Korean ver.
Sent from my LG-F180K using xda app-developers app
nope, same with latest 4.0.4
Much better now that it's rooted and setCPU profiles are enabled once again F180L owner.
I actually see a really nice improvement in battery life over 4.0.4. My wakelocks are now 1/4 of what they were. My problem is CPU related - cant get up (to 1.5 ghz... Throttled down to 1.1 almost all the time)
Emm, why do you need 1.5ghz?
Tim4 said:
Emm, why do you need 1.5ghz?
Click to expand...
Click to collapse
I am so confused by this question
Because, like many other people, I bought this phone in part for its processing power. I could have saved a lot of money by getting a slower but uncrippled phone (even stock gingerbread on my Galaxy S was 'good enough' for basic tasks). And yes, I have noticed lags since the speed has been mostly capped at 1.1ghz. I dont expect there to be full speed all the time, but I'd like it to be as snappy as possible when I am doing light activities with it, like web browsing. Why would anybody be content to have a 30% reduction in their phone's capabilities?
UPDATE: the lags I was experiencing seem to have been softare related. They appear to have disappeared after a clean install of JB and manual install of all apps from play store
---------- Post added at 12:24 PM ---------- Previous post was at 12:09 PM ----------
Hentitan said:
Korean ver.
Sent from my LG-F180K using xda app-developers app
Click to expand...
Click to collapse
Oh yeah. What is draining your battery? Is it a specific application or just the OS? If its the OS you can install Better Battery Stats and take a look at your kernel wakelock statistics.
Something wrong with your unit, cause mine one doesnt lag at all even on 700mhz with 2 cores disabled.
Also on 1.1ghz its still most powerfull CPU on the market, but its your way.
I believe you can disable thermal protection in service menu.
Tim4 said:
Something wrong with your unit, cause mine one doesnt lag at all even on 700mhz with 2 cores disabled.
Also on 1.1ghz its still most powerfull CPU on the market, but its your way.
I believe you can disable thermal protection in service menu.
Click to expand...
Click to collapse
Thanks for your advice to check the service menu in more depth but I didnt see the option there. I wouldnt really want to disable it if I could since it does have a use (I'd rather my battery didnt overheat and explode or something ).
Unlikely that there is something wrong with my unit. The lags arent choppy, per se, but more fractional delays that werent there before the upgrade to JB. I probably would not have said anything if I hadn't seen the phone's prior behaviour. And yes, it is my way - I like things to function as they were intended regardless of whether the current performance is "good enough". Lopping off the top multiplier almost entirely seems like a crude way to regulate the operation and temperature of the phone [.. but the new information below suggests that this isnt intentional...] . If I have to compromise at some level, I will gladly take this (nearly imperceptible) loss of function for the improved battery life I am seeing in this ROM.
Update: the weird frequencies I have been seeing have been reported by others using the same rom as me. It seems to be related to the kernel.
Here we go. Just installed setcpu to show you the service settings works. Also im able to set 100% brightness whenever i want.
I used to underclock cpu on ics, but someday ive realized LTE eats battery 10x times faster, so everything ive done with setcpu is kinda useless.
So i just dont care whats going on with cpu freq since it still lighting fast.
Also JB doesnt lag even on old 1ghz devices cause of triple buffer and forced vsync. I think you still should check your phone.
p.s. Latest F180K official rom
Tim4 said:
Here we go. Just installed setcpu to show you the service settings works. Also im able to set 100% brightness whenever i want.
I used to underclock cpu on ics, but someday ive realized LTE eats battery 10x times faster, so everything ive done with setcpu is kinda useless.
So i just dont care whats going on with cpu freq since it still lighting fast.
Also JB doesnt lag even on old 1ghz devices cause of triple buffer and forced vsync. I think you still should check your phone.
p.s. Latest F180K official rom
Click to expand...
Click to collapse
Thanks again for your advice, although that screenshot has nothing to do with the service settings and JB does lag quite a bit on older 1 Ghz devices, as I can attest by having JB running on my Samsung Galaxy S. I reinstalled JB as cleanly as possible and manually reinstalled all my usual apps from the play store and the lags seem to have disappeared. Maybe there was a problem with my recovery softare ? I edited my earlier post to reflect this, but the change in CPU frequency is still there.
As I was trying to say before, you and I are using different phones and different roms. It seems to be a recognized quirk with the rom I am using that while the phone is unplugged, the cpu frequency and screen brightness are very heavily regulated (cannot run @ 1.5 or full brightness even while phone is cool; goes away when the phone is plugged in). Please do not start telling me that 100% brightness is as unnecessary as 100% cpu frequency (I dont ever use 100%). I think you and I will just disagree on acceptable limitations of capabilities, even if I agree with you that they dont affect normal phone use at all. I see it as a mystery that needs solving.
And I am glad to hear that your phone works so well with the official rom . I could wait for official JB on the e973 but I'm impatient and Houstonn did a great job with the port.
So your phone's service menu doesnt have the High Temperature Property and the Thermal Daemon disable buttons?
You still can ask someone to disassemble korean version service menu to find the flags so you can use it on E973
Tim4 said:
So your phone's service menu doesnt have the High Temperature Property and the Thermal Daemon disable buttons?
You still can ask someone to disassemble korean version service menu to find the flags so you can use it on E973
Click to expand...
Click to collapse
There's a chance I'm still just missing it or looking for the wrong thing... Could I ask you to just take a screen shot of your menu setting for me?
Sure lol
Tim4 said:
Sure lol
Click to expand...
Click to collapse
ha ha, yeah I definitely dont have that option. Thanks a lot.
UPDATE: This fixed all problems
no hidden menu for korean versions?
Sent from my LG-F180K using xda app-developers app
Actually the screenshot is from F180K
3845#*180#
Related
Hi,
I've had my Archos G9 80 updated to the latest android official 4.0.5 from and since then i'm expriencing lots of crushes and freezes. I'm getting them randomly with no specific app working.
Also, i have tried to do full formats (Android + Data), and still having same issues.
Does anyone have any idea what else i can try?
Thanks.
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
DeeDroid said:
I changed the CPU govenor from "hotplug" to "interactive".
Click to expand...
Click to collapse
how this is done? Ι have the same problem!
africa_twin said:
how this is done? Ι have the same problem!
Click to expand...
Click to collapse
Yes, can this be done from the phone itself? Within the ROM?
You can set this in any tool that is intended for overclocking. I don't overclock, I only changed the Govenor.
I use "SetCPU". ("No-frills CPU Control" should do the same.)
So does this have any other effects on the phone?
RichWPX said:
So does this have any other effects on the phone?
Click to expand...
Click to collapse
Nothing too serious. Your CPU is clocked dynamically so it doesn't run full speed when there is nothing to compute(save energy). To my understanding the govenor is basically a policy to manage how quickly the frequency steps up/down on changing CPU load. So "powersave" is supposed to save energy but make the system a little less reactive than "interactive" Governor for example. I think I read somewhere "hotplug" deactivates the second core on low load situations, I suspect for some strange reason my device might have crashed sometimes on trying to wake up the sleeping second core. Well maybe I'm wrong, that's why I'm interested if it helps others.
I didn't notice any change in battery lifetime, mostly it's the display anyway that drains the battery. Everything is running well, battery lifetime is great too and no crash/freeze at all since i changed that setting and it crashed almost every damn day before, no matter if it was Honeycomb or ICS.
I downgraded the device to 4.0.4 and since then, no crushes.. I guess for some reason 4.0.5 isn't stable on my device.. ill stick with this version unroll they get another one out..
To downgrade, just install official update file of the version you want to upgrade to..
DeeDroid said:
Nothing too serious. Your CPU is clocked dynamically so it doesn't run full speed when there is nothing to compute(save energy). To my understanding the govenor is basically a policy to manage how quickly the frequency steps up/down on changing CPU load. So "powersave" is supposed to save energy but make the system a little less reactive than "interactive" Governor for example. I think I read somewhere "hotplug" deactivates the second core on low load situations, I suspect for some strange reason my device might have crashed sometimes on trying to wake up the sleeping second core. Well maybe I'm wrong, that's why I'm interested if it helps others.
I didn't notice any change in battery lifetime, mostly it's the display anyway that drains the battery. Everything is running well, battery lifetime is great too and no crash/freeze at all since i changed that setting and it crashed almost every damn day before, no matter if it was Honeycomb or ICS.
Click to expand...
Click to collapse
Thanks! And I have notices ICS is not as snappy as GB was... I mean GB flew! Swiping the screen, it feels a little off now.
RichWPX said:
Thanks! And I have notices ICS is not as snappy as GB was... I mean GB flew! Swiping the screen, it feels a little off now.
Click to expand...
Click to collapse
GB? Gingerbread? Guess you mean Honeycomb. Anyway, I experienced ICS to be much better.
DeeDroid said:
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
Click to expand...
Click to collapse
changing govenor from "hotplug" to "interactive" seems to help against random freezes. 4 days without problems until now i had freezes with ics, but never with honeycomb.
device: archos 101g9
[ROM] Archos ICS - Firmware 4.0.5(4.0.3) - ROOT & BUSYBOX , Only for SDE (thanks surdu_petru)
DeeDroid said:
I had lots of freezes too (not only with the latest firmware). They seem to be gone since I changed the CPU govenor from "hotplug" to "interactive". I'm not sure yet that it was the reason, but try it and let us know if it helps.
Click to expand...
Click to collapse
That seems to be my problem too. Setcpu requires root. is there a very easy way to do this, just to run this setcpu? There used to be a z4 tool, but can't seem to find it anymore.
Edit I see that I need superoneclick. Will temporary root suffice or will I need permanent root to change the governor setting.and keep it so.
Unfortunately all know temp root variants tend to brake things- im Honeycomb sound, in ICS 3d driver.
The only real option is to enable SDE and use custom firmware.
As for freezes- try reinstalling apps. Direct upgrade from Honeycomb does not work for all
tapatalked from Xperia Arc S
DeeDroid said:
GB? Gingerbread? Guess you mean Honeycomb. Anyway, I experienced ICS to be much better.
Click to expand...
Click to collapse
I have the same experience. Hc was laggy and slow. Ics is much faster and smoother.
Sent from my ARCHOS 80G9 using Tapatalk
gen_scheisskopf said:
Unfortunately all know temp root variants tend to brake things- im Honeycomb sound, in ICS 3d driver.
The only real option is to enable SDE and use custom firmware.
As for freezes- try reinstalling apps. Direct upgrade from Honeycomb does not work for all
tapatalked from Xperia Arc S
Click to expand...
Click to collapse
sorry for the n00b question, but SDE stands for ??? S ? Develeper Edition ?
Will "Superoneclick" not root my device ?
sbtwister said:
sorry for the n00b question, but SDE stands for ??? S ? Develeper Edition ?
Click to expand...
Click to collapse
Special Developer Edition
sbtwister said:
Will "Superoneclick" not root my device ?
Click to expand...
Click to collapse
No, it won't. Gen9 system layout is different than for most other devices
hey, back to topic
5 days without freeze with govenor "interactive". i witched back to "hot plug" this morning and had to reboot my tablet 2 times today. for my case, "interactice" seems to help against random freezes.
mines performance intstead of interactive... experienced some freezing n interactive..
Man I'm really pissed.
Yesterday I had to hard reboot 7 times
Sent from my X8 using xda premium
hmm,
sounds not good. archos stands not for high quality i guess. we get what we pay . i had an archos 101g8, now a 101g9 and trouble with hard-/firmwares since 2010. i think, this was the last one - no furthermore advantures
@IrishStuff09: you did reformat for ics or upgrade from honeycomb? the best way is to start from scratch and skip upgrades.
Hi!
It's the summer where I live and it's like above 40°C in my appartment (Yeah, I've a free sauna, jealous?), and this cause my One X to overheat all the time, I'm not even doing "heavy" stuff, just browsing the Internet or Facebook via Wifi, I already tried to slow down the CPU to 1200Mhz but it is still very hot, is there a solution to avoid this issue (apart from "DON'T TOUCH IT!"), I can't believe that Taiwan is a cold country and that the HTC was not made to work at 40°C...
You can see my ROM and Kernel above this message (signature) I'm trying to install Viper ROM to see if it fixes the issue... :fingers-crossed:
Nevermind, I fixed it, I used wrong voltage and too low down threshold value in SetCPU which caused the CPU to overheat and stand longer activated, silly me
Tableuraz said:
Nevermind, I fixed it, I used wrong voltage and too low down threshold value in SetCPU which caused the CPU to overheat and stand longer activated, silly me
Click to expand...
Click to collapse
Could you tell us what configuration you're using? I'm kinda having the same problem.
Appreciate your help.
cpu over heating
alibahaloo said:
Could you tell us what configuration you're using? I'm kinda having the same problem.
Appreciate your help.
Click to expand...
Click to collapse
Tableuraz said:
Nevermind, I fixed it, I used wrong voltage and too low down threshold value in SetCPU which caused the CPU to overheat and stand longer activated, silly me
Click to expand...
Click to collapse
i would like to know the same thing, what voltage calibration did you use and when you were able to get the temp down to what you liked did you still have good gaming performance?
niceguy_1920 said:
i would like to know the same thing, what voltage calibration did you use and when you were able to get the temp down to what you liked did you still have good gaming performance?
Click to expand...
Click to collapse
he fixed nothing, he messed up his cpu settings and noticed it later, so he put the cpu settings back to stock.
alutastisch said:
he fixed nothing, he messed up his cpu settings and noticed it later, so he put the cpu settings back to stock.
Click to expand...
Click to collapse
gotcha....:silly:
niceguy_1920 said:
gotcha....:silly:
Click to expand...
Click to collapse
Wow, what a up !
Seriously though, I'm not using my HTC One X anymore, but last time I used it, I used Faux kernel with -100 uV and some Ondemand governor tweaks (mostly to lower frequencies at as state that is just above lags) and it was running lagfree and a lot cooler than stock, but I hope you don't mind loosing a bit of 3D perf...
I wanted to investigate the sporadic freezing in my Galaxy S2. So, I turned on, show CPU usage under the developer's options in ICS. For reference I'm currently running Jedi Knight's latest rom.
I have attached a picture of my cpu usage while at my home screen. The number I've read to be average loads, and anything over 1.00 means trouble. I'm consistently over 10 for my one, five, and fifteen minutes averages. Also, my red bar which apparently measures time in kernel, sometimes spikes and correlates with a brief moment of unresponsiveness.
I've only seen two other screenshots and both users were under two. I was curious what everyone else's loads were. Also, let me know how frequent you have brief freezes, what kind of background apps you usually run. Include info like how many activities do you allow to run in background, do you force gpu rendering, etc. I can't wait to see other's results.
Sent from my SGH-T989
I got like 9/10/11 on mine. I always suspected that I have unusually bad battery life no matter what ROM I'm on, now I wonder if this has anything to do with it...
I'm on Eugene's Plain Jane ROM, which is an AOSP ICS ROM. The Manage Apps menu shows about 10 processes running. Force GPU is on.
ToastMan12 said:
I got like 9/10/11 on mine. I always suspected that I have unusually bad battery life no matter what ROM I'm on, now I wonder if this has anything to do with it...
I'm on Eugene's Plain Jane ROM, which is an AOSP ICS ROM. The Manage Apps menu shows about 10 processes running. Force GPU is on.
Click to expand...
Click to collapse
Thanks, for the response. Do you ever experience temporary freezes? My goal is to figure out if my mini-freezes are caused my memory or CPU.
Sorry for the bad picture quality. I posted through the android app. Anyway, I've left my phone alone for 15 minutes, and I got 8.7/8.7/8.7. I wonder if this uses a different scale than the Unix scale.
rsromano said:
Thanks, for the response. Do you ever experience temporary freezes? My goal is to figure out if my mini-freezes are caused my memory or CPU.
Sorry for the bad picture quality. I posted through the android app. Anyway, I've left my phone alone for 15 minutes, and I got 8.7/8.7/8.7. I wonder if this uses a different scale than the Unix scale.
Click to expand...
Click to collapse
Well, I wouldn't call them freezes, but sometimes performance seem to degrade for a fraction of a second and I experience like a small stutter. Doesn't seem to be unusual, but I'm not sure...
ToastMan12 said:
Well, I wouldn't call them freezes, but sometimes performance seem to degrade for a fraction of a second and I experience like a small stutter. Doesn't seem to be unusual, but I'm not sure...
Click to expand...
Click to collapse
That's normal. The only roms I know that work 100% smooth are Jelly Bean Roms on OFFICIALLY supported devices like the Nexus S and Galaxy Nexus. (Yes the Nexus S runs smoother than this phone. Not faster, smoother) but what OP is stating isn't normal in the least bit. My advice? Ditch that rom. I've never experienced such high CPU activity on any rom and its bad news. Your phone will eventually overheat and shut down. Never a good thing when the SoC gets no form of cooling.
Sent from my SGH-T989 using xda premium
RushAOZ said:
That's normal. The only roms I know that work 100% smooth are Jelly Bean Roms on OFFICIALLY supported devices like the Nexus S and Galaxy Nexus. (Yes the Nexus S runs smoother than this phone. Not faster, smoother) but what OP is stating isn't normal in the least bit. My advice? Ditch that rom. I've never experienced such high CPU activity on any rom and its bad news. Your phone will eventually overheat and shut down. Never a good thing when the SoC gets no form of cooling.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
So what do you do when CPU activity is still showing well over 1.0 (5-9) even after installing a fresh ROM? I just flashed the latest official CM10 nightly and have not installed anything other then gapps, and cpu usage is showing 9/8/5.
ToastMan12 said:
So what do you do when CPU activity is still showing well over 1.0 (5-9) even after installing a fresh ROM? I just flashed the latest official CM10 nightly and have not installed anything other then gapps, and cpu usage is showing 9/8/5.
Click to expand...
Click to collapse
Whoa.. if changing software doesn't help then you for yourself a hardware issue. If you experience lag and heat issues no matter what call tmo and get that handset replace.
Sent from my SGH-T989 using xda premium
That's the thing. I don't experience any lag and the phone is perfectly cool. It gets hot on intensive use, though.
Sent from my SAMSUNG-SGH-T989 using xda premium
I experience the exact same thing as ToastMan. My device always runs cool except when have multiple, heavy-use apps open for an extended period of time. My cpu usage percentages and used memory is always reasonable. Could it be something like an incompatible kernel? What are some debugging steps we could take? What kind of information would be valuable to you that we could provide?
Sent from my SGH-T989
rsromano said:
I experience the exact same thing as ToastMan. My device always runs cool except when have multiple, heavy-use apps open for an extended period of time. My cpu usage percentages and used memory is always reasonable. Could it be something like an incompatible kernel? What are some debugging steps we could take? What kind of information would be valuable to you that we could provide?
Sent from my SGH-T989
Click to expand...
Click to collapse
Is there a chance that maybe the reading is just wrong? Or maybe normal values on Android are different?
If several other people could just check their results and post them here it will be very helpful.
ToastMan12 said:
Is there a chance that maybe the reading is just wrong? Or maybe normal values on Android are different?
If several other people could just check their results and post them here it will be very helpful.
Click to expand...
Click to collapse
I was also thinking that it could be calibrated differently somehow. Like, if it was off by a factor of ten. My values would be much more reasonable. But I have seem several screenshots in the 1.0 range.
ToastMan12 said:
So what do you do when CPU activity is still showing well over 1.0 (5-9) even after installing a fresh ROM? I just flashed the latest official CM10 nightly and have not installed anything other then gapps, and cpu usage is showing 9/8/5.
Click to expand...
Click to collapse
Min has always been in the area of 9/9/10ish. My screen has never stuttered not even on GB, no rrs or sods on official cm10 so far either. My battery life is an entire day (16hrs) of listening to music/playing emulators nonstop.
Make sure you have the 2 idle processes in your battery. If you don't then your phone doesn't idle which will kill your battery life.
If you are using cwm non-touch make sure you use dark side tools or upgrade to touch recovery (cwm 6.x.x.x or TWRP... my favorite). Reinstall your ROM with a complete wipe, install gapps, boot it up then wait 10 mins before doing any setup.
If you are idling then look at your batt stats again... screen is probably waaaay up there... play with your brightness settings.
Hope this helped
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Relsig said:
Min has always been in the area of 9/9/10ish. My screen has never stuttered not even on GB, no rrs or sods on official cm10 so far either. My battery life is an entire day (16hrs) of listening to music/playing emulators nonstop.
Make sure you have the 2 idle processes in your battery. If you don't then your phone doesn't idle which will kill your battery life.
If you are using cwm non-touch make sure you use dark side tools or upgrade to touch recovery (cwm 6.x.x.x or TWRP... my favorite). Reinstall your ROM with a complete wipe, install gapps, boot it up then wait 10 mins before doing any setup.
Click to expand...
Click to collapse
Can you post a screenshot of your idle processes, please?
rsromano said:
Can you post a screenshot of your idle processes, please?
Click to expand...
Click to collapse
Cell standby, phone idle. They should be higher but I had my screen on several hours more than normal today (hence screen being 55%). Top reads 18 hours on, 21% battery life remaining.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
My N2 makes me crazy when it gets warm.
When it reaches about 36 celsius degrees it starts with frequency limit of 800MHz.
The second step is making 2 cores offline and at last my gadget becomes limited to 2 cores at a max. of 500MHz.
It becomes almost unusable for me when in car. I use two navis in multiwindow (Waze and Sygic) and AutoGuard recording in background with FullHD and in about 5 minutes it's restricted hardly.
I know it's for safety reasons but I think it's too strict.
Is there a possibility to raise the thresholds of these by a few degrees?
What kernels support this?
There is a nice app called Android Tuner which is able to set these tresholds but it is for Qualcomm CPU-s only...
Thanks for any answers in advance!
le_vente said:
My N2 makes me crazy when it gets warm.
When it reaches about 36 celsius degrees it starts with frequency limit of 800MHz.
The second step is making 2 cores offline and at last my gadget becomes limited to 2 cores at a max. of 500MHz.
It becomes almost unusable for me when in car. I use two navis in multiwindow (Waze and Sygic) and AutoGuard recording in background with FullHD and in about 5 minutes it's restricted hardly.
I know it's for safety reasons but I think it's too strict.
Is there a possibility to raise the thresholds of these by a few degrees?
What kernels support this?
There is a nice app called Android Tuner which is able to set these tresholds but it is for Qualcomm CPU-s only...
Thanks for any answers in advance!
Click to expand...
Click to collapse
You can change a value in a file under system, but it is not so safe..
Mate996 said:
You can change a value in a file under system, but it is not so safe..
Click to expand...
Click to collapse
Very helpful...
Sent from my GT-N7100 using XDA Premium 4 mobile app
Mate996 said:
You can change a value in a file under system, but it is not so safe..
Click to expand...
Click to collapse
Not exactly understand...
There must be a safe setting for it as with Perseus kernel the thresholds are higher, but not too much. I forgot to edit my question according my experiences with Perseus.
At least with Perseus I get a max of 1000MHz at most cases but it is not enough for me cause I use apps needing high resources.
Would You be so kind to write about the value to be changed in order to get higher thresholds?
If I understand you correctly. Then you could try trickster mod.
Or try saber kernel. I use this baked into the Jedi rom.
Sent from my GT-N7105 using xda app-developers app
3vo3d said:
If I understand you correctly. Then you could try trickster mod.
Or try saber kernel. I use this baked into the Jedi rom.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Thank You for the advice!
Now I had some time so I'm on Saber kernel and just testing.
The testing is awesome till now: the phone is working more powerful with this kernel and doesn't get hot so soon. :good:
Oh, now there is something strange, the programs get FC-s...
The phone is on charger, I ran AutoGuard in the background in FullHD, Sygic and Waze in MultiWindow, VideoPlayer in popup with a FullHD video and SuperPlayer in popup with another FullHD video. It was extremely fine but after a few minutes the players collapsed and AutoGuard had an error. The system is stable anyway. It seems I have to restart phone now...
Edit: After restart I got an old problem back: Dropbox is unable to run again... I loved Perseus because of this, on Perseus this problem was away... I hope that I won't get the other issue back with my WiFi... And it seems, AutoGuard became stupid too... :crying:
I don't give up and keep on trying to make them ok.
But I can't find the thermal control feature in Trickster Mod Donation altough I have just a minute for it.
I am reading Trickster webpage to get ahead...
Question: Are You using Jedi ROM and have no thermal problems?
In that case I'm going to try that ROM, cause I'm on hunting for a ROM that works with no problems for me.
I tried some lately and till now Omega v18 was the best amongst them. I tried MIUI, ProBam, Hawkish in the last days and I get problems with all of them or had non-working applications and/or features which ones are essentials for me...
Edit: mmmmmmmm, as see there is no Jedi ROM for international N7100...
hey bro,
wow you seem to be a bit more advanced than me so maybe ive reached the limit of the advice i can give you.
However, if you inform me how to check for thermal problems i will surely do that and then report back.
the saber kernel to the best of my knowledge is underclocked so if you try to o/c it maybe that will prevent your fc's. I have read in the various threads, of which the community is very helpful, of some issues for heavy users due to the u/c.
Regarding the jedi rom i am a uk 7105 user and to the best of my knowledge i thought it would also work for international 7100 users?!?!
Here is the thread i use.
http://forum.xda-developers.com/showthread.php?t=1987634
reading the op of that thread it would appear you are correct. I do know they are working on version 18 so maybe that will work for you. fingers crossed.
3vo3d said:
hey bro,
wow you seem to be a bit more advanced than me so maybe ive reached the limit of the advice i can give you.
However, if you inform me how to check for thermal problems i will surely do that and then report back.
the saber kernel to the best of my knowledge is underclocked so if you try to o/c it maybe that will prevent your fc's. I have read in the various threads, of which the community is very helpful, of some issues for heavy users due to the u/c.
Regarding the jedi rom i am a uk 7105 user and to the best of my knowledge i thought it would also work for international 7100 users?!?!
Here is the thread i use.
http://forum.xda-developers.com/showthread.php?t=1987634
reading the op of that thread it would appear you are correct. I do know they are working on version 18 so maybe that will work for you. fingers crossed.
Click to expand...
Click to collapse
Thank You for Your effort!
I'll keep on investigating for a solution.
Unfortunately the real test was horrible with Saber kernel, when I tested it in car the temperature got high soon and the thersholds were low again.
But it's a good idea to try o/c thank You very much!
I'll try it tomorrow, now I have to go to play Cod4... :laugh:
And I found that TWRP is recommended for Saber and a few minutes untouching after the restart so I'll try again.
Have a nice day!
you too bro, sorry i couldnt help more.
but if you post in the saber kernel thread there are some helpful and intelligent folks in there that may have a better solution for you.
enjoy cod
3vo3d said:
you too bro, sorry i couldnt help more.
but if you post in the saber kernel thread there are some helpful and intelligent folks in there that may have a better solution for you.
enjoy cod
Click to expand...
Click to collapse
Thank You again!
I got some experiences with the newest Saber kernel and I like it 'cause the first kernel I can use 100MHz step with and using 300MHz step too.
It seemes to be good at battery consumption too. My only problem that this kernel doesn't support STweaks so I can't regulate charging voltages like I used to. Perhaps only Perseus kernel makes it possible as I can't get any other programs for it till now. Or NEAK kernel and the new versions of AGNi pureSTOCK kernel as I read their pages. I'll try them some day. But Perseus is my favourite.
I think it's important to say that the kernel isn't UC/OC by default so this doesn't make any problems and it's not UV-ed too.
I set min. to 100MHz and max. to 1920MHz to test and it's stable till now. I tried to Overvolt slightly and had no change on media programs behavior they don't like each other as I see.
Trickster Mod is nice 'cause it shows the CPU temperature which was helpful to understand this regulations of thermal control are needed.
When I tested it turned out that CPU is below 70 degrees while the battery temparuture is 'only' about 40 degrees.
So thanks for Your kind advises!
wow. Ok i think i understood most of your post. probably a little bit over my head but i need to learn.
I really like the new kernel im getting 1% battery drain an hour with the screen off which truly is unheard of for me,
The kernel runs real smooth apart from when i play asphalt 8. Or i should say it runs smooth playing the game until the phone tries to do something else. For example if it attempts to update a programme or if a message/email comes through. then the game just lags and i have to wait for the phone to stop multi tasking before the car starts to move normally again.
So im surprised to read you say the kernel isn't uc/uv by default??? I was pretty positive it was. But i dont know for sure and im probably not clever enough to figure it out lol.
I wonder what settings i would need to increase to aid the phone in its multi tasking? Also there must be some kind of programme we could use that would test our specific phone/cpu and tell us which settings it would prefer. As i believe each phone will run slightly different?
You are right i remember reading the kernel does not work with stweaks.
I wish i could work with you and figure out how to optimise our settings but i simply dont have the skill set.
I presume you used trickster to overvolt slightly?
3vo3d said:
wow. Ok i think i understood most of your post. probably a little bit over my head but i need to learn.
I really like the new kernel im getting 1% battery drain an hour with the screen off which truly is unheard of for me,
The kernel runs real smooth apart from when i play asphalt 8. Or i should say it runs smooth playing the game until the phone tries to do something else. For example if it attempts to update a programme or if a message/email comes through. then the game just lags and i have to wait for the phone to stop multi tasking before the car starts to move normally again.
So im surprised to read you say the kernel isn't uc/uv by default??? I was pretty positive it was. But i dont know for sure and im probably not clever enough to figure it out lol.
I wonder what settings i would need to increase to aid the phone in its multi tasking? Also there must be some kind of programme we could use that would test our specific phone/cpu and tell us which settings it would prefer. As i believe each phone will run slightly different?
You are right i remember reading the kernel does not work with stweaks.
I wish i could work with you and figure out how to optimise our settings but i simply dont have the skill set.
I presume you used trickster to overvolt slightly?
Click to expand...
Click to collapse
No, I didn't overvolt at last. But once I tried and didn't helped on my problems.
Unfortunately now I'm back on Perseus kernel again 'cause some issues with Saber. It became crazy every time and locked my CPU on 160MHz only and only reboot helped.
The other issue was the stuck system server process what was active all night and didn't stop hard work.
Now I'm on reading the kernel's page till I get cleverer on it... then I perhaps try it again 'cause I liked it.
http://forum.xda-developers.com/showthread.php?t=2260397&page=5
I have a S4 mini running custom carbon kk unofficial 4.4.3 as it comes with the settings to set CPU's and governors but the phone keeps changing the min to around 1400 but the max stays at 1700.i don't notice until my battery is draining really fast or gets hot. anyone kno a fix to this?
matizkool said:
I have a S4 mini running custom carbon kk unofficial 4.4.3 as it comes with the settings to set CPU's and governors but the phone keeps changing the min to around 1400 but the max stays at 1700.i don't notice until my battery is draining really fast or gets hot. anyone kno a fix to this?
Click to expand...
Click to collapse
Which governor is it using to set a min of 1400? Ever likely it gets hot and eats power! I use f4k's kernel, and the 'Performance Control' app to look at and alter stuff - you don't say what you use or have tried.
There is a Carbon 4.4.4 available with f4ktion 1.5 kernel - might be an idea to flash that and the problem might go away!
xbin said:
Which governor is it using to set a min of 1400? Ever likely it gets hot and eats power! I use f4k's kernel, and the 'Performance Control' app to look at and alter stuff - you don't say what you use or have tried.
There is a Carbon 4.4.4 available with f4ktion 1.5 kernel - might be an idea to flash that and the problem might go away!
Click to expand...
Click to collapse
It's on every governor this happens but I use Wheatley. I would manually set it to around the 300s but in a couple of hours it would auto set at 1400 on its on. This causes my battery to drain my kernel version is 3.4.91 f4ktion 1.4.5 eur lte
matizkool said:
It's on every governor this happens but I use Wheatley. I would manually set it to around the 300s but in a couple of hours it would auto set at 1400 on its on. This causes my battery to drain
Click to expand...
Click to collapse
Strangely enough I've settled with Wheatley too! but it spends most of its time at 162 when not in deep sleep (a bit like me!). This really needs posting in the Carbon thread so I would post a few more things here to help or comment on stuff to get to 10 posts and then ask in there. I can't think what could be causing that behaviour, if it was me it would be bye bye 4.4.3 and hello 4.4.4
xbin said:
Strangely enough I've settled with Wheatley too! but it spends most of its time at 162 when not in deep sleep (a bit like me!). This really needs posting in the Carbon thread so I would post a few more things here to help or comment on stuff to get to 10 posts and then ask in there. I can't think what could be causing that behaviour, if it was me it would be bye bye 4.4.3 and hello 4.4.4
Click to expand...
Click to collapse
Yeah i flashed to 4.4.4 thanks though
Never mind above still happens even though I flashed 4.4.4
matizkool said:
Never mind above still happens even though I flashed 4.4.4
Click to expand...
Click to collapse
Does the actual minimum change rather than it simply running continually at 1400+ and if so which governor does it change to if any!
I read somewhere in the Carbon thread someone was having similar problems so they flashed the kernel twice, one directly after the other; seems something wasn't getting written correctly the first time but was the second, and the problem went away. Worth a go...
xbin said:
Does the actual minimum change rather than it simply running continually at 1400+ and if so which governor does it change to if any!
I read somewhere in the Carbon thread someone was having similar problems so they flashed the kernel twice, one directly after the other; seems something wasn't getting written correctly the first time but was the second, and the problem went away. Worth a go...
Click to expand...
Click to collapse
I found this : Q: CPU/GPU frequency doesn't stick?
A: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel feature that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues.
Is this a fix?
matizkool said:
I found this : Q: CPU/GPU frequency doesn't stick?
A: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel feature that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues.
Is this a fix?
Click to expand...
Click to collapse
It could help. Trickster is good. However, this suggests that there is something else causing or forcing the frequency setting to be changed. The question is what? and I've no idea:crying:
Haha I found the problem it was either this battery saver app or I changed to scheduler to anything besides row
matizkool said:
Haha I found the problem it was either this battery saver app or I changed to scheduler to anything besides row
Click to expand...
Click to collapse
Thats good. It was probably the battery saver because they usually do the opposite!