Help I bricked my phone. I INSTALLED ACID MOD AND IT FAILED!!! MY PHONE ONLY LOADS TO CWM. WHAT SHOULD I DO? IT ALSO CAN USE DOWNLOAD MODE.
Do you have an i747 or i747m? What was the most recent stock ROM on your phone? This is very important to know before flashing stock ROMs from sammobile.com via Odin.
What version of cwm is on your phone?
To get the phone working, you could copy a custom ROM to your SDCard, put the card in your phone, and flash it from cwm.
audit13 said:
Do you have an i747 or i747m? What was the most recent stock ROM on your phone? This is very important to know before flashing stock ROMs from sammobile.com via Odin.
What version of cwm is on your phone?
To get the phone working, you could copy a custom ROM to your SDCard, put the card in your phone, and flash it from cwm.
Click to expand...
Click to collapse
I HAVE MJB2 firmware. Would MJB regular work. I got a Spigen case btw it is a hassle trying to take it off.
What version of cwm is on your phone? Did you try flashing a custom ROM?
I see you have the 4.3 bootloader.
Related
hi, i have a S3 i747 with OTA Update (UCUEMJB) and i rooted it using twrp recovery, but by accident i wiped internal storage, now it said no os, what can i do for repair it?
You can download a custom rom, copy it to a sd card, and flash it in TWRP.
audit13 said:
You can download a custom rom, copy it to a sd card, and flash it in TWRP.
Click to expand...
Click to collapse
thanks for answer, i downloaded the MJ2 rom and do it, it is working 100% but now i have a baseband MJB and a build MJ2, i only flashed the rom, no modem, no boatloader
That's great you got it working. You can now flash 4.4.2 ROMs.
audit13 said:
That's great you got it working. You can now flash 4.4.2 ROMs.
Click to expand...
Click to collapse
I m looking how to go back to stock.
You can try using mobile Odin to flash a stock AT&T ROM and update from there. AT&T never released a complete stock 4.3 ROM, only an update.
Any particular reason you want to go back to stock? It's unlikely you will have a warranty from Samsung since you flashed a custom recovery on a 4.3 ROM which would have tripped the knox counter.
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
So, I'm not a complete noob to flashing roms/rooting devices. I flashed cm 11 to my s3, and decided I wanted to go back to stock via Odin. For some reason when I tried to turn on my device it was still showing the cm 11 splash screen and wouldn't proceed any further. It isn't technically bricked. I guess this would be classified as a boot loop to the nth degree. I tired to boot in recovery mode and wipe the cache partition and all user data to the same cm 11 robot taunting me. When I tried the process (flashing stock vi Odin) again to possibly fix whatever might have been a miss, I got the error message on the download screen "secure check fail: sb12." On the download mode screen it also says I am running the official system rom. I don't know what steps I need to take from here to get my phone to actually boot via the stock rom. Has anybody else had this issue or similar? Any help in resolving this would be greatly appreciated.
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
audit13 said:
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
Click to expand...
Click to collapse
I was under the impression the rom I was attempting to flash was indeed intended for Odin. It is the SGH-I747.
The download screen states,
Product Name: SGH-I747
Custom Binary: Custom
System Status: Official
Qualcom Secure Boot: Enable
Warranty Bit: 1
Bootloader AP SWERV: 2
Here is an added bit of fun, in the midst of the process I accidentally checked "Nand erase all," in Odin at one point.
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
My next question would be how can I move the zip files I download to the internal storage of my phone to flash them through Philz Touch?
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
sjthuss said:
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
Click to expand...
Click to collapse
I did. It said the the device couldn't be updated, or something to that effect.
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
audit13 said:
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
Click to expand...
Click to collapse
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So, I know there is a "thanks," button but I feel like that would be a little too informal for how much I appreciate your help! I downloaded ADB to move the rom (I went with AOKP because it was the first one that worked) to my phone, flashed it using TWRP and...BAM! We are back in business. Thanks for the direction, I thought I had a nice, new, shiny brick on my hands for about two days.
sjthuss said:
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
Click to expand...
Click to collapse
Canadian carriers use the i747m while att users get the i747.
The Canadian carriers did release a full 4.3 ROM unlike att who did not.
Wanting to drop stock(latest) back onto my phone as the person buying it wants that. I want to say I remember reading I needed a newer bootloader for 4.4.2. I got my device on launch and got tired of waiting and went to CM11.
What if anything other than clearing data/cache and flashing the stock deodexed/rooted ROM would I need to do? If there is a bootloader, is it a separate odin file? or flashable .zip?
muqali said:
Wanting to drop stock(latest) back onto my phone as the person buying it wants that. I want to say I remember reading I needed a newer bootloader for 4.4.2. I got my device on launch and got tired of waiting and went to CM11.
What if anything other than clearing data/cache and flashing the stock deodexed/rooted ROM would I need to do? If there is a bootloader, is it a separate odin file? or flashable .zip?
Click to expand...
Click to collapse
If you're on 4.3 still you will have to Odin a stock 4.3 firmware on to the phone. You can not have a custom recovery on the phone so the Odin way will also replace the custom recovery with stock recovery. Then once your phone is stock, you can then take the update to 4.4.2
If I'm not mistaken, you should download the 4.4.2 fw and Odin that on you phone as well. Even though you are Odining your new fw, the phone must be fully stock or that update will still fail.
Eric214 said:
If you're on 4.3 still you will have to Odin a stock 4.3 firmware on to the phone. You can not have a custom recovery on the phone so the Odin way will also replace the custom recovery with stock recovery. Then once your phone is stock, you can then take the update to 4.4.2
If I'm not mistaken, you should download the 4.4.2 fw and Odin that on you phone as well. Even though you are Odining your new fw, the phone must be fully stock or that update will still fail.
Click to expand...
Click to collapse
Well I was on 4.3 stock then went to Cyanogen 4.4.2. I've now got the deodexed/rooted stock 4.4.2 from the forum here and was able to boot it using leankernel. It works and the buyer is satisfied with it. He know how to flash updated ROMs so he can change later anyway. Thanks for the response though, I was thinking noone was gonna answer.
re: latest stock rom
muqali said:
Wanting to drop stock(latest) back onto my phone as the person buying it wants that. I want to say I remember reading I needed a newer bootloader for 4.4.2. I got my device on launch and got tired of waiting and went to CM11.
What if anything other than clearing data/cache and flashing the stock deodexed/rooted ROM would I need to do? If there is a bootloader, is it a separate odin file? or flashable .zip?
Click to expand...
Click to collapse
If you want the newest/latest official stock N900T KitKat firmware why not do the following:
You need to download and Odin flash the official stock KitKat N900T NE6 firmware.
Here is the direct fast download link for it:
http://www.androidfilehost.com/?fid=23501681358537528
The above zip file also contains Odin, CF-Autoroot and TWRP 2.7.0.1 recovery.
Be sure to go into recovery before Odin flashing NE6 and do a factory data reset
and a full wipe. Optional: Then Odin flash cf-autoroot and the TWRP 2.7.0.1.
If you want more information and or instructions here is the link:
http://forum.xda-developers.com/show...60&postcount=2
If you want the older official stock N900T 4.4.2 NB4 KitKat rom you can
download it from: http://tekunix.com/downloads/TMB-N900TUVUCNB4-20140305155920.zip
and Odin flash it instead of the stock NE6 official N900T firmware.
Both the older and newer official Kitkat stock roms come with the required bootloaders/baseband.
Good luck!
Misterjunky said:
If you want the newest/latest official stock N900T KitKat firmware why not do the following:
You need to download and Odin flash the official stock KitKat N900T NE6 firmware.
Here is the direct fast download link for it:
http://www.androidfilehost.com/?fid=23501681358537528
The above zip file also contains Odin, CF-Autoroot and TWRP 2.7.0.1 recovery.
Be sure to go into recovery before Odin flashing NE6 and do a factory data reset
and a full wipe. Optional: Then Odin flash cf-autoroot and the TWRP 2.7.0.1.
If you want more information and or instructions here is the link:
http://forum.xda-developers.com/show...60&postcount=2
If you want the older official stock N900T 4.4.2 NB4 KitKat rom you can
download it from: http://tekunix.com/downloads/TMB-N900TUVUCNB4-20140305155920.zip
and Odin flash it instead of the stock NE6 official N900T firmware.
Both the older and newer official Kitkat stock roms come with the required bootloaders/baseband.
Good luck!
Click to expand...
Click to collapse
So clear data/factory reset and clear cache in recovery. Reboot into download and flash NE6, then cf-autoroot, then TWRP? I didn't see you say exactly when to flash NE6.
Hey guys,
I was running Cyanogenmod 11 for a while which I installed using the automatic tool online. During the summer I flashed Dirty Unicorns but I have issues with the camera and random rebooting. I just got a Galaxy Gear for Christmas and I've read that its only compatible with touchwiz roms.
I'm trying to go back to stock and I am ok with losing my root access.
I have an SGH-1747m on Baseband I747MVLUEMK5 and my service provider is Bell. The android version is 4.4.4 currently. Whats the easiest method to do this? I've read some concerning information that going back to an earlier version of android will soft brick your phone, but I believe the most current Bell firmware is still in Jelly Bean.
Is it as easy as downloading the correct firmware and flashing it using Clockworkmod Recovery?
Thanks
You should download the stock ROM from sammobile.com and flash it in Odin to get back to stock.
audit13 said:
You should download the stock ROM from sammobile.com and flash it in Odin to get back to stock.
Click to expand...
Click to collapse
The latest version available for my baseband is 4.3. Will I run into problems going from 4.4.4 to 4.3?
Flashing in Odin will flash everything, including the bootloader and modem.
audit13 said:
Flashing in Odin will flash everything, including the bootloader and modem.
Click to expand...
Click to collapse
Thanks. So if I'm understanding correctly I just flash the latest firmware released by my carrier (4.4.2)? Is there anything else to watch out for when choosing the firmware?
Also, before flashing should I make a backup with Clockwork Recovery or any other program? Will Clockwork Recovery still be present after flashing with ODIN?
ZombieLee said:
Thanks. So if I'm understanding correctly I just flash the latest firmware released by my carrier (4.4.2)? Is there anything else to watch out for when choosing the firmware?
Also, before flashing should I make a backup with Clockwork Recovery or any other program? Will Clockwork Recovery still be present after flashing with ODIN?
Click to expand...
Click to collapse
Yes, flash the latest firmware for your phone. Be sure it's firmware for the i747m and not anything else. Always make a backup if you ever screw up or want to go back to where you are now. You will lose everything by flashing the stock firmware with ODIN, even clockwork mod recovery.
Thanks. When I made a backup before going to Dirty Unicorns I used Clockwork Recovery. If Clockwork will be deleted by flashing with ODIN, how would I utilize that backup if I needed it? Should I use another program to back up?
EDIT: I flashed it and everything went smoothly. Sincere thanks to everyone who gave me help!