Develop Bugs

Issues after CM 10.2 install on Galaxy Grand

Hello
Just finished installing CM10.2 on my galaxy grand using
4.2-THL-CWM-Touch-6.0.3.6-Baffin-Odin for recovery (tanx to iceyhotguy & kenxda33 ),
cm-10.2-20131117-UNOFFICIAL-baffin, and
gapps-jb-20130813-signed.
CM 10.2 is truly amazing and beautiful, but
- only one sim is active, 2nd sim not activated
- can't access external SD card (tried mounting SD card, but doesn't work)
- can't receive a call or dial out, - phone reboots each time
Please is there a work around for fixing these issue?
Also, is there a way to get back to the stock 4.2.2?
Tanx
georgenibe

Hey guys
Just to add that my galaxy grand is unrooted.
Tanx.
georgenibe

georgenibe said:
Hello
Just finished installing CM10.2 on my galaxy grand using
4.2-THL-CWM-Touch-6.0.3.6-Baffin-Odin for recovery (tanx to iceyhotguy & kenxda33 ),
cm-10.2-20131117-UNOFFICIAL-baffin, and
gapps-jb-20130813-signed.
CM 10.2 is truly amazing and beautiful, but
- only one sim is active, 2nd sim not activated
- can't access external SD card (tried mounting SD card, but doesn't work)
- can't receive a call or dial out, - phone reboots each time
Please is there a work around for fixing these issue?
Also, is there a way to get back to the stock 4.2.2?
Tanx
georgenibe
Click to expand...
Click to collapse
First, if you are on CM10.2, your grand is not unrooted like you mentioned in post #2. Your phone was rooted when you completed flashing recovery and SuperSU
Secondly, CM10.2 is an under-development ROM, and currently supports only 1 SIM. And yes phone reboot is an issue they are trying to solve at the moment. It's only available so users can test and report back what's working in the new build and provide logcats so they look the problem.
The externalSD card issue has been solved in the recent builds already
To get back on stock you will need to flash the 4.2.2 firmware through Odin or flash any 4.2.2 stock-based ROM like GENNXT, RVR's stock based ROM or X-PeriaZ flavor through CWM recovery
If you flash your firmware again, you will have to repeat the recovery flashing method (this will have have to do done whenever you flashing any firmware through Odin)
GENNXT - http://forum.xda-developers.com/showthread.php?t=2196558
XperiaZ Flavor - http://forum.xda-developers.com/showthread.php?t=2304492
RVR - http://forum.xda-developers.com/showthread.php?t=2537603
Firmware - http://samsung-updates.com/device/?id=GT-I9082
EDIT : You can also simply flash Indian firmware September 09 version 4.2.2 I9082XXUBMI1 as a ROM from here : http://forum.xda-developers.com/showthread.php?t=2340562

abc

iceyhotguy said:
First, if you are on CM10.2, your grand is not unrooted like you mentioned in post #2. Your phone was rooted when you completed flashing recovery and SuperSU
Secondly, CM10.2 is an under-development ROM, and currently supports only 1 SIM. And yes phone reboot is an issue they are trying to solve at the moment. It's only available so users can test and report back what's working in the new build and provide logcats so they look the problem.
The externalSD card issue has been solved in the recent builds already
To get back on stock you will need to flash the 4.2.2 firmware through Odin or flash any 4.2.2 stock-based ROM like GENNXT, RVR's stock based ROM or X-PeriaZ flavor through CWM recovery
If you flash your firmware again, you will have to repeat the recovery flashing method (this will have have to do done whenever you flashing any firmware through Odin)
GENNXT - http://forum.xda-developers.com/showthread.php?t=2196558
XperiaZ Flavor - http://forum.xda-developers.com/showthread.php?t=2304492
RVR - http://forum.xda-developers.com/showthread.php?t=2537603
Firmware - http://samsung-updates.com/device/?id=GT-I9082
EDIT : You can also simply flash Indian firmware September 09 version 4.2.2 I9082XXUBMI1 as a ROM from here : http://forum.xda-developers.com/showthread.php?t=2340562
Click to expand...
Click to collapse
Hi iceyhotguy
Tanx for the info. Very helpful. I'll follow your suggestion. Please does GENNXT support dual sim?
I'll be on the lookout for when the dual sim issue is fixed in CyanogenMod.
Many tanx.
georgenibe

iceyhotguy said:
First, if you are on CM10.2, your grand is not unrooted like you mentioned in post #2. Your phone was rooted when you completed flashing recovery and SuperSU
Secondly, CM10.2 is an under-development ROM, and currently supports only 1 SIM. And yes phone reboot is an issue they are trying to solve at the moment. It's only available so users can test and report back what's working in the new build and provide logcats so they look the problem.
The externalSD card issue has been solved in the recent builds already
To get back on stock you will need to flash the 4.2.2 firmware through Odin or flash any 4.2.2 stock-based ROM like GENNXT, RVR's stock based ROM or X-PeriaZ flavor through CWM recovery
If you flash your firmware again, you will have to repeat the recovery flashing method (this will have have to do done whenever you flashing any firmware through Odin)
GENNXT - http://forum.xda-developers.com/showthread.php?t=2196558
XperiaZ Flavor - http://forum.xda-developers.com/showthread.php?t=2304492
RVR - http://forum.xda-developers.com/showthread.php?t=2537603
Firmware - http://samsung-updates.com/device/?id=GT-I9082
EDIT : You can also simply flash Indian firmware September 09 version 4.2.2 I9082XXUBMI1 as a ROM from here : http://forum.xda-developers.com/showthread.php?t=2340562
Click to expand...
Click to collapse
Oh!
Just to add that I did only the flashing recovery on my grand, but didn't run SuperSU.
Cheers.
georgenibe

georgenibe said:
Hi iceyhotguy
Tanx for the info. Very helpful. I'll follow your suggestion. Please does GENNXT support dual sim?
I'll be on the lookout for when the dual sim issue is fixed in CyanogenMod.
Many tanx.
georgenibe
Click to expand...
Click to collapse
Yes all three mentioned above are stock based and support dual SIM including GENNXT. Usually all stock based ROMs support dual SIM

This rom is not fully stable .....
Sent from my GT-I9082 using XDA Premium 4 mobile app

Post GENNXT_J4 Installation: language NOT English
iceyhotguy said:
Yes all three mentioned above are stock based and support dual SIM including GENNXT. Usually all stock based ROMs support dual SIM
Click to expand...
Click to collapse
Hello guys
Post installing GENNXT_J4, the phone language on reboot was NOT English.
Flashed Update-SuperSU -1.65 to root
Installed GENNXT_J4,
Installed gapps-jb-20130301
Installation was successful
Not sure why the language on reboot is NOT English
georgenibe

GENNXT_J4 Installation
georgenibe said:
Hello guys
Post installing GENNXT_J4, the phone language on reboot was NOT English.
Flashed Update-SuperSU -1.65 to root
Installed GENNXT_J4,
Installed gapps-jb-20130301
Installation was successful
Not sure why the language on reboot is NOT English
georgenibe
Click to expand...
Click to collapse
Hey guys
PLEASE ignore my last post.
I have selected the English language. So, all's good. Apologies.
georgenibe

[tutorial] [micromax a120][wiko rainbow][myphone aguario][BLU Studio 5.0 C HD]

This is a full tutorial for Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C,MyPhone Agua Rio, with rooting, custom recovery and custom rom STEP BY STEP installation.
IF YOU HAVE BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C, MyPhone Agua Rio, BACKUP YOUR IMEI
DOWNLOAD:MTK DROID TOOLS
STEP 1 FOR Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C, MyPhone Agua Rio
1-WIKO KITKAT V13 download it here:v13 appears v8 as i said..this is v13 wiko rainbow firmware uploaded by me from OFFICIAL rom..so even it says v8 you know that this is the correct version..flash it with SP FLASHTOOLS:https://www.androidfilehost.com/?fid=23991606952609461
2-extract folder and run SP FLASH TOOLS
3-when rom boots, root the rom and install custom recovery.
4-root HERE:https://www.androidfilehost.com/?fid=23991606952609407
5-extract with winrar and install root as normal apk.
6-install custom recovery :] with flashify or SP FLASHTOOLS like in my video tutorial.
PHILZ RECOVERY KITKAT:https://www.androidfilehost.com/?fid=23991606952592789
TWRP 2.8.2 KITKAT:https://www.androidfilehost.com/?fid=95916177934552002
SP FLASHTOOLS HERE
ADB DRIVERS
step 1 only needed for first time installing a custom kitkat rom for WIKO BASE kitkat
STEP 2-for all custom roms KITKAT after having root and custom recovery
A)enter recovery and backup the stock rom
B) wipe data/factory reset
C) wipe cache and dalvik cache
D)install zip from sd card -your custom rom
CUSTOM ROMS FOR WIKO BASE AVAILABLE:https://www.youtube.com/playlist?list=PLVddAFJHtD21TsCvr7uthGJmpkeQ9G_I0
CUSTOM KERNEL by @moonrotation HERE:http://forum.xda-developers.com/android/general/kernel-wr-kernel-wiko-rainbow-clones-t3003920

if you have MMX 120 C2C FOTA ,stock kk or MYPHONEAGUARIO, EXPLAY FRESH, QMOBILE i9 and want to install a custom rom KITKAT for wiko base firmware see this small video:
in the description you have all download links you need and all on video tutorials very easy to understand.

HOW TO INSTALL CUSTOM RECOVERY:
PHILZ RECOVERY KITKAT:http://d-h.st/2gu3
TWRP 2.8.2 KITKAT:http://smokermanxda.blogspot.pt/2015/04/twrp-282-with-otg-support.html
CARLIV KK :http://d-h.st/Wl6i
new TWRP released..
downloads:download here!

Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C,MyPhone Agua Rio
ALL CUSTOM ROMS HERE:
http://forum.xda-developers.com/t/micromax-a120

Hey nice work buddy

Hey bro,
Good work :highfive:
Much more organised now.

yes..its a bit annoying having all splitted..i have to bookmark threads cause i cant find it one by one..i will add all custom roms here for our phones.

smokerman said:
yes..its a bit annoying having all splitted..i have to bookmark threads cause i cant find it one by one..i will add all custom roms here for our phones.
Click to expand...
Click to collapse
Yeah! v should have a proper thread where v can find most of the tutors and almost all roms so no need to keep on searching..

CUSTOM KITKAT ROMS FOR WIKO BASE KITKAT:
original thread here by me:http://forum.xda-developers.com/android/development/rom-slimpop-t3077197
original thread here by @umangleekha :http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2863614
original thread here, this rom you can put CM11 THEMES by @mr-illusionist :http://forum.xda-developers.com/android/development/mt6582-ansp-v4-rom-t3056928
original thread here by @vibhu0009 :http://forum.xda-developers.com/android/development/vionicl-t3017145
all new roms and video rreviews HD:
http://smokermanxda.blogspot.pt/
https://www.youtube.com/user/blueangelman13

#edited.

updated.:good:

I need your help...
Hey there!
jd1639 gave me the advice to post my problem in this thread rather than wait for an answer in the xda-assist thread. For not having to write it all again, here is a link to the post I made: http://forum.xda-developers.com/general/xda-assist/unbrick-wiko-rainbow-t3108133 . Seems like noone is able to help me on that issue, but I hope for your knowledge to come up with a solution...
Is it possible to use an update.zip to fix it? Thought of packing the whole stock-rom into a zip-file, rename and install it, and everything would be fine again. Tried to do so, but when I pick the "apply update from sdcard"-option in recovery menu, the system partition is shown instead of the sd card storage, and I don't know how to put the zip onto sys without adb.
If not even a pro like you knows a solution for this, do you think it is still possible to recognize, that I tried to install a custom firmware? Otherwise I could return it to Wiko and hope for a replacement!
Thank you for arguing with my problem by now, please let me know what you think about it.
Regards,
Metal-Moe

@Metal-Moe so let me try to help you..
you have 2 methods:
1.official tool
what you must do? connect your phone and run JB version (it appears v14 on wiko site)..i assume you know how to it.#see below the pictures and minitutorial.
charge your battery to full, this is important!! see if the software recognize your WIKO..run this drivers:https://www.androidfilehost.com/?fid=95916177934554018 and try to connect and reconnect your WIKO in different USB ports after you installed the drivers. (install anyway if appears a security warning)
2.SPFLASHTOOLS-.if doesnt work try the same method but with SP FLASHTOOLS..even in my computer sometimes doesnt recognize when testing developer roms..and i do that ..works for me..you just need to be patient and keep trying..one of the usb ports will work for sure..after it works flash stock JB and see if your IMEI is back..at least have your phone back to life..to restore your IMEI you have many methods..just PM or mention me to have a more faster answer..first lets see if we can bring back your phone from the dead.:good:
note:stock JB makes a folder inside that is SP FLASHABLE like this:

Members. If you report something, and disagree with the outcome of the report, pm the Moderator to discuss.
Do not come back to thread to start trouble.
Thanks,
Darth
Forum Moderator

removed all dev-host links..reuploaded to androidfilehosting.

Thanks anyway!
@smokerman: Unfortunately I wasn't able to solve the problem with the possible solutions you'd mentioned, so I brought the bricked phone back to the local store, hoping it wouldn't be returned unrepaired due to guarantee loss. Two weeks later I got it back and it's working fine! But thank you for your effort in helping me anyway!
Now I'll backup the IMEI with MobileUncle before doing anything else!

Metal-Moe said:
@smokerman: Unfortunately I wasn't able to solve the problem with the possible solutions you'd mentioned, so I brought the bricked phone back to the local store, hoping it wouldn't be returned unrepaired due to guarantee loss. Two weeks later I got it back and it's working fine! But thank you for your effort in helping me anyway!
Now I'll backup the IMEI with MobileUncle before doing anything else!
Click to expand...
Click to collapse
and from that time i ve posted 2 more solutions for IMEI, easy..http://smokermanxda.blogspot.pt/2015/05/fix-imei-wiko-rainbow-micromax-a120.html
and:http://smokermanxda.blogspot.pt/2015/05/how-to-restore-imei-on-any-mtk65xx.html

Thanks for this great tutorial man....

@smokerman I have successfully flashed wiko base firmware v10 with this tutorial... Thanks again..
There is a ota update available from wiko..system>about>update
If i update..will it further change the firmware to latest version v13...or do i need to flash the whole package of v13 for the latest version...

niyas90 said:
@smokerman I have successfully flashed wiko base firmware v10 with this tutorial... Thanks again..
There is a ota update available from wiko..system>about>update
If i update..will it further change the firmware to latest version v13...or do i need to flash the whole package of v13 for the latest version...
Click to expand...
Click to collapse
if you have root and recovery probably you cant update..it will give you a error..but here it is v13 to flash with SP FLASHTOOLS:
v13 appears v8 as i said..this is v13 wiko rainbow firmware uploaded by me from OFFICIAL rom..so even it says v8 you know that this is the correct version..flash it with SP FLASHTOOLS:https://www.androidfilehost.com/?fid=23991606952609461

Need Rom Help

Hi there I am totally new here and have never experienced with roms etc things! I am requesting all please help me with rom I have Gt-i9082 but it's lagging too much that i am tired of it! i searched on internet and come up with that new rom fixes the lag and make the grand work smoothly and i have been referred blisspop so i searched for blisspop and found too many please help me to find the correct rom that is stable and works smooth! And lease do tell me how to install that rom on my grand! Thanks In Advance!

Ashish Dawani said:
Hi there I am totally new here and have never experienced with roms etc things! I am requesting all please help me with rom I have Gt-i9082 but it's lagging too much that i am tired of it! i searched on internet and come up with that new rom fixes the lag and make the grand work smoothly and i have been referred blisspop so i searched for blisspop and found too many please help me to find the correct rom that is stable and works smooth! And lease do tell me how to install that rom on my grand! Thanks In Advance!
Click to expand...
Click to collapse
Check as per your model number from this:
Official: http://downloads.blissroms.com/Bliss/Official/
Maintenance Builds: http://downloads.blissroms.com/Bliss/Maintenance/
Otherwise the BlissPop 3.7.. : https://drive.google.com/file/d/0By_8WOnwLna7WU9lOU5NQmdRTXc/view?usp=docslist_api
Hope this helps
---------- Post added at 03:40 AM ---------- Previous post was at 03:14 AM ----------
Oh, and sorry, missed out on how to root and install:
For rooting just go step by step on this link:
http://forum.xda-developers.com/showthread.php?t=2294734
In case you face trouble with: Make sure only 'Auto reboot' and 'F.Reset Time' is checked, then please uncheck the 'Auto-Reboot', and try. It will work. I would suggest not to reboot, and install SuperSu [The latest SuperSu can be found here: http://d-h.st/IFy7 [APK File for people wanting APK post rooting and flashing]; http://d-h.st/LYsj [RAR file for Flashing for the first time in Recovery mode].
Triangle Away latest: http://d-h.st/8anG
Post the Rooting, please install the ZIP file of ROM and the GApps via Flash. Also, ensure that you install both the ROM & GApps without rebooting. Via Flash means copy to external SD card and then from Recovery mode install zip from sd card.
Hope this helps

CWM Recovery - http://d-h.st/MlVf [ZIP file]
CWM Recovery - http://d-h.st/31qx [MD5 file]
In case you require it..

[ROM][DPLT] STOCK Official Android 7.0

This is a purestock ROM of the official android 7.0 release. Not any modifications or app removals has been made, it also isn't rooted (you can flash SuperSU if you want). This rom has the bootloader, modem, kernel and all the system files from the DPLT build. This is only for G930F! This rom feels extremely smooth and stable.
Before Download please make sure that am not responsible if anything happens to your device.
Since I have a G935F I'm not able to test this ROM on G930F but it should work. Please let me know if not.
DOWNLOAD:
https://drive.google.com/file/d/0B4ZWp6etwAPeR2FXckRVMlV1clk/view?usp=sharing
INSTALL:
Just flash it with TWRP

Reserved 1

Reserved 2

Thanks for the upload pal. I'll give it a try tonight!!

Wich is default csc here?

Thanks a lot for that, man. Its always good to have a stock flashable ROM.

Tested on G930FD
Resuilt: Failed.
Error: symlinks failed.

confirmdnt said:
Tested on G930FD
Resuilt: Failed.
Error: symlinks failed.
Click to expand...
Click to collapse
I have a G930F
Same result as you.

no luck on w8 , got it to install just booted back to twrp

i rebulid rom stock deodex DPLT . everyone test
link f930F: https://drive.google.com/open?id=0B8w7700fZlaXYTBVaXRkTVRxQW8.
very flash after people reported i

I can flash the ROM, but the touchscreen does not respond and the whole screen is blue.

I recommend going on SAMmobile.com and downloading it from there. I can provide a link to a video tutorial if needed. It uses Odin but works perfectly. I am using it now.

i have one question, it is not reffered to topic exactly but i dont know how to flash stock firmware on S7..
i had S5 and S6 and when downloaded firmware and extract zip folder it was normally for example G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar which wash flashed to AP/PDA field.
but now i downloaded stock france 7.0 for S7 and when unpack rar, there are 5 files.. which to flash?
AP_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship_meta.tar 4.2 gb
BL_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship.tar 5 mb
CP_G930FXXU1DQC2_CL443934_QB5909108_SIGNED.tar 44 mb
CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
HOME_CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
thanks.

tinko975 said:
i have one question, it is not reffered to topic exactly but i dont know how to flash stock firmware on S7..
i had S5 and S6 and when downloaded firmware and extract zip folder it was normally for example G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar which wash flashed to AP/PDA field.
but now i downloaded stock france 7.0 for S7 and when unpack rar, there are 5 files.. which to flash?
AP_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship_meta.tar 4.2 gb
BL_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship.tar 5 mb
CP_G930FXXU1DQC2_CL443934_QB5909108_SIGNED.tar 44 mb
CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
HOME_CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
thanks.
Click to expand...
Click to collapse
Using Odin every tar is his related part. (AP in AP... BL in BL and so on)

Hey guys, will this work on the samsung galaxy nexus, model GT-I9250M? I've been trying to find a stock android 7 rom for it, and this is the closest thing I can find. Thanks!

mkalter said:
This is a purestock ROM of the official android 7.0 release. Not any modifications or app removals has been made, it also isn't rooted (you can flash SuperSU if you want). This rom has the bootloader, modem, kernel and all the system files from the DPLT build. This is only for G930F! This rom feels extremely smooth and stable.
Before Download please make sure that am not responsible if anything happens to your device.
Since I have a G935F I'm not able to test this ROM on G930F but it should work. Please let me know if not.
DOWNLOAD:
https://drive.google.com/file/d/0B4ZWp6etwAPeR2FXckRVMlV1clk/view?usp=sharing
INSTALL:
Just flash it with TWRP
Click to expand...
Click to collapse
hey bro the link doesnt work can you reupload?

Download Android 10 (Q) update for Galaxy M305M - Stock & Patched ROM

Does anyone know where I can get the latest Android 10 (Q) M30M Stock & Patched ROM. I see the M305F Rom but not ther M305M Rom.
Thanks

Hi, you can get stock rom for Samsung galaxy SM-M30M from sammobile.com

tennyson24 said:
Does anyone know where I can get the latest Android 10 (Q) M30M Stock & Patched ROM. I see the M305F Rom but not ther M305M Rom.
Thanks
Click to expand...
Click to collapse
Do you use Windows? Is yes, stock you can download, and you can patch yourself. You only need a "lot of patience" for downloads, patching and installation. Plus if you follow the steps accurately, it will work perfectly. Let me know, and I will guide you. PM may not come, as I have nearly reached my PM limit.