Related
i dont know if it just with me
my hox become very hot when i use it to serf the net or whatsapp and instagram
even when i change the rom ARHD its still the same
my DHD was great and never heat up
any slice use the phone start to boil and yellow spots come out on the screen
need help
mmh5 said:
i dont know if it just with me
my hox become very hot when i use it to serf the net or whatsapp and instagram
even when i change the rom ARHD its still the same
my DHD was great and never heat up
any slice use the phone start to boil and yellow spots come out on the screen
need help
Click to expand...
Click to collapse
i got the same problem, but with some more usage. I still use my DHD and I think its better than this oven.
omg
this problem need to be solved
i can use it like this
my DHD was much more better
if any one see this please help SOS
What rom are you using... what kernel etc..
On maximus with stock kernel I barely get heat...
Based on the VERY DETAILLED information in your comment
I can only recomend you install a CPU FAN and hardwire it to
the battery...
mmh5 said:
i dont know if it just with me
my hox become very hot when i use it to serf the net or whatsapp and instagram
even when i change the rom ARHD its still the same
my DHD was great and never heat up
any slice use the phone start to boil and yellow spots come out on the screen
need help
Click to expand...
Click to collapse
Your comparing a DHD to a One X.... It's a quad core device *facepalm*...
So before you give up and call the One X a terrible phone (like the 500 rants this forum has) . We need much more information about your device.
1. Have you unlocked the bootloader?
2. Are you running a custom rom/kernel?
3. What base are you on?
4. How long have you had this phone? And how long have you had this problem?
Sent from the best HTC One X in the universe...
mmh5 said:
i dont know if it just with me
my hox become very hot when i use it to serf the net or whatsapp and instagram
even when i change the rom ARHD its still the same
my DHD was great and never heat up
any slice use the phone start to boil and yellow spots come out on the screen
need help
Click to expand...
Click to collapse
Tw1tchy said:
Your comparing a DHD to a One X.... It's a quad core device *facepalm*...
So before you give up and call the One X a terrible phone (like the 500 rants this forum has) . We need much more information about your device.
1. Have you unlocked the bootloader?
2. Are you running a custom rom/kernel?
3. What base are you on?
4. How long have you had this phone? And how long have you had this problem?
Sent from the best HTC One X in the universe...
Click to expand...
Click to collapse
Have you actually read his post? The one you are quoting?
1. As he has ARHD, yes he has
2. Yes he did ARHD
3. Lets say ARHD just for the fun
4. Irrelevant?
If the screen becomes yellow due to the heat, I would say this is hw problem as he tested different roms. UV might help, but the device should not become like this.
What I would be interested in, if he is not using it in direct sunlight on a beach with 40 degrees in the shadow. Even though I saw ppl say their devices survived that.
I am now in Egypt myself and even at night. With -125 UV. And the device still gets hot, red/green blinking on charge.
BUT I never got yellow spots coming out of the screen. And just cuz of that I would says something is wrong on hw level there.
P00r said:
What rom are you using... what kernel etc..
On maximus with stock kernel I barely get heat...
Based on the VERY DETAILLED information in your comment
I can only recomend you install a CPU FAN and hardwire it to
the battery...
Click to expand...
Click to collapse
i flashed rom maximus but without the stock kernal and the temp still the same
im goning to try it now with the stock
mmh5 said:
i flashed rom maximus but without the stock kernal and the temp still the same
im goning to try it now with the stock
Click to expand...
Click to collapse
try faux kernel and undervolt it and underclock it using system tuner or setcpu that will solve all your heat issues
I have exactly the same problem. Whenever i use my One X for navigation in the car (using Navigon) the battery drains more than the Kidigi Car Holder can charge. I already checked all advices that there are like:
- Kidigi Car Holder is charging with AC
- disabled 2 Cores
- UV all frequencies by -125mV
- running the phone in airplane mode
- disabling autobrightness
At the moment i´m running ARHD 9.3.2 with Faux 007m Kernel.
Could someone please help?
PAGOT said:
Have you actually read his post? The one you are quoting?
1. As he has ARHD, yes he has
2. Yes he did ARHD
3. Lets say ARHD just for the fun
4. Irrelevant?
If the screen becomes yellow due to the heat, I would say this is hw problem as he tested different roms. UV might help, but the device should not become like this.
What I would be interested in, if he is not using it in direct sunlight on a beach with 40 degrees in the shadow. Even though I saw ppl say their devices survived that.
I am now in Egypt myself and even at night. With -125 UV. And the device still gets hot, red/green blinking on charge.
BUT I never got yellow spots coming out of the screen. And just cuz of that I would says something is wrong on hw level there.
Click to expand...
Click to collapse
PAGOT said:
Have you actually read his post? The one you are quoting?
1. As he has ARHD, yes he has
2. Yes he did ARHD
3. Lets say ARHD just for the fun
4. Irrelevant?
If the screen becomes yellow due to the heat, I would say this is hw problem as he tested different roms. UV might help, but the device should not become like this.
What I would be interested in, if he is not using it in direct sunlight on a beach with 40 degrees in the shadow. Even though I saw ppl say their devices survived that.
I am now in Egypt myself and even at night. With -125 UV. And the device still gets hot, red/green blinking on charge.
BUT I never got yellow spots coming out of the screen. And just cuz of that I would says something is wrong on hw level there.
Click to expand...
Click to collapse
im not expert in these stuff i barely know how to flash a rom
i downloaded some roms and im going to try them
if there any app will help even if the phone performance will decrease i will use it
mmh5 said:
im not expert in these stuff i barely know how to flash a rom
i downloaded some roms and im going to try them
if there any app will help even if the phone performance will decrease i will use it
Click to expand...
Click to collapse
If it's happening on 2 roms other ones won't help you.
For sure not customized sense ones.
You could compare sense vs cyanogenmod.
But still, the CPU is kernel controlled.
And remember always when you download a Rom it takes like a day to settle, syncing set ups and etc. So to test a Rom you need few days.
Just stick to a Rom for now. And try the advices we already gave you. Undervolting with lets say faux kernel etc.
Sent from my HTC One X using Tapatalk 2
vivek_bhoj said:
try faux kernel and undervolt it and underclock it using system tuner or setcpu that will solve all your heat issues
Click to expand...
Click to collapse
im going to flash the faux kernal now
kindly if you can give the values that i must set
OK... So far so good
I flash ARHD and the faux kernel
I also installed system tuner
In system tuner there is many settings & I don't know what to change
Sent from my HTC One X using xda
PAGOT said:
If it's happening on 2 roms other ones won't help you.
For sure not customized sense ones.
You could compare sense vs cyanogenmod.
But still, the CPU is kernel controlled.
And remember always when you download a Rom it takes like a day to settle, syncing set ups and etc. So to test a Rom you need few days.
Just stick to a Rom for now. And try the advices we already gave you. Undervolting with lets say faux kernel etc.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
What to value I change???
Sent from my HTC One X using xda
Install Hidden settings app from play store and in the newly created Power saver settings in the app drawer, disable "Reduce CPU cores" or something like this,(its the second option on the list, thats for sure )because basically your HOX runs on 1 core with 1 Ghz, but if you turn this power saver setting off, you will have a full 4 core perfomance, as it should be. This has solved me the heating problem a long time ago when i SEARCHED THIS FORUM, which option i gladly reccomend now to you!!!
Sent from my HTC One X using Tapatalk 2
TripleD_HOX said:
Install Hidden settings app from play store and in the newly created Power saver settings in the app drawer, disable "Reduce CPU cores" or something like this,(its the second option on the list, thats for sure )because basically your HOX runs on 1 core with 1 Ghz, but if you turn this power saver setting off, you will have a full 4 core perfomance, as it should be. This has solved me the heating problem a long time ago when i SEARCHED THIS FORUM, which option i gladly reccomend now to you!!!
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
usually when i open instagram or whatsapp it start heating
but now after 3 videos on youtube and texting still 32-34 C
before its reach 44c
im going to test this way tonight and will tell you any updates :fingers-crossed:
thanks a lot
I have this problem too, i have try this app but still overheating....
Sent from my HTC One X using xda premium
with faux kernal and hidden setting my hox doesn't heat up like before
only once heat up when i force close some apps
but still much better the before :good:
i still want the value that i must change in system tuner
also i notice in system tuner the CPU didn't change at all
waiting for the values
try other roms
Before I face the same problem but after I change the ROM to rd miui, I think the heat still natural for me..
My advice try rd miui for ICS or jelly bean and try cm10 from trip droid ROM with new kernel 3.1.10 for jelly bean.
Now I am still try using trip droid ROM..so far so good about the heat..
Best regards
Ronny tri
mmh5 said:
with faux kernal and hidden setting my hox doesn't heat up like before
only once heat up when i force close some apps
but still much better the before :good:
i still want the value that i must change in system tuner
also i notice in system tuner the CPU didn't change at all
waiting for the values
Click to expand...
Click to collapse
Im glad i could help. In system tuner at the voltages tap ONLY 2 Times the "-25mV" icon, and at the cpu, set the governor to interactive. I guarantee your HOX will freeze your hands while you're holdin It
Tapatalk 2-vel küldve az én HTC One X-ről
My N2 makes me crazy when it gets warm.
When it reaches about 36 celsius degrees it starts with frequency limit of 800MHz.
The second step is making 2 cores offline and at last my gadget becomes limited to 2 cores at a max. of 500MHz.
It becomes almost unusable for me when in car. I use two navis in multiwindow (Waze and Sygic) and AutoGuard recording in background with FullHD and in about 5 minutes it's restricted hardly.
I know it's for safety reasons but I think it's too strict.
Is there a possibility to raise the thresholds of these by a few degrees?
What kernels support this?
There is a nice app called Android Tuner which is able to set these tresholds but it is for Qualcomm CPU-s only...
Thanks for any answers in advance!
le_vente said:
My N2 makes me crazy when it gets warm.
When it reaches about 36 celsius degrees it starts with frequency limit of 800MHz.
The second step is making 2 cores offline and at last my gadget becomes limited to 2 cores at a max. of 500MHz.
It becomes almost unusable for me when in car. I use two navis in multiwindow (Waze and Sygic) and AutoGuard recording in background with FullHD and in about 5 minutes it's restricted hardly.
I know it's for safety reasons but I think it's too strict.
Is there a possibility to raise the thresholds of these by a few degrees?
What kernels support this?
There is a nice app called Android Tuner which is able to set these tresholds but it is for Qualcomm CPU-s only...
Thanks for any answers in advance!
Click to expand...
Click to collapse
You can change a value in a file under system, but it is not so safe..
Mate996 said:
You can change a value in a file under system, but it is not so safe..
Click to expand...
Click to collapse
Very helpful...
Sent from my GT-N7100 using XDA Premium 4 mobile app
Mate996 said:
You can change a value in a file under system, but it is not so safe..
Click to expand...
Click to collapse
Not exactly understand...
There must be a safe setting for it as with Perseus kernel the thresholds are higher, but not too much. I forgot to edit my question according my experiences with Perseus.
At least with Perseus I get a max of 1000MHz at most cases but it is not enough for me cause I use apps needing high resources.
Would You be so kind to write about the value to be changed in order to get higher thresholds?
If I understand you correctly. Then you could try trickster mod.
Or try saber kernel. I use this baked into the Jedi rom.
Sent from my GT-N7105 using xda app-developers app
3vo3d said:
If I understand you correctly. Then you could try trickster mod.
Or try saber kernel. I use this baked into the Jedi rom.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Thank You for the advice!
Now I had some time so I'm on Saber kernel and just testing.
The testing is awesome till now: the phone is working more powerful with this kernel and doesn't get hot so soon. :good:
Oh, now there is something strange, the programs get FC-s...
The phone is on charger, I ran AutoGuard in the background in FullHD, Sygic and Waze in MultiWindow, VideoPlayer in popup with a FullHD video and SuperPlayer in popup with another FullHD video. It was extremely fine but after a few minutes the players collapsed and AutoGuard had an error. The system is stable anyway. It seems I have to restart phone now...
Edit: After restart I got an old problem back: Dropbox is unable to run again... I loved Perseus because of this, on Perseus this problem was away... I hope that I won't get the other issue back with my WiFi... And it seems, AutoGuard became stupid too... :crying:
I don't give up and keep on trying to make them ok.
But I can't find the thermal control feature in Trickster Mod Donation altough I have just a minute for it.
I am reading Trickster webpage to get ahead...
Question: Are You using Jedi ROM and have no thermal problems?
In that case I'm going to try that ROM, cause I'm on hunting for a ROM that works with no problems for me.
I tried some lately and till now Omega v18 was the best amongst them. I tried MIUI, ProBam, Hawkish in the last days and I get problems with all of them or had non-working applications and/or features which ones are essentials for me...
Edit: mmmmmmmm, as see there is no Jedi ROM for international N7100...
hey bro,
wow you seem to be a bit more advanced than me so maybe ive reached the limit of the advice i can give you.
However, if you inform me how to check for thermal problems i will surely do that and then report back.
the saber kernel to the best of my knowledge is underclocked so if you try to o/c it maybe that will prevent your fc's. I have read in the various threads, of which the community is very helpful, of some issues for heavy users due to the u/c.
Regarding the jedi rom i am a uk 7105 user and to the best of my knowledge i thought it would also work for international 7100 users?!?!
Here is the thread i use.
http://forum.xda-developers.com/showthread.php?t=1987634
reading the op of that thread it would appear you are correct. I do know they are working on version 18 so maybe that will work for you. fingers crossed.
3vo3d said:
hey bro,
wow you seem to be a bit more advanced than me so maybe ive reached the limit of the advice i can give you.
However, if you inform me how to check for thermal problems i will surely do that and then report back.
the saber kernel to the best of my knowledge is underclocked so if you try to o/c it maybe that will prevent your fc's. I have read in the various threads, of which the community is very helpful, of some issues for heavy users due to the u/c.
Regarding the jedi rom i am a uk 7105 user and to the best of my knowledge i thought it would also work for international 7100 users?!?!
Here is the thread i use.
http://forum.xda-developers.com/showthread.php?t=1987634
reading the op of that thread it would appear you are correct. I do know they are working on version 18 so maybe that will work for you. fingers crossed.
Click to expand...
Click to collapse
Thank You for Your effort!
I'll keep on investigating for a solution.
Unfortunately the real test was horrible with Saber kernel, when I tested it in car the temperature got high soon and the thersholds were low again.
But it's a good idea to try o/c thank You very much!
I'll try it tomorrow, now I have to go to play Cod4... :laugh:
And I found that TWRP is recommended for Saber and a few minutes untouching after the restart so I'll try again.
Have a nice day!
you too bro, sorry i couldnt help more.
but if you post in the saber kernel thread there are some helpful and intelligent folks in there that may have a better solution for you.
enjoy cod
3vo3d said:
you too bro, sorry i couldnt help more.
but if you post in the saber kernel thread there are some helpful and intelligent folks in there that may have a better solution for you.
enjoy cod
Click to expand...
Click to collapse
Thank You again!
I got some experiences with the newest Saber kernel and I like it 'cause the first kernel I can use 100MHz step with and using 300MHz step too.
It seemes to be good at battery consumption too. My only problem that this kernel doesn't support STweaks so I can't regulate charging voltages like I used to. Perhaps only Perseus kernel makes it possible as I can't get any other programs for it till now. Or NEAK kernel and the new versions of AGNi pureSTOCK kernel as I read their pages. I'll try them some day. But Perseus is my favourite.
I think it's important to say that the kernel isn't UC/OC by default so this doesn't make any problems and it's not UV-ed too.
I set min. to 100MHz and max. to 1920MHz to test and it's stable till now. I tried to Overvolt slightly and had no change on media programs behavior they don't like each other as I see.
Trickster Mod is nice 'cause it shows the CPU temperature which was helpful to understand this regulations of thermal control are needed.
When I tested it turned out that CPU is below 70 degrees while the battery temparuture is 'only' about 40 degrees.
So thanks for Your kind advises!
wow. Ok i think i understood most of your post. probably a little bit over my head but i need to learn.
I really like the new kernel im getting 1% battery drain an hour with the screen off which truly is unheard of for me,
The kernel runs real smooth apart from when i play asphalt 8. Or i should say it runs smooth playing the game until the phone tries to do something else. For example if it attempts to update a programme or if a message/email comes through. then the game just lags and i have to wait for the phone to stop multi tasking before the car starts to move normally again.
So im surprised to read you say the kernel isn't uc/uv by default??? I was pretty positive it was. But i dont know for sure and im probably not clever enough to figure it out lol.
I wonder what settings i would need to increase to aid the phone in its multi tasking? Also there must be some kind of programme we could use that would test our specific phone/cpu and tell us which settings it would prefer. As i believe each phone will run slightly different?
You are right i remember reading the kernel does not work with stweaks.
I wish i could work with you and figure out how to optimise our settings but i simply dont have the skill set.
I presume you used trickster to overvolt slightly?
3vo3d said:
wow. Ok i think i understood most of your post. probably a little bit over my head but i need to learn.
I really like the new kernel im getting 1% battery drain an hour with the screen off which truly is unheard of for me,
The kernel runs real smooth apart from when i play asphalt 8. Or i should say it runs smooth playing the game until the phone tries to do something else. For example if it attempts to update a programme or if a message/email comes through. then the game just lags and i have to wait for the phone to stop multi tasking before the car starts to move normally again.
So im surprised to read you say the kernel isn't uc/uv by default??? I was pretty positive it was. But i dont know for sure and im probably not clever enough to figure it out lol.
I wonder what settings i would need to increase to aid the phone in its multi tasking? Also there must be some kind of programme we could use that would test our specific phone/cpu and tell us which settings it would prefer. As i believe each phone will run slightly different?
You are right i remember reading the kernel does not work with stweaks.
I wish i could work with you and figure out how to optimise our settings but i simply dont have the skill set.
I presume you used trickster to overvolt slightly?
Click to expand...
Click to collapse
No, I didn't overvolt at last. But once I tried and didn't helped on my problems.
Unfortunately now I'm back on Perseus kernel again 'cause some issues with Saber. It became crazy every time and locked my CPU on 160MHz only and only reboot helped.
The other issue was the stuck system server process what was active all night and didn't stop hard work.
Now I'm on reading the kernel's page till I get cleverer on it... then I perhaps try it again 'cause I liked it.
http://forum.xda-developers.com/showthread.php?t=2260397&page=5
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Add the Gs4 as well
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Seraz007 said:
Add the Gs4 as well
Click to expand...
Click to collapse
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
beekay201 said:
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
Click to expand...
Click to collapse
I'ts not problem about OC , even if i set to 1,2ghz there are no changes , i just dont know what could be the problem , cuz the game runs smooth on other phone which is not good as this one , thats weird , im not controlling voltages , i didn't touch anything.
samersh72 said:
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
Click to expand...
Click to collapse
No , it didnt help. I already tried it before , but when i Force 4x MSAA it just makes game more lagy , maybe cuz of game , anyway i gave an example Temple Run 2 , but even other 3D games are laging , why shouldnt I OC to 1.6 , could brick phone or ?
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
beekay201 said:
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
Click to expand...
Click to collapse
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
wizox said:
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
Click to expand...
Click to collapse
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
beekay201 said:
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
Click to expand...
Click to collapse
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
wizox said:
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
Click to expand...
Click to collapse
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
wizox said:
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
Click to expand...
Click to collapse
Do you even know anything about ROMs and kernels?
When I said have you tested this on stock kernel, I meant, did you try this on stock ROM, but specified kernel because, it's like, common knowledge for someone who flashes ROMs, that custom ROMs devs often alter kernel (and ramdisk) to support features on their custom roms..
Have you for example tried reflashing PA, and just PA, nothing else? Does it lag then?
Have you for example tried fully reverting back to stock? (factory images)
Why is it that you just want your games not to lag, not even trying to gain a deeper understanding about what people are telling you.
Listen, this is the last time I'm saying this:
I told you to check your voltages, since you're OC'ing, and expecting SR to do the job for you.
Test by reflashing again PA, with no custom kernel.
Test by going back to stock, through fastboot/factory images.
Temple Run 2 on best quality lags in mine too.Probably it was designed for 1080p.Just keep the graphics a little lower, doesn't affect gameplay or quality
Sent from my maguro
This is the topic at hand .... not that after a period of use the lg nitro hd p930 is heated in an incredible
way and this caused the system is damaged and the wifi did not work because of this I had to unbrick the phone to
install them other rom that doing ics hard reset on stock 4.0.4 att ... but I just realized I still doing the same in other
rom and you do not and I hope that someone knows about this and can give me an answer.
Note: this step after aver played Turbo Racing League now all I installed rom without playing is heated and the wifi is
going to turn off and remove and replace the battery
excuse my bad English use google translator
Try to change frequency. Standart is about 1500mhz and you should decrease it to 1200 or less. Use set cpu or cpu master (free in google play).
Sent from my LG-P930 using xda premium
No Frills CPU is also free and available from the Play store. I use SmartassV2 and Deadline in the cpu settings.
6783 said:
Try to change frequency. Standart is about 1500mhz and you should decrease it to 1200 or less. Use set cpu or cpu master (free in google play).
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
audit13 said:
No Frills CPU is also free and available from the Play store. I use SmartassV2 and Deadline in the cpu settings.
Click to expand...
Click to collapse
thanks for the info ... I cofigurado yesterday with the minimum frequency to 460Mhz and 1000Mhz the Maxima using the SetCPU program ... My concern is that if this resolves the wifi is not active due to heating after that I have to wait for the restart and pull the battery to get it working again ..
If you have further information about the settings they are appreciate ... I'm using the Rom Avatar
You could try installing an ICS rom to see if wifi works. If it does, then you know it's the current rom that is causing the problem.
I have tried a few roms and never had the heating or wifi issue.
not that the wifi does not work is that when heated or I'm using and gives the restart issue is not working anymore for some time
Not sure but maybe there is something wrong with your phone or the battery. Does the battery heat up when connected to a charger and sitting ilde? Does it heat up just sitting idle and not connected to a charger?
This is happening with regularities in these devices and as I see on forum ... is when I'm using a heavy application at first but after was more consistent than using normal applications gives Random restart
I think I read one or two posts from people that had hot batteries but that was due to the person using a custom rom.
I started using my P930 after not using it for many months because I was using a different phone. I loaded CM10 because it seems to give me the best battery life so far. I'll know more when I start using the phone more regularly.
audit13 said:
I think I read one or two posts from people that had hot batteries but that was due to the person using a custom rom.
I started using my P930 after not using it for many months because I was using a different phone. I loaded CM10 because it seems to give me the best battery life so far. I'll know more when I start using the phone more regularly.
Click to expand...
Click to collapse
In my reason I have determined that the problem seems to be hardware that is not heating the battery but processors am using Avatar Rom Android version 4.2.2 based on CM10 ...using wind kerner 2.5...And as I have read it is the cpu frequencies...download an app to adjust the frequencies at the same level...commented after what results
I have a S4 mini running custom carbon kk unofficial 4.4.3 as it comes with the settings to set CPU's and governors but the phone keeps changing the min to around 1400 but the max stays at 1700.i don't notice until my battery is draining really fast or gets hot. anyone kno a fix to this?
matizkool said:
I have a S4 mini running custom carbon kk unofficial 4.4.3 as it comes with the settings to set CPU's and governors but the phone keeps changing the min to around 1400 but the max stays at 1700.i don't notice until my battery is draining really fast or gets hot. anyone kno a fix to this?
Click to expand...
Click to collapse
Which governor is it using to set a min of 1400? Ever likely it gets hot and eats power! I use f4k's kernel, and the 'Performance Control' app to look at and alter stuff - you don't say what you use or have tried.
There is a Carbon 4.4.4 available with f4ktion 1.5 kernel - might be an idea to flash that and the problem might go away!
xbin said:
Which governor is it using to set a min of 1400? Ever likely it gets hot and eats power! I use f4k's kernel, and the 'Performance Control' app to look at and alter stuff - you don't say what you use or have tried.
There is a Carbon 4.4.4 available with f4ktion 1.5 kernel - might be an idea to flash that and the problem might go away!
Click to expand...
Click to collapse
It's on every governor this happens but I use Wheatley. I would manually set it to around the 300s but in a couple of hours it would auto set at 1400 on its on. This causes my battery to drain my kernel version is 3.4.91 f4ktion 1.4.5 eur lte
matizkool said:
It's on every governor this happens but I use Wheatley. I would manually set it to around the 300s but in a couple of hours it would auto set at 1400 on its on. This causes my battery to drain
Click to expand...
Click to collapse
Strangely enough I've settled with Wheatley too! but it spends most of its time at 162 when not in deep sleep (a bit like me!). This really needs posting in the Carbon thread so I would post a few more things here to help or comment on stuff to get to 10 posts and then ask in there. I can't think what could be causing that behaviour, if it was me it would be bye bye 4.4.3 and hello 4.4.4
xbin said:
Strangely enough I've settled with Wheatley too! but it spends most of its time at 162 when not in deep sleep (a bit like me!). This really needs posting in the Carbon thread so I would post a few more things here to help or comment on stuff to get to 10 posts and then ask in there. I can't think what could be causing that behaviour, if it was me it would be bye bye 4.4.3 and hello 4.4.4
Click to expand...
Click to collapse
Yeah i flashed to 4.4.4 thanks though
Never mind above still happens even though I flashed 4.4.4
matizkool said:
Never mind above still happens even though I flashed 4.4.4
Click to expand...
Click to collapse
Does the actual minimum change rather than it simply running continually at 1400+ and if so which governor does it change to if any!
I read somewhere in the Carbon thread someone was having similar problems so they flashed the kernel twice, one directly after the other; seems something wasn't getting written correctly the first time but was the second, and the problem went away. Worth a go...
xbin said:
Does the actual minimum change rather than it simply running continually at 1400+ and if so which governor does it change to if any!
I read somewhere in the Carbon thread someone was having similar problems so they flashed the kernel twice, one directly after the other; seems something wasn't getting written correctly the first time but was the second, and the problem went away. Worth a go...
Click to expand...
Click to collapse
I found this : Q: CPU/GPU frequency doesn't stick?
A: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel feature that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues.
Is this a fix?
matizkool said:
I found this : Q: CPU/GPU frequency doesn't stick?
A: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel feature that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues.
Is this a fix?
Click to expand...
Click to collapse
It could help. Trickster is good. However, this suggests that there is something else causing or forcing the frequency setting to be changed. The question is what? and I've no idea:crying:
Haha I found the problem it was either this battery saver app or I changed to scheduler to anything besides row
matizkool said:
Haha I found the problem it was either this battery saver app or I changed to scheduler to anything besides row
Click to expand...
Click to collapse
Thats good. It was probably the battery saver because they usually do the opposite!