hi
i am newbie and i am trying to install kitkat rom provide by restless from the link below:
http://forum.xda-developers.com/gal...-10/rom-100-stock-4-4-2-kitkat-p5200-t2866066
I am using Philz recovery and below is procedure i am doing.
1) copy rom to SDcard.
2) boot into recovery
3) wipe cache
4) wipe davrt
5) wipe for new installation rom
6) select install zip and then select the zip file and install the rom
after the upgrade/update and rebooting the tab is stuck at samsung logo.
I will really appreciate any help
thanks
Bump
Same thing happened to me when reverting back to 4.2.2.
Hold down pwer and volume up to get into recovery . Do a factory reset. Then boot to sytem. Worked for me.
Related
hi everyone,
I have a problem with my GALAXY WODER I8150 a CM10 alpha 4.1, it stuck on loading screen, before the problem occur I downloaded the "COMBINE MODS MODEL-1" for CM10 alpha 7.. after I boot it and flash using CWM it only run trough loading screen and it always stuck..
I tried to reflash it using ODIN and used the firmware of my phone afterwards my phone still stuck on Loading screen
Please help me with this
thanks
try go to recovery mode and
1. wipe cache
2. go to advance and /format dalvik cache
emmerson00 said:
hi everyone,
I have a problem with my GALAXY WODER I8150 a CM10 alpha 4.1, it stuck on loading screen, before the problem occur I downloaded the "COMBINE MODS MODEL-1" for CM10 alpha 7.. after I boot it and flash using CWM it only run trough loading screen and it always stuck..
I tried to reflash it using ODIN and used the firmware of my phone afterwards my phone still stuck on Loading screen
Please help me with this
thanks
Click to expand...
Click to collapse
Of course it will still be stuck, you didn't clean the mess in your /system folder. ) You now have 2.3.6 and 4.1 having wild fun over there.
So, I assume, at this point, you have the stock ROM, with the stock recovery. So, what I suggest is that you read the little tutorial below and follow it exactly as it was written.
1. Download CWM for Samsung Galaxy Wonder from here. (It's also available in the development section here.)
2. Flash it via ODIN, by following exactly the same steps as for the ROM flashing.
3. Enter CWM and:
clear data (factory reset)
clear dalvik cache (under "advanced" menu)
go back one step and under "mounts & storage menu -> select "format /system" option. This step is crucial for a clean install!! Especially when changing Android versions.
under the same menu, go ahead and format /sdcard. (Be careful NOT to format /external_sd !)
At this point, you can choose if you want to flash the Samsung stock ROM again via ODIN or flash CM10 again (If you choose to flash CM10, I would suggest the latest version).
Now, if you want to reinstall the stock ROM:
4. exit from there and put your phone into Download Mode again (Home button + Volume DOWN + Power Button).
5. flash the stock ROM via ODIN
If you want to reinstall CM10:
4. go back to the main screen in CWM
5. go to "install zip from sdcard"
6. browse to the location of your CM ROM and flash it
7. flash the correct Gapps for your ROM
8. reboot
That's all. Good luck!
just wanna add one more thing in the end, if u wanna re install cm10 then install the alpha7 version so u can apply the combined mod which will work only on cm10 alpha7
I rooted my AT&T GS3 after 4.3 OTA update with method #2 here http://forum.xda-developers.com/showthread.php?t=2538991
Then I made a TWRP Nandroid backup with Online Nandroid Backup app downloaded from play store. I immediately restored with that backup from TWRP because I would like to verify if the backup process working or not.
The phone did not boot up but stuck in AT&T logo screen for >20 mins. Wiping cache+dalvik didn't help. Factory reset didn't help.
I've already searched the forum. It looks like there is a similar thread there, but not exactly same as mine.
http://forum.xda-developers.com/showthread.php?t=2555120&highlight=nandroid
Is there any way I can get to rooted stock 4.3? If not, what are other options?
Finally I was able to come back with the following steps.
1. Download a "almost official stock rom" from http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18
2. Put the rom in SD card.
3. Boot into TWRP recovery.
4. Wipe->Format Data->Yes
5. Wide->Swipe to Factory Reset
6. Wide->Advanced Wipe->Check Dalvik Cache and Cache->Swipe to Wipe
7. Install->external_sd->AT&T_I747UCEMJB.zip
8. Reboot and enjoy
UPDATE:
Actually this only works for the first boot up. As soon as I boot into OS and reboot, it won't boot in OS anymore. The device was stuck at Samsung Galaxy logo, even not went far to AT&T logo. I guess I'll try another ROM.
JEdad26 said:
Finally I was able to come back with the following steps.
1. Download a "almost official stock rom" from http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18
2. Put the rom in SD card.
3. Boot into TWRP recovery.
4. Wipe->Format Data->Yes
5. Wide->Swipe to Factory Reset
6. Wide->Advanced Wipe->Check Dalvik Cache and Cache->Swipe to Wipe
7. Install->external_sd->AT&T_I747UCEMJB.zip
8. Reboot and enjoy
Click to expand...
Click to collapse
Hi,
Your solution worked for my problem listed here http://forum.xda-developers.com/showthread.php?t=2581349.
Thanks.
JEdad26 said:
Finally I was able to come back with the following steps.
1. Download a "almost official stock rom" from http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18
2. Put the rom in SD card.
3. Boot into TWRP recovery.
4. Wipe->Format Data->Yes
5. Wide->Swipe to Factory Reset
6. Wide->Advanced Wipe->Check Dalvik Cache and Cache->Swipe to Wipe
7. Install->external_sd->AT&T_I747UCEMJB.zip
8. Reboot and enjoy
UPDATE:
Actually this only works for the first boot up. As soon as I boot into OS and reboot, it won't boot in OS anymore. The device was stuck at Samsung Galaxy logo, even not went far to AT&T logo. I guess I'll try another ROM.
Click to expand...
Click to collapse
This link not working for me. I flash with twrp and write... OS no installed.. do u want reboot.?
Hmm..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
androidBH said:
This link not working for me. I flash with twrp and write... OS no installed.. do u want reboot.?
Hmm..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
The link is still working for me, but I wouldn't suggest you trying that because it can boot up only once for me.
I tried all the ROMs posted here http://forum.xda-developers.com/showthread.php?t=2540998
Most of them can boot up into the OS *only once*. As soon as you reboot the device, you'll be stuck in Samsung Galaxy S3 logo. If you wipe data, it'll go further to AT&T logo, but just not the OS home screen.
I ended up with installing SlimBean by following the instruction here
http://forum.xda-developers.com/showthread.php?t=2539313
I really love it because of its performance and it's highly customizable.
UPDATE: Since I followed http://forum.xda-developers.com/showthread.php?t=2539313 to installed the Slimbean, so my TWRP was upgraded from 2.6.3.0 to 2.6.3.1.
With TWRP 2.6.3.1, I was able to flash the "rooted stock rom" posted by loserskater here http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18. The "no-reboot" problem is solved.
Apologize for the simpleton question/layout but it's been awhile since I did this to a rband new tablet and wanted to make sure I have it down right before proceeding.
1. Install Samsung USB drivers
2. Root tab following these instructions: http://forum.xda-developers.com/showthread.php?t=2661198
3. Install CWM follwoing these instructions: http://forum.xda-developers.com/showthread.php?t=2666232
4. Download CM11 ROM and GAPPS from here: http://forum.xda-developers.com/showthread.php?t=2666246
5. Copy CM11 ROM and GAPPS to Msd card
6. Boot into recovery (CWM)
7. Factory reset and Dalvik wipe
8. Install CM11 and GAPPS via CWM
9. Reboot
Did I miss anything?
vexille said:
Apologize for the simpleton question/layout but it's been awhile since I did this to a rband new tablet and wanted to make sure I have it down right before proceeding.
1. Install Samsung USB drivers
2. Root tab following these instructions: http://forum.xda-developers.com/showthread.php?t=2661198
3. Install CWM follwoing these instructions: http://forum.xda-developers.com/showthread.php?t=2666232
4. Download CM11 ROM and GAPPS from here: http://forum.xda-developers.com/showthread.php?t=2666246
5. Copy CM11 ROM and GAPPS to Msd card
6. Boot into recovery (CWM)
7. Factory reset and Dalvik wipe
8. Install CM11 and GAPPS via CWM
9. Reboot
Did I miss anything?
Click to expand...
Click to collapse
Make a backup of your stock ROM after step 6
jmill75 said:
Make a backup of your stock ROM after step 6
Click to expand...
Click to collapse
but be aware that that recovery cannot be cleanly restored at this time.
The custom recovery is still very valuable - for installing CM11, and for getting ADB access to the device in recovery mode.
But a restore will need to be accompanied by a factory reset to get the stock OS to boot again, or an Odin reflash of the stock image. My take on it is that the android_secure files cannot be backed up by CWM as of now.
Anyone planning on flashing a ROM might consider downloading the stock image for their device before they start, IMO.
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Ripshock said:
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Click to expand...
Click to collapse
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Is your device rooted?
Brought to you by SM-T210R
Ripshock said:
Is your device rooted?
Brought to you by SM-T210R
Click to expand...
Click to collapse
yes rooted ,
brajesh0201 said:
yes rooted ,
Click to expand...
Click to collapse
Android-armeabi.universial-root.zip used this package to root
brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
bierma32 said:
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
Click to expand...
Click to collapse
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
brajesh0201 said:
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
Click to expand...
Click to collapse
Im using philz tuoch and i habe no prob.
At philz have check The Mount point (sdcard or sdcard/0 )
If these all not hell flash CWM.
I have no clue what i did with it, but this is on the screen:
Odin Mode
Product name: SM-T210
Current Binary: Custom
System Status: Custon
HW REV: 0x5
It has an image like: Tablet......Yellow triagle with an ! in it.....Computer.
Under that it has the text: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But Kies can't connect to the device. I have no clue what i did all ....
Experts please help !!!
hey
in philz recovery, in wipe options select - clean to install new rom
the goto tab 3 7.0 area get svelte rom , you need to put it on removable microsd with card reader [get one]
the put card back in tab reboot to recovery and flash, firmware updates aren't always good or necessary,
odin should be a last option. stay calm [use the force] and good luck :good:
brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
here is the solution of your prob, i font it in the lt02 Thread
bierma32
Post#352 and following Posts.
http://forum.xda-developers.com/showthread.php?p=53154386
Quote:
Originally Posted by*jstath1972*
In the first attempt i made a dalvik cache, cache, system wiping. I installed the rom and made again a dalvik cache, cache wiping and reboot. Then was saying "no Root. Would you like to flash super user in to system?" and then nothing. I made re install for second time the same rom zip with the default "Factory Reset" and everything went fine. Weird ha ? I also use TWRP 2.7.0.0 .*
I hope to help.*
Its funny its only work when you factory reset, My guess would be that something wrong with twrp or updater script.*
Maybe @gr8nole*will know more bout this issue.*
Sent from my Galaxy Nexus using Tapatalk
brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
try to flash the stock ROM Android 4.1.2 ( Jellybean ) from page www.sammobile.com and flash it with odin 3.07 , after you flash with odin sees the recovery of stock and give ' Wipe Data / Factory Reset ' ' and the problem is solved ( I run my me :good: ) and sorry for my bad English that use a translator :silly:
( and the solution suddenly discovered )
I just hope it works for you you too
Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.
nicobee75 said:
Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.
Click to expand...
Click to collapse
Hi
It seems you were on kitkat rom which may have updated your bootloader to kitkat version. The CWM needs to be updated to work well with kitkat. I had similar problem with my SM-T210, and solved the problem after updating CWM as per this post for T210:
http://forum.xda-developers.com/showthread.php?t=2433853
Your tab is different from mine so i think you need a fresh stock rom install using odin, then find an updated CWM for your tab.