My N2 makes me crazy when it gets warm.
When it reaches about 36 celsius degrees it starts with frequency limit of 800MHz.
The second step is making 2 cores offline and at last my gadget becomes limited to 2 cores at a max. of 500MHz.
It becomes almost unusable for me when in car. I use two navis in multiwindow (Waze and Sygic) and AutoGuard recording in background with FullHD and in about 5 minutes it's restricted hardly.
I know it's for safety reasons but I think it's too strict.
Is there a possibility to raise the thresholds of these by a few degrees?
What kernels support this?
There is a nice app called Android Tuner which is able to set these tresholds but it is for Qualcomm CPU-s only...
Thanks for any answers in advance!
le_vente said:
My N2 makes me crazy when it gets warm.
When it reaches about 36 celsius degrees it starts with frequency limit of 800MHz.
The second step is making 2 cores offline and at last my gadget becomes limited to 2 cores at a max. of 500MHz.
It becomes almost unusable for me when in car. I use two navis in multiwindow (Waze and Sygic) and AutoGuard recording in background with FullHD and in about 5 minutes it's restricted hardly.
I know it's for safety reasons but I think it's too strict.
Is there a possibility to raise the thresholds of these by a few degrees?
What kernels support this?
There is a nice app called Android Tuner which is able to set these tresholds but it is for Qualcomm CPU-s only...
Thanks for any answers in advance!
Click to expand...
Click to collapse
You can change a value in a file under system, but it is not so safe..
Mate996 said:
You can change a value in a file under system, but it is not so safe..
Click to expand...
Click to collapse
Very helpful...
Sent from my GT-N7100 using XDA Premium 4 mobile app
Mate996 said:
You can change a value in a file under system, but it is not so safe..
Click to expand...
Click to collapse
Not exactly understand...
There must be a safe setting for it as with Perseus kernel the thresholds are higher, but not too much. I forgot to edit my question according my experiences with Perseus.
At least with Perseus I get a max of 1000MHz at most cases but it is not enough for me cause I use apps needing high resources.
Would You be so kind to write about the value to be changed in order to get higher thresholds?
If I understand you correctly. Then you could try trickster mod.
Or try saber kernel. I use this baked into the Jedi rom.
Sent from my GT-N7105 using xda app-developers app
3vo3d said:
If I understand you correctly. Then you could try trickster mod.
Or try saber kernel. I use this baked into the Jedi rom.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Thank You for the advice!
Now I had some time so I'm on Saber kernel and just testing.
The testing is awesome till now: the phone is working more powerful with this kernel and doesn't get hot so soon. :good:
Oh, now there is something strange, the programs get FC-s...
The phone is on charger, I ran AutoGuard in the background in FullHD, Sygic and Waze in MultiWindow, VideoPlayer in popup with a FullHD video and SuperPlayer in popup with another FullHD video. It was extremely fine but after a few minutes the players collapsed and AutoGuard had an error. The system is stable anyway. It seems I have to restart phone now...
Edit: After restart I got an old problem back: Dropbox is unable to run again... I loved Perseus because of this, on Perseus this problem was away... I hope that I won't get the other issue back with my WiFi... And it seems, AutoGuard became stupid too... :crying:
I don't give up and keep on trying to make them ok.
But I can't find the thermal control feature in Trickster Mod Donation altough I have just a minute for it.
I am reading Trickster webpage to get ahead...
Question: Are You using Jedi ROM and have no thermal problems?
In that case I'm going to try that ROM, cause I'm on hunting for a ROM that works with no problems for me.
I tried some lately and till now Omega v18 was the best amongst them. I tried MIUI, ProBam, Hawkish in the last days and I get problems with all of them or had non-working applications and/or features which ones are essentials for me...
Edit: mmmmmmmm, as see there is no Jedi ROM for international N7100...
hey bro,
wow you seem to be a bit more advanced than me so maybe ive reached the limit of the advice i can give you.
However, if you inform me how to check for thermal problems i will surely do that and then report back.
the saber kernel to the best of my knowledge is underclocked so if you try to o/c it maybe that will prevent your fc's. I have read in the various threads, of which the community is very helpful, of some issues for heavy users due to the u/c.
Regarding the jedi rom i am a uk 7105 user and to the best of my knowledge i thought it would also work for international 7100 users?!?!
Here is the thread i use.
http://forum.xda-developers.com/showthread.php?t=1987634
reading the op of that thread it would appear you are correct. I do know they are working on version 18 so maybe that will work for you. fingers crossed.
3vo3d said:
hey bro,
wow you seem to be a bit more advanced than me so maybe ive reached the limit of the advice i can give you.
However, if you inform me how to check for thermal problems i will surely do that and then report back.
the saber kernel to the best of my knowledge is underclocked so if you try to o/c it maybe that will prevent your fc's. I have read in the various threads, of which the community is very helpful, of some issues for heavy users due to the u/c.
Regarding the jedi rom i am a uk 7105 user and to the best of my knowledge i thought it would also work for international 7100 users?!?!
Here is the thread i use.
http://forum.xda-developers.com/showthread.php?t=1987634
reading the op of that thread it would appear you are correct. I do know they are working on version 18 so maybe that will work for you. fingers crossed.
Click to expand...
Click to collapse
Thank You for Your effort!
I'll keep on investigating for a solution.
Unfortunately the real test was horrible with Saber kernel, when I tested it in car the temperature got high soon and the thersholds were low again.
But it's a good idea to try o/c thank You very much!
I'll try it tomorrow, now I have to go to play Cod4... :laugh:
And I found that TWRP is recommended for Saber and a few minutes untouching after the restart so I'll try again.
Have a nice day!
you too bro, sorry i couldnt help more.
but if you post in the saber kernel thread there are some helpful and intelligent folks in there that may have a better solution for you.
enjoy cod
3vo3d said:
you too bro, sorry i couldnt help more.
but if you post in the saber kernel thread there are some helpful and intelligent folks in there that may have a better solution for you.
enjoy cod
Click to expand...
Click to collapse
Thank You again!
I got some experiences with the newest Saber kernel and I like it 'cause the first kernel I can use 100MHz step with and using 300MHz step too.
It seemes to be good at battery consumption too. My only problem that this kernel doesn't support STweaks so I can't regulate charging voltages like I used to. Perhaps only Perseus kernel makes it possible as I can't get any other programs for it till now. Or NEAK kernel and the new versions of AGNi pureSTOCK kernel as I read their pages. I'll try them some day. But Perseus is my favourite.
I think it's important to say that the kernel isn't UC/OC by default so this doesn't make any problems and it's not UV-ed too.
I set min. to 100MHz and max. to 1920MHz to test and it's stable till now. I tried to Overvolt slightly and had no change on media programs behavior they don't like each other as I see.
Trickster Mod is nice 'cause it shows the CPU temperature which was helpful to understand this regulations of thermal control are needed.
When I tested it turned out that CPU is below 70 degrees while the battery temparuture is 'only' about 40 degrees.
So thanks for Your kind advises!
wow. Ok i think i understood most of your post. probably a little bit over my head but i need to learn.
I really like the new kernel im getting 1% battery drain an hour with the screen off which truly is unheard of for me,
The kernel runs real smooth apart from when i play asphalt 8. Or i should say it runs smooth playing the game until the phone tries to do something else. For example if it attempts to update a programme or if a message/email comes through. then the game just lags and i have to wait for the phone to stop multi tasking before the car starts to move normally again.
So im surprised to read you say the kernel isn't uc/uv by default??? I was pretty positive it was. But i dont know for sure and im probably not clever enough to figure it out lol.
I wonder what settings i would need to increase to aid the phone in its multi tasking? Also there must be some kind of programme we could use that would test our specific phone/cpu and tell us which settings it would prefer. As i believe each phone will run slightly different?
You are right i remember reading the kernel does not work with stweaks.
I wish i could work with you and figure out how to optimise our settings but i simply dont have the skill set.
I presume you used trickster to overvolt slightly?
3vo3d said:
wow. Ok i think i understood most of your post. probably a little bit over my head but i need to learn.
I really like the new kernel im getting 1% battery drain an hour with the screen off which truly is unheard of for me,
The kernel runs real smooth apart from when i play asphalt 8. Or i should say it runs smooth playing the game until the phone tries to do something else. For example if it attempts to update a programme or if a message/email comes through. then the game just lags and i have to wait for the phone to stop multi tasking before the car starts to move normally again.
So im surprised to read you say the kernel isn't uc/uv by default??? I was pretty positive it was. But i dont know for sure and im probably not clever enough to figure it out lol.
I wonder what settings i would need to increase to aid the phone in its multi tasking? Also there must be some kind of programme we could use that would test our specific phone/cpu and tell us which settings it would prefer. As i believe each phone will run slightly different?
You are right i remember reading the kernel does not work with stweaks.
I wish i could work with you and figure out how to optimise our settings but i simply dont have the skill set.
I presume you used trickster to overvolt slightly?
Click to expand...
Click to collapse
No, I didn't overvolt at last. But once I tried and didn't helped on my problems.
Unfortunately now I'm back on Perseus kernel again 'cause some issues with Saber. It became crazy every time and locked my CPU on 160MHz only and only reboot helped.
The other issue was the stuck system server process what was active all night and didn't stop hard work.
Now I'm on reading the kernel's page till I get cleverer on it... then I perhaps try it again 'cause I liked it.
http://forum.xda-developers.com/showthread.php?t=2260397&page=5
Related
Hi guys,
I'm a bit of a noob so please bear with me. I recently rooted my phone (SGH-I747M Telus), I have CWM recovery installed. I was interested in overclocking so I installed this kernel on my stock rooted rom (I installed the "sammy" one). I also cleared the delvik cache, cache, and fixed permissions before rebooting. Now I'm having a weird problem with video playback. I get these bleep like sounds, like you might hear on a spaceship, lol. The normal audio plays in addition to these sounds. Yet, regular audio plays fine (mp3s), same with youtube. So, my question is, why? Is there any way of fixing this? I'd rather not play around the stock ROM. I made a backup before doing anything and recently tried to restore the boot, but I got an invalid md5 check.
-JC
Okay, I was able to fix my problem by flashing the stock at&t kernel... but I would still like to be able to overclock... is there another kernel that I can try or a way to fix the problem with the kernel I already tried? Thanks.
If you still want to try previous kernel your problem might be because of heavy undervolting , kernel creator posted this voltage chart.
You can experiment by increasing voltage and see if that helps.
Or you can just try this faux kernel , its pretty good also, we don't have many kernel choices for Samsung based roms at this early development cycle.
ghost77 said:
If you still want to try previous kernel your problem might be because of heavy undervolting , kernel creator posted this voltage chart.
You can experiment by increasing voltage and see if that helps.
Or you can just try this faux kernel , its pretty good also, we don't have many kernel choices for Samsung based roms at this early development cycle.
Click to expand...
Click to collapse
Thanks for the reply... but I was able to fix the problem. It was something wrong with the settings of SetCPU which I installed earlier. I changed it from on demand to performance and now all is well. Now I have a question about battery life. Will overclocking drain battery a lot faster? I imagine it would only make a difference if I was doing CPU intensive things.
JustChillin1414 said:
Thanks for the reply... but I was able to fix the problem. It was something wrong with the settings of SetCPU which I installed earlier. I changed it from on demand to performance and now all is well. Now I have a question about battery life. Will overclocking drain battery a lot faster? I imagine it would only make a difference if I was doing CPU intensive things.
Click to expand...
Click to collapse
Well.. performance setting makes it so that your CPU runs 100% all the time. I don't think that will be battery friendly . Overclock generally uses more power and battery longevity will depend on your usage.
You can try messing with setcpu settings. Try Conservative, then limit minimum speed to 384 and max to your preference. Try your movie again.
Current kernels and setcpu are a bit quirky.
I had the same issues on ktoonsez Sammy. Ended up back at stock AT&T. I've heard it's an issue with many of the kernels but a fix is on the way. Couldn't find a way to get rid of it, but that's not to say it can't be done. Don't have much time to tinker right now.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Its a known issue on ktoonsez kernel. Flash faux's kernel, it has the same features (as well as GPU OC) and doesn't have the audio issue.
Korean ver.
Sent from my LG-F180K using xda app-developers app
nope, same with latest 4.0.4
Much better now that it's rooted and setCPU profiles are enabled once again F180L owner.
I actually see a really nice improvement in battery life over 4.0.4. My wakelocks are now 1/4 of what they were. My problem is CPU related - cant get up (to 1.5 ghz... Throttled down to 1.1 almost all the time)
Emm, why do you need 1.5ghz?
Tim4 said:
Emm, why do you need 1.5ghz?
Click to expand...
Click to collapse
I am so confused by this question
Because, like many other people, I bought this phone in part for its processing power. I could have saved a lot of money by getting a slower but uncrippled phone (even stock gingerbread on my Galaxy S was 'good enough' for basic tasks). And yes, I have noticed lags since the speed has been mostly capped at 1.1ghz. I dont expect there to be full speed all the time, but I'd like it to be as snappy as possible when I am doing light activities with it, like web browsing. Why would anybody be content to have a 30% reduction in their phone's capabilities?
UPDATE: the lags I was experiencing seem to have been softare related. They appear to have disappeared after a clean install of JB and manual install of all apps from play store
---------- Post added at 12:24 PM ---------- Previous post was at 12:09 PM ----------
Hentitan said:
Korean ver.
Sent from my LG-F180K using xda app-developers app
Click to expand...
Click to collapse
Oh yeah. What is draining your battery? Is it a specific application or just the OS? If its the OS you can install Better Battery Stats and take a look at your kernel wakelock statistics.
Something wrong with your unit, cause mine one doesnt lag at all even on 700mhz with 2 cores disabled.
Also on 1.1ghz its still most powerfull CPU on the market, but its your way.
I believe you can disable thermal protection in service menu.
Tim4 said:
Something wrong with your unit, cause mine one doesnt lag at all even on 700mhz with 2 cores disabled.
Also on 1.1ghz its still most powerfull CPU on the market, but its your way.
I believe you can disable thermal protection in service menu.
Click to expand...
Click to collapse
Thanks for your advice to check the service menu in more depth but I didnt see the option there. I wouldnt really want to disable it if I could since it does have a use (I'd rather my battery didnt overheat and explode or something ).
Unlikely that there is something wrong with my unit. The lags arent choppy, per se, but more fractional delays that werent there before the upgrade to JB. I probably would not have said anything if I hadn't seen the phone's prior behaviour. And yes, it is my way - I like things to function as they were intended regardless of whether the current performance is "good enough". Lopping off the top multiplier almost entirely seems like a crude way to regulate the operation and temperature of the phone [.. but the new information below suggests that this isnt intentional...] . If I have to compromise at some level, I will gladly take this (nearly imperceptible) loss of function for the improved battery life I am seeing in this ROM.
Update: the weird frequencies I have been seeing have been reported by others using the same rom as me. It seems to be related to the kernel.
Here we go. Just installed setcpu to show you the service settings works. Also im able to set 100% brightness whenever i want.
I used to underclock cpu on ics, but someday ive realized LTE eats battery 10x times faster, so everything ive done with setcpu is kinda useless.
So i just dont care whats going on with cpu freq since it still lighting fast.
Also JB doesnt lag even on old 1ghz devices cause of triple buffer and forced vsync. I think you still should check your phone.
p.s. Latest F180K official rom
Tim4 said:
Here we go. Just installed setcpu to show you the service settings works. Also im able to set 100% brightness whenever i want.
I used to underclock cpu on ics, but someday ive realized LTE eats battery 10x times faster, so everything ive done with setcpu is kinda useless.
So i just dont care whats going on with cpu freq since it still lighting fast.
Also JB doesnt lag even on old 1ghz devices cause of triple buffer and forced vsync. I think you still should check your phone.
p.s. Latest F180K official rom
Click to expand...
Click to collapse
Thanks again for your advice, although that screenshot has nothing to do with the service settings and JB does lag quite a bit on older 1 Ghz devices, as I can attest by having JB running on my Samsung Galaxy S. I reinstalled JB as cleanly as possible and manually reinstalled all my usual apps from the play store and the lags seem to have disappeared. Maybe there was a problem with my recovery softare ? I edited my earlier post to reflect this, but the change in CPU frequency is still there.
As I was trying to say before, you and I are using different phones and different roms. It seems to be a recognized quirk with the rom I am using that while the phone is unplugged, the cpu frequency and screen brightness are very heavily regulated (cannot run @ 1.5 or full brightness even while phone is cool; goes away when the phone is plugged in). Please do not start telling me that 100% brightness is as unnecessary as 100% cpu frequency (I dont ever use 100%). I think you and I will just disagree on acceptable limitations of capabilities, even if I agree with you that they dont affect normal phone use at all. I see it as a mystery that needs solving.
And I am glad to hear that your phone works so well with the official rom . I could wait for official JB on the e973 but I'm impatient and Houstonn did a great job with the port.
So your phone's service menu doesnt have the High Temperature Property and the Thermal Daemon disable buttons?
You still can ask someone to disassemble korean version service menu to find the flags so you can use it on E973
Tim4 said:
So your phone's service menu doesnt have the High Temperature Property and the Thermal Daemon disable buttons?
You still can ask someone to disassemble korean version service menu to find the flags so you can use it on E973
Click to expand...
Click to collapse
There's a chance I'm still just missing it or looking for the wrong thing... Could I ask you to just take a screen shot of your menu setting for me?
Sure lol
Tim4 said:
Sure lol
Click to expand...
Click to collapse
ha ha, yeah I definitely dont have that option. Thanks a lot.
UPDATE: This fixed all problems
no hidden menu for korean versions?
Sent from my LG-F180K using xda app-developers app
Actually the screenshot is from F180K
3845#*180#
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Add the Gs4 as well
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Seraz007 said:
Add the Gs4 as well
Click to expand...
Click to collapse
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
beekay201 said:
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
Click to expand...
Click to collapse
I'ts not problem about OC , even if i set to 1,2ghz there are no changes , i just dont know what could be the problem , cuz the game runs smooth on other phone which is not good as this one , thats weird , im not controlling voltages , i didn't touch anything.
samersh72 said:
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
Click to expand...
Click to collapse
No , it didnt help. I already tried it before , but when i Force 4x MSAA it just makes game more lagy , maybe cuz of game , anyway i gave an example Temple Run 2 , but even other 3D games are laging , why shouldnt I OC to 1.6 , could brick phone or ?
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
beekay201 said:
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
Click to expand...
Click to collapse
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
wizox said:
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
Click to expand...
Click to collapse
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
beekay201 said:
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
Click to expand...
Click to collapse
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
wizox said:
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
Click to expand...
Click to collapse
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
wizox said:
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
Click to expand...
Click to collapse
Do you even know anything about ROMs and kernels?
When I said have you tested this on stock kernel, I meant, did you try this on stock ROM, but specified kernel because, it's like, common knowledge for someone who flashes ROMs, that custom ROMs devs often alter kernel (and ramdisk) to support features on their custom roms..
Have you for example tried reflashing PA, and just PA, nothing else? Does it lag then?
Have you for example tried fully reverting back to stock? (factory images)
Why is it that you just want your games not to lag, not even trying to gain a deeper understanding about what people are telling you.
Listen, this is the last time I'm saying this:
I told you to check your voltages, since you're OC'ing, and expecting SR to do the job for you.
Test by reflashing again PA, with no custom kernel.
Test by going back to stock, through fastboot/factory images.
Temple Run 2 on best quality lags in mine too.Probably it was designed for 1080p.Just keep the graphics a little lower, doesn't affect gameplay or quality
Sent from my maguro
I searched the forum and saw some people had similar issues but nothing in the other threads seems to have fixed their issue.
I am having huge FPS drops in games after about 5 minutes of play time. I never had this problem when I was on stock, and ever since I have tried a few different ROMs and all of them have the same result. I found that if I turn my screen off for ~30 seconds the lag will go away for about 2 minutes but just comes right back.
Currently running SOKP ROM.
Games that I play are Valkyrie Crusade, The Gate, Heroes of Camelot.
Any help would be appreciated!
Ok, so the issue seems to only be present while charging. Does anyone have any suggestion on how to alleviate this issue without unplugging my phone from the charger? My battery does not last as long as it used to and I can only play for about a half hour before my phone battery starts to get extremely low.
Does your Rom allow for Changing of Governors and Voltages ? If so, then try Trickster Mod. If it does not allow such changes then switch to a AOSP Rom and then Flash KT747 Kernel by @ktoonsez. that kernel has profiles specifically tailored for Gaming.
That kernel was not compatible with AOKP Roms until Recently. I do not use AOKP Roms so I am not sure if AOKP Code has changed to make it compatible.
Perseus71 said:
Does your Rom allow for Changing of Governors and Voltages ? If so, then try Trickster Mod. If it does not allow such changes then switch to a AOSP Rom and then Flash KT747 Kernel by @ktoonsez. that kernel has profiles specifically tailored for Gaming.
That kernel was not compatible with AOKP Roms until Recently. I do not use AOKP Roms so I am not sure if AOKP Code has changed to make it compatible.
Click to expand...
Click to collapse
The app from the app store? I don't know anything about Trickster mod.
Yes its the App in Play Store. If you are not comfortable tweaking those parameters, then leave that alone.
Perseus71 said:
Yes its the App in Play Store. If you are not comfortable tweaking those parameters, then leave that alone.
Click to expand...
Click to collapse
Any recommendations on settings then?
Explore the thread on Undervolting / Overclocking in my signature. Let me know if you are comfortable with making that kind of changes.
Perseus71 said:
Explore the thread on Undervolting / Overclocking in my signature. Let me know if you are comfortable with making that kind of changes.
Click to expand...
Click to collapse
I checked it out but it seems pretty confusing.. still not sure what settings I should change. Why would it be different from stock rom though?
In that case, please use the App "Fast Reboot Pro". It also creates a shortcut on your homescreen that, when clicked, will improve performance.
You may also want to apply V6 Supercharger Mod by @zeppelinrox.
Perseus71 said:
In that case, please use the App "Fast Reboot Pro". It also creates a shortcut on your homescreen that, when clicked, will improve performance.
You may also want to apply V6 Supercharger Mod by @zeppelinrox.
Click to expand...
Click to collapse
My ROM is 4.4.2. Do I still need to apply the Ultimatic Jar Patcher?
I have not kept up with the more recent developments on that thread. Search the thread or post the question on it.
If your battery is getting low that quickly and easily your best bet, imo, is to replace it. Aa they age and lose capacity they also lose the ability to run the hardware effectively. Youre probably seeing lag because it just isnt able to provide the stable voltage required to run the cpu/gpu at full throttle very long.
Sent from my SGH-T999 using Tapatalk
Perseus71 said:
I have not kept up with the more recent developments on that thread. Search the thread or post the question on it.
Click to expand...
Click to collapse
I tried these modifications and I am still getting terrible FPS drops.
Your only other option is Fast Reboot Pro in lieu of Governor changes and Overclocking.
I have a S4 mini running custom carbon kk unofficial 4.4.3 as it comes with the settings to set CPU's and governors but the phone keeps changing the min to around 1400 but the max stays at 1700.i don't notice until my battery is draining really fast or gets hot. anyone kno a fix to this?
matizkool said:
I have a S4 mini running custom carbon kk unofficial 4.4.3 as it comes with the settings to set CPU's and governors but the phone keeps changing the min to around 1400 but the max stays at 1700.i don't notice until my battery is draining really fast or gets hot. anyone kno a fix to this?
Click to expand...
Click to collapse
Which governor is it using to set a min of 1400? Ever likely it gets hot and eats power! I use f4k's kernel, and the 'Performance Control' app to look at and alter stuff - you don't say what you use or have tried.
There is a Carbon 4.4.4 available with f4ktion 1.5 kernel - might be an idea to flash that and the problem might go away!
xbin said:
Which governor is it using to set a min of 1400? Ever likely it gets hot and eats power! I use f4k's kernel, and the 'Performance Control' app to look at and alter stuff - you don't say what you use or have tried.
There is a Carbon 4.4.4 available with f4ktion 1.5 kernel - might be an idea to flash that and the problem might go away!
Click to expand...
Click to collapse
It's on every governor this happens but I use Wheatley. I would manually set it to around the 300s but in a couple of hours it would auto set at 1400 on its on. This causes my battery to drain my kernel version is 3.4.91 f4ktion 1.4.5 eur lte
matizkool said:
It's on every governor this happens but I use Wheatley. I would manually set it to around the 300s but in a couple of hours it would auto set at 1400 on its on. This causes my battery to drain
Click to expand...
Click to collapse
Strangely enough I've settled with Wheatley too! but it spends most of its time at 162 when not in deep sleep (a bit like me!). This really needs posting in the Carbon thread so I would post a few more things here to help or comment on stuff to get to 10 posts and then ask in there. I can't think what could be causing that behaviour, if it was me it would be bye bye 4.4.3 and hello 4.4.4
xbin said:
Strangely enough I've settled with Wheatley too! but it spends most of its time at 162 when not in deep sleep (a bit like me!). This really needs posting in the Carbon thread so I would post a few more things here to help or comment on stuff to get to 10 posts and then ask in there. I can't think what could be causing that behaviour, if it was me it would be bye bye 4.4.3 and hello 4.4.4
Click to expand...
Click to collapse
Yeah i flashed to 4.4.4 thanks though
Never mind above still happens even though I flashed 4.4.4
matizkool said:
Never mind above still happens even though I flashed 4.4.4
Click to expand...
Click to collapse
Does the actual minimum change rather than it simply running continually at 1400+ and if so which governor does it change to if any!
I read somewhere in the Carbon thread someone was having similar problems so they flashed the kernel twice, one directly after the other; seems something wasn't getting written correctly the first time but was the second, and the problem went away. Worth a go...
xbin said:
Does the actual minimum change rather than it simply running continually at 1400+ and if so which governor does it change to if any!
I read somewhere in the Carbon thread someone was having similar problems so they flashed the kernel twice, one directly after the other; seems something wasn't getting written correctly the first time but was the second, and the problem went away. Worth a go...
Click to expand...
Click to collapse
I found this : Q: CPU/GPU frequency doesn't stick?
A: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel feature that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues.
Is this a fix?
matizkool said:
I found this : Q: CPU/GPU frequency doesn't stick?
A: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel feature that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues.
Is this a fix?
Click to expand...
Click to collapse
It could help. Trickster is good. However, this suggests that there is something else causing or forcing the frequency setting to be changed. The question is what? and I've no idea:crying:
Haha I found the problem it was either this battery saver app or I changed to scheduler to anything besides row
matizkool said:
Haha I found the problem it was either this battery saver app or I changed to scheduler to anything besides row
Click to expand...
Click to collapse
Thats good. It was probably the battery saver because they usually do the opposite!