said:
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
AngelsNecropolis said:
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
Click to expand...
Click to collapse
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
chaoticfury said:
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
Click to expand...
Click to collapse
Np. I use this case. http://www.amazon.com/Diztronic-Fle...54&sr=8-7&keywords=diztronic+galaxy+s+III+tpu The matte feel is nice and it comes with a screen protector which I applied and it's good quality as well. It doesn't attract as much finger prints as other screen protectors I've used and it's very clear.
Off Topic:
But... even with a TPU case you'll have to be careful of drops. Gorilla Glass isn't as strong as it's touted to be against sudden impacts (watch iPhone5 vs Samsung Galaxy S III drop test). My GSII got a small scratch prior to applying a protector and just today a coworker dropped her GSII on concrete and the TPU case didn't stop the screen from severely cracking. It will protect from a lot of surface scratches though. My mom just got her first smart phone (a Pantech) and dropped it and it slid across the floor. I hadn't gotten her screen protector yet and her screen has some small scratches and nicks.
I guess my point is even if it reduces the aesthetics get a case, a screen protector, and be careful still.
I ordered that case like you suggested but it has yet to arrive. The replacement phone I got from my carrier is having even worse problems than my first one. I was even more careful with this than the others. Not really sure what to do. I am intrigued by the fact that I see nobody who has a white GS3 post problems about it. I wonder if the blue is the only one with these kind of issues.
I've got a blue one and don't have that problem
Galaxy SIII via XDA premium
This thread on tight fitting cases might be helpful.
I have. White phone no such issues I also noticed the white button sticks out a bit more.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
cboone said:
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Going to see if I can get a white. I prefer blue but I hate this problem.
Mine collects dust too and I use a Rock case. I'd clean it if I could, but I can't seem to fit paper or anything in to push it out either. It's hardly visible, not putting too much thought in to it.
So, I ordered this bumper case on Christmas Eve, and it ended up taking 15 business days for me to receive it, due to delays and because the product was being shipped from the UK, while I live in the US.
The case consists of plastic/TPU like frame with rubber going around it. The case was actually quite hard for me to put on, however, I think it might be because I have a skinomi full body protector on it, so it does take a bit of a push to get it in. Another thing is, the power and volume buttons can be kind of hard to push, and the camera button especially, but once again, I have a protective skin on the inside, so it is harder for me than it may be for you if you do not have one on it. I have attached a diagram that may give a better idea on this issue.
There is a nice grip to it, and there is alot of space between the rubber part of the case and the screen for you to set on the desk on the back or face-down, I even have a nillkin glass screen protector on the front, and it lies on its front side just fine.
Now, the bad thing about this case is that my magnetic charging cable did not fit at all. I had no choice but to modify the cable. I took a knife and cut off the sides, filed them down a bit, and then take some elmer's glue to fill in areas where I cut too deep. After that, it fit perfectly fine, and I have no issues with it what-so-ever. Note that I am using a 3rd party charging cable, I am not sure if the original DK31 cable will fit without any modifications.
The case comes in black, white, and purple. I have attached the links to the case and the respective colors below, as well as pictures of my own. Pictures were taken with my sister's Nexus 5 on 4.4.2 Stock KitKat.
Black:
http://www.mobilefun.co.uk/metal-slim-bumper-frame-for-sony-xperia-z1-black-p41877.htm
White:
http://www.mobilefun.co.uk/metal-slim-bumper-frame-for-sony-xperia-z1-white-p41878.htm
Purple:
http://www.mobilefun.co.uk/metal-slim-bumper-frame-for-sony-xperia-z1-purple-p41879.htm
UPDATE: So I went ahead and removed the skinomi side guards, and the buttons are ever so slightly easier to press. The most noticable difference is the dedicated camera button, as it was extremely hard to push down all the way in order to launch the camera application, and use it to take images. I'm actually kind of glad that I took them off.
Case Review
One of the best reviews i have seem for this case! My friend actually just got this case today and had the same problem with the magnetic charging port. They should have checked that out prior to release XD. Anyways, Solid review. Thanks granted
kusanou said:
The case consists of plastic/TPU like frame with rubber going around it. The case was actually quite hard for me to put on, however, I think it might be because I have a skinomi full body protector on it, so it does take a bit of a push to get it in.
Click to expand...
Click to collapse
Can you confirm whether this is the skinomi protector you have ?
kusanou said:
Another thing is, the power and volume buttons can be kind of hard to push, and the camera button especially, but once again, I have a protective skin on the inside, so it is harder for me than it may be for you if you do not have one on it.
Click to expand...
Click to collapse
ok, this i was not expecting to hear. I figured since the buttons were there that it would be easier than cases that only had holes which means the button now sits flush with the case requiring a more conscious press. So when i saw a case that had rubber inserts i figured easier to push as they are sitting right on top of the real ones. I cant see why skinomi gets in the way of pressing buttons at all.
Why is it harder to push the buttons ? do the buttons not go in all the way, maybe they should have been a little more prominent.
kusanou said:
There is a nice grip to it, and there is alot of space between the rubber part of the case and the screen for you to set on the desk on the back or face-down, I even have a nillkin glass screen protector on the front, and it lies on its front side just fine.
Click to expand...
Click to collapse
Prominent lip is apparent. Bu there is a strip there as well. So i guess the grip comes from the rubber on the edges. Would have preferred an all rubber grip.
kusanou said:
Now, the bad thing about this case is that my magnetic charging cable did not fit at all. I had no choice but to take a knife and cut off the sides, file them down a bit, and then take some elmer's glue to fill in areas where I cut too deep. After that, it fit perfectly fine, and I have no issues with it what-so-ever. Note that I am using a 3rd party charging cable, I am not sure if the original DK31 cable will fit without any modifications.
Click to expand...
Click to collapse
You've done a good job going by your pictures, can hardly tell you've done any work on it.
i suppose the official DK31 requires much more room around the port to fit better.
One Twelve said:
Can you confirm whether this is the skinomi protector you have ?
Click to expand...
Click to collapse
Yes, that is what I have.
ok, this i was not expecting to hear. I figured since the buttons were there that it would be easier than cases that only had holes which means the button now sits flush with the case requiring a more conscious press. So when i saw a case that had rubber inserts i figured easier to push as they are sitting right on top of the real ones. I cant see why skinomi gets in the way of pressing buttons at all.
Why is it harder to push the buttons ? do the buttons not go in all the way, maybe they should have been a little more prominent.
Click to expand...
Click to collapse
I attached a diagram I drew on how it works. The skinomi side guard kind of forces you to have to push a but more, that was already apparent for me for the volume and the camera shutter keys especially. I think that the bumper is also pushed out a bit more around the corners of the device, so the bumper isn't able to reach all the way, resulting in more of a need to push. The buttons on the bumper themselves are also feel a little hard as well, but I think that's just because of the side guard making me push more.
Prominent lip is apparent. Bu there is a strip there as well. So i guess the grip comes from the rubber on the edges. Would have preferred an all rubber grip.
Click to expand...
Click to collapse
I guess so, personally I like it that way, but yes, the grip would be much better had it been all rubber.
You've done a good job going by your pictures, can hardly tell you've done any work on it.
Click to expand...
Click to collapse
I guess I should have made it more clear that it was not the case that I had modified, but the cable. I will fix that in my post.
kusanou said:
I attached a diagram I drew on how it works. The skinomi side guard kind of forces you to have to push a but more, that was already apparent for me for the volume and the camera shutter keys especially.
Click to expand...
Click to collapse
I did not realise the skinomi as you pictured it in the diagram could hold onto the buttons so much. How ? its just a bit of plastic with cutouts for the buttons to go through. Unless its so tight that the buttons face resistance going through. Skinomi must have contracted after you applied it so it literally grips the buttons tighter now.
kusanou said:
I think that the bumper is also pushed out a bit more around the corners of the device, so the bumper isn't able to reach all the way, resulting in more of a need to push. The buttons on the bumper themselves are also feel a little hard as well, but I think that's just because of the side guard making me push more.
Click to expand...
Click to collapse
Would you consider removing the skinomi around the trim since you now have a bumper and you think skinomi is making it harder to operate.
kusanou said:
I guess so, personally I like it that way, but yes, the grip would be much better had it been all rubber.
Click to expand...
Click to collapse
Looks attractive or you could say its trying to preserve the original looks.
kusanou said:
I guess I should have made it more clear that it was not the case that I had modified, but the cable. I will fix that in my post.
Click to expand...
Click to collapse
Oh i must have missed that.
So...would you recommend this case ?
The ads always look a lot more attractive until somebody actually tries it and describes the experience.
One Twelve said:
I did not realise the skinomi as you pictured it in the diagram could hold onto the buttons so much. How ? its just a bit of plastic with cutouts for the buttons to go through. Unless its so tight that the buttons face resistance going through. Skinomi must have contracted after you applied it so it literally grips the buttons tighter now.
Click to expand...
Click to collapse
The buttons don't really face resistance, in fact, they have plenty of room to operate. The issue is that when you push your finger down on it, because of the skinomi, you need to push your finger further for the button to register, it has a similar feeling as to the aluminum bumper case where you have to kind of reach further in, if you get what I am saying.
Would you consider removing the skinomi around the trim since you now have a bumper and you think skinomi is making it harder to operate.
Click to expand...
Click to collapse
It doesn't bother me all too much as to remove it, however, I feel like the skinomi may come off when I remove the case to insert the sim card next month, and I'll probably throw it away then.
Looks attractive or you could say its trying to preserve the original looks.
Click to expand...
Click to collapse
That's kind of why I got this bumper in the first place.
So...would you recommend this case ?
The ads always look a lot more attractive until somebody actually tries it and describes the experience.
Click to expand...
Click to collapse
As I keep using this bumper, I'm getting used to pushing the buttons, and I'm actually liking it more and more. Grip may be an issue for some, but for me the rubber on the front and back are just fine. So long as you don't need access to the microSD or SIM card slot all of the time, and are willing to modify your magnetic cable a bit, I would definitely recommend the case. I'm sure there may be some more favorable options out there in the future, or maybe even now, but right now this is the only case that I really like, I have access to what I need, and it looks good.
kusanou said:
The buttons don't really face resistance, in fact, they have plenty of room to operate. The issue is that when you push your finger down on it, because of the skinomi, you need to push your finger further for the button to register, it has a similar feeling as to the aluminum bumper case where you have to kind of reach further in, if you get what I am saying.
Click to expand...
Click to collapse
Yes i do, you're saying skinomi is actually a lot thicker than it seems. This isn't apparent from the photo on their website. In fact i was wondering why would anyone pay so much when you could get a wet apply transparent protector for half that price. Well, sknimoi is prolly 2-3x thicker than the one i had in mind.
Skinomi I figured was good if you wanted a textured pattern rather than transparent. Now i realise since its so thick maybe its better than a thinner protector. though its overkill for the sides if you have a bumper.
kusanou said:
As I keep using this bumper, I'm getting used to pushing the buttons, and I'm actually liking it more and more. Grip may be an issue for some, but for me the rubber on the front and back are just fine. So long as you don't need access to the microSD or SIM card slot all of the time, and are willing to modify your magnetic cable a bit, I would definitely recommend the case. I'm sure there may be some more favorable options out there in the future, or maybe even now, but right now this is the only case that I really like, I have access to what I need, and it looks good.
Click to expand...
Click to collapse
This case looked attractive and functional at the same time. It tries to preserve the looks and has rounded edges rather then being blocky.
I guess durability is the question, will it last and not break easily. Given a choice between this case & a no name tpu, this one looks like it can handle a little more impact.
Grip is something i'm not sure about, more is better than less. I have not figured out what the minimum amount of grip is. But i think the Z1as it is, offers little. Sony decided looks are more important. This is why i preferred the ZL to the Z just because it felt really secure in the hand due to the textured back.
One Twelve said:
Yes i do, you're saying skinomi is actually a lot thicker than it seems. This isn't apparent from the photo on their website. In fact i was wondering why would anyone pay so much when you could get a wet apply transparent protector for half that price. Well, sknimoi is prolly 2-3x thicker than the one i had in mind.
Skinomi I figured was good if you wanted a textured pattern rather than transparent. Now i realise since its so thick maybe its better than a thinner protector. though its overkill for the sides if you have a bumper.
Click to expand...
Click to collapse
It isn't all that thick, however, just thick enough for it to be kind of an issue. I will say though that the skinomi protector I have applied to the backside gets really greasy, even if my hands are relatively clean.
This case looked attractive and functional at the same time. It tries to preserve the looks and has rounded edges rather then being blocky.
I guess durability is the question, will it last and not break easily. Given a choice between this case & a no name tpu, this one looks like it can handle a little more impact.
Grip is something i'm not sure about, more is better than less. I have not figured out what the minimum amount of grip is. But i think the Z1as it is, offers little. Sony decided looks are more important. This is why i preferred the ZL to the Z just because it felt really secure in the hand due to the textured back.
Click to expand...
Click to collapse
The lip on the back actually helps quite a bit with the grip, however, this is mostly in landscape mode if you're watching a movie or something. The sides are smooth, however, its not really slippery in any way, as the natural moisture of my hands create a sort of friction. I actually don't see myself dropping it due to it slipping out of my hands at all, this may sound weird, but with the friction, the plastic part actually feels grippier than the rubber part, even.
Nice review, I'm tempted to get it now... from the pictures it seems the case makes it look quite bulky overall?
How thick is it with the case compared to the naked phone?
Celeron787 said:
Nice review, I'm tempted to get it now... from the pictures it seems the case makes it look quite bulky overall?
How thick is it with the case compared to the naked phone?
Click to expand...
Click to collapse
I actually have pretty small hands, so the Z1 without a case was already kind of big for me, and only slightly more with the case. Most of the bulk will come from the lip on the front and back of the case that keeps the screen/back from touching the surface of whatever you put the device on. Bulk on the sides isn't very much at all
UPDATE: So I went ahead and removed the skinomi side guards, and the buttons are ever so slightly easier to press. The most noticable difference is the dedicated camera button, as it was extremely hard to push down all the way in order to launch the camera application, and use it to take images. I'm actually kind of glad that I took them off.
cool
Already ordered the black one. Its coming from DHL.
Sent from my C6903 using xda app-developers app
Are there any case haterz on this forum, who run their phones without any kind of cases / back stickers etc ?
Could you post some photos, facts, knowledge how well the phone stands everyday usage ?
I have been using case since day one, but i just can't stand it anymore. Did I buy alluminium phone to put it in rubber case or stick plastic sheet of foil on it to lose the feeling of alluminium ? No !
I drop my phone very rarely, actually i have never droppped it (knock knock), only time it hit ground it was clumsy bird's (jokin clumsy friend's hands) fault. My only concern is lens protector. On one side its nicely hidden in the rim, but at the other lens cover is protruding just a very litle bit. I am attaching picture to illustrate it a bit. It is side look.
There's a "hole" in the phone body, so the lens should be all hidden / drown and there should be 1 milimeter gap, when i place phone on table. On one side there is, on other lens is in line with body.
Grey - phone
White - gap for lens cover
Black - lens cover
Mods, please do not delete this topic - this has already happened in past (moved to accesories thread), but it get lost very easily, i try to debate with users without accesories.
Thanks
i did for apprx 4 months when i first bought the device, now i'm using crystal clear case to not to hide devices body.
i bought a case after i saw scratches on camera lens, luckly camera lens got replaced after service for red tint.
also shiny exposed alumium around the device got scratched and deformed a bit.
I also am not a fan of big bulky cases. One of the main reasons I bought this phone is because it is so damn beautiful (compared to most other phones). I've always joked about how iPhone fans typically rave about how "sleek" and "thin" their phones are, yet they walk around with them wearing the equivalent of a down-filled parka that is anything but "sleek".
I did compromise a bit, just because I want to keep my phone looking nice. I found the Cimo clear case. It is very thin, and very clear. It has just enough of a "lip" around the edge so that the screen of the phone won't contact the ground when it is lying down (or dropped on its face). The soft rubbery cushioning should also protect against dings on the corners and back, as well as prevent scratches. All without sacrificing the beauty of the phone. I paid $10 on Amazon for it.
NEH,
I did not buy a unibody aluminium finish phone to hide it behind chinese plastic covers. Thats not my style. I have pretty much the same type of use like yours. The only thing that has happened with me is that the beats audio red sticker at the behind bottom plate is now fading off. Nothing else. Just keep keys/card holder and coins in other pocket. I dont think you need a plastic cover.
When I had my One I used the HTC hard shell - minimal design but clear so you could still see the phone. Best case I had IMO
http://shop.emea.htc.com/uk/p_htc_store_product.aspx?i=251537
Whether you can still get it is another question
I've been using this case works well still shows the phones great looks and protect it all around.
HTC One
Guys, thanks for all the replies.
But this thread is strictly about naked devices - no cases at all !
well ii put a case on it.... next time its still usable years down the road
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
jaqual said:
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
Click to expand...
Click to collapse
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
never ever use a case defeats point of having such a wonderful design,have a leather pouch when not in us and just treat it like a baby when in use 6 months on still pristine not a mark
Sent from my Transformer TF101 using XDA Premium 4 mobile app
remusator said:
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
Click to expand...
Click to collapse
My lens cover is slightly recessed, so no, not like you, but haven't had any damage to it. No pouch or anything, just keep it in my pocket with my change.
Sent from space...
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
[1] said:
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Click to expand...
Click to collapse
this is how i use mine. transparent cover over the back which i only put on because the aluminum is actually very slippery for me and the clear skin provides better grip so i dont drop it. clear cover over the screen and im good to go. few small areas around the front bevel where the blue has worn away but other than that its prefect. i never use a case, defeats the purpose of having a thin phone.
I Have been using it without cover, but in December it has fallen on the road so i ordered some cheap one from the e-bay.
So now, i am using it with cover, but i lost that great metal feeling of the phone.
Here is an example with and without cover
http://i.cubeupload.com/KydqLb.jpg
I don't use a case at all makes it easier to use the volume and power button
Sent from my Verizon HTC One using Tapatalk
I use no covers, just matte screen protector (I like the way my display looks with it). Bought it in June 2013. It fell on the floor several times, it got only one scratch on the top (on the lright corner), but it still looks amazing! As it's always in my pocket, lately the "beats audio" logo on the back is going away slowly... but i use nothing to protect it
NxNW said:
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
Click to expand...
Click to collapse
+1. Dont know how long I would keep the phone. But while I have it might as well enjoy the quality feel of it.
My HTC One is about two weeks old. I love it so much, I can't bring myself to cover this baby up.
Also, I am paying for a warranty, so if anything happens to it I'll get a new one, or maybe the M8 if they run out =D
Hello,
So I got a case from ArmadilloTek.
I got the Vanguard Series Case in Orange for my S10+
Can find link here:
https://www.amazon.com/gp/product/B07MLZW7XQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I took advantage from an earlier post about getting one for free in exchange for feedback.
Packaging:
Looks just like an otterbox package. Not that matters to me.
Packaging did seem a little "loose" a lot of movement on the inside.
Other than that, thats about it for the package.
The case was not put together it was separated by a piece of hard styrofoam.
I like cases that you dont have to take apart first.
Also came with a note that looks like it was hand written and then copied to go out to everyone. Nice little idea.
Pros:
The color matches almost 100% the color on the details page which is nice.
Little groove arrows on the side do make it for easier handling. I do like that design, some may not.
Back of case Design:
The camera cut out is nice, and does not interfere with the camera abilities and does not affect the camera flash either.
The bottom flaps for Headphone and Charging port are easy to open. and they feel very well made that wont break off with just few uses.
Buttons: All the buttons work with normal pressing. No hard press, or squeezing of the phone to make them work.
Front:
The case sits up on the phone, creating space from the screen and any surface that it will be against. So i like this design.
Even with the higher bezels for the case it does not interfere with the top notification bar being pulled down, or activating the edge screen.
The case looks to be very durable, but I do not plan on testing that out on purpose. But, if i do drop it I will report back with my review after.
Case is real easy to clean. I got it pretty dirty and use an alcohol wipe to clean it and it wiped right off.
Works just like normal for wireless charging and wireless power sharing.
Cons:
Does add extra weight to the device
Kickstand feels a little flimsy, thinking prolonged use could break it, also, it could have been a rotating one with a ring style since alot of companies are adding those now. That would make for easier use. (may only be a con for me)
Corners are kind of Squared, not rounded, so I feel it gets caught a little in the pocket. Works well in jeans, but gyms clothes and dress pants it gets caught up in them.
Overall I would rate this easy at 4.5* out of 5*
If you have one, or had one, or are looking to get one drop a comment here and lets chat about it.
Do they have the orange without the kickstand?
felloffthetruck said:
Do they have the orange without the kickstand?
Click to expand...
Click to collapse
No they all have kickstands, they have all black, blue, orange, pink, purple, yellow, white and red.
They do have another case, that is called the Urban Ranger, its a TPU case, no kickstand.
https://forum.xda-developers.com/s10-plus/accessories/samsung-galaxy-s10-plus-t3905296/post79587900
Looks similar to my SupCase (https://www.amazon.it/gp/product/B07N4LKB3F/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) which is a massive cover but offers a pretty good protection.
I don't have a wireless charger (I only charge vua USB cable) but I couldn't charge my Gear S3 with Wireless PowerShare. Removing the cover the watch can be correctly charged.
Someone had similar issues ?
Thanks
S
primus123 said:
Hello,
So I got a case from ArmadilloTek.
I got the Vanguard Series Case in Orange for my S10+
Can find link here:
https://www.amazon.com/gp/product/B07MLZW7XQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I took advantage from an earlier post about getting one for free in exchange for feedback.
Packaging:
Looks just like an otterbox package. Not that matters to me.
Packaging did seem a little "loose" a lot of movement on the inside.
Other than that, thats about it for the package.
The case was not put together it was separated by a piece of hard styrofoam.
I like cases that you dont have to take apart first.
Also came with a note that looks like it was hand written and then copied to go out to everyone. Nice little idea.
Pros:
The color matches almost 100% the color on the details page which is nice.
Little groove arrows on the side do make it for easier handling. I do like that design, some may not.
Back of case Design:
The camera cut out is nice, and does not interfere with the camera abilities and does not affect the camera flash either.
The bottom flaps for Headphone and Charging port are easy to open. and they feel very well made that wont break off with just few uses.
Buttons: All the buttons work with normal pressing. No hard press, or squeezing of the phone to make them work.
Front:
The case sits up on the phone, creating space from the screen and any surface that it will be against. So i like this design.
Even with the higher bezels for the case it does not interfere with the top notification bar being pulled down, or activating the edge screen.
The case looks to be very durable, but I do not plan on testing that out on purpose. But, if i do drop it I will report back with my review after.
Case is real easy to clean. I got it pretty dirty and use an alcohol wipe to clean it and it wiped right off.
Works just like normal for wireless charging and wireless power sharing.
Cons:
Does add extra weight to the device
Kickstand feels a little flimsy, thinking prolonged use could break it, also, it could have been a rotating one with a ring style since alot of companies are adding those now. That would make for easier use. (may only be a con for me)
Corners are kind of Squared, not rounded, so I feel it gets caught a little in the pocket. Works well in jeans, but gyms clothes and dress pants it gets caught up in them.
Overall I would rate this easy at 4.5* out of 5*
If you have one, or had one, or are looking to get one drop a comment here and lets chat about it.
Click to expand...
Click to collapse
Very good for curved screen full body protectors, the way you lay the frame down overtop first then snap the case in.
It is very difficult to use the edge panels and One Hand Operation+ with this case. The Supcase UB Pro has less of a side lip, which makes it easier to swipe the curved edges and therefore use these features. FYI.
Dr. Fed said:
It is very difficult to use the edge panels and One Hand Operation+ with this case. The Supcase UB Pro has less of a side lip, which makes it easier to swipe the curved edges and therefore use these features. FYI.
Click to expand...
Click to collapse
Thanks for the alternate case.
I havent had any issues with the edge screen.
I do however have the edge panel slider at full thickness, I wonder if that plays a big part of it.
Have you tried enlarging the edge panel slider?
why dont they provide screen protector like OTTERBOX?
taoisawesome said:
why dont they provide screen protector like OTTERBOX?
Click to expand...
Click to collapse
If you mean a "tempered glass" protector, they omit it because standard ones block the fingerprint reader. One company made a tempered glass screen protector that purportedly works with the fingerprint reader. Unfortunately, they have a patent and it cost around/above $50.
primus123 said:
Thanks for the alternate case.
I havent had any issues with the edge screen.
I do however have the edge panel slider at full thickness, I wonder if that plays a big part of it.
Have you tried enlarging the edge panel slider?
Click to expand...
Click to collapse
I can make my edge panel handle longer or shorter, and I can change it's position. However, I cannot make it thicker or thinner.
Dr. Fed said:
I can make my edge panel handle longer or shorter, and I can change it's position. However, I cannot make it thicker or thinner.
Click to expand...
Click to collapse
I check app log, seems it updated about a week ago.
There was a function that the edge panel could become thicker, not just longer.
That function is no longer there.
I do notice now that my panel is much smaller than it was previously, actually making it harder to activate the edge panel.
Hmmm, weird.
primus123 said:
I check app log, seems it updated about a week ago.
There was a function that the edge panel could become thicker, not just longer.
That function is no longer there.
I do notice now that my panel is much smaller than it was previously, actually making it harder to activate the edge panel.
Hmmm, weird.
Click to expand...
Click to collapse
the new update has new issues, sigh
Thank you for your review, We already change our design, all the kickstand ON Note 10 and future models WILL BE STRONGER!
Wanted to share with you all, a really good case that is worth the money for this phone, and I am really happy with it.
The case is intended to put on and leave on, hence the adhesive films on the inside of the front cover, the back (with yellow cushioning) just clips on with a strong solid tight fit. The front cover bezel/lip looks to be about 2.5-3mm deep, but accessing the right side soft menu still good. My finger size is about average/medium size and I have no problem also accessing the power button and fingerprint sensor on the side beside the s-pen.
Used the glue adhesives on the front screen that were already applied, just had to pull off the backings (They also included an extra set of glue adhesive strips for a second mount if you ever need to take off and put back on) and it fits perfect, lines up with all the holes and speaker grills. The back piece with the hinge cover (with 2 spring loaded hinges), protects the back and fold hinge while the lip around the camera protects the camera lenses. It too also has perfect alignment with holes and has lots of clearance with the USB C port fitting. The hinge cover protector also gives you something to hold/grip when the phone is unfolded.
Suggest you first get a front glass screen protector (I used the Spigen Glastr Ez Fit for perfect alignment and easy application) for the front and camera lenses protectors also before applying this case.
This quality case feels very good, smooth, solid, elegant, and provides a great grippy feel. More importantly, I feel more confident holding the phone with this case on, as it feels like it could weather some accidental mishaps and protect the phone.
In my pictures, you will notice I also put a pop socket on the back centre for four reasons:
1) use for general holding in hand, even more support than the hinge cover protection bump when fully open
2) use as a kick stand for front screen and/or the unfolded full screen
3) use for a magnetic mount that I have in my car - so phone can sit in folded vertical or horizontal orientation and also unfolded orientation, using a pop socket flat mount with the metal plate stuck on the back of it- I just slide my pop socket into the pop socket flat mount holder and then attach to the magnetic mount, which also allows me to:
4) wireless charge at home, by twisting the top half of the pop socket half a turn to remove, when it is pushed in, which will allow a closer clearance for wireless charging through the case as it is all plastic
One critical point based on the design of the spring loaded hinge cover protector, when you do unfold/open the phone to full screen, and you are using the back screen for taking a selfie, you loose about 1 cm of view area on the left of the front screen. This minor con is something I can live with as this is in only this situation and for the design, it is a great compromise having that hinge protection.
In closing, I am really happy I got this case. I was originally worried that it might be too bulky, eventually ending up removing it for a thinner/smaller case, but I think it has a great balance of protection, holds the s-pen on the front side of screen keeping it's thickness down (compared to the Samsung pen/kickstand case, or others in some cases), and one of the few cases that protects the hinge, allowing the phone full protection around the whole phone. Hopefully you found this helpful for your situation.
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
I read a lot about people having a challenge to pull the case cover off on the Z fold 3, some had glued the back on also which the current 4 version doesn't have or need, as it snaps on pretty good, but some with the 3 did use the glue strips which made it a challenge to get off. I can't speak to this Z fold 4 vs the 3 case, but having used it a couple of days, I still think it is a solid quality case.
It is a "little" thicker than the Samsung pen case, but not by much, and the pen holder on the Spigen sits in a nice place compared to the Samsung making it thinner right away, even with the hinge on the back when opened up. I understand why they need the glue adhesive on the front protection cover, as it needs to stay locked on especially when you are pulling on the s-pen constantly. What I really like is that it does protect the Fold's hinge area also... the Latercase is super thin, so less protection and the hinge is susceptible when folded with mishaps and for me I use both the front and the inside about the same. I can't see me taking the front cover off for a long time and don't think I will need to clean from the inside on the front panel as the fit is super tight, but the back can be snapped off easily if necessary. There are a lot of people that have used the Latercase as it is thin and has good grip, but doesn't have the "bunker" safety. As I mentioned in my closing casual review, I was afraid the size of the case would be too much for the protection it offers, but it is a lot better than I thought it would be in terms of weight/thickness and with the hinge protection and great pen storage location, I am very happy with it.
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
Had the same issue with mine. Damaged and scratched my z fold 3 due to the case adhesive.
Tried to go another route for my fold 4 and got the vrs terra guard modern case, It looked alright & initially I was happy as it had Good Protection. It felt more plasticy than the spigen version but i liked the design so ignored the finish.
Over my 4 days of use I found that the magnets in the hinge created big dead spots in the inner screen where the S-Pen wouldn't register.
Screen protector included is much smaller than the active screen area. (So basically useless)
The hinge created a weird noise while opening and closing which i ignored and it eventually broke after 4 days of use (the hinge created tension in the plastic holding it and lifted the inner base of the case and broke).
Thankfully no damage to the phone.
I'll probably try the iblason or supcase I saw on some youtube channels they looked solid and only had one small piece of adhesive tape for the top cover.
Syd91 said:
Screen protector included is much smaller than the active screen area. (So basically useless)
Click to expand...
Click to collapse
Spigen screen protector for the outer small screen is very good. Although its not edge to edge which will hinder with cases.
_GRIZZLY_ said:
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
Click to expand...
Click to collapse
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
jonstatt said:
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
Click to expand...
Click to collapse
Interesting, so in this case scratches problem can be unfortunetly hard to resolve.
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
For its price, its terribly expensive. There are cases just like it for 30% less money that use magnets on the hinge instead of glue, and the material feels better. I feel as though Spigen rips people off and they must have massive profit margins if you see the cases that show up on amazon and aliexpress.
What case do you recommend then?
Q-Prof said:
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
Click to expand...
Click to collapse
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
elio321 said:
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
Click to expand...
Click to collapse
Hey Elio,
Congrats on getting the Z Fold 4,
No issues with the finger print reader, I have average sized hands and thumb works all the time, there is enough room. Yes it is expensive, but well worth it, you wont feel ripped off as it is excellent quality, and there is no other design out there that has this unique set of design features. The case feels really good in the hand (not plastic feel... more of a smooth rubbery feel, so great grip) and it fits like a glove on the case. As for charging wirelessly, no problem... I even have a removable pop socket and an ESR phone boost kickstand, and still no problem charging after I remove the top of the pop socket (just a quick 1/2 twist when it is pushed in). Not only easier access to the pen, but better placement in my opinion, I would rather have a little wider than making it thicker... it already is thick because of the fold design... so why put a storage s-pen on the back... and putting it in the hinge protector like some designs makes the hinge protector a huge bump on the back when open.
I have very negative experience with the Spigen cover cases for Fold 4. The first one, the Tough Armor got broken after 16 days. The second one, the Slim Armor Pro got broken today after 4 months. Totally, I lost almost 150€ for these two cases ;-( I will request replacement. My conclusion is there is no way to make a good unbreakable cover case for Fold 4. For my previous non-foldable phones the Spigen cover cases where perfect.