It's odd, but I've seen many unboxings, and most of the time on the boot up, the Motorolla M has clock gears in the M.. now I'm starting to
notice a different boot animation.. I've only seen it once on youtube and then the watch I own myself. Instead of the clock gears, it's an M in the middle with a white light circling the minute markers.. what's the difference? Why are there 2 different boot screens?
thanks, hope this hasn't been mentioned
It's due to the firmware it's running at the time. Most unboxings are showing it turn on for the very first time and the original firmware (4.4W ) had the gear boot animation. But immediately upon turning it on the device prompts you to charge the battery and update. The update puts you on 4.4W.1 which has the new boot animation. So essentially most people only ever see the old boot animation once
I wish they wouldn't have changed it. The gears are way cooler than the clock boot ani.
notsointeresting said:
It's due to the firmware it's running at the time. Most unboxings are showing it turn on for the very first time and the original firmware (4.4W ) had the gear boot animation. But immediately upon turning it on the device prompts you to charge the battery and update. The update puts you on 4.4W.1 which has the new boot animation. So essentially most people only ever see the old boot animation once
Click to expand...
Click to collapse
I think the boot animation with the gears in the M is for initial start-up. I had 4.4W.1 already pre-installed when I got my M360. That boot animation only showed once.
neilrl79 said:
I wish they wouldn't have changed it. The gears are way cooler than the clock boot ani.
Click to expand...
Click to collapse
Just remember it, and when the developers start to take off let them know the boot animation on 4.4W was pretty sick, they might be able to extract it for a custom rom
Related
I saw this boot animation on a ROM. I think maybe the deoxed version of Froyo. The androids pop on the screen and wave hi. The middle says EVO 4G. The only part I didn't like was the "DROID" startup sound at the end.
Anyone know where I can find that bootup?
When you turn on your phone and you get to your homescreen after turning it on, it loads for a minute with a white picture with "HTC" there, how can i change that? is that a splash or something?
Rocklee99 said:
When you turn on your phone and you get to your homescreen after turning it on, it loads for a minute with a white picture with "HTC" there, how can i change that? is that a splash or something?
Click to expand...
Click to collapse
That is indeed a splash screen! You can find quite a few of them here
http://forum.xda-developers.com/showthread.php?t=708173
Adam1422 said:
That is indeed a splash screen! You can find quite a few of them here
http://forum.xda-developers.com/showthread.php?t=708173
Click to expand...
Click to collapse
also, what is the screen called when i boot up the phone and it says "htc evo 4g" in white?
Rocklee99 said:
also, what is the screen called when i boot up the phone and it says "htc evo 4g" in white?
Click to expand...
Click to collapse
When you first boot up, and see the white screen that says "htc EVO 4g", THAT is the splash screen, it is shown before the boot animation plays. You can find a bunch of different splash screens in the themes and apps section. As far as the other screen you mentioned, where after the phone actually boots into the rom, it will show a different HTC screen for a second or two while it loads the homescreen? Is that the one you mean? If so, I actually have no idea what it's called. Whatever it is, I know it can be modified, because I run Myn's rom, and with that rom, it shows "Myns warm two point two" in the bottom corner.
Rocklee99 said:
When you turn on your phone and you get to your homescreen after turning it on, it loads for a minute with a white picture with "HTC" there, how can i change that? is that a splash or something?
Click to expand...
Click to collapse
it is home_screen.9.png in the rosie.apk to get the rosie apk use root explorer or ES file manager navigate to system/app and pull out the rosie.apk. then you can use 7zip to replace the image. Or you can use ninjamorph off the market open. place the image you want on to your sdcard must be 480x800 ninjamorph start new project and navigate to same location now in ninjamorph go to res/drawable-hdpi and find home_screen.9.png clicj on it. now find the image you want and press it. Go back to the ninjamorph home and click fish project press ok then reboot after finished. You will most likely have to put your widgets back on the screen after reboot
I just rootet my phone with Oxygen and my splash screen annoys me. It show is the "Unsecure Kernel" splash screen.
Are there any places where there are some cool splash screens to the Galaxy S2 and perhaps a relatively easy way to install them?
Nesrail said:
I just rootet my phone with Oxygen and my splash screen annoys me. It show is the "Unsecure Kernel" splash screen.
Are there any places where there are some cool splash screens to the Galaxy S2 and perhaps a relatively easy way to install them?
Click to expand...
Click to collapse
use a USB Jig..
http://forum.xda-developers.com/showthread.php?t=1495867
What exactly is USB JIG?
Via search
http://forum.xda-developers.com/showthread.php?t=1402286
jje
Not really what I was thinking about.
There are two kind of splash screens when booting.
Firt the unanimated screen followed by an animation screen.
On a rooted SGS2 you can change both screens using market apps BUT your kernel also must support it.
To change the still splash screen i use "SGS2 Bootscreen Changer" by Hellcat.
To change the boot animation i use "ROM Toolbox" by Jared Rummler (JRummy16) (Interface -> Bootanimation).
Hope i could help and greetings!
which splash screen are you talking about? If your talking about the "Samsung Galaxy S II" one with the yellow triangle then you need the usb jig to get rid of the triangle, once you have gotten rid of the triangle you can then you can change that first screen with the above mentioned app (sgs2 bootscreen changer). If its the animation one you want to change however, that's simple enough. there are heaps of forums giving you step by step instructions with new ones to download. You just need a root explorer, i like ES File Exporer
I am making my first boot animation, but the the animation takes about 1-3 seconds longer than my phone's typical boot time. As a result, when starting up, my phone cuts the end of the animation off. Is there any way to make android play the entire boot animation before booting up? Thank you.
I read that if you have another launcher installed and don't select a default launcher your boot ani should run a little longer. Like TW launcher and Go launcher for example.
Sent from my SPH-D710 using xda app-developers app
Hey guys I was wondering if anyone would be up for making the new Google logo boot animation for our screens,
Also was hoping for it to be landscape instead of portrait, as its for a car install.
Thanks everyone!!!
I wanna do that too
Maybe it's possible but is complicate and no one is going to make it true or real (For some reason). I also wanna put the new Google logo in my nexus 2013 wifi.